Fabrication of water-compatible molecularly imprinted polymer based on β-cyclodextrin modified magnetic chitosan and its application for selective removal of bisphenol A from aqueous solution

Fabrication of magnetic hydrophilic imprinted polymers via two-step immobilization approach for targeted detecting bisphenol A

Molecularly imprinted polymer with water-compatibility for effective separation and enrichment of targeted trace pollutants from complicated matrix has captured extensive attention in terms of their high selectivity and matrix compatibility. This study focuses on modified β-cyclodextrin is used as a hydrophilic functional monomer to develop magnetic molecularly imprinted polymers (MMIPs). MMIPs were prepared using Fe3O4 nanoparticles as carriers and bisphenol A (BPA) as templates using a two-step fixation strategy and surface imprinting technology. The structural characteristic and binding properties of the prepared MMIPs were thoroughly studied. The MMIPs exhibited high crystallinity, high adsorption capacity, fast rebinding rate, remarkable selectivity and distinguish reusability. In addition, through magnetic solid-phase extraction separation technology and high-performance liquid chromatography ultraviolet quantitative detection technology, MMIPs are used for selective enrichment and detection of BPA in complex media such as environmental water and milk. This work provides a new route to construct the hydrophilic molecularly imprinted materials and a new sight on developing more effective sample pretreatment strategies for monitoring targeted pollution in complicated aqueous media.

Preparation of chitosan-iron oxide modified sludge-based biochar for effective removal of tetracycline from water: performance and mechanism

The release of antibiotics has attracted wide attention due to their abuse and discharge. How to remove these emerging contaminants is an urgent need to be solved. In the present study, sludge-based biochar combining chitosan and iron oxide was prepared via municipal sewage sludge. The novel biochar modified with chitosan and iron oxide exhibited satisfying performance in eliminating antibiotics from water. The application of modified biochar combined with activated persulfate (PS) showed a remarkable removal efficiency of 96.98% for tetracycline (TC). Analysis of the surface characteristics of the modified biochar showed the presence of structural defects, dispersed iron oxides, abundant functional groups, a porous structure, and a relatively stable crystal structure. These characteristics attributed significant importance to facilitating the degradation of TC. A series of experimental conditions including preparation temperature (600-900 ℃), reaction temperature (15-45 ℃), contaminant concentration (30-180 mg/L), adsorbent usage (0.1-1 g/L), pH (2-10), and persulfate addition concentration (1-5 mmol) were conducted. The results revealed that the highest removal efficiency was achieved at 96.98% under the conditions of TC concentration at 30 mg/L, reaction temperature at 35 ℃, pH of 4, adsorbent addition amount of 0.6 g/L, and PS concentration of 2 mmol, respectively. Three degradation pathways and seven intermediate products of TC were proposed. Therefore, our study provides a promising approach for developing effective removal of antibiotic pollutants.

Theoretical insights into the uptake of sulfonamides onto phospholipid bilayers: Mechanisms, interaction and toxicity evaluation

Sulfonamides (SAs) are now recognized as the main emerging environmental pollutants in aquatic environments. Although the bioaccumulation capacities of SAs have been confirmed, the pathway for the penetration of the SAs into lipid bilayer has been not fully understood. In this study, the bioaccumulation mechanism of four typical SAs onto the dipalmitoyl phosphatidylcholine (DPPC) lipid bilayer and their effects on the properties of DPPC bilayer were employed and evaluated respectively by using molecular dynamics simulations. Results show that from the viewpoint of thermodynamics, it is favorable for these SAs partitioning to DPPC bilayer. The accommodation of four SAs onto the lipid membrane needs to undergo several processes, which include the contact stage, transformation stage, and absorption stage. Besides, the sulfamethoxazole (SMX) and sulfamethazine (SMZ) show a strong preference for the DPPC phase rather than the interface region while the sulfadiazine (SDZ) and sulfametoxydiazine (SMD) have similar tendencies in the interface region and DPPC phase. Furthermore, the cytotoxicity of SAs is reflected in their ability to affect the electrostatic potential of the membrane and to reduce the thickness of phospholipid bilayers. This molecular-level study provided an insightful understanding of the toxicity and bioaccumulation of SAs.

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

Recent Advancements in Cyclodextrin-Based Adsorbents for the Removal of Hazardous Pollutants from Waters

Water is an essential substance for the survival on Earth of all living organisms. However, population growth has disturbed the natural phenomenon of living, due to industrial growth to meet ever expanding demands, and, hence, an exponential increase in environmental pollution has been reported in the last few decades. Moreover, water pollution has drawn major attention for its adverse effects on human health and the ecosystem. Various techniques have been used to treat wastewater, including biofiltration, activated sludge, membrane filtration, active oxidation process and adsorption. Among the mentioned, the last method is becoming very popular. Moreover, among the sorbents, those based on cyclodextrin have gained worldwide attention due to their excellent properties. This review article overviewed recent contributions related to the synthesis of Cyclodextrin (CD)-based adsorbents to treat wastewater, and their applications, especially for the removal of heavy metals, dyes, and organic pollutants (pharmaceuticals and endocrine disruptor chemicals). Furthermore, new adsorption trends and trials related to CD-based materials are also discussed regarding their regenerative potential. Finally, this review could be an inspiration for new research and could also anticipate future directions and challenges associated with CD-based adsorbents.

Evaluation of 2-hydroxyethyl methacrylate as COMONOMER in the preparation of water-compatible molecularly imprinted polymers for triazinic herbicides

In this work, the preparation and evaluation of water‐compatible molecularly imprinted polymers for triazines using 2‐hydroxyethyl methacrylate and methacrylic acid as comonomers is described. Four sets of molecularly imprinted and non‐imprinted polymers for propazine were prepared at varying monomer molar ratios (from 4:0 to 1:3), and evaluated for the recognition of several triazines directly in aqueous media. The evaluation was performed by loading 1 mL of an aqueous solution containing 500 ng of each selected triazine, washing with 500 μL of acetonitrile, and eluting with 500 μL of methanol followed by 2 × 500 μL of a solution of methanol containing 10% of acetic acid. Final determinations were performed by high‐performance liquid chromatography‐ultraviolet detection. Improvement in molecular recognition of triazines in water was obtained on those molecularly imprinted polymers incorporating 2‐hydroxyethyl methacrylate in 3:1 or 2:2 molar ratios, being the former selected as optimum providing recoveries for propazine up to 80%. A molecularly imprinted solid‐phase extraction protocol was developed to ensure that triazines‐selective recognition takes place inside selective binding sites in pure water media. Finally, the developed method was successfully applied to the determination of the selected triazines in environmental waters providing limits of detection from 0.16 and the 0.5 μg/L concentration range.

Two-step pyrolysis biochar derived from agro-waste for antibiotics removal: Mechanisms and stability

This study used acetone washing biochar (BCA) and nitric-acid washing biochar (BCN) derived from bagasse to remove sulfamethoxazole (SMX) and tetracycline (TC) in water. Higher specific surface area (1119.53 m² g^-1) and graphitization degree can significantly improve decontamination efficacy, of which BCN has the highest SMX and TC sorption capacities (274.63 mg g^-1 and 353.85 mg g^-1). The kinetics, isotherms and characterization analysis indicated O-containing functional group complexation and π-π interaction were dominant mechanisms in the adsorption process. Adsorption stability experiment showed that BCA has better stability with the coexistence of anions and cations. Besides, the enhancement and competitive adsorption from the interaction between soluble organic matter and TC could facilitate TC decontamination. Therefore, bagasse biochar derived from agro-waste has a promising potential for antibiotic contaminants removal from multi-interference conditions and promotes the recycling of waste, thereby achieving harmony between materials and the ecological environment.

Phosphate-crosslinked β-cyclodextrin polymer for highly efficient removal of Pb(ii) from acidic wastewater

Novel phosphate-crosslinked β-cyclodextrin polymer was synthesized for highly efficient Pb(ii) removal from acidic wastewater.

A review on remediation technologies using functionalized Cyclodextrin

Modern lifestyle and alleviated anthropogenic activities have increased the pollutant load, ultimately causing stress on the environment. In industrialization, many harmful compounds are released into the environment polluting air, water, and soil, triggering adverse impacts on the ecosystem and human beings. Therefore, the development of advanced remediation technologies turns out as a significant environmental priority. Less polar cyclic oligosaccharide Cyclodextrin (CD) with cavity binding organic compounds attracted attention by helping effectively as environmental application. The formation of inclusion complexes and modified Cyclodextrin by cross-linking or surface modification enhances their capacity to abate pollutant effectively from the environment. Modification results in the formation of several novel materials such as CD-based composites, nanocomposites, crosslinked polymer or hydrogels, potent cross-linkers, CD-based membranes, and CD immobilized supports. Several environmental remediation technologies based on Cyclodextrin and modified Cyclodextrin have been discussed in detail in this review. Various environmental applications of Cyclodextrin and its derivatives have been discussed, along with their formation, properties, and characterization. Effective removal of organic pollutants, inorganic pollutants, micropollutants, volatile compounds etc., has been explained using several remediation technologies. Based on CD innocuity, this is referred to as the green process. The reversible equilibrium corresponded by the inclusion phenomenon sets a significant trend in the field of CD environmental application to develop techniques by incorporating supramolecular chemistry as well as irreversible methods such as biodegradation and advanced oxidation. It helps in the complete removal of pollutants and ultimately recycling the CD.

Mesoporous Networks of N-Vinylpyrrolidone with (di)Methacrylates as Precursors of Ecological Molecular Imprinted Polymers

Mesoporous polymer networks were prepared via the cross-linking radical copolymerization of non-toxic hydrophilic N-vinylpyrrolidone (VP) with triethylene glycol dimethacrylate (TEGDM) and poly(ethylene glycol) methyl ester methacrylate (PEGMMA) in bulk, using appropriate soluble and thermodynamically compatible macromolecular additives with a branched structure as porogens. The branched copolymers of various monomer compositions were obtained by radical copolymerization in toluene, controlled by 1-decanethiol, and these materials were characterized by a wide set of physical chemical methods. The specific surface areas and surface morphology of the polymer networks were determined by nitrogen low-temperature adsorption or Rose Bengal (RB) sorption, depending on the copolymer compositions and scanning electron microscopy. The electrochemical properties of RB before and after its encapsulation into a branched VP copolymer were studied on a glassy carbon electrode and the interaction between these substances was observed. Quantum chemical modeling of RB-VP or RB-copolymer complexes has been carried out and sufficiently strong hydrogen bonds were found in these systems. The experimental and modeling data demonstrate the high potency of such mesoporous polymer networks as precursors of molecularly imprinted polymers for the recognition of fluorescent dyes as nanomarkers for biomedical practice.

Tailored functional materials as robust candidates to mitigate pesticides in aqueous matrices-a review

Pesticides are among the top-priority contaminants, which significantly contribute to environmental deterioration. Conventional techniques are not efficient enough to remove pollutants from environmental matrices. The development of functional materials has emerged as promising candidates to remove and degrade pesticides and related hazardous compounds. Furthermore, the nanohybrid materials with unique structural and functional characteristics, such as better material anchorage, mass transfer, electron-hole separation, and charged interaction make them a versatile option to treat and reduce pollutants from aqueous matrices. Herein, we present the current progress in the development of functional materials for the abatement of toxic pesticides. The physicochemical characteristics and pesticide-removal functionalities of various metallic functional materials (e.g., zirconium, zinc, titanium, tungsten, and iron), polymer, and carbon-based materials are critically discussed with suitable examples. Finally, the industrial-scale applications of the functional materials, concluding remarks, and future directions in this important arena are given.

Comparison and recent progress of molecular imprinting technology and dummy template molecular imprinting technology

Molecular imprinting technology for the preparation of polymers with specific molecular recognition function had become one of the current research hotspots. It has been widely applied in chromatographic separation, antibody and receptor mimetics, solid-phase extraction, bio-sensors, and other fields in the last decades. In this study, molecular imprinting technology was summarized from the points of templates and dummy templates, and four typical target analytes were selected to compare the differences between templates and dummy templates. The current status and prospects of molecular imprinting technology were also proposed.

Surface molecular imprinting on polystyrene resin for selective adsorption of 4-hydroxybenzoic acid

Using chloromethylated polystyrene resin, N,N-diethylaminoethyl methacrylate, and ethylene glycol dimethacrylate as support, functional monomer and cross-linker, respectively, the molecularly imprinted resin (MIR) and non-imprinted resin (NIR) were fabricated by the combination of atom transfer radical polymerization and surface imprinting technique for the selective adsorption of 4-hydroxybenzoic acid (4-HB) from aqueous solutions. The prepared adsorbents were characterized by N₂ adsorption/desorption isotherms, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The adsorption processes of the 4-HB with MIR and NIR followed pseudo-second-order kinetics, and the adsorption isotherms were appreciably described by the Langmuir model. Furthermore, the adsorption efficiencies of MIR and NIR for different compounds in single and binary solutions proved that MIR exhibited high adsorption capacity and favorable selectivity toward 4-HB over other structurally related organic compounds (i.e., benzoic acid, 2-hydroxybenzoic acid, 3-hydroxybenzoic acid, phenol, and 2-hydroxynaphthalene). In addition, MIR could effectively remove 4-HB from a simulated effluent in a dynamic adsorption experiment. This study illustrates in-depth perspectives on the adsorption mechanisms of 4-HB onto MIR; interactions between the adsorbate and adsorbent were proposed based on the adsorption behaviours and instrumental analyses. The resulting MIR is a promising material for the interference-free adsorbent in the selective adsorption of 4-HB from mixed solutions.

Recent Advances of Molecularly Imprinted Polymers Based on Cyclodextrin

Molecular imprinting polymers (MIPs), generally considered as artificial mimics that are comparable to natural receptor, are polymers with tailor-made specific recognition sites complementary to the template molecules in shape and size. As a class of supramolecular compounds, cyclodextrins (CDs) are flourishing in the field of molecular imprinting with their unique structural properties. This review presents recent advances in application of MIPs based on CDs during the past five years. The discussion is grouped according to the different role of CDs in MIPs, that is, functional monomer, carrier modifier, etc. Main focus is the application of CD-based MIP on sample preparation, detection, and sensing. Additionally, drug delivery with CD-based MIP is also briefly discussed. Finally, challenges and future prospects of application of CDs in MIP are elaborated.

Construction of natural polymeric imprinted materials and their applications in water treatment: A review

Molecularly imprinted materials (MIMs) have been widely used in various fields, including water treatment, chemical sensing, and biotechnology, because of their specific recognition and high selectivity. MIMs are usually obtained via two successive steps, namely, (1) copolymerization and crosslinking reactions of the preassembled complex of comonomers and a specific target compound (2) and thorough removal of template molecules. Some functional polymers are directly used as supporting materials and functional groups assembled with target compound are provided to simplify the preparation of MIMs. Natural polymers, such as chitosan, cyclodextrin, sodium alginate, starch, cellulose, lignin and their derivatives, are good candidates because of their environmentally friendly properties, low costs, and abundant active functional groups. In this study, different methods for the preparation of natural polymeric MIMs were reviewed in terms of the construction of microscopic binding cavities and macroscopic visible condensed structures with different shapes. Natural polymeric MIMs in water treatment applications, such as adsorption and detection of various pollutants from aqueous solutions, were summarized. Prospects on the development of novel and high-performance natural polymeric MIMs were discussed to overcome the difficulties in their preparation and applications.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

Synergistic removal of copper and tetracycline from aqueous solution by steam-activated bamboo-derived biochar

Steam-activated biochar (SBC) was prepared and showed excellent performance for synergistic removal of Cu²⁺ and tetracycline (TC). The adsorption capacity of SBC and mutual effect of TC and Cu²⁺ were investigated via single and binary system and the adsorption isotherm. The adsorption capacity of TC was significantly enhanced when it coexisted with Cu²⁺. Likewise, increased amounts of Cu²⁺ were adsorbed in the presence of TC. The presence of NaCl exerted a negative influence on the adsorption of Cu²⁺, while the inhibitory effect of salinity on TC was neutralized by bridge enhancement in the binary system. Bridge enhancement and site competition were involved in the synergistic removal of TC and Cu²⁺. Considering the stable application in simulated and real water samples, SBC showed great potential for synergistic removal of antibiotics and heavy metals.

Novel cyclodextrin-based adsorbents for removing pollutants from wastewater: A critical review

Over the past few decades, cyclodextrin-based adsorbents have drawn worldwide attention as new-generation adsorbents for wastewater treatment due to its extraordinary physicochemical properties. This review outlined the recent development in the synthesis of cyclodextrin-based adsorbents as well as highlighted their applications in the removal of heavy metals, dyes, endocrine disrupting chemicals (EDCs), and mixed pollutants from water. The cross-linked and immobilized cyclodextrin-based adsorbents exhibited excellent adsorption performances. The removal of dyes and heavy metals were effectively controlled by ion exchanging, mainly depending upon the pH; while the adsorptions of EDCs always occurred in cyclodextrin cavities and pH-independent. An easier separation process between aqueous and adsorbents could be achieved compared to native cyclodextrin, which promoted the application of cyclodextrin-based adsorbents in practical industry. This review could provide an inspiration for the advanced study in the development of cyclodextrin-based adsorbents for high efficiency wastewater treatment.

Adsorptive removal of endocrine disrupting compounds from aqueous solutions using magnetic multi-wall carbon nanotubes modified with chitosan biopolymer based on response surface methodology: Functionalization, kinetics, and isotherms studies

Recently, the presence of endocrine disrupting compounds in the environment has emerged as a global and ubiquitous problem. In this study, a novel synthesis of magnetically carbon nanotube modified with biological polymeric was successfully prepared. The effect of different parameters on the Bisphenol A (BPA) adsorption was studied. A prediction model for BPA adsorption was extended based on the Central Composite Design. Also, the prepared biopolymeric nanotubes were characterized by FT-IR, XRD, TEM, FE-SEM. The surface morphology of nanocomposite was observed, increased carbon nano tube size, and the levels after surface deposition were completely covered by chitosan proteins. The results of our experiments showed that optimum adsorption conditions was achieved at t = 76 min, BPA concentration 6.5 mg/L, adsorbent dosage 1 g/L and pH = 6.2.The data obtained in this study followed the Langmuir isotherm model and the pseudo-second order model. The maximum monolayer adsorption capacity of nanocomposite for BPA was 46.2 mg/g at 20 °C. This study showed that the adsorption of BPA onto nanocomposite was spontaneous and thermodynamically desirable.

Adsorptive removal of bisphenol A from aqueous solutions using phosphonated levan

In this study, the potential use of phosphonated Halomonas Levan (PhHL) as a natural and cost effective adsorbent for Bisphenol A (BPA), was systematically investigated via the study of the adsorption equilibrium, kinetics, and reuse potential as well as the interpretation of adsorption mechanism. The effects of pH and temperature on the adsorption were also evaluated. The maximum amount of BPA adsorbed on the unit weight of PhHL was determined as 104.8 (∓5.02) mg/g (at 298 K) and the maximum adsorption capacity was calculated as 126.6 mg/g by Sips model. FTIR and XPS studies were conducted to elucidate the adsorption mechanism. Based on the obtained results OH-pi and CH-pi interactions were found to be effective in the adsorption mechanism. The reuse ability was studied with three cycles of adsorption-desorption, and the results showed that the BPA adsorbed per gram of the PhHL decreased 28.6% after the third cycle. This study has shown that PhHL can be used as an effective adsorbent for the removal of BPA from aqueous solutions. The obtained results may be useful in the development of PhHL based adsorption systems for the removal of EDCs with similar chemical properties to BPA.

Decontamination of lead and tetracycline from aqueous solution by a promising carbonaceous nanocomposite: Interaction and mechanisms insight

Innovative carbonaceous nano-chlorapatites (CNClAPs) which originated from the pyrolyzation of the mixture of bamboo residues and chlorapatites varying from 400 °C to 600 °C were used to investigate the decontamination efficacy of lead (Pb²⁺) and tetracycline (TC) from wastewater. Rising pyrolytic temperature can highly improve the decontamination efficacy, of which CNClAP600 exhibited the most remarkable effects for Pb²⁺ and TC decontamination (90.37% for Pb²⁺ and 86.58% for TC at pH = 7). The kinetic, isotherm and characterization analysis demonstrated that the inner mechanisms for the decontamination of Pb²⁺ and TC involved precipitation, electrostatic interaction, hydrogen bonding, π-π interaction and pore filling. Experiment indicated that the enhancement and competitive adsorption resulted from the interaction between Pb²⁺ and TC could facilitate their joint decontamination under low concentrations. This research shed light on the management of coexisting heavy metals and organic matters contamination in wastewater by CNClAPs under different temperatures.

Comparative adsorption of emerging contaminants in water by functional designed magnetic poly(N-isopropylacrylamide)/chitosan hydrogels

The magnetic poly(N-isopropylacrylamide)/chitosan hydrogel with interpenetrating network (IPN) structure was designed based on the functional groups of targeted emerging contaminants, represented by hydrophilic sulfamethoxazole (SMZ) and hydrophobic bisphenol A (BPA). The average particle size, specific surface area, and total pore volume of the hydrogel were turned out to be 103.7 μm, 60.70 m²/g and 0.0672 cm³/g, respectively. Adsorption results indicated that the maximum adsorption capacity occurred at the pH where SMZ was anionic and BPA was uncharged. When the adsorption temperature increased from 25 °C to 35 °C, the amount of adsorbed SMZ hardly changed, but that of BPA increased by two times. The adsorption capacity of the binary system (i.e., with both SMZ and BPA) was almost the same as that of the single system, indicating that simultaneous adsorption of SMZ and BPA was achieved. The adsorption equilibrium was reached quickly (within 5 min) for both SMZ and BPA. For adsorption isotherm, the Freundlich model fitted well for SMZ at 25, 35 and 45 °C. However, the adsorption of BPA exhibited the sigmoidally shaped isotherm at 25 °C with the Slips model fitting well, and both the Freundlich isotherm and the Slips isotherm fitted the data well at 35 °C and 45 °C, suggesting that the adsorption force was initially weak but greatly enhanced with an increase in adsorbate concentration or ambient temperature. The main adsorption mechanism was inferred to be electrostatic interactions for SMZ, and hydrophobic interactions as well as hydrogen bonding for BPA. The hydrogel adsorbent maintained favorable adsorption capacity for BPA after five adsorption-desorption cycles. These findings may provide a strategy for designing high performance adsorbents that can remove both hydrophilic and hydrophobic organic contaminants in the aquatic environment.

Graphene Oxide Based Magnetic Nanocomposites with Polymers as Effective Bisphenol-A Nanoadsorbents

Magnetic graphene oxide was impregnated with polymers for the preparation of nanocomposite adsorbents to be examined for the adsorptive removal of a typical endocrine disruptor, bisphenol–A (BPA) from aqueous solutions. The polymers used were polystyrene, chitosan and polyaniline. The nanocomposites prepared were characterized for their structure, morphology and surface chemistry. The nanocomposites presented an increase adsorptive activity for BPA at ambient conditions, compared to pure magnetic oxide, attributed to the synergistic effect of the polymers and the magnetic graphene oxide. The increased adsorption of BPA exhibited by the nanocomposites with chitosan and polyaniline could be attributed to the contribution of amine groups.

Peroxidase-Like Activity of Smart Nanomaterials and Their Advanced Application in Colorimetric Glucose Biosensors

Diabetes is a dominating health issue with 425 million people suffering from the disease worldwide and 4 million deaths each year. To avoid further complications, the diabetic patient blood glucose level should be strictly monitored despite there being no cure for diabetes. Colorimetric biosensing has attracted significant attention because of its low cost, simplicity, and practicality. Recently, some nanomaterials have been found that possess unexpected peroxidase-like activity, and great advances have been made in fabricating colorimetric glucose biosensors based on the peroxidase-like activity of these nanomaterials using glucose oxidase. Compared with natural horseradish peroxidase, the nanomaterials exhibit flexibility in structure design and composition, and have easy separation and storage, high stability, simple preparation, and tunable catalytic activity. To highlight the significant progress in the field of nanomaterial-based peroxidase-like activity, this work discusses the various smart nanomaterials that mimic horseradish peroxidase and its mechanism and development history, and the applications in colorimetric glucose biosensors. Different approaches for tunable peroxidase-like activity of nanomaterials are summarized, such as size, morphology, and shape; surface modification and coating; and metal doping and alloy. Finally, the conclusion and challenges facing peroxidase-like activity of nanomaterials and future directions are discussed.

Two different states conversion mechanism of the imprinting sites

Bisphenol A molecular imprinted adsorbent (BMIA) was successfully synthesized by a sol-gel process and showed a good specific binding performance in the water. The further studies showed that the mass transfer process was controlled by in-diffusion, and the synthesis conditions would effect on the amount of imprinting sites. Scatchard model analysis evidenced that the high binding affinity sites and the low binding affinity sites were both on BMIA, and the high binding affinity sites played a key role in the specific binding process. Scatchard model analysis of temperature effect experiments and dosage effect experiments proved that the specific binding sites with high binding affinity and the unexpressed specific binding sites with low binding affinity were the two different states of the imprinting binding sites. The conversion between the two different states depended on the reaction driving force, and the increasing reaction driving force would increase the number of specific binding sites. Especially, the temperature showed a linear positive correlation with the amount of specific binding sites. Finally, a possible model was put forward to explain the two different states conversion mechanism of the imprinting sites.

Recent advances in covalent organic frameworks (COFs) as a smart sensing material

Recent advances in covalent organic frameworks (COFs) as a smart sensing material are summarized and highlighted.

Removal Effect of Atrazine in Co-Solution with Bisphenol A or Humic Acid by Different Activated Carbons

Activated carbons (ACs) based on apricot shells (AS), wood (W), and walnut shells (WS) were applied to adsorb atrazine in co-solutions. To study the effect of Bisphenol A (BPA) on the adsorption behavior of atrazine, the adsorption performance of ACs for BPA in single solution was studied. The results demonstrated that the adsorption kinetics of BPA fitted the pseudo-second-order model, the adsorption isotherms of BPA followed the Langmuir model. Meanwhile, the adsorption kinetics of atrazine fitted the pseudo-second-order kinetics model and the isotherm was consistent with the Freundlich model both in single solution and co-solution. In addition, competitive adsorption was observed when atrazine coexisted with BPA or humic acid. For the adsorption capacity, the adsorption amount of ASAC, WAC, and WSAC for atrazine obviously decreased by 18.0%, 30.0%, and 30.3% in the presence of BPA, respectively, which was due to the π−π interactions, hydrophobic interactions, and H-bonds, resulting in the competitive adsorption between atrazine and BPA. This study contributes to the further understanding of the adsorption behavior for atrazine in co-solution.

Preparation of water-compatible molecularly imprinted thiol-functionalized activated titanium dioxide: Selective adsorption and efficient photodegradation of 2, 4-dinitrophenol in aqueous solution

A novel water-compatible surface molecularly imprinted thiol-functionalized titanium dioxide (TiO₂) material (CMIP-coated TiO₂) was prepared in water, using 2, 4-dinitrophenol (2, 4-DNP) as template molecule and o-phenylenediamine (OPDA) as both functional monomer and cross-linker. The as-synthesized materials were characterized by FESEM, FTIR, XRD, BET and UV-vis DRS. Moreover, we have investigated the adsorption capacity, adsorption selectivity and photodegradation activity of the CMIP-coated TiO₂ and non-molecular imprinted materials (CNIP-coated TiO₂). Additionally, the effects of pH and concentration of 2, 4-DNP on the degradation rate of 2, 4-DNP were also investigated. Results showed that CMIP-coated TiO₂ exhibited higher adsorption capacity, greater selectivity and faster photodegradation activity for 2, 4-DNP compared with the CNIP-coated TiO₂. Meanwhile, the specific selectivity to 2, 4-DNP over its structural analogue 4-nitrophenol (4-NP) and the enhanced photodegradation capacity were mainly attributed to the imprinted cavities on the surface of CMIP-coated TiO₂. Taking advantage of efficient removal capacity, high reusability and no-additional chemicals in imprinted process, the prepared materials can be potentially applied to "green" removal of 2, 4-DNP in wastewater.