Synthesis and characterization of Fe2O3–ZnO–ZnFe2O4/carbon nanocomposite and its application to removal of bromophenol blue dye using ultrasonic assisted method: Optimization by response surface methodology and genetic algorithm

Simultaneous optimization of production yield and sulfadiazine adsorption of MgFe2O4 loaded on prickly pear biochars using Box-Behnken design

A major challenge that humans facing is the uncontrolled discharge of antibiotic-containing wastewater into the environment, accompanying with huge threats to human community. The utilization of cost-effective biomass-based adsorbents is considered a potential solution for the treatment of antibiotic wastewater. This study aims to optimize the synthesis of MgFe2O4 nanoparticles loaded on prickly pear biochar (PPB) with outstanding sulfadiazine adsorbability using response surface methodology. Thirteen materials (MgFe2O4-PPB) produced based on Box-Behnken design were tested to evaluate the impact of the main factors on the material preparation process, including ratio of MgFe2O4:PPB precursors, calcination temperature and calcination time. Under optimized conditions, i.e., MgFe2O4:PPB ratio 0.5, temperature 600 °C and time 1 h, the production yield of 46.5% and sulfadiazine removal percentage of 85.4% were obtained. Characterization of optimized MgFe2O4-PPB indicated the good porosity and functionality suitable for the adsorption of sulfadiazine. Elovich model showed the best description of kinetic process. Temkin model was considered to be an accurate description of the isotherm adsorption. Proposed mechanism for antibiotic adsorption onto MgFe2O4-PPB was described. We clarify cost-benefit analysis to asses the importance of MgFe2O4-PPB as well as the economic and environmental impacts of biochar-based composites.

A detailed insight on fabricated porous chitosan in eliminating synthetic anionic dyes from single and multi-adsorptive systems with related studies

Chitosan was fabricated via gelation method using CaBr₂.xH₂O/methanol solution and was studied as a potential adsorbent (MCh) in adsorbing anionic synthetic dyes like Bromophenol blue (BB), Direct blue 6 (DB) and Congo red (CR) from single (one dye species at a time) and multi (having two dyes; binary and all three dyes; tertiary) adsorptive systems. Physico-chemical modifications of MCh surface prior and post modification and dye adsorption were evaluated using scanning electron microscopy, Energy-dispersive X-ray spectroscopy, powder X-ray diffraction analysis, surface area analysis and Fourier-transformed infrared spectroscopy. Influential parameters influencing the adsorption process viz. initial pH of dye solution, MCh dosage, adsorption temperature and initial concentration of dye species were optimised. Adsorptive studies involving single adsorptive setups verified formation of sorbate's (dye species) monolayer over the sorbent's (MCh) surface via chemisorption; as established by Langmuir isotherm and pseudo-second order kinetics model analysis. Theoretical maximum adsorption capacities of MCh for BB, DB and CR was found to be 81.301 mg/g, 163.934 mg/g and 75.758 mg/g, respectively. Meanwhile, for all multi-adsorptive systems, competitive Langmuir isotherm model verified antagonistic behaviour of an individual dye over other dye adsorption over MCh surface in their respective adsorptive systems. Thermodynamics of the sorbate-sorbent interaction was exothermic, spontaneous, with elevated degree of disorderedness; concluding the interaction as thermodynamically favourable. Co-existing metal cations and anionic salts had minimal effect on MCh's adsorption efficiency. Phytotoxicity assay via germination of Vigna mungo seeds verified the efficacy of the adsorbent in eliminating the dye species from single and multi-adsorptive systems.

Solar light active silver/iron oxide/zinc oxide heterostructure for photodegradation of ciprofloxacin, transformation products and antibacterial activity

This paper reports on the multitasking potential of a silver/iron oxide/zinc oxide (Ag/Fe₂O₃/ZnO) heterostructure, which was used for the photocatalytic decomposition of ciprofloxacin (CPX) and bacterial disinfection. The Ag/Fe₂O₃/ZnO heterostructure was successfully prepared using a facile precipitation method, and characterization results showed interesting structural, morphological, compositional and luminescent properties. The morphological results of the prepared heterostructure confirmed the deposition of Ag nanoparticles onto the surface of ZnO nanoplates and Fe₂O₃ nanorods. Treatment studies showed that the Ag/Fe₂O₃/ZnO heterostructure had superior solar light driven photocatalytic activity towards CPX degradation (76.4%) compared to bare Fe₂O₃ nanorods (43.2%) and ZnO nanoplates (63.1%), Ag/Fe₂O₃ (28.2%) and Ag/ZnO (64.5%) under optimized conditions (initial CPX concentration: 10 mg/L; pH 4; catalyst loading: 0.3 g/L). Reactive species study confirmed the roles of e^-, h⁺, OH and O₂^- in the photocatalytic degradation process. This photocatalytic behaviour of the Ag/Fe₂O₃/ZnO heterostructure could be attributed to the improved full solar spectrum harvesting capacity, separation of charge carriers and migration of e^-/h⁺ across the heterostructure interface. In addition, the Ag/Fe₂O₃/ZnO heterostructure also showed good antibacterial activity against Escherichia coli (E. coli) under both dark and visible light conditions. This might be due to generation of reactive oxygen species during the reaction. To the best of our knowledge, this is the first study till date on the utilization of Ag/Fe₂O₃/ZnO heterostructure for the photocatalytic degradation of CPX and E. coli bacteria disinfection. Therefore, this work offers an attractive path to design ZnO-based ternary heterostructures for solar-driven applications in wastewater remediation.

Preparation of Magnetic Fe₃O₄/MIL-88A Nanocomposite and Its Adsorption Properties for Bromophenol Blue Dye in Aqueous Solution

Metal-organic frameworks (MOFs) are considered as good materials for the adsorption of many environmental pollutants. In this study, magnetic Fe₃O₄/MIL-88A composite was prepared by modification of MIL-88A with magnetic nanoparticles using the coprecipitation method. The structures and magnetic property of magnetic Fe₃O₄/MIL-88A composite were characterized and the adsorption behavior and mechanism for Bromophenol Blue (BPB) were evaluated. The results showed that magnetic Fe₃O₄/MIL-88A composite maintained a hexagonal rod-like structure and has good magnetic responsibility for magnetic separation (the maximum saturation magnetization was 49.8 emu/g). Moreover, the maximum adsorption amount of Fe₃O₄/MIL-88A composite for BPB was 167.2 mg/g and could maintain 94% of the initial adsorption amount after five cycles. The pseudo-second order kinetics and Langmuir isotherm models mostly fitted to the adsorption for BPB suggesting that chemisorption is the rate-limiting step for this monomolecular-layer adsorption. The adsorption capacity for another eight dyes (Bromocresol Green, Brilliant Green, Brilliant Crocein, Amaranth, Fuchsin Basic, Safranine T, Malachite Green and Methyl Red) were also conducted and the magnetic Fe₃O₄/MIL-88A composite showed good adsorption for dyes with sulfonyl groups. In conclusion, magnetic Fe₃O₄/MIL-88A composite could be a promising adsorbent and shows great potential for the removal of anionic dyes containing sulfonyl groups.

Comparison of photo-Fenton, O3/H2O2/UV and photocatalytic processes for the treatment of gray water

This research was carried out to compare and optimize the gray water treatment performance by the photo-Fenton, photocatalysis and ozone/H₂O₂/UV processes. Experimental design and optimization were carried out using Central Composite Design of Response Surface Methodology. The results of experiments showed that the most effective and influencing factors in photo-Fenton process were H₂O₂/Fe²⁺ ratio, in ozone/H₂O₂/UV experiment were O₃ concentration, H₂O₂ concentration, reaction time and pH and in photocatalytic process were TiO₂ concentration, pH and reaction time. The highest COD removal in photo-Fenton, ozone/H₂O₂/UV and photocatalytic process were 90%, 92% and 55%, respectively. The results were analyzed by design expert software and for all three processes second-order models were proposed to simulate the COD removal efficiency. In conclusion the ozone/H₂O₂/UV process is recommended for the treatment of gray water, since it was able to remove both COD and turbidity by 92% and 93%, respectively.

Fuzzy logic modeling of Pb (II) sorption onto mesoporous NiO/ZnCl2-Rosa Canina-L seeds activated carbon nanocomposite prepared by ultrasound-assisted co-precipitation technique

In this study, NiO/Rosa Canina-L seeds activated carbon nanocomposite (NiO/ACNC) was prepared by adding dropwise NaOH solution (2mol/L) to raise the suspension pH to around 9 at room temperature under ultrasonic irradiation (200W) as an efficient method and characterized by FE-SEM, FTIR and N₂ adsorption-desorption isotherm. The effect of different parameters such as contact time (0-120min), initial metal ion concentration (25-200mg/L), temperature (298, 318 and 333K), amount of adsorbent (0.002-0.007g) and the solution's initial pH (1-7) on the adsorption of Pb (II) was investigated in batch-scale experiments. The equilibrium data were well fitted by Langmuir model type 1 (R²>0.99). The maximum monolayer adsorption capacity (q_m) of NiO/ACNC was 1428.57mg/L. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) were also calculated. The results showed that the adsorption of Pb (II) onto NiO/ACNC was feasible, spontaneous and exothermic under studied conditions. In addition, a fuzzy-logic-based model including multiple inputs and one output was developed to predict the removal efficiency of Pb (II) from aqueous solution. Four input variables including pH, contact time (min), dosage (g) and initial concentration of Pb (II) were fuzzified using an artificial intelligence-based approach. The fuzzy subsets consisted of triangular membership functions with eight levels and a total of 26 rules in the IF-THEN approach which was implemented on a Mamdani-type of fuzzy inference system. Fuzzy data exhibited small deviation with satisfactory coefficient of determination (R²>0.98) that clearly proved very good performance of fuzzy-logic-based model in prediction of removal efficiency of Pb (II). It was confirmed that NiO/ACNC had a great potential as a novel adsorbent to remove Pb (II) from aqueous solution.

Ultrasound assisted extraction of Maxilon Red GRL dye from water samples using cobalt ferrite nanoparticles loaded on activated carbon as sorbent: Optimization and modeling

In this research, a selective, simple and rapid ultrasound assisted dispersive solid-phase micro-microextraction (UA-DSPME) was developed using cobalt ferrite nanoparticles loaded on activated carbon (CoFe₂O₄-NPs-AC) as an efficient sorbent for the preconcentration and determination of Maxilon Red GRL (MR-GRL) dye. The properties of sorbent are characterized by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Vibrating sample magnetometers (VSM), Fourier transform infrared spectroscopy (FTIR), Particle size distribution (PSD) and Scanning Electron Microscope (SEM) techniques. The factors affecting on the determination of MR-GRL dye were investigated and optimized by central composite design (CCD) and artificial neural networks based on genetic algorithm (ANN-GA). CCD and ANN-GA were used for optimization. Using ANN-GA, optimum conditions were set at 6.70, 1.2mg, 5.5min and 174μL for pH, sorbent amount, sonication time and volume of eluent, respectively. Under the optimized conditions obtained from ANN-GA, the method exhibited a linear dynamic range of 30-3000ngmL^-1 with a detection limit of 5.70ngmL^-1. The preconcentration factor and enrichment factor were 57.47 and 93.54, respectively with relative standard deviations (RSDs) less than 4.0% (N=6). The interference effect of some ions and dyes was also investigated and the results show a good selectivity for this method. Finally, the method was successfully applied to the preconcentration and determination of Maxilon Red GRL in water and wastewater samples.

Tunable auto-combustion preparation of TiO2nanostructures as efficient adsorbents for the removal of an anionic textile dye

We have developed a new route for the synthesis of pure TiO₂nanostructuresviaa facile auto-combustion method followed by heat treatment.