Functionalization of SBA-15 mesoporous silica with bis-schiff base for the selective removal of Pb(II) from water

Removal of Hg(II) with MgAl-layered double hydroxide functionalized by schiff base ligands: Application and condition optimization

To effectively remove heavy metal Hg(II) from water bodies, a novel adsorbent of MgAl-layered double hydroxide (LDH) was designed and functionalized with Schiff base. The characterization results of the adsorbent (MgAl-LDH@SiO2-AG) show that the Schiff base polymer was successfully coated onto the outside surface of MgAl-LDH with hexagonal structure. The theoretical maximum adsorption capacity to Hg(II) is 228.46 mg/g at pH 7 and 298 K. The different pH solutions were investigated from pH 2 to 8, and the optimal capacity of MgAl-LDH@SiO2-AG toward Hg(II) achieves 268.7 mg/g at pH = 7.2, T = 36.8 °C, C0 = 32.1 mg/L and dosage = 0.083 g/L. In reality, the adsorbent not only exhibits efficient removal of Hg(II) in various water bodies, including lake water, river water, effluent from sewage treatment plant, but also has an excellent selectivity in electroplating wastewater containing different heavy metal ions. Low contents of TN and TP in real wastewater have less effect on the removal of Hg(II). Moreover, the prepared adsorbent had a good reusability and stability. The reaction mechanism mainly involves chelation with nitrogen/oxygen-containing groups and the predominant participation of nitrogen atoms in the Schiff base functional group. The removal of Hg(II) relies on the pseudo-second-order kinetics and Langmuir model, and is an endothermic and spontaneous chemical reaction. The present work offers a practical method for preparing highly effective adsorptive materials with the LDH composites and for the treatment of heavy metal Hg(II) from water bodies.

Schiff base functionalized dialdehyde starch for enhanced removal of Cu (II): Preparation, performances, DFT calculations

Dialdehyde starch modified by 2-hydrazinopyridine (HYD-DAS) based on the reaction of dialdehyde starch (DAS) and 2-hydrazinopyridine was synthesized and characterized by FT-IR spectra, element analysis and SEM. HYD-DAS can efficiently adsorb Cu (II) ion to demonstrate visual color changes from yellow to dark brown in aqueous solutions. The influence on HYD-DAS to Cu (II) adsorption including pH value of solution, isotherm, kinetics, thermodynamics and possible mechanism had also been examined. Batch experiments indicate that HYD-DAS's to Cu (II) adsorption reaches equilibrium within 250 min, and its adsorption capacity and rate are 195.75 mg/g and 98.63 %, respectively. Moreover, HYD-DAS to Cu (II) adsorption remains robust and underscoring after five cycles to exhibit good selectivity and reusability. Kinetics studies suggest the absorption process follows a quasi-second-order with isotherms aligning to the Langmuir monolayer model, and thermodynamics reveals that it is a spontaneous endothermic nature of adsorption. Based on the analyses of XPS and DFT calculations, a possible mechanism for HYD-DAS to Cu (II) adsorption is that Cu (II) combined with nitrogen atoms from Schiff base and hydrazine pyridine ring in HYD-DAS.

Coumarin derivative-functionalized nanoporous silica as an on-off fluorescent sensor for detecting Fe3+ and Hg2+ ions: a circuit logic gate

A highly efficient fluorescent sensor (S-DAC) was easily created by functionalizing the SBA-15 surface with N-(2-Aminoethyl)-3-Aminopropyltrimethoxysilane followed by the covalent attachment of 7-diethylamino 3-acetyl coumarin (DAC). This chemosensor (S-DAC) demonstrates selective and sensitive recognition of Fe3+ and Hg2+ in water-based solutions, with detection limits of 0.28 × 10-9 M and 0.2 × 10-9 M for Hg2+ and Fe3+, respectively. The sensor's fluorescence characteristics were examined in the presence of various metal ions, revealing a decrease in fluorescence intensity upon adding Fe3+ or Hg2+ ions at an emission wavelength of 400 nm. This sensor was also able to detect ferric and mercury ions in spinach and tuna fish. The quenching mechanism of S-DAC was investigated using UV-vis spectroscopy, which confirmed a static-type mechanism for fluorescence quenching. Moreovre, the decrease in fluorescence intensity caused by mercury and ferric ions can be reversed using trisodium citrate dihydrate and EDTA as masking agents, respectively. As a result, a circuit logic gate was designed using Hg2+, Fe3+, trisodium citrate dihydrate, and EDTA as inputs and the quenched fluorescence emission as the output.

New Approaches for Pb(II) Removal from Aqueous Media Using Nanopowder Sodium Titanosilicate: Kinetics Study and Thermodynamic Behavior

Microporous sodium titanosilicate, Na2TiSiO5, has been successfully prepared using the sol-gel method. The structural and morphological characterization of synthesized product has been made via thermal analyses (TG-DTG), X-ray diffraction (XRD), and electron microscopy (SEM and TEM). Adsorption properties of the synthesized Na2TiSiO5 nanopowder for Pb(II) removal of aqueous media was investigated in different experimental conditions such as the contact time, the initial metal concentration, the pH, and the temperature. The Pb(II) adsorption on Na2TiSiO5 was discussed according to the kinetics and thermodynamics models. The adsorption kinetics of Pb(II) have been better described by the PS-order kinetic model which has the highest fitting correlation coefficients (R2: 0.996-0.999) out of all the other models. The adsorption results have been successfully fitted with the Langmuir and Redlich-Paterson models (R2: 0.9936-0.9996). The calculated thermodynamic parameters indicate that the Pb(II) adsorption is an endothermic process, with increased entropy, having a spontaneous reaction. The results have revealed a maximum adsorption capacity of 155.71 mg/g at 298 K and a very high adsorption rate at the beginning, more than 85% of the total amount of Pb(II) being removed within the first 120 min, depending on the initial concentration.

Adsorption of Pb2+ and Cu2+ in wastewater by lignosulfonate adsorbent prepared from corn straw

The heavy metal ions contained in industrial wastewater are a great threat to human health. Exploring a adsorbent which have low-cost, green environmental friendly, high adsorption capacity, good recycle is key to solve heavy metal ions pollution. Lignin sulfonate was obtained by treating corn stover, and then modified lignin sulfonate was obtained by hydrothermal method. The porous structure makes heavy metal ions occupy more internal adsorption sites. Modified lignosulfonate adsorbent efficiency removes heavy metals in wastewater especially Cu2+ and Pb2+. The adsorption capacity of Cu2+ on modified lignosulfonate is 450.3 mg g-1, Pb2+ is 475.4 mg g-1. In addition, for 40 mg L-1 Cu2+ and Pb2+ using 0.4 g L-1, the adsorption equilibrium is only reached within 60 min. Meanwhile, the removal ratio of Pb is 83 %, Cd is 72 %, Cu is 87 %, Zn is 36 %, Mn is 25 %, Cr is 95 %, and Fe is 99 % in wastewater using 0.4 g L-1 adsorbent in 2 h. This research develops a practical adsorbent to remove heavy metals from actual wastewater.

Recent advances in adsorption of environmental pollutants using metal-organic frameworks-based hydrogels

Water pollution is increasing significantly owing to industrialization and population growth that lead to serious environmental and health issues. Therefore, the design and development of more effective wastewater treatment approaches are necessary due to a significant upsurge in demand for freshwater. More recently, metal-organic frameworks (MOFs) have attracted attention in environmental science owing to their tunable porosity, unique structure, flexibility, and various composition. Despite these attractive advantages, some drawbacks, including intrinsic fragility, unsatisfied processability, dust formation, and poor reusability, have greatly limited their applications. Therefore, MOFs are often designed as supported-based MOFs (e.g., MOFs-coated composites) or 3D structured composites, such as MOFs-based hydrogels. MOFs-based hydrogels are excellent candidates in the sorption process because of their appropriate adsorption capacity, porous structure, good mechanical properties, durability as well as biodegradable features. In this review, the removal of different pollutants (e.g., synthetic dyes, phosphates, heavy metals, antibiotics, and some organic compounds) from aqueous media has been studied by the adsorption process using MOFs-based hydrogels. The important advancements in the fabrication of MOFs-based hydrogels and their capacities in the adsorption of pollutants under experimental conditions have been discussed. Finally, problems and future perspectives on the adsorption process using MOFs-based hydrogels have been investigated.

Fabrication of a waste cotton fabrics-based nanosystem for simultaneous removal of Cu(II) and Pb(II)

Herein, a waste cotton fabrics-based nanosystem was fabricated to simultaneously remove copper (Cu(II)) and lead ions (Pb(II)) from water and soil. Therein, carboxyl-functionalized zinc oxide microsphere (ZnO-COOH) with peanut shape was carried by cotton fabric (CF) to get CF/ZnO-COOH nanosystem. CF/ZnO-COOH with a good foldable property possessed a high removal capacity for Cu(II) and Pb(II) via electrostatic attraction and chelation. The result indicated that their removal efficiencies of CF/ZnO-COOH could reach over 95% after 2 h. The adsorption process was consistent with Langmuir (R² = 0.9905 of Cu(II) and R² = 0.9846 of Pb(II)) and pseudo-second-order kinetic models (R² = 0.9999 of Cu(II) and R² = 0.9999 of Pb(II)). The thermodynamic data showed that the adsorption process was spontaneous and exothermic. Additionally, CF/ZnO-COOH also possessed a high fixation ability for Cu(II) and Pb(II) in sand-soil column, especially for Pb(II) (15 cm, 0.4 μg kg^-1). Therefore, this wok provides an environmentally friendly and efficient way to remove Cu(II) and Pb(II) from water and soil concurrently.

Construction of a Carbon/Lignosulfonate Adsorbent to Remove Pb2+ and Cu2

Removing heavy metal ions from water is an important issue to improve water quality. However, using cost-effective and more environmentally friendly adsorbents to achieve efficient adsorption capacity remains a challenge. Carbon spheres were prepared by the hydrothermal method and then combined with sodium lignosulfonate to form a lignosulfonate carbon (C/SL) adsorbent. C/SL achieved the adsorption of Pb²⁺ and Cu²⁺ after 60 min (the adsorption capacity was 281 mg g^-1 for Pb²⁺ and 276mg g^-1 for Cu²⁺) and had good selectivity and reusability (5 cycles). The simulated experimental data show that the pseudo-second-order kinetics and Langmuir isotherm are closer to the actual adsorption. Thermodynamic studies show that the adsorption of Pb²⁺ and Cu²⁺ is enhanced by the spontaneous process at higher temperature. This study also shows that functional groups such as hydroxyl and amino groups play an important role in the adsorption process.

Preparation of bis-Schiff base immobilized mesoporous SBA-15 nanosensor for the fluorogenic sensing and adsorption of Cu2+

The inorganic−organic chemosensing material (MS-NSP) was developed by anchoring the bis-Schiff base fluorophore onto the channel surface of SBA-15 mesoporous silica surface with a quaternary ammonium linker. The mesostructure, morphology,...