Functionalized mesoporous silica nanoparticles for oral delivery of budesonide

Amorphous stabilization of BCS II drugs using mesoporous silica

This study aimed to investigate the amorphous stabilization of BCS Class II drugs using mesoporous silica as a carrier to produce amorphous solid dispersions. Ibuprofen, fenofibrate, and budesonide were selected as model drugs to evaluate the impact of molecular weight and partition coefficient on the solid state of drug-loaded mesoporous silica (MS) particles. The model drugs were loaded into three grades of MS, SYLYSIA SY730, SYLYSIA SY430, and SYLYSIA SY350, with pore diameters of 2.5 nm, 17 nm, and 21 nm, respectively, at 1:1, 2:1, and 3:1, carrier to drug ratios, and three different loading concentrations using solvent immersion and spray drying techniques. Differential scanning calorimetry (DSC) thermograms of SY430 and SY350 samples exhibited melting point depressions indicating constricted crystallization inside the pores, whereas SY730 samples with melting points matching the pure API may be a result of surface crystallization. Powder x-ray diffraction (PXRD) diffractograms showed all crystalline samples matched the diffraction patterns of the pure API indicating no polymorphic transitions and all 3:1 ratio samples exhibited amorphous halo profiles. Response surface regression analysis and Classification and Regression Tree (CART) analysis suggest carrier to drug ratios, followed by molecular weight, have the most significant impact on the crystallinity of a drug loaded into MS particles.

Stimuli-Responsive Silica Silanol Conjugates: Strategic Nanoarchitectonics in Targeted Drug Delivery

The design of novel drug delivery systems is exceptionally critical in disease treatments. Among the existing drug delivery systems, mesoporous silica nanoparticles (MSNs) have shown profuse promise owing to their structural stability, tunable morphologies/sizes, and ability to load different payload chemistry. Significantly, the presence of surface silanol groups enables functionalization with relevant drugs, imaging, and targeting agents, promoting their utility and popularity among researchers. Stimuli-responsive silanol conjugates have been developed as a novel, more effective way to conjugate, deliver, and release therapeutic drugs on demand and precisely to the selected location. Therefore, it is urgent to summarize the current understanding and the surface silanols' role in making MSN a versatile drug delivery platform. This review provides an analytical understanding of the surface silanols, chemistry, identification methods, and their property-performance correlation. The chemistry involved in converting surface silanols to a stimuli-responsive silica delivery system by endogenous/exogenous stimuli, including pH, redox potential, temperature, and hypoxia, is discussed in depth. Different chemistries for converting surface silanols to stimuli-responsive bonds are discussed in the context of drug delivery. The critical discussion is culminated by outlining the challenges in identifying silanols' role and overcoming the limitations in synthesizing stimuli-responsive mesoporous silica-based drug delivery systems.

Antibacterial and biofilm-inhibitory effects of vancomycin-loaded mesoporous silica nanoparticles on methicillin-resistant staphylococcus aureus and gram-negative bacteria

The present study aimed to prepare and characterize vancomycin-loaded mesoporous silica nanoparticles (Van-MSNs) to detect inhibitory effects on the planktonic and biofilm forms of methicillin-resistant Staphylococcus aureus (MRSA) isolates, and study the biocompatibility and toxicity of Van-MSNs in vitro as well as antibacterial activity of Van-MSNs against Gram-negative bacteria. The inhibitory effects of Van-MSNs were investigated on MRSA using the determination of minimum inhibitory (MIC) and minimum biofilm-inhibitory concentrations (MBIC) as well as the effect on bacterial attachment. Biocompatibility was studied by examining the effect of Van-MSNs on the lysis and sedimentation rate of red blood cells (RBC). The interaction of Van-MSNs with human blood plasma was detected by the SDS-PAGE approach. The cytotoxic effect of the Van-MSNs on human bone marrow mesenchymal stem cells (hBM-MSCs) was evaluated by the MTT assay. The antibacterial effects of vancomycin and Van-MSNs on Gram-negative bacteria were also investigated using MIC determination using the broth microdilution method. Furthermore, bacteria outer membrane (OM) permeabilization was determined. Van-MSNs showed inhibitory effects on planktonic and biofilm forms of bacteria on all isolates at levels lower than MICs and MBICs of free vancomycin, but the antibiofilm effect of Van-MSNs was not significant. However, Van-MSNs did not affect bacterial attachment to surfaces. Van-loaded MSNs did not show a considerable effect on the lysis and sedimentation of RBC. A low interaction of Van-MSNs was detected with albumin (66.5 kDa). The hBM-MSCs viability in exposure to different levels of Van-MSNs was 91-100%. MICs of ≥ 128 µg/mL were observed for vancomycin against all Gram-negative bacteria. In contrast, Van-MSNs exhibited modest antibacterial activity inhibiting the tested Gram-negative bacterial strains, at concentrations of ≤ 16 µg/mL. Van-MSNs increased the OM permeability of bacteria that can increase the antimicrobial effect of vancomycin. According to our findings, Van-loaded MSNs have low cytotoxicity, desirable biocompatibility, and antibacterial effects and can be an option for the battle against planktonic MRSA.

Quantitative Study of the Enhanced Content and Chemical Stability of Functional Groups in Mesoporous Silica by In-Situ Co-condensation Synthesis

The chemical stability and content of organic functional groups significantly affect the application of materials in the field of adsorption. In this study, we quantitatively studied the effect of in-situ co-condensation and post grafting on the physico-chemical properties and sorption properties of modified mesoporous silica. The results showed that the grafting method changed the morphology of mesoporous silica while the in-situ method kept the spherical morphology well, and the amino groups were both successfully introduced into the materials. Besides, the amino content of the material prepared by in-situ method (ami-MSN) was 2.71 mmol/g, which was significantly higher than the 0.98 mmol/g of the grafting method (ami-g-MS). Moreover, the chemical stability of functional groups in ami-MSN was much better than ami-g-MS. Furthermore, ami-MSN showed better capability in removing toxic metals of Pb, Cd, Ni, and Cu, and the removal efficiency of Pb reached 98.80%. Besides, ami-MSN exhibited higher dynamic CO2 adsorption of 0.78 mmol/g than ami-g-MS of 0.34 mmol/g. This study revealed the relationship between modification methods and the modification efficiency, functional groups stability, and sorption properties through quantitative comparative studies, which provided a reference for preparing modified mesoporous silica materials with high sorption properties.

Cytotoxicity of mesoporous silica modified by amino and carboxyl groups on vascular endothelial cells

Mesoporous silica is widely used because of its unique and excellent properties, especially it can be used as a drug carrier and gene carrier in the biomedical field. After the mesoporous silica is put into clinical use, it is more likely to be exposed in human body. Therefore, the effect of mesoporous silica on human body cannot be ignored. The injury of vascular endothelial cells is a prerequisite for the occurrence of many cardiovascular diseases. As a drug and gene carrier, mesoporous silica increases its contact with vascular endothelial cells, so its toxic effect on cardiovascular system cannot be ignored. In this study, amino (NH₂ ) and carboxyl (COOH) were modified on mesoporous silica SBA-15 by post-grafting. The results showed that it still maintained the one-dimensional hexagonal mesoporous structure of SBA-15 and had typical mesoporous structure. Then human umbilical vein endothelial cells (HUVECs) were infected with SBA-15, NH₂ -SBA-15, and COOH-SBA-15. The results showed that the functionalized mesoporous silica SBA-15 had cytotoxicity to HUVECs and damaged the cell membrane, but compared with the unmodified mesoporous silica SBA-15 the cytotoxicity of functionalized mesoporous silica SBA-15 was lower and the toxicity of carboxyl modified group was the lowest. By comparing the cell inhibition rate and the expression level of lactate dehydrogenate and reactive oxygen species induced by the three materials, oxidative damage and cell membrane damage may be two mechanisms of cytotoxicity. Mesoporous silica SBA-15 has an effect on cardiovascular system by inducing the high expression of nitric oxide, intercellular adhesive molecule-1 and vascular cell adhesive molecule-1 in HUVECs. In summary, our results show that mesoporous silica is toxic to vascular endothelial cells.

Effect of drug-coformer interactions on drug dissolution from a coamorphous in mesoporous silica

In this study, the molecular state of ritonavir (RTN)-saccharin (SAC) coamorphous incorporated into mesoporous silica by solvent evaporation and the effect of SAC on the RTN dissolution from mesopores were investigated. The amorphization of RTN-SAC was confirmed as a halo pattern in powder X-ray diffraction measurements and a single glass transition event in the modulated differential scanning calorimetry (MDSC) curve. ¹³C solid-state NMR spectroscopy revealed a hydrogen bond between the thiazole nitrogen of RTN and the amine proton of SAC. The glass transition of the RTN-SAC coamorphous in mesoporous silica was not found in the MDSC curve, indicating that RTN and SAC were monomolecularly incorporated into the mesopores. Solid-state NMR measurements suggested that the co-incorporation of SAC into the mesopores decreased the local mobility of the thiazole group of RTN via hydrogen bond formation. The RTN-SAC 1:1 coamorphous in mesoporous silica retained the X-ray halo-patterns after 30 d of storage, even under high temperature and humidity conditions. In the dissolution test, the RTN-SAC 1:1 coamorphous in mesoporous silica maintained RTN supersaturation for a longer time than the RTN amorphous in mesoporous silica. This study demonstrated that the drug-coformer interaction within mesoporous silica can significantly improve drug dissolution.

Virucidal Action Against Avian Influenza H5N1 Virus and Immunomodulatory Effects of Nanoformulations Consisting of Mesoporous Silica Nanoparticles Loaded with Natural Prodrugs

Background

Combating infectious diseases caused by influenza virus is a major challenge due to its resistance to available drugs and vaccines, side effects, and cost of treatment. Nanomedicines are being developed to allow targeted delivery of drugs to attack specific cells or viruses.

Materials and Methods

In this study, mesoporous silica nanoparticles (MSNs) functionalized with amino groups and loaded with natural prodrugs of shikimic acid (SH), quercetin (QR) or both were explored as a novel antiviral nanoformulations targeting the highly pathogenic avian influenza H5N1 virus. Also, the immunomodulatory effects were investigated in vitro tests and anti-inflammatory activity was determined in vivo using the acute carrageenan-induced paw edema rat model.

Results

Prodrugs alone or the MSNs displayed weaker antiviral effects as evidenced by virus titers and plaque formation compared to nanoformulations. The MSNs-NH₂-SH and MSNs-NH₂-SH-QR2 nanoformulations displayed a strong virucidal by inactivating the H5N1 virus. They induced also strong immunomodulatory effects: they inhibited cytokines (TNF-α, IL-1β) and nitric oxide production by approximately 50% for MSNs-NH₂-SH-QR2 (containing both SH and QR). Remarkable anti-inflammatory effects were observed during in vivo tests in an acute carrageenan-induced rat model.

Conclusion

Our preliminary findings show the potential of nanotechnology for the application of natural prodrug substances to produce a novel safe, effective, and affordable antiviral drug.

Morphological and Structural Properties of Amino-Functionalized Fumed Nanosilica and Its Comparison with Nanoparticles Obtained by Modified Stöber Method

In industry, silica nanoparticles (NPs) are obtained by the fuming and the precipitation method. Fumed silica NPs are commonly used in the preparation of nanocomposites because they have an extremely low bulk density (160-190 kg/m3), large surface area (50-600 m2/g), and nonporous surface, which promotes strong physical contact between the NPs and the organic phase. Fumed silica has fewer silanol groups (Si-OH) on its surface than the silica prepared by the Stöber method. However, the number of -OH groups on the fumed silica surface can be increased by pretreating them with sodium hydroxide (NaOH) before further surface modification. In this study, the effectiveness of the NaOH pretreatment was evaluated on commercial fumed silica NPs with a surface area of 200 m2/g. The number of surface -OH groups was estimated by potentiometric titration. The pretreated fumed NPs, and the precipitated NPs (prepared by the Stöber method) were modified with 3-aminopropyltriethoxysilane (APTES) to obtain A200S and nSiO2-APTES, respectively. The NPs were characterized using electron dispersive scanning (EDS), scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), BET (Brunauer-Emmett-Teller) analysis, and ζ-potential. XRD confirmed the presence of the organo-functional group on the surface of both NPs. After the amino-functionalization, the ζ-potential values of the nSiO2 and A200 changed from -35.5 mV and -14.4 mV to +26.2 mV and +11.76 mV, respectively. Consequently, we have successfully synthesized functionalized NPs with interesting, specific surface area and porosity (pore volume and size), which can be attractive materials for chemical and energy industries.

Design and characterization of dual responsive mesoporous silica nanoparticles for breast cancer targeted therapy

The main reason for limited efficacy of anticancer drug is the poor accretion of administered amount of drug within the tumor. Here, chitosan folate capped dual responsive mesoporous silica nanoparticles (MSNs) which can actively target cancer cells, and provide burst release of loaded anticancer drug within tumor cells and ultimately leading to improved therapeutic efficacy were synthesized. MSNs were synthesized using most economic silica source, sodium silicate. Doxorubicin (DOX) was loaded within the pores of MSNs and these drug loaded MSNs were first reacted with cystamine dihydrochloride followed by capping with chitosan-folate conjugate (CH-FA) to produce dual (redox and pH) responsive nanoparticles with the ability to actively target breast cancer cells. A triggered release of DOX from MSNs under acidic redox (pH 5.5, 10 mM GSH) environment was confirmed by in vitro release studies. The formulation exhibited 2.14 and 1.65 folds higher cytotoxicity than free drug against MCF-7 and MDA-MB-231 cells. DOX-MSN-SS-CH-FA showed superior tumor suppressing activity as compared to DOX-MSN or DOX alone in the treatment of Ehrlich Ascites Carcinoma (EAC) induced breast cancer with significantly reduced hematological and organ specific toxicities associated with DOX treatment.

Investigation of in vitro permeability and in vivo pharmacokinetic behavior of bare and functionalized MCM-41 and MCM-48 mesoporous silica nanoparticles: a burst and controlled drug release system for raloxifene

In the present work, MCM-41 and MCM-48 type of nanoparticles were successfully engineered. Effect of nanosize and amine functionalization on drug release, in vitro intestinal absorption and in vivo pharmacokinetic behavior was investigated in a comprehensive manner. The tailor-made bare and surface decorated MCM-41 and MCM-48 were synthesized and evaluated for their mesoporous skeleton, pore size, particle size, surface area, zeta potential, etc. by nitrogen sorption, DLS, TEM, etc. Incorporation of raloxifene (RLF) was affirmed using optimized immersion-solvent evaporation technique and its success confirmed by DSC, IR, and XRD analysis. TGA analysis revealed higher %grafting of amine groups on the exterior and larger RLF encapsulation into mesoporous derivate. The detailed in vitro release study revealed SGF to be the most compatible media for RLF showing an initial burst release from pristine nanoparticles and a delayed release from surface coated nanoparticles. Furthermore, release kinetics model data demonstrated Weibull and Higuchi as the best fit models for bare and amine-functionalized nanoparticles respectively. Moreover, an in vitro permeability study on Caco-2 cell line revealed higher absorption by engineered nanoparticle as compared to pure RLF and its marketed formulation. The supremacy in the in vivo pharmacokinetic parameters of RLF-41 and RLF-48 was demonstrated with 3.33 and 3.50 times enhancement in the bioavailability of RLF with respect to RLF suspension. To sum up, the results obtained were superior and promising for synthesized nanoparticles and more precisely for MCM-48 amongst them.

Mesoporous Silica Nanoparticles: A Comprehensive Review on Synthesis and Recent Advances

Recent advancements in drug delivery technologies utilizing a variety of carriers have resulted in a path-breaking revolution in the approach towards diagnosis and therapy alike in the current times. Need for materials with high thermal, chemical and mechanical properties have led to the development of mesoporous silica nanoparticles (MSNs). These ordered porous materials have garnered immense attention as drug carriers owing to their distinctive features over the others. They can be synthesized using a relatively simple process, thus making it cost effective. Moreover, by controlling the parameters during the synthesis; the morphology, pore size and volume and particle size can be transformed accordingly. Over the last few years, a rapid increase in research on MSNs as drug carriers for the treatment of various diseases has been observed indicating its potential benefits in drug delivery. Their widespread application for the loading of small molecules as well as macromolecules such as proteins, siRNA and so forth, has made it a versatile carrier. In the recent times, researchers have sorted to several modifications in the framework of MSNs to explore its potential in drug resistant chemotherapy, antimicrobial therapy. In this review, we have discussed the synthesis of these multitalented nanoparticles and the factors influencing the size and morphology of this wonder carrier. The second part of this review emphasizes on the applications and the advances made in the MSNs to broaden the spectrum of its use especially in the field of biomedicine. We have also touched upon the lacunae in the thorough understanding of its interaction with a biological system which poses a major hurdle in the passage of this carrier to the clinical level. In the final part of this review, we have discussed some of the major patents filed in the field of MSNs for therapeutic purpose.

Understanding Lignin Aggregation Processes. A Case Study: Budesonide Entrapment and Stimuli Controlled Release from Lignin Nanoparticles

The mechanism of lignin nanoprecipitation and subsequent self-assembly was elucidated by studying generation of lignin nanoparticles (LNPs) from aqueous ethanol. LNP formation was found to follow a kinetically controlled nucleation-growth mechanism in which large lignin molecules formed the initial critical nuclei. Using this information, we demonstrate entrapment of budesonide in LNPs and subsequent pH-triggered and surfactant-responsive release of this synthetic anti-inflammatory corticosteroid. Overall, our results not only provide a promising intestinal delivery system for budesonide but also deliver fundamental mechanistic understanding for the entrapment of actives in LNPs with controlled size and release properties.

Folic acid-conjugated mesoporous silica particles as nanocarriers of natural prodrugs for cancer targeting and antioxidant action

Naturally derived prodrugs have a wide range of pharmacological activities, including anticancer, antioxidant, and antiviral effects. However, significant barriers inhibit their use in medicine, e.g. their hydrophobicity. In this comprehensive study, we investigated simple and effective nanoformulations consisting of amine-functionalized and conjugated with folic acid (FA) mesoporous silica nanoparticles (MSNs). Two types of MSNs were studied: KCC- 1, with mean size 324 nm and mean pore diameter 3.4 nm, and MCM - 41, with mean size 197 and pore diameter 2 nm. Both types of MSNs were loaded with three anticancer prodrugs: curcumin, quercetin, and colchicine. The nanoformulations were tested to target in vitro human hepatocellular carcinoma cells (HepG2) and HeLa cancer cells. The amine-functionalized and FA-conjugated curcumin-loaded, especially KCC-1 MSNs penetrated all cells organs and steadily released curcumin. The FA-conjugated MSNs displayed higher cellular uptake, sustained intracellular release, and cytotoxicity effects in comparison to non-conjugated MSNs. The KCC-1 type MSNs carrying curcumin displayed the highest anticancer activity. Apoptosis was induced through specific signaling molecular pathways (caspase-3, H2O2, c-MET, and MCL-1). The nanoformulations displayed also an enhanced antioxidant activity compared to the pure forms of the prodrugs, and the effect depended on the time of release, type of MSN, prodrug, and assay used. FA-conjugated MSNs carrying curcumin and other safe natural prodrugs offer new possibilities for targeted cancer therapy.

Facile Synthesis of Chitosan Capped Mesoporous Silica Nanoparticles: A pH Responsive Smart Delivery Platform for Raloxifene Hydrochloride

An encapsulation of model drug raloxifene hydrochloride (RAL) inside the chitosan decorated pH responsive mesoporous system has a greater potential for accumulating in the tumor cells. The present study involves synthesis of surface modified mesoporous silica nanoparticles (MSN) with the aim of achieving pH sensitive drug delivery system. A silanol skeleton of MSN has been productively modified to amine intermediate which served as a firm platform to adapt chitosan grafted assembly and systematically evaluated. RAL incorporation inside the featured mesopores was performed employing novel immersion solvent evaporation methodology and evaluated further. The pH responsive behavior of formulated nano framework was studied at three different pH of a phosphate buffer saline individually. The in vitro cell viability assay on MCF-7 breast carcinoma cells was performed in time and concentration dependent manner. Finally, the hemolysis assay of designed nanoparticle was accomplished to envisage the hemocompatibility. The outcome of characterization details unveiled a perfect 2D hexagonal spherical structure gifted with higher surface area and optimum pore size for designed nanoparticles. The higher percentage grafting of amine and chitosan residue, i.e., 4.01 and 28.51% respectively along with 31.89 and 33.57% RAL loading efficiency made MSNs more attractive and applicable. Eventually, in vitro release study exhibited higher RAL release in acidic media for extended time periods confirming successful formation of pH responsive nanoparticle having controlled release property. Conclusively potential of designed nanosystem to serve efficient anti-cancer remedy was confirmed by superior behaviour of chitosan grafted MSN towards MCF-7 cells with supreme hemocompatibility.

Response of Fibroblasts MRC-5 to Flufenamic Acid-Grafted MCM-41 Nanoparticles

Recently, flufenamic acid (FFA) was discovered among fenamates as a free radical scavenger and gap junction blocker; however, its effects have only been studied in cancer cells. Normal cells in the surroundings of a tumor also respond to radiation, although they are not hit by it directly. This phenomenon is known as the bystander effect, where response molecules pass from tumor cells to normal ones, through communication channels called gap junctions. The use of the enhanced permeability and retention effect, through which drug-loaded nanoparticles smaller than 200 nm may accumulate around a tumor, can prevent the local side effect upon controlled release of the drug. The present work, aimed at functionalizing MCM-41 (Mobil Composition of Matter No. 41) silica nanoparticles with FFA and determining its biocompatibility with human fibroblasts MRC-5 (Medical Research Council cell strain 5). MCM-41, was synthesized and characterized structurally and chemically, with multiple techniques. The biocompatibility assay was performed by Live/Dead technique, with calcein and propidium–iodide. MRC-5 cells were treated with FFA-grafted MCM-41 for 48 h, and 98% of cells remained viable, without signs of necrosis or morphological changes. The results show the feasibility of MCM-41 functionalization with FFA, and its potential protection of normal cells, in comparison to the role of FFA in cancerous ones.

Mesoporous Silica Nanoparticles

Integration of nanotechnology and biomedicine has offered great opportunities for the development of nanoscaled therapeutic platforms. Amongst various nanocarriers, mesoporous silica nanoparticles (MSNs) is one of the most developed and promising inorganic materials-based drug delivery system for clinical translations due to their simple composition and nanoporous structure. MSNs possess unique structural features, for example, well-defined morphology, large surface areas, uniform size, controllable structure, flexible pore volume, tunable pore sizes, extraordinarily high loading efficiency, and excellent biocompatibility. Progress in structure control and functionalization may endow MSNs with functionalities that enable medical applications of these integrated nanoparticles such as molecularly targeted drug delivery, multicomponent synergistic therapy, in vivo imaging and therapeutic capability, on-demand/stimuli-responsive drug release, etc. In this chapter, the authors overview MSNs' characteristics and the scientific efforts developed till date involving drug delivery and biomedical applications.

Loading of polymyxin B onto anionic mesoporous silica nanoparticles retains antibacterial activity and enhances biocompatibility

Polymyxin B is a polycationic antibiotic used as the last line treatment against antibiotic-resistant Gram negative bacteria. However, application of polymyxin B is limited because of its toxicity effects. Herein, we used bare and surface modified mesoporous silica nanoparticles (MSNs) with an average diameter of 72.29 ± 8.17 nm as adsorbent for polymyxin B to improve its therapeutic properties. The polymyxin B adsorption onto MSN surfaces was explained as a function of pH, type of buffer and surface charge of nanoparticles, according to the ζ-potential of silica nanoparticles and adsorption kinetics results. The highest value of the adsorption capacity (about 401 ± 15.38 mg polymyxin B/ g silica nanoparticles) was obtained for the bare nanoparticles in Tris buffer, pH 9. Release profiles of polymyxin B showed a sustained release pattern, fitting Power law and Hill models. The antibiotic molecules-loaded nanoparticles showed enhanced antibacterial activity compared to free antibiotic against different Gram negative bacteria. Biocompatibility evaluation results revealed that loading of polymyxin B onto MSNs can decrease the cytotoxicity effects of the drug by reducing ROS generation. Our results suggest that formulation of drugs by adsorption onto MSNs may offer a way forward to overcome the adverse effects of some antibiotics such as polymyxin B without compromising their antimicrobial properties.

Inkjet Printing of Drug-Loaded Mesoporous Silica Nanoparticles-A Platform for Drug Development

Mesoporous silica nanoparticles (MSNs) have shown great potential in improving drug delivery of poorly water soluble (BCS class II, IV) and poorly permeable (BCS class III, IV) drugs, as well as facilitating successful delivery of unstable compounds. The nanoparticle technology would allow improved treatment by reducing adverse reactions of currently approved drugs and possibly reintroducing previously discarded compounds from the drug development pipeline. This study aims to highlight important aspects in mesoporous silica nanoparticle (MSN) ink formulation development for digital inkjet printing technology and to advice on choosing a method (2D/3D) for nanoparticle print deposit characterization. The results show that both unfunctionalized and polyethyeleneimine (PEI) surface functionalized MSNs, as well as drug-free and drug-loaded MSN-PEI suspensions, can be successfully inkjet-printed. Furthermore, the model BCS class IV drug remained incorporated in the MSNs and the suspension remained physically stable during the processing time and steps. This proof-of-concept study suggests that inkjet printing technology would be a flexible deposition method of pharmaceutical MSN suspensions to generate patterns according to predefined designs. The concept could be utilized as a versatile drug screening platform in the future due to the possibility of accurately depositing controlled volumes of MSN suspensions on various materials.

In vitro dissolution models for the prediction of in vivo performance of an oral mesoporous silica formulation

Drug release from mesoporous silica systems has been widely investigated in vitro using USP Type II (paddle) dissolution apparatus. However, it is not clear if the observed enhanced in vitro dissolution can forecast drug bioavailability in vivo. In this study, the ability of different in vitro dissolution models to predict in vivo oral bioavailability in a pig model was examined. The fenofibrate-loaded mesoporous silica formulation was compared directly to a commercial reference product, Lipantil Supra®. Three in vitro dissolution methods were considered; USP Type II (paddle) apparatus, USP Type IV (flow-through cell) apparatus and a USP IV Transfer model (incorporating a SGF to FaSSIF-V2 media transfer). In silico modelling, using a physiologically based pharmacokinetic modelling and simulation software package (Gastroplus™), to generate in vitro/in vivo relationships, was also investigated. The study demonstrates that the in vitro dissolution performance of a mesoporous silica formulation varies depending on the dissolution apparatus utilised and experimental design. The findings show that the USP IV transfer model was the best predictor of in vivo bioavailability. The USP Type II (paddle) apparatus was not effective at forecasting in vivo behaviour. This observation is likely due to hydrodynamic differences between the two apparatus and the ability of the transfer model to better simulate gastrointestinal transit. The transfer model is advantageous in forecasting in vivo behaviour for formulations which promote drug supersaturation and as a result are prone to precipitation to a more energetically favourable, less soluble form. The USP IV transfer model could prove useful in future mesoporous silica formulation development. In silico modelling has the potential to assist in this process. However, further investigation is required to overcome the limitations of the model for solubility enhancing formulations.

Nanoassemblies constructed from bimodal mesoporous silica nanoparticles and surface-coated multilayer pH-responsive polymer for controlled delivery of ibuprofen

The pH-sensitive poly(D-A) grafted amine-functionalized bimodal mesoporous silica (D-A/BMMs) was prepared by a facile method used as a drug delivery vehicle. They exhibited superior properties such as good dispersion in aqueous medium, high drug loading efficiency, improved stability and high drug release rates. Meanwhile, its structural features and performances in a controlled delivery of ibuprofen (IBU) were systematically investigated by using XRD, N2 adsorption and desorption, SEM, TEM, FT-IR, elemental analysis and TG techniques. The results demonstrated that the obtained nanocomposite presented a flexible control over drug release by controlling the grafting amount of D-A onto the mesopores surface of aminated BMMs. The cumulative percent release of IBU from D-A/BMMs was found to be much higher at pH 7.4 than at pH 2.0. The release rate was very slow in an acidic medium but became faster in a neutral medium, owing to hydrogen bonding in an acidic medium and electrostatic repulsion between negatively charged carboxyl groups in an alkaline medium.

Mesostructured silica and aluminosilicate carriers for oxytetracycline delivery systems

Oxytetracycline delivery systems containing various MCM-type silica and aluminosilicate with different antibiotic content were developed in order to establish the influence of the support structural and textural properties and aluminum content on the drug release profile. The antibiotic molecules were loaded into the support mesochannels by incipient wetness impregnation method using a drug concentrated aqueous solution. The carriers and drug-loaded materials were investigated by small- and wide-angle XRD, FTIR spectroscopy, TEM and N2 adsorption-desorption isotherms. Faster release kinetics of oxytetracycline from uncalcined silica and aluminosilicate supports was observed, whereas higher drug content led to lower delivery rate. The presence of aluminum into the silica network also slowed down the release rate. The antimicrobial assays performed on Staphylococcus aureus clinical isolates showed that the oxytetracycline-loaded materials containing MCM-41-type mesoporous silica or aluminosilicate carriers inhibited the bacterial development.