Use of decellularized porcine liver for engineering humanized liver organ

Liver tissue engineering using decellularized scaffolds: Current progress, challenges, and opportunities

Liver transplantation represents the only definitive treatment for patients with end-stage liver disease. However, the shortage of liver donors provokes a dramatic gap between available grafts and patients on the waiting list. Whole liver bioengineering, an emerging field of tissue engineering, holds great potential to overcome this gap. This approach involves two main steps; the first is liver decellularization and the second is recellularization. Liver decellularization aims to remove cellular and nuclear materials from the organ, leaving behind extracellular matrices containing different structural proteins and growth factors while retaining both the vascular and biliary networks. Recellularization involves repopulating the decellularized liver with appropriate cells, theoretically from the recipient patient, to reconstruct the parenchyma, vascular tree, and biliary network. The aim of this review is to identify the major advances in decellularization and recellularization strategies and investigate obstacles for the clinical application of bioengineered liver, including immunogenicity of the designed liver extracellular matrices, the need for standardization of scaffold fabrication techniques, selection of suitable cell sources for parenchymal repopulation, vascular, and biliary tree reconstruction. In vivo transplantation models are also summarized for evaluating the functionality of bioengineered livers. Finally, the regulatory measures and future directions for confirming the safety and efficacy of bioengineered liver are also discussed. Addressing these challenges in whole liver bioengineering may offer new solutions to meet the demand for liver transplantation and improve patient outcomes.

Comparison of Glioblastoma Cell Culture Platforms Based on Transcriptional Similarity with Paired Tissue

No standardized in vitro cell culture models for glioblastoma (GBM) have yet been established, excluding the traditional two-dimensional culture. GBM tumorspheres (TSs) have been highlighted as a good model platform for testing drug effects and characterizing specific features of GBM, but a detailed evaluation of their suitability and comparative performance is lacking. Here, we isolated GBM TSs and extracellular matrices (ECM) from tissues obtained from newly diagnosed IDH1 wild-type GBM patients and cultured GBM TSs on five different culture platforms: (1) ordinary TS culture liquid media (LM), (2) collagen-based three-dimensional (3D) matrix, (3) patient typical ECM-based 3D matrix, (4) patient tumor ECM-based 3D matrix, and (5) mouse brain. For evaluation, we obtained transcriptome data from all cultured GBM TSs using microarrays. The LM platform exhibited the most similar transcriptional program to paired tissues based on GBM genes, stemness- and invasiveness-related genes, transcription factor activity, and canonical signaling pathways. GBM TSs can be cultured via an easy-to-handle and cost- and time-efficient LM platform while preserving the transcriptional program of the originating tissues without supplementing the ECM or embedding it into the mouse brain. In addition to applications in basic cancer research, GBM TSs cultured in LM may also serve as patient avatars in drug screening and pre-clinical evaluation of targeted therapy and as standardized and clinically relevant models for precision medicine.

Vascular reconstruction of the decellularized biomatrix for whole-organ engineering-a critical perspective and future strategies

Whole-organ re-engineering is the most challenging goal yet to be achieved in tissue engineering and regenerative medicine. One essential factor in any transplantable and functional tissue engineering is fabricating a perfusable vascular network with macro- and micro-sized blood vessels. Whole-organ development has become more practical with the use of the decellularized organ biomatrix (DOB) as it provides a native biochemical and structural framework for a particular organ. However, reconstructing vasculature and re-endothelialization in the DOB is a highly challenging task and has not been achieved for constructing a clinically transplantable vascularized organ with an efficient perfusable capability. Here, we critically and articulately emphasized factors that have been studied for the vascular reconstruction in the DOB. Furthermore, we highlighted the factors used for vasculature development studies in general and their application in whole-organ vascular reconstruction. We also analyzed in detail the strategies explored so far for vascular reconstruction and angiogenesis in the DOB for functional and perfusable vasculature development. Finally, we discussed some of the crucial factors that have been largely ignored in the vascular reconstruction of the DOB and the future directions that should be addressed systematically.

Manufacturing and Functional Characterization of Bioengineered Liver Grafts for Extracorporeal Liver Assistance in Acute Liver Failure

Acute Liver Failure (ALF) is a life-threatening illness characterized by the rapid onset of abnormal liver biochemistries, coagulopathy, and the development of hepatic encephalopathy. Extracorporeal bioengineered liver (BEL) grafts could offer a bridge therapy to transplant or recovery. The present study describes the manufacture of clinical scale BELs created from decellularized porcine-derived liver extracellular matrix seeded entirely with human cells: human umbilical vein endothelial cells (HUVECs) and primary human liver cells (PHLCs). Decellularized scaffolds seeded entirely with human cells were shown to adhere to stringent sterility and safety guidelines and demonstrated increased functionality when compared to grafts seeded with primary porcine liver cells (PPLCs). BELs with PHLCs were able to clear more ammonia than PPLCs and demonstrated lower perfusion pressures during patency testing. Additionally, to determine the full therapeutic potential of BELs seeded with PHLCs, longer culture periods were assessed to address the logistical constraints associated with manufacturing and transporting a product to a patient. The fully humanized BELs were able to retain their function after cold storage simulating a product transport period. Therefore, this study demonstrates the manufacture of bioengineered liver grafts and their potential in the clinical setting as a treatment for ALF.

Whole Liver Derived Acellular Extracellular Matrix for Bioengineering of Liver Constructs: An Updated Review

Biomaterial templates play a critical role in establishing and bioinstructing three-dimensional cellular growth, proliferation and spatial morphogenetic processes that culminate in the development of physiologically relevant in vitro liver models. Various natural and synthetic polymeric biomaterials are currently available to construct biomimetic cell culture environments to investigate hepatic cell-matrix interactions, drug response assessment, toxicity, and disease mechanisms. One specific class of natural biomaterials consists of the decellularized liver extracellular matrix (dECM) derived from xenogeneic or allogeneic sources, which is rich in bioconstituents essential for the ultrastructural stability, function, repair, and regeneration of tissues/organs. Considering the significance of the key design blueprints of organ-specific acellular substrates for physiologically active graft reconstruction, herein we showcased the latest updates in the field of liver decellularization-recellularization technologies. Overall, this review highlights the potential of acellular matrix as a promising biomaterial in light of recent advances in the preparation of liver-specific whole organ scaffolds. The review concludes with a discussion of the challenges and future prospects of liver-specific decellularized materials in the direction of translational research.

Decellularized Extracellular Matrix for Remodeling Bioengineering Organoid's Microenvironment

Over the past decade, stem cell- and tumor-derived organoids are the most promising models in developmental biology and disease modeling, respectively. The matrix is one of three main elements in the construction of an organoid and the most important module of its extracellular microenvironment. However, the source of the currently available commercial matrix, Matrigel, limits the application of organoids in clinical medicine. It is worth investigating whether the original decellularized extracellular matrix (dECM) can be exploited as the matrix of organoids and improving organoid construction are very important. In this review, tissue decellularization protocols and the characteristics of decellularization methods, the mechanical support and biological cues of extraccellular matrix (ECM), methods for construction of multifunctional dECM and responsive dECM hydrogel, and the potential applications of functional dECM are summarized. In addition, some expectations are provided for dECM as the matrix of organoids in clinical applications.

Bioengineering liver tissue by repopulation of decellularised scaffolds

Liver transplantation is the only curative therapy for end stage liver disease, but is limited by the organ shortage, and is associated with the adverse consequences of immunosuppression. Repopulation of decellularised whole organ scaffolds with appropriate cells of recipient origin offers a theoretically attractive solution, allowing reliable and timely organ sourcing without the need for immunosuppression. Decellularisation methodologies vary widely but seek to address the conflicting objectives of removing the cellular component of tissues whilst keeping the 3D structure of the extra-cellular matrix intact, as well as retaining the instructive cell fate determining biochemicals contained therein. Liver scaffold recellularisation has progressed from small rodent in vitro studies to large animal in vivo perfusion models, using a wide range of cell types including primary cells, cell lines, foetal stem cells, and induced pluripotent stem cells. Within these models, a limited but measurable degree of physiologically significant hepatocyte function has been reported with demonstrable ammonia metabolism in vivo. Biliary repopulation and function have been restricted by challenges relating to the culture and propagations of cholangiocytes, though advances in organoid culture may help address this. Hepatic vasculature repopulation has enabled sustainable blood perfusion in vivo, but with cell types that would limit clinical applications, and which have not been shown to have the specific functions of liver sinusoidal endothelial cells. Minority cell groups such as Kupffer cells and stellate cells have not been repopulated. Bioengineering by repopulation of decellularised scaffolds has significantly progressed, but there remain significant experimental challenges to be addressed before therapeutic applications may be envisaged.

Advances in Recellularization of Decellularized Liver Grafts with Different Liver (Stem) Cells: Towards Clinical Applications

Liver transplantation is currently the only curative therapy for patients with acute or chronic liver failure. However, a dramatic gap between the number of available liver grafts and the number of patients on the transplantation waiting list emphasizes the need for valid liver substitutes. Whole-organ engineering is an emerging field of tissue engineering and regenerative medicine. It aims to generate transplantable and functional organs to support patients on transplantation waiting lists until a graft becomes available. It comprises two base technologies developed in the last decade; (1) organ decellularization to generate a three-dimensional (3D) extracellular matrix scaffold of an organ, and (2) scaffold recellularization to repopulate both the parenchymal and vascular compartments of a decellularized organ. In this review article, recent advancements in both technologies, in relation to liver whole-organ engineering, are presented. We address the potential sources of hepatocytes and non-parenchymal liver cells for repopulation studies, and the role of stem-cell-derived liver progeny is discussed. In addition, different cell seeding strategies, possible graft modifications, and methods used to evaluate the functionality of recellularized liver grafts are outlined. Based on the knowledge gathered from recent transplantation studies, future directions are summarized.

Analysis of decellularized mouse liver fragment and its recellularization with human endometrial mesenchymal cells as a candidate for clinical usage

Decellularized tissue has been used as a natural extracellular matrix (ECM) or bioactive biomaterial for tissue engineering. The present study aims to compare and analyze different decellularization protocols for mouse liver fragments and cell seeding and attachment in the created scaffold using human endometrial mesenchymal cells (hEMCs).After collecting and dissecting the mouse liver into small fragments, they were decellularized by Triton X-100 and six concentrations of sodium dodecyl sulfate (SDS; 0.025, 0.05, 0.1, 0.25, 0.5, and 1%) at different exposure times. The morphology and DNA content of decellularized tissues were studied, and the group with better morphology and lower DNA content was selected for additional assessments. Masson's tri-chrome and periodic acid Schiff staining were performed to evaluate ECM materials. Raman confocal spectroscopy analysis was used to quantify the amount of collagen type I, III and IV, glycosaminoglycans and elastin. Scanning electron microscopy and MTT assay were applied to assess the ultrastructure and porosity and cytotoxicity of decellularized scaffolds, respectively. In the final step, hEMCs were seeded on the decellularized scaffold and cultured for one week, and finally the cell attachment and homing were studied morphologically.The treated group with 0.1% SDS for 24 h showed a well preserved ECM morphology similar to native control and showing the minimum level of DNA. Raman spectroscopy results demonstrated that the amount of collagen type I and IV was not significantly changed in this group compared to the control, but a significant reduction in collagen III and elastin protein levels was seen (P < 0.001). The micrographs showed a porous ECM in decellularized sample similar to the native control with the range of 2.25 µm to 7.86 µm. After cell seeding, the infiltration and migration of cells in different areas of the scaffold were seen. In conclusion, this combined protocol for mouse liver decellularization is effective and its recellularization with hEMCs could be suitable for clinical applications in the future.

Normothermic liver machine perfusion as a dynamic platform for regenerative purposes: What does the future have in store for us?

Liver transplantation has become an immense success; nevertheless, far more recipients are registered on waiting lists than there are available donor livers for transplantation. High-risk, extended criteria donor livers are increasingly used to reduce the discrepancy between organ demand and supply. Especially for high-risk livers, dynamic preservation using machine perfusion can decrease post-transplantation complications and may increase donor liver utilisation by improving graft quality and enabling viability testing before transplantation. To further increase the availability of donor livers suitable for transplantation, new strategies are required that make it possible to use organs that are initially too damaged to be transplanted. With the current progress in experimental liver transplantation research, (long-term) normothermic machine perfusion may be used in the future as a dynamic platform for regenerative medicine approaches, enabling repair and regeneration of injured donor livers. Currently explored therapeutics such as defatting cocktails, RNA interference, senolytics, and stem cell therapy may assist in the repair and/or regeneration of injured livers before transplantation. This review will provide a forecast of the future utility of normothermic machine perfusion in decreasing the imbalance between donor liver demand and supply by enabling the repair and regeneration of damaged donor livers.

High level of polarized engraftment of porcine intrahepatic cholangiocyte organoids in decellularized liver scaffolds

In Europe alone, each year 5500 people require a life-saving liver transplantation, but 18% die before receiving one due to the shortage of donor organs. Whole organ engineering, utilizing decellularized liver scaffolds repopulated with autologous cells, is an attractive alternative to increase the pool of available organs for transplantation. The development of this technology is hampered by a lack of a suitable large-animal model representative of the human physiology and a reliable and continuous cell source. We have generated porcine intrahepatic cholangiocyte organoids from adult stem cells and demonstrate that these cultures remained stable over multiple passages whilst retaining the ability to differentiate into hepatocyte- and cholangiocyte-like cells. Recellularization onto porcine scaffolds was efficient and the organoids homogeneously differentiated, even showing polarization. Our porcine intrahepatic cholangiocyte system, combined with porcine liver scaffold paves the way for developing whole liver engineering in a relevant large-animal model.

Design by Nature: Emerging Applications of Native Liver Extracellular Matrix for Cholangiocyte Organoid-Based Regenerative Medicine

Organoid technology holds great promise for regenerative medicine. Recent studies show feasibility for bile duct tissue repair in humans by successfully transplanting cholangiocyte organoids in liver grafts during perfusion. Large-scale expansion of cholangiocytes is essential for extending these regenerative medicine applications. Human cholangiocyte organoids have a high and stable proliferation capacity, making them an attractive source of cholangiocytes. Commercially available basement membrane extract (BME) is used to expand the organoids. BME allows the cells to self-organize into 3D structures and stimulates cell proliferation. However, the use of BME is limiting the clinical applications of the organoids. There is a need for alternative tissue-specific and clinically relevant culture substrates capable of supporting organoid proliferation. Hydrogels prepared from decellularized and solubilized native livers are an attractive alternative for BME. These hydrogels can be used for the culture and expansion of cholangiocyte organoids in a clinically relevant manner. Moreover, the liver-derived hydrogels retain tissue-specific aspects of the extracellular microenvironment. They are composed of a complex mixture of bioactive and biodegradable extracellular matrix (ECM) components and can support the growth of various hepatobiliary cells. In this review, we provide an overview of the clinical potential of native liver ECM-based hydrogels for applications with human cholangiocyte organoids. We discuss the current limitations of BME for the clinical applications of organoids and how native ECM hydrogels can potentially overcome these problems in an effort to unlock the full regenerative clinical potential of the organoids.

A new strategy for the decellularization of whole organs by hydrostatic pressure

Tissue engineering has been able to develop novel decellularization-recellularization techniques, which facilitates the research for the generation of functional organs. This is based in the initial obtention of the organ's extracellular matrix (ECM). Therefore, any improvement in the decellularization process would have a positive impact in the results of the recellularization process. Nevertheless, commonly the methods and equipment employed for this process are expensive and thus limit the access of this technique to various research groups globally.

AIM

To develop a decellularization technique with the exclusive use of hydrostatic pressure of detergent solutions, to have an easily accessible and low-cost technique that meets the basic requirements of acellularity and functionality of the ECM.

METHODS

This experimental study was performed in 10 male Wistar rats, obtaining the liver to carry out serial washes, with 1, 2 and 3% Triton X-100 solutions and 0.1% SDS. The washes were performed by using a Gravity Perfusion System (GPS), which assured us a continuous hydrostatic pressure of 7.5 mmHg. The obtained ECM was processed using stains and immunostaining to determine the residual cell content and preservation of its components.

RESULTS

The staining showed a removal of cellular and nuclear components of approximately 97% of the acellular ECM, with an adequate three-dimensional pattern of collagen and proteoglycans. Furthermore, the acellular ECM allowed the viability of a primary hepatocyte culture.

CONCLUSIONS

The use of the GPS decellularization technique allowed us to obtain an acellular and functional ECM, drastically reducing experimentation costs. This article is protected by copyright. All rights reserved.

Optimizing the Decellularized Porcine Liver Scaffold Protocol

There are few existing methods for shortening the decellularization period for a human-sized whole-liver scaffold. Here, we describe a protocol that enables effective decellularization of the liver obtained from pigs weigh 120 ± 4.2 kg within 72 h. Porcine livers (approx. 1.5 kg) were decellularized for 3 days using a combination of chemical and enzymatic decellularization agents. After trypsin, sodium deoxycholate, and Triton X-100 perfusion, the porcine livers were completely translucent. Our protocol was efficient to promote cell removal, the preservation of extracellular matrix (ECM) components, and vascular tree integrity. In conclusion, our protocol is efficient to promote human-sized whole-liver scaffold decellularization and thus useful to generate bioengineered livers to overcome the shortage of organs.

Challenges and recent trends with the development of hydrogel fiber for biomedical applications

Hydrogel is the most emblematic soft material which possesses significantly tunable and programmable characteristics. Polymer hydrogels possess significant advantages including, biocompatible, simple, reliable and low cost. Therefore, research on the development of hydrogel for biomedical applications has been grown intensely. However, hydrogel development is challenging and required significant effort before the application at an industrial scale. Therefore, the current work focused on evaluating recent trends and issues with hydrogel development for biomedical applications. In addition, the hydrogel's development methodology, physicochemical properties, and biomedical applications are evaluated and benchmarked against the reported literature. Later, biomedical applications of the nano-cellulose-based hydrogel are considered and critically discussed. Based on a detailed review, it has been found that the surface energy, intermolecular interactions, and interactions of hydrogel adhesion forces are major challenges that contribute to the development of hydrogel. In addition, compared to other hydrogels, nanocellulose hydrogels demonstrated higher potential for drug delivery, 3D cell culture, diagnostics, tissue engineering, tissue therapies and gene therapies. Overall, nanocellulose hydrogel has the potential for commercialization for different biomedical applications.

Preconditioning process for dermal tissue decellularization using electroporation with sonication

Decellularization to produce bioscaffolds composed of the extracellular matrix (ECM) uses enzymatic, chemical and physical methods to remove antigens and cellular components from tissues. Effective decellularization methods depend on the characteristics of tissues, and in particular, tissues with dense, complex structure and abundant lipid content are difficult to completely decellularize. Our study enables future research on the development of methods and treatments for fabricating bioscaffolds via decellularization of complex and rigid skin tissues, which are not commonly considered for decellularization to date as their structural and functional characteristics could not be preserved after severe decellularization. In this study, decellularization of human dermal tissue was done by a combination of both chemical (0.05% trypsin-EDTA, 2% SDS and 1% Triton X-100) and physical methods (electroporation and sonication). After decellularization, the content of DNA remaining in the tissue was quantitatively confirmed, and the structural change of the tissue and the retention and distribution of ECM components were evaluated through histological and histochemical analysis, respectively. Conditions of the chemical pretreatment that increase the efficiency of physical stimulation as well as decellularization, and conditions for electroporation and sonication without the use of detergents, unlike the methods performed in previous studies, were established to enable the complete decellularization of the skin tissue. The combinatorial decellularization treatment formed micropores in the lipid bilayers of the skin tissues while removing all cell and cellular residues without affecting the ECM properties. Therefore, this procedure can be widely used to fabricate bioscaffolds by decellularizing biological tissues with dense and complex structures.

Uterine Tissue Engineering: Where We Stand and the Challenges Ahead

Tissue engineering is an innovative approach to develop allogeneic tissues and organs. The uterus is a very sensitive and complex organ, which requires refined techniques to properly regenerate and even, to rebuild itself. Many therapies were developed in 20th century to solve reproductive issues related to uterus failure and, more recently, tissue engineering techniques provided a significant evolution in this issue. Herein we aim to provide a broad overview and highlights of the general concepts involved in bioengineering to reconstruct the uterus and its tissues, focusing on strategies for tissue repair, production of uterine scaffolds, biomaterials and reproductive animal models, highlighting the most recent and effective tissue engineering protocols in literature and their application in regenerative medicine. In addition, we provide a discussion about what was achieved in uterine tissue engineering, the main limitations, the challenges to overcome and future perspectives in this research field.

Recent advances in optimization of liver decellularization procedures used for liver regeneration

Severe liver diseases have been considered the most common causes of adult deaths worldwide. Until now, liver transplantation is known as the only effective treatment for end stage liver disease. However, it is associated with several problems, most importantly, the side effects of immunosuppressive drugs that should be used after transplantation, and the shortage of tissue donors compared to the increasing number of patients requiring liver transplantation. Currently, tissue/organ decellularization as a new approach in tissue engineering is becoming a valid substitute for managing these kinds of problems. Decellularization of a whole liver is an attractive procedure to create three-dimensional (3D) scaffolds that micro-architecturally and structurally are similar to the native one and could support the repair or replacement of damaged or injured tissue. In this review, the different methods used for decellularization of liver tissue have been reviewed. In addition, the current approaches to overcome the challenges in these techniques are discussed.

Cell Therapy and Bioengineering in Experimental Liver Regenerative Medicine: In Vivo Injury Models and Grafting Strategies

Purpose of Review

To describe experimental liver injury models used in regenerative medicine, cell therapy strategies to repopulate damaged livers and the efficacy of liver bioengineering.

Recent Findings

Several animal models have been developed to study different liver conditions. Multiple strategies and modified protocols of cell delivery have been also reported. Furthermore, using bioengineered liver scaffolds has shown promising results that could help in generating a highly functional cell delivery system and/or a whole transplantable liver.

Summary

To optimize the most effective strategies for liver cell therapy, further studies are required to compare among the performed strategies in the literature and/or innovate a novel modifying technique to overcome the potential limitations. Coating of cells with polymers, decellularized scaffolds, or microbeads could be the most appropriate solution to improve cellular efficacy. Besides, overcoming the problems of liver bioengineering may offer a radical treatment for end-stage liver diseases.

Decellularized xenogeneic scaffolds in transplantation and tissue engineering: Immunogenicity versus positive cell stimulation

Seriously compromised function of some organs can only be restored by transplantation. Due to the shortage of human donors, the need to find another source of organs is of primary importance. Decellularized scaffolds of non-human origin are being studied as highly potential biomaterials for tissue engineering. Their biological nature and thus the ability to provide a naturally-derived environment for human cells to adhere and grow highlights their great advantage in comparison to synthetic scaffolds. Nevertheless, since every biomaterial implanted in the body generates immune reaction, studying the interaction of the scaffold with the surrounding tissues is necessary. This review aims to summarize current knowledge on the immunogenicity of semi-xenografts involved in transplantation. Moreover, positive aspects of the interaction between xenogeneic scaffold and human cells are discussed, focusing on specific roles of proteins associated with extracellular matrix in cell adhesion and signalling.

Liver bioengineering: Recent trends/advances in decellularization and cell sheet technologies towards translation into the clinic

Development of novel technologies provides the best tissue constructs engineering and maximizes their therapeutic effects in regenerative therapy, especially for liver dysfunctions. Among the currently investigated approaches of tissue engineering, scaffold-based and scaffold-free tissues are widely suggested for liver regeneration. Analogs of liver acellular extracellular matrix (ECM) are utilized in native scaffolds to increase the self-repair and healing ability of organs. Native ECM analog could improve liver repairing through providing the supportive framework for cells and signaling molecules, exerting normal biomechanical, biochemical, and physiological signal complexes. Recently, innovative cell sheet technology is introduced as an alternative for conventional tissue engineering with the advantage of fewer scaffold restrictions and cell culture on a Thermo-Responsive Polymer Surface. These sheets release the layered cells through a temperature-controlled procedure without enzymatic digestion, while preserving the cell-ECM contacts and adhesive molecules on cell-cell junctions. In addition, several novelties have been introduced into the cell sheet and decellularization technologies to aid cell growth, instruct differentiation/angiogenesis, and promote cell migration. In this review, recent trends, advancements, and issues linked to translation into clinical practice are dissected and compared regarding the decellularization and cell sheet technologies for liver tissue engineering.

Characterization of rat liver bud-derived cells

Cells derived from the fetal liver have been shown to be a rich source of progenitor stem cells, constituting a promising source for Tissue Engineering and Regenerative Medicine. In this study, embryo and fetal liver-bud derived cells from Fischer 344 rats were obtained at E12.5, E14.5 and E16.5 gestational days and evaluated for cell phenotype, survival and proliferation. Liver transaminase (AST and ALT) and AFP levels were lower in embryo liver-bud-derived cells on day 12.5. Markers for stem cells, cell cycle progression and cell death were differentially expressed in E12.5 cell cultures. Analysis of mitochondrial electric potential on 14.5 and 16.5 days showed a tendency for cells with lower functional or metabolic ability, in comparison to cultures derived from day 12.5. The results demonstrated that the majority of the E16.5 cells were in the G0 / G1 phase. The capacity of synthesis (S) and cellular division (G2 / M) of embryo and fetal liver bud-derived cells was constant over all gestational periods. In conclusion, embryo and fetal liver-bud-derived cells during the periods of 12.5 and 14.5 days, showed expression profile of progenitor cells, cell activity and hematopoietic function in culture.

Biointerface Materials for Cellular Adhesion: Recent Progress and Future Prospects

While many natural instances of adhesion between cells and biological macromolecules have been elucidated, understanding how to mimic these adhesion events remains to be a challenge. Discovering new biointerface materials that can provide an appropriate environment, and in some cases, also providing function similar to the body’s own extracellular matrix, would be highly beneficial to multiple existing applications in biomedical and biological engineering, and provide the necessary insight for the advancement of new technology. Such examples of current applications that would benefit include biosensors, high-throughput screening and tissue engineering. From a mechanical perspective, these biointerfaces would function as bioactuators that apply focal adhesion points onto cells, allowing them to move and migrate along a surface, making biointerfaces a very relevant application in the field of actuators. While it is evident that great strides in progress have been made in the area of synthetic biointerfaces, we must also acknowledge their current limitations as described in the literature, leading to an inability to completely function and dynamically respond like natural biointerfaces. In this review, we discuss the methods, materials and, possible applications of biointerface materials used in the current literature, and the trends for future research in this area.

Syndecan-4 promotes vascular beds formation in tissue engineered liver via thrombospondin 1

Instantaneous blood coagulation after bioengineered liver transplantation is a major issue, and the key process in its prevention is the construction of the endothelial vascular bed on biomimetic scaffolds. However, the specific molecules involved in the regulation of the vascular bed formation remain unclear. Syndecan-4 is a type I transmembrane glycoprotein commonly expressed in the human body; its receptor has been reported as critical for optimal cell adhesion and initiation of intracellular signaling, indicating its promising application in vascular bed formation. In the current study, bioinformatics analysis and in vitro experiments were performed to evaluate whether syndecan-4 promoted endothelial cell migration and functional activation. Exogenous syndecan-4-overexpressing endothelial cells were perfused into the decellularized liver scaffold, which was assessed by Masson’s trichrome staining. Western blotting and qRT-PCR were used to evaluate the effects of syndecan-4 on the thrombospondin 1 (THBS1) stability. We found that syndecan-4 promoted the adhesion of vascular endothelial cells and facilitated cell migration and angiogenesis. Furthermore, syndecan-4 overexpression resulted in a well-aligned endothelium on the decellularized liver scaffolds. Mechanistically, syndecan-4 destabilized THBS1 at the protein level. Therefore, our data revealed that syndecan-4 promoted the biological activity of endothelial cells on the bionic liver vascular bed through THBS1. These findings provide scientific evidences for solving transient blood coagulation after bionic liver transplantation.

Regenerative hepatology: In the quest for a modern prometheus?

As liver-related morbidity and mortality is rising worldwide and orthotopic liver transplantation (OLT) remains the only standard-of-care for end-stage liver disease or acute liver failure, shortage of donor organs is becoming more prominent. Importantly, advances in regenerative Hepatology and liver bioengineering are bringing new hope to the possibility of restoring impaired hepatic functionality in the presence of acute or chronic liver failure. Hepatocyte transplantation and artificial liver-support systems were the first strategies used in regenerative hepatology but have presented various types of efficiency limitations restricting their widespread use. In parallel, liver bioengineering has been a rapidly developing field bringing continuously novel advancements in biomaterials, three dimensional (3D) scaffolds, cell sources and relative methodologies for creating bioengineered liver tissue. The current major task in liver bioengineering is to build small implantable liver mass for treating inherited metabolic disorders, bioengineered bile ducts for congenital biliary defects and large bioengineered liver organs for transplantation, as substitutes to donor-organs, in cases of acute or acute-on-chronic liver failure. This review aims to summarize the state-of-the-art and upcoming technologies of regenerative Hepatology that are emerging as promising alternatives to the current standard-of care in liver disease.

Portal venous repopulation of decellularised rat liver scaffolds with syngeneic bone marrow stem cells

Liver transplantation is the only life-saving treatment for end-stage liver failure but is limited by the organ shortage and consequences of immunosuppression. Repopulation of decellularised scaffolds with recipient cells provides a theoretical solution, allowing reliable and timely organ sourcing without the need for immunosuppression. Recellularisation of the vasculature of decellularised liver scaffolds was investigated as an essential prerequisite to the survival of other parenchymal components. Liver decellularisation was carried out by portal vein perfusion using a detergent-based solution. Decellularised scaffolds were placed in a sterile perfusion apparatus consisting of a sealed organ chamber, functioning at 37°C in normal atmospheric conditions. The scaffold was perfused via portal vein with culture medium. A total of 10⁷ primary cultured bone marrow stem cells, selected by plastic adherence, were infused into the scaffold, after which repopulated scaffolds were perfused for up to 30 days. The cultured stem cells were assessed for key marker expression using fluorescence-activated cell sorting (FACS), and recellularised scaffolds were analysed by light, electron and immunofluorescence microscopy. Stem cells were engrafted in portal, sinusoidal and hepatic vein compartments, with cell alignment reminiscent of endothelium. Cell surface marker expression altered following engraftment, from haematopoietic to endothelial phenotype, and engrafted cells expressed sinusoidal endothelial endocytic receptors (mannose, Fc and stabilin receptors). These results represent one step towards complete recellularisation of the liver vasculature and progress towards the objective of generating transplantable neo-organs.

Extracellular Matrix-Based Biomaterials and Their Influence Upon Cell Behavior

Biologic scaffold materials composed of allogeneic or xenogeneic extracellular matrix (ECM) are commonly used for the repair and remodeling of injured tissue. The clinical outcomes associated with implantation of ECM-based materials range from unacceptable to excellent. The variable clinical results are largely due to differences in the preparation of the material, including characteristics of the source tissue, the method and efficacy of decellularization, and post-decellularization processing steps. The mechanisms by which ECM scaffolds promote constructive tissue remodeling include mechanical support, degradation and release of bioactive molecules, recruitment and differentiation of endogenous stem/progenitor cells, and modulation of the immune response toward an anti-inflammatory phenotype. The methods of ECM preparation and the impact of these methods on the quality of the final product are described herein. Examples of favorable cellular responses of immune and stem cells associated with constructive tissue remodeling of ECM bioscaffolds are described.

Conjugating homogenized liver-extracellular matrix into decellularized hepatic scaffold for liver tissue engineering

The generation of a transplantable liver scaffold is crucial for the treatment of end-stage liver failure. Unfortunately, decellularized liver scaffolds suffer from lack of bioactive molecules and functionality. In this study, we conjugated homogenized liver-extracellular matrix (ECM) into a decellularized liver in a rat model to improve its structural and functional properties. The homogenized ECM was prepared, characterized, and subsequently perfused into ethyl carbodiimide hydrochloride (EDC)/N-hydroxysuccinimide (NHS) activated liver scaffolds. Various techniques were performed to confirm the improvements that were accomplished through the conjugation process; these included micro/ultra-structural analyses, biochemical analysis of ECM components, DNA quantification, swelling ratio, structural stability, calcification properties, platelet activation study, static and dynamic seeding with EAhy926 endothelial cells and HepG2 hepatocarcinoma cells, subcutaneous implantation and intrahepatic transplantation. The results showed that the conjugated scaffolds have superior micro- and ultrastructural and biochemical characteristics. In addition, DNA contents, swelling ratios, calcification properties, platelet reactions, and host inflammatory reactions were not altered with the conjugation process. The conjugated scaffolds revealed better cellular spreading and popularity compared to the non-conjugated scaffolds. Intrahepatic transplantation showed that the conjugated scaffold had higher popularity of hepatic regenerative cells with better angiogenesis. The conjugation of the decellularized liver scaffold with homogenized liver-ECM is a promising tool to improve the quality of the generated scaffold for further transplantation.

Novel alternative transplantation therapy for orthotopic liver transplantation in liver failure: A systematic review

BACKGROUND

Orthotopic liver transplantation (OLT) is the only treatment for end-stage liver failure; however, graft shortage impedes its applicability. Therefore, studies investigating alternative therapies are plenty. Nevertheless, no study has comprehensively analyzed these therapies from different perspectives.

AIM

To summarize the current status of alternative transplantation therapies for OLT and to support future research.

METHODS

A systematic literature search was performed using PubMed, Cochrane Library and EMBASE for articles published between January 2010 and 2018, using the following MeSH terms: [(liver transplantation) AND cell] OR [(liver transplantation) AND differentiation] OR [(liver transplantation) AND organoid] OR [(liver transplantation) AND xenotransplantation]. Various types of studies describing therapies to replace OLT were retrieved for full-text evaluation. Among them, we selected articles including in vivo transplantation.

RESULTS

A total of 89 studies were selected. There are three principle forms of treatment for liver failure: Xeno-organ transplantation, scaffold-based transplantation, and cell transplantation. Xeno-organ transplantation was covered in 14 articles, scaffold-based transplantation was discussed in 22 articles, and cell transplantation was discussed in 53 articles. Various types of alternative therapies were discussed: Organ liver, 25 articles; adult hepatocytes, 31 articles; fetal hepatocytes, three articles; mesenchymal stem cells (MSCs), 25 articles; embryonic stem cells, one article; and induced pluripotent stem cells, three articles and other sources. Clinical applications were discussed in 12 studies: Cell transplantation using hepatocytes in four studies, five studies using umbilical cord-derived MSCs, three studies using bone marrow-derived MSCs, and two studies using hematopoietic stem cells.

CONCLUSION

The clinical applications are present only for cell transplantation. Scaffold-based transplantation is a comprehensive treatment combining organ and cell transplantations, which warrants future research to find relevant clinical applications.

Tissue Engineering in Liver Regenerative Medicine: Insights into Novel Translational Technologies

Organ and tissue shortage are known as a crucially important public health problem as unfortunately a small percentage of patients receive transplants. In the context of emerging regenerative medicine, researchers are trying to regenerate and replace different organs and tissues such as the liver, heart, skin, and kidney. Liver tissue engineering (TE) enables us to reproduce and restore liver functions, fully or partially, which could be used in the treatment of acute or chronic liver disorders and/or generate an appropriate functional organ which can be transplanted or employed as an extracorporeal device. In this regard, a variety of techniques (e.g., fabrication technologies, cell-based technologies, microfluidic systems and, extracorporeal liver devices) could be applied in tissue engineering in liver regenerative medicine. Common TE techniques are based on allocating stem cell-derived hepatocyte-like cells or primary hepatocytes within a three-dimensional structure which leads to the improvement of their survival rate and functional phenotype. Taken together, new findings indicated that developing liver tissue engineering-based techniques could pave the way for better treatment of liver-related disorders. Herein, we summarized novel technologies used in liver regenerative medicine and their future applications in clinical settings.

A Survival Model of In Vivo Partial Liver Lobe Decellularization Towards In Vivo Liver Engineering

In vivo liver decellularization has become a promising strategy to study in vivo liver engineering. However, long-term survival after in vivo liver decellularization has not yet been achieved due to anatomical and technical challenges. This study aimed at establishing a survival model of in vivo partial liver lobe perfusion-decellularization in rats. We compared three decellularization protocols (1% Triton X100 followed by 1% sodium dodecyl sulfate [SDS], 1% SDS vs. 1% Triton X100, n = 6/group). Using the optimal one as judged by macroscopy, histology and DNA content, we characterized the structural integrity and matrix proteins by using histology, scanning electron microscopy, computed tomography scanning, and immunohistochemistry (IHC). We prevented contamination of the abdominal cavity with the corrosive detergents by using polyvinylidene chloride (PVDC) film + dry gauze in comparison to PVDC film + dry gauze + aspiration tube (n = 6/group). Physiological reperfusion was assessed by histology. Survival rate was determined after a 7-day observation period. Only perfusion with 1% SDS resulted in an acellular scaffold (fully translucent without histologically detectable tissue remnants, DNA concentration is <2% of that in native lobe) with remarkable structural and ultrastructural integrity as well as preservation of main matrix proteins (IHC positive for collagen IV, laminin, and elastin). Contamination of abdominal organs with the potentially toxic SDS solution was achieved by placing a suction tube in addition to the PVDC film + dry gauze and allowed a 7-day survival of all animals without severe postoperative complications. On reperfusion, the liver turned red within seconds without any leakage from the surface of the liver. About 12 h after reperfusion, not only blood cells but also some clots were visible in the portal vein, sinusoidal matrix network, and central vein, suggesting physiological perfusion. In conclusion, our results of this study show the first available data on generation of a survival model of in vivo parenchymal organ decellularization, creating a critical step toward in vivo organ engineering. Impact Statement Recently, in vivo liver decellularization has been considered a promising approach to study in vivo liver repopulation of a scaffold compared with ex vivo liver repopulation. However, long-term survival of in vivo liver decellularization has not yet been achieved. Here, despite anatomical and technical challenges, we successfully created a survival model of in vivo selected liver lobe decellularization in rats, providing a major step toward in vivo organ engineering.

A Hepatic Scaffold from Decellularized Liver Tissue: Food for Thought

Allogeneic liver transplantation is still deemed the gold standard solution for end-stage organ failure; however, donor organ shortages have led to extended waiting lists for organ transplants. In order to overcome the lack of donors, the development of new therapeutic options is mandatory. In the last several years, organ bioengineering has been extensively explored to provide transplantable tissues or whole organs with the final goal of creating a three-dimensional growth microenvironment mimicking the native structure. It has been frequently reported that an extracellular matrix-based scaffold offers a structural support and important biological molecules that could help cellular proliferation during the recellularization process. The aim of the present review is to underline the recent developments in cell-on-scaffold technology for liver bioengineering, taking into account: (1) biological and synthetic scaffolds; (2) animal and human tissue decellularization; (3) scaffold recellularization; (4) 3D bioprinting; and (5) organoid technology. Future possible clinical applications in regenerative medicine for liver tissue engineering and for drug testing were underlined and dissected.

Sustained perfusion of revascularized bioengineered livers heterotopically transplanted into immunosuppressed pigs

Implanted bioengineered livers have not exceeded three days of continuous perfusion. Here, we show that decellularized whole porcine livers revascularized with human umbilical endothelial cells and implanted heterotopically into immunosuppressed pigs whose spleen has been removed can sustain perfusion for up to 15 days. We identified peak glucose consumption rate as a main predictor of the patency of the revascularized bioengineered livers (rBELs). On heterotopic implantation of the rBELs into pigs in the absence of anticoagulation therapy led to sustained perfusion for 3 days, followed by significant immune responses directed against the human endothelial cells. A 10-day steroid-based immunosuppression protocol and a splenectomy at time of rBEL implantation reduced the immune responses and resulted in continuous perfusion of the rBELs for over two weeks. We also show that the human endothelial cells in the perfused rBELs colonize the liver sinusoids and express sinusoidal endothelial markers similar to those in normal liver tissue. Revascularized liver scaffolds that can maintain blood perfusion at physiological pressures might eventually help overcome the chronic shortage of transplantable human livers.

Fast, robust and effective decellularization of whole human livers using mild detergents and pressure controlled perfusion

Human whole-liver perfusion-decellularization is an emerging technique for producing bio-scaffolds for tissue engineering purposes. The native liver extracellular matrix (ECM) provides a superior microenvironment for hepatic cells in terms of adhesion, survival and function. However, current decellularization protocols show a high degree of variation in duration. More robust and effective protocols are required, before human decellularized liver ECM can be considered for tissue engineering applications. The aim of this study is to apply pressure-controlled perfusion and test the efficacy of two different detergents in porcine and human livers. To test this, porcine livers were decellularized using two different protocols; a triton-x-100 (Tx100)-only protocol (N = 3) and a protocol in which Tx100 was combined with SDS (N = 3) while maintaining constant pressure of 120 mm Hg. Human livers (N = 3) with different characteristics (age, weight and fat content) discarded for transplantation were decellularized using an adapted version of the Tx-100-only protocol. Decellularization efficacy was determined by histology and analysis of DNA and RNA content. Furthermore, the preservation of ECM components was assessed. After completing the perfusion cycles with detergents the porcine livers from both protocols were completely white and transparent in color. After additional washing steps with water and DNase, the livers were completely decellularized, as no DNA or cell remnants could be detected. The Tx100-only protocol retained 1.5 times more collagen and 2.5 times more sGAG than the livers decellularized with Tx100 + SDS. The Tx100-only protocol was subsequently adapted for decellularizing whole-organ human livers. The human livers decellularized with pressure-controlled perfusion became off-white in color and semi-transparent within 20 h. Livers decellularized without pressure-controlled perfusion took 64-96 h to completely decellularize, but did not become white or transparent. The addition of pressure-controlled flow did remove all cells and double stranded DNA, but did not damage the ultra-structure of the ECM as was analyzed by histology and scanning electron microscopy. In addition, collagens and sGAG were maintained with the decellularized ECM. In conclusion, we established effective, robust and fast decellularization protocols for both porcine and human livers. With this protocol the duration of decellularization for whole-organ human livers has been shortened considerably. The increased pressure and flow did not damage the ECM, as major ECM components remained intact.

Decellularized liver transplant could be recellularized in rat partial hepatectomy model

In situ recellularization of the liver decellularized scaffold is a potential therapeutic alternative for liver transplantation. We aimed to develop an in situ procedure for recellularization of the rat liver using sodium lauryl ether sulfate (SLES) compared with Triton X-100/SDS. Rat liver specimens were rinsed with PBS, decellularized with either Triton X-100/SDS or SLES, and finally rinsed by distilled water. The efficiency of decellularized liver scaffolds was evaluated by histological, confocal Raman microscopy, histochemical staining, and DNA quantification assessments. Finally, in vivo studies were done to assess the biocompatibility of the liver scaffold by serum biochemical parameters and the recellularization capacity by histological and immunohistochemistry staining. Findings confirmed the preservation of extracellular matrix (ECM) components such as reticular, collagen, glycosaminoglycans, and neutral carbohydrates in both Triton X-100/SDS- and SLES-treated livers. Hoechst, feulgen, Hematoxylin and eosin, and DNA quantification assessments confirmed complete genetic content removal. The serological parameters showed no adverse impact on the liver functions. Transplantation of SLES-treated cell-free decellularized liver showed extensive neovascularization along with migration of the fibrocytes and adipocytes and some immune cells. Also, immunohistochemical staining showed that the oval cells, stellate cells, cholangiocytes and hepatocytes invaded extensively into the graft. It is concluded that SLES can be considered as a promising alternative in the liver decellularization process, and the transplanted decellularized liver can appropriately be revascularized and regenerated.

Development of an efficient perfusion-based protocol for whole-organ decellularization of the ovine uterus as a human-sized model and in vivo application of the bioscaffolds

PURPOSE

The main purpose of this investigation was to determine an efficient whole-organ decellularization protocol of a human-sized uterus and evaluate the in vivo properties of the bioscaffold.

METHODS

Twenty-four ovine uteri were included in this investigation and were decellularized by three different protocols (n 6). We performed histopathological and immunohistochemical evaluations, 4,6-diamidino-2-phenylindole (DAPI) staining, DNA quantification, MTT assay, scanning electron microscopy, biomechanical studies, and CT angiography to characterize the scaffolds. The optimized protocol was determined, and patches were grafted into the uterine horns of eight female Wistar rats. The grafts were extracted after 10 days; the opposite horns were harvested to be evaluated as controls.

RESULTS

Protocol III (perfusion with 0.25% and 0.5% SDS solution and preservation in 10% formalin) was determined as the optimized method with efficient removal of the cellular components while preserving the extracellular matrix. Also, the bioscaffolds demonstrated native-like biomechanical, structural, and vascular properties. Histological and immunohistochemical evaluations of the harvested grafts confirmed the biocompatibility and recellularization potential of bioscaffolds. Also, the grafts demonstrated higher positive reaction for CD31 and Ki67 markers compared with the control samples which indicated eminent angiogenesis properties and proliferative capacity of the implanted tissues.

CONCLUSIONS

This investigation introduces an optimized protocol for whole-organ decellularization of the human-sized uterus with native-like characteristics and a prominent potential for regeneration and angiogenesis which could be employed in in vitro and in vivo studies. To the best of our knowledge, this is the first study to report biomechanical properties and angiographic evaluations of a large animal uterine scaffold.

Liver Bioengineering: Promise, Pitfalls, and Hurdles to Overcome

PURPOSE OF REVIEW

In this review, we discuss the recent advancements in liver bioengineering and cell therapy and future advancements to improve the field towards clinical applications.

RECENT FINDINGS

3D printing, hydrogel-based tissue fabrication, and the use of native decellularized liver extracellular matrix as a scaffold are used to develop whole or partial liver substitutes. The current focus is on developing a functional liver graft through achieving a non-leaky endothelium and a fully constructed bile duct. Use of cell therapy as a treatment is less invasive and less costly compared to transplantation, however, lack of readily available cell sources with low or no immunogenicity and contradicting outcomes of clinical trials are yet to be overcome.

SUMMARY

Liver bioengineering is advancing rapidly through the development of in vitro and in vivo tissue and organ models. Although there are major challenges to overcome, through optimization of the current methods and successful integration of induced pluripotent stem cells, the development of readily available, patient-specific liver substitutes can be achieved.

Decellularization and recellularization of cornea: Progress towards a donor alternative

The global shortage of donor corneas for transplantation has led to corneal bioengineering being investigated as a method to generate transplantable tissues. Decellularized corneas are among the most promising materials for engineering corneal tissue since they replicate the complex structure and composition of real corneas. Decellularization is a process that aims to remove cells from organs or tissues resulting in a cell-free scaffold consisting of the tissues extracellular matrix. Here different decellularization techniques are described, including physical, chemical and biological methods. Analytical techniques to confirm decellularization efficiency are also discussed. Different cell sources for the recellularization of the three layers of the cornea, recellularization methods used in the literature and techniques used to assess the outcome of the implantation of such scaffolds are examined. Studies involving the application of decellularized corneas in animal models and human clinical studies are discussed. Finally, challenges for this technology are explored involving scalability, automatization and regulatory affairs.

Engineering nanocellulose hydrogels for biomedical applications

Nanocellulose hydrogels are highly hydrated porous cellulosic soft materials with good mechanical properties. These cellulose-based gels can be produced from bacterial or plant cellulose nanofibrils, which are hydrophilic, renewable, biodegradable and biocompatible. Nanocellulose, whether fibrils (CNF), crystals (CNC) or bacterial (BNC), has a high aspect ratio and surface area, and can be chemically modified with functional groups or by grafting biomolecules. Cellulose functionalization provides enhanced physical and chemical properties and control of biological interactions, tailoring its hydrogels for specific applications. Here, we critically review nanocellulose hydrogels for biomedical applications. Nanocellulose hydrogels have been demonstrated for 3D cell culture, mimicking the extracellular matrix (ECM) properties with low cytotoxicity. For wound dressing and cartilage repair, nanocellulose gels promote cell regeneration while providing the required mechanical properties for tissue engineering scaffolds. The encapsulation of therapeutics within nanocellulose allows the targeted delivery of drugs. Currently, cellulose crosslinking to peptides and proteins enables a new generation of low cost and renewable smart materials used in diagnostics. Last, the organized mesh of fibres contained in hydrogels drives applications in separation of biomolecules and cells. Nanocellulose hydrogels have emerged as a highly engineerable platform for multiple biomedical applications, providing renewable and performant solutions to life sciences.

Macroporous Dual-compartment Hydrogels for Minimally Invasive Transplantation of Primary Human Hepatocytes

BACKGROUND

Given the shortage of available organs for whole or partial liver transplantation, hepatocyte cell transplantation has long been considered a potential strategy to treat patients suffering from various liver diseases. Some of the earliest approaches that attempted to deliver hepatocytes via portal vein or spleen achieved little success due to poor engraftment. More recent efforts include transplantation of cell sheets or thin hepatocyte-laden synthetic hydrogels. However, these implants must remain sufficiently thin to ensure that nutrients can diffuse into the implant.

METHODS

To circumvent these limitations, we investigated the use of a vascularizable dual-compartment hydrogel system for minimally invasive transplantation of primary hepatocytes. The dual-compartment system features a macroporous outer polyethylene glycol diacrylate/hyaluronic acid methacrylate hydrogel compartment for seeding supportive cells and facilitating host cell infiltration and vascularization and a hollow inner core to house the primary human hepatocytes.

RESULTS

We show that the subcutaneous implantation of these cell-loaded devices in NOD/SCID mice facilitated vascular formation while supporting viability of the transplanted cells. Furthermore, the presence of human serum albumin in peripheral blood and the immunostaining of excised implants indicated that the hepatocytes maintained function in vivo for at least 1 month, the longest assayed time point.

CONCLUSIONS

Cell transplantation devices that assist the anastomosis of grafts with the host can be potentially used as a minimally invasive ectopic liver accessory to augment liver-specific functions as well as potentially treat various pathologies associated with compromised functions of liver, such as hemophilia B or alpha-1 antitrypsin deficiency.

Intraperitoneal transplantation of bioengineered humanized liver grafts supports failing liver in acute condition

Acute liver failure (ALF) is one of the most devastating fatal conditions which have posed crucial challenges to the clinicians and researchers for identifying permanent cure. Currently liver transplantation has been considered as the only managerial option. However it's wider applicability has been limited owing to non-availability of quality donor organs, cost-intensiveness, surgical hitches, life-long use of immunosuppressive drugs and long-term complications. Since last decades, several liver support systems have been developed for the management of failing liver in acute condition. However, the major limitation has been the lack of natural biological support and long-term survival of the grafts post-transplantation. Repopulation of decellularized xenogeneic organs is one of the emerging technologies for development of humanized neo-organs for demanding regenerative application. However, the earlier reported studies do not fulfil the insistence to provide immunologically tolerable humanized liver grafts for clinical applications. Here we demonstrate an efficient approach to generate transplantable humanized liver grafts which provides long-term support to the failing liver in Acute Liver Failure (ALF) animal models. These bioengineered humanized liver tissue grafts expresses several liver specific transcripts and performed crucial synthetic (albumin production) and detoxification (urea synthesis) functions at comparative level to normal liver. Intraperitoneal transplantation of these humanized liver grafts offered favourable microenvironment to exchange toxic substances across the barrier during ALF condition and provided long-term survival and function of the graft. In summary, the results of present study provide a first proof of concept in pre-clinical ALF animal model for the applicability of these bioengineered humanized livers in the management of failing liver on demand and may be considered as potential bridge to liver transplantation.

Decellularization and Solubilization of Porcine Liver for Use as a Substrate for Porcine Hepatocyte Culture: Method Optimization and Comparison

Biologic substrates, prepared by decellularizing and solubilizing tissues, have been of great interest in the tissue engineering field because of the preservation of complex biochemical constituents found in the native extracellular matrix (ECM). The integrity of the ECM is critical for cell behavior, adhesion, migration, differentiation, and proliferation that in turn affect homeostasis and tissue regeneration. Previous studies have shown that various processing methods have a distinctive way of affecting the composition of the decellularized ECM. In this study, we developed a bioactive substrate for hepatocytes in vitro, made of decellularized and solubilized liver tissue. The present work is a comparative approach of 2 different methods. First, we decellularized porcine liver tissue with ammonium hydroxide versus a sodium deoxycholate method, then characterized the decellularized tissue using various methods including double stranded DNA (dsDNA) content, DNA size, immunogenicity, and mass spectrometry. Second, we solubilized the decellularized porcine liver with hydrochloric acid versus acetic acid (AA) and characterized the resultant solubilized tissues using relevant methodologies including protein yield, immunogenicity, and bioactivity. Finally, we isolated primary porcine hepatocytes, cultured, and evaluated their bioactivity on the optimized decellularized–solubilized liver substrate. The decellularized porcine liver ECM processed by the ammonium hydroxide method and solubilized with AA displayed higher ECM integrity, low dsDNA, no evidence of intact nuclei, low human monocyte chemoattraction, and the presence of key molecules typically found in the native liver, a very important element for normal cell function. In addition, primary porcine hepatocytes showed enhanced functionality including albumin and urea production and bile canaliculi formation when cultured on the developed liver substrate compared to type I collagen.

Bioengineered functional humanized livers: An emerging supportive modality to bridge the gap of organ transplantation for management of end-stage liver diseases

End stage liver diseases (ESLD) represent a major, neglected global public health crisis which requires an urgent action towards finding a proper cure. Orthotropic liver transplantation has been the only definitive treatment modality for ESLD. However, shortage of donor organs, timely unavailability, post-surgery related complications and financial burden on the patients limits the number of patients receiving the transplants. Since last two decades cell-based therapies have revolutionized the field of organ/tissue regeneration. However providing an alternative organ source to address the donor liver shortage still poses potential challenges. The developments made in this direction provide useful futuristic approaches, which could be translated into pre-clinical and clinical settings targeting appropriate applications in specific disease conditions. Earlier studies have demonstrated the applicability of this particular approach to generate functional organ in rodent system by connecting them with portal and hepatic circulatory networks. However, such strategy requires very high level of surgical expertise and also poses the technical and financial questions towards its future applicability. Hence, alternative sites for generating secondary organs are being tested in several types of disease conditions. Among different sites, omentum has been proved to be more appropriate site for implanting several kinds of functional tissue constructs without eliciting much immunological response. Hence, omentum may be considered as better site for transplanting humanized bioengineered ex vivo generated livers, thereby creating a secondary organ at intra-omental site. However, the expertise for generating such bioengineered organs are limited and only very few centres are involved for investigating the potential use of such implants in clinical practice due to gap between the clinical transplant surgeons and basic scientists working on the concept evolution. Herein we discuss the recent advances and challenges to create functional secondary organs through intra-omental transplantation of ex vivo generated bioengineered humanized livers and their further application in the management of ESLD as a supportive bridge for organ transplantation.

Development of a biomimetic liver tumor-on-a-chip model based on decellularized liver matrix for toxicity testing

Cancer poses a great health threat to both developed and developing countries, and anti-cancer drugs are of important interest for improved clinical outcomes. Although tumor-on-a-chip technologies offer a feasible approach to screening drug toxicity, their capability to mimic the native tumor microenvironment (TME) is still limited. For better mimicry of the TME, we developed a biomimetic three-dimensional (3D) liver tumor-on-a-chip with the integration of essential components derived from decellularized liver matrix (DLM) with gelatin methacryloyl (GelMA) in a microfluidics-based 3D dynamic cell culture system. The biomimetic liver tumor-on-a-chip based on the integration of DLM components with GelMA, as opposed to GelMA only, had an increased capability to maintain cell viability and to enhance hepatocyte functions under flow conditions. The improved performance of the DLM-GelMA-based tumor-on-a-chip may be attributed to the provision of biochemical factors (e.g., growth factors), the preservation of scaffold proteins, and the reestablishment of biophysical cues (e.g., stiffness and shear stress) for better recapitulation of the 3D liver TME. Furthermore, this DLM-GelMA-based tumor-on-a-chip exhibited linear dose-dependent drug responses to the toxicity of acetaminophen and sorafenib. Taken together, our study demonstrates that the DLM-GelMA-based biomimetic liver tumor-on-a-chip better mimics the in vivo TME and holds great promise for a breadth of pathological and pharmacological studies.