Recent advances in synthetic methods and applications of photo-luminescent molecularly imprinted polymers

The Evaluation of Clinical Applications for the Detection of the Alzheimer's Disease Biomarker GFAP

One of the most prevalent neurodegenerative diseases is Alzheimer's disease (AD). The hallmarks of AD include the accumulation of amyloid plaques and neurofibrillary tangles, which cause related secondary diseases, progressive neurodegeneration, and ultimately death. The most prevalent cell type in the human central nervous system, astrocytes, are crucial for controlling neuronal function. Glial fibrillary acidic protein (GFAP) is released from tissue into the bloodstream due to astrocyte breakdown in neurological diseases. Increased levels of GFAP in the serum can function as blood markers and be an effective prognostic indicator to help diagnose neurological conditions early on, from stroke to neurodegenerative diseases. The human central nervous system (CNS) is greatly affected by diseases associated with blood GFAP levels. These include multiple sclerosis, intracerebral hemorrhage, glioblastoma multiforme, traumatic brain injuries, and neuromyelitis optica. GFAP demonstrates a strong diagnostic capacity for projecting outcomes following an injury. Furthermore, the increased ability to identify GFAP protein fragments helps facilitate treatment, as it allows continuous screening of CNS injuries and early identification of potential recurrences. GFAP has recently gained attention due to data showing that the plasma biomarker is effective in identifying AD pathology. AD accounts for 60-70% of the approximately 50 million people with dementia worldwide. It is critical to develop molecular markers for AD, whose number is expected to increase to about 3 times and affect humans by 2050, and to investigate possible targets to confirm their effectiveness in the early diagnosis of AD. In addition, most diagnostic methods currently used are image-based and do not detect early disease, i.e. before symptoms appear; thus, treatment options and outcomes are limited. Therefore, recently developed methods such as point-of-care (POC), on-site applications, and enzyme-linked immunosorbent assay-polymerase chain reaction (ELISA-PCR) that provide both faster and more accurate results are gaining importance. This systematic review summarizes published studies with different approaches such as immunosensor, lateral flow, POC, ELISA-PCR, and molecularly imprinted polymer using GFAP, a potential blood biomarker to detect neurological disorders. Here, we also provide an overview of current approaches, analysis methods, and different future detection strategies for GFAP, the most popular biosensing field.

Sensors Based on Molecularly Imprinted Polymers in the Field of Cancer Biomarker Detection: A Review

Biomarkers play a pivotal role in the screening, diagnosis, prevention, and post-treatment follow-up of various malignant tumors. In certain instances, identifying these markers necessitates prior treatment due to the complex nature of the tumor microenvironment. Consequently, advancing techniques that exhibit selectivity, specificity, and enable streamlined analysis hold significant importance. Molecularly imprinted polymers (MIPs) are considered synthetic antibodies because they possess the property of molecular recognition with high selectivity and sensitivity. In recent years, there has been a notable surge in the investigation of these materials, primarily driven by their remarkable adaptability in terms of tailoring them for specific target molecules and integrating them into diverse analytical technologies. This review presents a comprehensive analysis of molecular imprinting techniques, highlighting their application in developing sensors and analytical methods for cancer detection, diagnosis, and monitoring. Therefore, MIPs offer great potential in oncology and show promise for improving the accuracy of cancer screening and diagnosis procedures.

Towards molecularly imprinted polymers that respond to and capture phosphorylated tyrosine epitopes using fluorescent bis-urea and bis-imidazolium receptors

Early detection of cancer is essential for successful treatment and improvement in patient prognosis. Deregulation of post-translational modifications (PTMs) of proteins, especially phosphorylation, is present in many types of cancer. Therefore, the development of materials for the rapid sensing of low abundant phosphorylated peptides in biological samples can be of great therapeutic value. In this work, we have synthesised fluorescent molecularly imprinted polymers (fMIPs) for the detection of the phosphorylated tyrosine epitope of ZAP70, a cancer biomarker. The polymers were grafted as nanometer-thin shells from functionalised submicron-sized silica particles using a reversible addition-fragmentation chain-transfer (RAFT) polymerisation. Employing the combination of fluorescent urea and intrinsically cationic bis-imidazolium receptor cross-linkers, we have developed fluorescent sensory particles, showing an imprinting factor (IF) of 5.0. The imprinted polymer can successfully distinguish between phosphorylated and non-phosphorylated tripeptides, reaching lower micromolar sensitivity in organic solvents and specifically capture unprotected peptide complements in a neutral buffer. Additionally, we have shown the importance of assessing the influence of counterions present in the MIP system on the imprinting process and final material performance. The potential drawbacks of using epitopes with protective groups, which can co-imprint with targeted functionality, are also discussed.

Nanomaterial-based fluorescent biosensors for the detection of antibiotics in foodstuffs: A review

Antibiotics are widely used as bacteriostatic or bactericidal agents against various microbial infections in humans and animals. The excessive use of antibiotics has led to an accumulation of their residues in food products, which ultimately poses a threat to human health. In light of the shortcomings of conventional methods for antibiotic detection (primarily cost, proficiency, and time-consuming procedures), the development of robust, accurate, on-site, and sensitive technologies for antibiotic detection in foodstuffs is important. Nanomaterials with amazing optical properties are promising materials for developing the next generation of fluorescent sensors. In this article, advances in detecting antibiotics in food products are discussed with respect to their sensing applications, with a focus on fluorescent nanomaterials such as metallic nanoparticles, upconversion nanoparticles, quantum dots, carbon-based nanomaterials, and metal-organic frameworks. Furthermore, their performance is evaluated to promote the continuation of technical advances.

Molecularly imprinted polymers for per- and polyfluoroalkyl substances enrichment and detection

Per- and polyfluoroalkyl substances (PFAS) are highly toxic pollutants of significant concern as they are being detected in water, air, fish and soil. They are extremely persistent and accumulate in plant and animal tissues. Traditional methods of detection and removal of these substances use specialised instrumentation and require a trained technical resource for operation. Molecularly imprinted polymers (MIPs), polymeric materials with predetermined selectivity for a target molecule, have recently begun to be exploited in technologies for the selective removal and monitoring of PFAS in environmental waters. This review offers a comprehensive overview of recent developments in MIPs, both as adsorbents for PFAS removal and sensors that selectively detect PFAS at environmentally-relevant concentrations. PFAS-MIP adsorbents are classified according to their method of preparation (e.g., bulk or precipitation polymerization, surface imprinting), while PFAS-MIP sensing materials are described and discussed according to the transduction methods used (e.g., electrochemical, optical). This review aims to comprehensively discuss the PFAS-MIP research field. The efficacy and challenges facing the different applications of these materials in environmental water applications are discussed, as well as a perspective on challenges for this field that need to be overcome before exploitation of the technology can be fully realised.

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Cellulose-based hydrogel on quantum dots with molecularly imprinted polymers for the detection of CA19-9 protein cancer biomarker

Molecularly imprinted polymers MIPs were successfully assembled around quantum dots (QDs), for the detection of the protein biomarker CA19-9 associated to pancreatic cancer (PC). These imprinted materials MIP@QDs were incorporated within the cellulose hydrogel with retention of its conformational structure inside the binding cavities. The concept is to use MIPs which function as the biorecognition elements, conjugated to cadmium telluride QDs as the sensing system. The excitation wavelength was set to 477 nm and the fluorescence signal was measured at its maximum intensity, with an emission range between 530 and 780 nm. The fluorescence quenching of the imprinted cellulose hydrogels occurred with increasing concentrations of CA19-9, showing linearity in the range 2.76 × 10 ^-2 - 5.23 × 10 ² U/ml, in a 1000-fold diluted human serum. Replicates of the imprinted hydrogel show a linear response below the cut-off values for pancreatic cancer diagnosis (< 23 U/ml), a limit of detection of 1.58 × 10 ^-3 U/ml and an imprinting factor (IF) of 1.76. In addition to the fact that the imprinted cellulose hydrogel displays good stability and selectivity towards CA19-9 when compared with the non-imprinted controls, the conjugation of MIPs to QDs increases the sensitivity of the system for an optical detection method towards ranges within clinical significance. This fact shows potential for the imprinted hydrogel to be applied as a sensitive, low-cost format for point-of-care tests (PoCTs).

Synthesis of surface protein-imprinted nanoparticles based on metal coordination and anchored carbon dots for enhanced fluorescence detection

Molecularly imprinted polymers endowed with photo-luminescent properties have attracted wide research interest in many fields such as biological analysis and diseases diagnosis. Herein, we illustrate a versatile method for the construction of surface protein-imprinted nanoparticles based on metal coordination and anchored carbon dots (CDs) for enhanced fluorescence detection of the target protein. As the fluorescent nanosupports for surface imprinting, CDs-attached SiO₂ nanoparticles were synthesized via thiol-ene click chemistry. With histidine (His)-exposed protein as templates, imprinted nanoshells were formed over the nanosupports via copolymerization of a Cu²⁺-chelating monomer and an oligo (ethylene glycol) monomer, hence producing high-quality imprinted cavities because of both the relatively strong coordination and inhibited non-specific binding. Using lysozyme as a model His-exposed template, the imprinted nanoparticles showed fluorescence enhancement while binding the target protein, and exhibited significantly increased specific fluorescence response than the controls without the metal coordination. They achieved a high imprinting factor of 5.8 and a low limit of detection of 10.1 nM. Furthermore, such sensors were applied to determine lysozyme in diluted chicken egg-white samples with satisfactory recoveries at three spiking levels ranging from 97.9 to 101.4%. Human serum albumin was also used as another template protein for preliminary confirming the generality of the presented strategy.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

Synthesis of an organic phosphoric acid-based multilayered SERS imprinted sensor for selective detection of dichlorophenol

A novel SERS imprinted sensor (AIM@MIPs) was prepared, which could improve the detection ability of analysis detection. The AIM@MIPs presented sensitive and selective detection property to 2,6-DCP.

Nitrogen-doped graphene quantum dots coated with molecularly imprinted polymers as a fluorescent sensor for selective determination of warfarin

The strong photoluminescence of NGQDs and the selectivity of MIPs were combined to construct a fluorescent sensor for rapid determination of warfarin.

A Review on Silver Nanoparticles: Classification, Various Methods of Synthesis, and Their Potential Roles in Biomedical Applications and Water Treatment

Recent developments in nanoscience have appreciably modified how diseases are prevented, diagnosed, and treated. Metal nanoparticles, specifically silver nanoparticles (AgNPs), are widely used in bioscience. From time to time, various synthetic methods for the synthesis of AgNPs are reported, i.e., physical, chemical, and photochemical ones. However, among these, most are expensive and not eco-friendly. The physicochemical parameters such as temperature, use of a dispersing agent, surfactant, and others greatly influence the quality and quantity of the synthesized NPs and ultimately affect the material’s properties. Scientists worldwide are trying to synthesize NPs and are devising methods that are easy to apply, eco-friendly, and economical. Among such strategies is the biogenic method, where plants are used as the source of reducing and capping agents. In this review, we intend to debate different strategies of AgNP synthesis. Although, different preparation strategies are in use to synthesize AgNPs such as electron irradiation, optical device ablation, chemical reduction, organic procedures, and photochemical methods. However, biogenic processes are preferably used, as they are environment-friendly and economical. The review covers a comprehensive discussion on the biological activities of AgNPs, such as antimicrobial, anticancer anti-inflammatory, and anti-angiogenic potentials of AgNPs. The use of AgNPs in water treatment and disinfection has also been discussed in detail.

A critical review on the use of potentiometric based biosensors for biomarkers detection

Potentiometric-based biosensors have the potential to advance the detection of several biological compounds and help in early diagnosis of various diseases. They belong to the portable analytical class of biosensors for monitoring biomarkers in the human body. They contain ion-sensitive membranes sensors can be used to determine potassium, sodium, and chloride ions activity while being used as a biomarker to gauge human health. The potentiometric based ion-sensitive membrane systems can be coupled with various techniques to create a sensitive tool for the fast and early detection of cancer biomarkers and other critical biological compounds. This paper discusses the application of potentiometric-based biosensors and classifies them into four major categories: photoelectrochemical potentiometric biomarkers, potentiometric biosensors amplified with molecular imprinted polymer systems, wearable potentiometric biomarkers and light-addressable potentiometric biosensors. This review demonstrated the development of several innovative biosensor-based techniques that could potentially provide reliable tools to test biomarkers. Some challenges however remain, but these can be removed by coupling techniques to maximize the testing sensitivity.

Recent Advances of Molecularly Imprinted Polymers Based on Cyclodextrin

Molecular imprinting polymers (MIPs), generally considered as artificial mimics that are comparable to natural receptor, are polymers with tailor-made specific recognition sites complementary to the template molecules in shape and size. As a class of supramolecular compounds, cyclodextrins (CDs) are flourishing in the field of molecular imprinting with their unique structural properties. This review presents recent advances in application of MIPs based on CDs during the past five years. The discussion is grouped according to the different role of CDs in MIPs, that is, functional monomer, carrier modifier, etc. Main focus is the application of CD-based MIP on sample preparation, detection, and sensing. Additionally, drug delivery with CD-based MIP is also briefly discussed. Finally, challenges and future prospects of application of CDs in MIP are elaborated.

A visible-light-excitable mitochondria-targeted europium complex probe for hypochlorous acid and its application to time-gated luminescence bioimaging

Development of fluorescent/luminescent probes for rapid, selective and sensitive detection of reactive oxygen species (ROS) is of great significance for understanding the roles of ROS in pathophysiological processes. In the present research, a visible-light-excitable Eu³⁺ complex-based probe, Eu(L)₃(DPBT), is designed and synthesized for the time-gated luminescence (TGL) determination of hypochlorous acid (HClO) in vitro and in vivo. The proposed probe exhibits a rapid, selective and sensitive TGL response to HClO, and excellent localization of mitochondria in living cells with low cytotoxicity. These features allow the probe to be used for the TGL sensing and imaging of HClO formation in mimic inflammatory cells at a subcellular level, as well as in endotoxin-induced liver injury and rheumatoid arthritis in live mice. In addition, by immobilizing the probe in the PEG hydrogel, the smart sensor films with rapid response to HClO were prepared, and successfully used for the real-time monitoring of HClO generation in mouse wounds, in order to distinguish the infected wounds from acute ones. Overall, this study provides a useful tool for the clinical monitoring and treatment of wound diseases.

Interaction of LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ upconversion nanoparticles, molecularly imprinted polymers, and templates

In this work, LiYF₄:Yb_0.25³⁺/Er_0.01³⁺/Tm_0.01³⁺/Ho_0.01³⁺@LiYF₄:Yb_0.2³⁺ upconverting nanoparticles (UCNP) were used as luminescent materials for the preparation of molecular imprinting polymer nanocomposites. Three luminescent molecularly imprinted polymer (MIP) nanocomposites were prepared by in situ polymerization. The relationship between the functional monomers, templates, and upconversion nanoparticles was investigated. Two hydrophilic monomers (acrylic acid (AA) and acrylamide (AAm)) and one hydrophobic monomer (N-tert-butylacrylamide (TBAm)) were employed as functional monomers, while one amino acid (cysteine) and two proteins (albumin and hemoglobin) were employed as the templates to investigate the effect of their interaction with LiYF₄:Yb³⁺/Er³⁺/Ho³⁺/Tm³⁺@LiYF₄:Yb³⁺ core/shell UCNPs on the polymerization process, luminescence properties, and adsorption capacity. The results showed that the UCNPs were embedded in the polymeric matrix to form an irregular quasimicrospherical UCNPs@MIP with diameters ranging from several hundred nanometers to several micrometers depending on the functional monomer. The quenching effect was more pronounced for the adsorption of hemoglobin with UCNPs@MIP compared to cysteine and albumin. In addition, the adsorption capacities of the AA- and AAm-made UCNPs@MIP were greater than those of TBAm-made UCNPs@MIP. The rebinding of the templates onto UCNPs@MIP was very fast and approached equilibrium within 30 min, indicating that the synthesized UCNPs@MIP can be employed as fluorescent probes to offer rapid detection of molecules.

In this work, LiYF₄:Yb_0.25³⁺/Er_0.01³⁺/Tm_0.01³⁺/Ho_0.01³⁺@LiYF₄:Yb_0.2³⁺ upconverting nanoparticles (UCNP) were used as luminescent materials for the preparation of molecular imprinting polymer nanocomposites.

Microsphere Polymers in Molecular Imprinting: Current and Future Perspectives

Molecularly imprinted polymers (MIPs) are specific crosslinked polymers that exhibit binding sites for template molecules. MIPs have been developed in various application areas of biology and chemistry; however, MIPs have some problems, including an irregular material shape. In recent years, studies have been conducted to overcome this drawback, with the synthesis of uniform microsphere MIPs or molecularly imprinted microspheres (MIMs). The polymer microsphere is limited to a minimum size of 5 nm and a molecular weight of 10,000 Da. This review describes the methods used to produce MIMs, such as precipitation polymerisation, controlled/'Living' radical precipitation polymerisation (CRPP), Pickering emulsion polymerisation and suspension polymerisation. In addition, some green chemistry aspects and future perspectives will also be given.

How Reliable Is the Electrochemical Readout of MIP Sensors?

Electrochemical methods offer the simple characterization of the synthesis of molecularly imprinted polymers (MIPs) and the readouts of target binding. The binding of electroinactive analytes can be detected indirectly by their modulating effect on the diffusional permeability of a redox marker through thin MIP films. However, this process generates an overall signal, which may include nonspecific interactions with the nonimprinted surface and adsorption at the electrode surface in addition to (specific) binding to the cavities. Redox-active low-molecular-weight targets and metalloproteins enable a more specific direct quantification of their binding to MIPs by measuring the faradaic current. The in situ characterization of enzymes, MIP-based mimics of redox enzymes or enzyme-labeled targets, is based on the indication of an electroactive product. This approach allows the determination of both the activity of the bio(mimetic) catalyst and of the substrate concentration.

Dual-emission CdTe/AgInS2 photoluminescence probe coupled to neural network data processing for the simultaneous determination of folic acid and iron (II)

This work focused on the combination of CdTe and AgInS₂ quantum dots in a dual-emission nanoprobe for the simultaneous determination of folic acid and Fe(II) in pharmaceutical formulations. The surface chemistry of the used QDs was amended with suitable capping ligands to obtain appropriate reactivity in terms of selectivity and sensitivity towards the target analytes. The implementation of PL-based sensing schemes combining multiple QDs of different nature, excited at the same wavelength and emitting at different ones, allowed to obtain a specific analyte-response profile. The first-order fluorescence data obtained from the whole emission spectra of the CdTe/AgInS₂ combined nanoprobe upon interaction with folic acid and Fe(II) were processed by using chemometric tools, namely partial least-squares (PLS) and artificial neural network (ANN). This enabled to circumvent the selectivity issues commonly associated with the use of QDs prone to indiscriminate interaction with multiple species, which impair reliable and accurate quantification in complex matrices samples. ANN demonstrated to be the most efficient chemometric model for the simultaneous determination of both analytes in binary mixtures and pharmaceutical formulations due to the non-linear relationship between analyte concentration and fluorescence data that it could handle. The R²_P and SEP% obtained for both analytes quantification in pharmaceutical formulations through ANN modelling ranged from 0.92 to 0.99 and 5.7-9.1%, respectively. The obtained results revealed that the developed approach is able to quantify, with high reliability and accuracy, more than one analyte in complex mixtures and real samples with pharmaceutical interest.

Molecularly Imprinted Polymers (MIPs) as Theranostic Systems for Sunitinib Controlled Release and Self-Monitoring in Cancer Therapy

Cytotoxic agents that are used conventionally in cancer therapy present limitations that affect their efficacy and safety profile, leading to serious adverse effects. In the aim to overcome these drawbacks, different approaches have been investigated and, among them, theranostics is attracting interest. This new field of medicine combines diagnosis with targeted therapy; therefore, the aim of this study was the preparation and characterization of Molecularly Imprinted Polymers (MIPs) selective for the anticancer drug Sunitinib (SUT) for the development of a novel theranostic system that is able to integrate the drug controlled release ability of MIPs with Rhodamine 6G as a fluorescent marker. MIPs were synthesized by precipitation polymerization and then functionalized with Rhodamine 6G by radical grafting. The obtained polymeric particles were characterized in terms of particles size and distribution, ξ-potential and fluorescent, and hydrophilic properties. Moreover, adsorption isotherms and kinetics and in vitro release properties were also investigated. The obtained binding data confirmed the selective recognition properties of MIP, revealing that SUT adsorption better fitted the Langmuir model, while the adsorption process followed the pseudo-first order kinetic model. Finally, the in vitro release studies highlighted the SUT controlled release behavior of MIP, which was well fitted with the Ritger-Peppas kinetic model. Therefore, the synthesized fluorescent MIP represents a promising material for the development of a theranostic platform for Sunitinib controlled release and self-monitoring in cancer therapy.

A novel molecularly imprinted sensor based on PtCu bimetallic nanoparticle deposited on PSS functionalized graphene with peroxidase-like activity for selective determination of puerarin

In this work, PtCu bimetallic nanoparticle was deposited on poly (styrene sulfonate) (PSS) functionalized graphene (Gr) to form a nanocomposite PtCu/PSS-Gr and its enzyme-like activity was investigated. Benefiting from the synergistic effect from Pt and Cu monometal as well as the superior properties of PSS-Gr, such as large surface area, good dispersity, strong adsorption of substrate and additional peroxidase-like activity, the PtCu/PSS-Gr nanocomposite was demonstrated as an excellent peroxidase mimic to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. Combined with molecularly imprinted polymer (MIP), a new colorimetric approach for puerarin detection was proposed with the linear range of 2 × 10^-5-6 × 10^-4 mol L^-1 and LOD of 1 × 10^-5 mol L^-1. The combination of MIP with PtCu/PSS-Gr nanocomposite not only endowed the determination of puerarin with high selectivity, but also realized the detection of small molecules which are neither substrate of the nanozyme nor substances with strong oxidizing or reducing activity by using peroxidase-like catalytic activity of nanozyme, expanding the application of nanozyme.