Degradation of methylene blue by a heterogeneous Fenton reaction using an octahedron-like, high-graphitization, carbon-doped Fe2O3 catalyst

MnCe-based catalysts for removal of organic pollutants in urban wastewater by advanced oxidation processes - A critical review

With Advanced oxidation processes (AOPs) widely promoted, MnCe-based catalysts have received extensive attention under the advantages of high efficiency, stability and economy for refractory organic pollutants present in urban wastewater. Driven by multiple factors such as environmental pollution, technological development, and policy promotion, a systematic review of MnCe-based catalysts is urgently needed in the current research situation. This research provides a critical review of MnCe-based catalysts for removal of organic pollutants in urban wastewater by AOPs. It is found that co-precipitation and sol-gel methods are more appropriate methods for catalyst preparation. Among a host of influence factors, catalyst composition and pH are crucial in the catalytic oxidation processes. The synergistic effect of the free radical pathway and surface catalysis results in better pollutants degradation. It is more valuable to utilize multiple systems for oxidation (e.g., photo-Fenton technology) to improve the catalytic efficiency. This review provides theoretical guidance for MnCe-based catalysts and offers a reference direction for future research in the AOPs of organic pollutants removal from urban wastewater.

Synthesis of Biogenic Hematite Nanocubes as Recyclable Dark Fenton-like Catalysts at Neutral pH and Plant Growth Applications of Degraded Waste Water

The goal of this study is to fabricate bioinspired metal oxide nanocubes from lemon peel extract in an environmentally friendly manner and evaluate its impact on environmental remediation. In neutral pH, the degradation kinetics of methylene blue dye (MB) in the aqueous phase was investigated using iron oxide nanoparticles as a catalyst. The obtained results revealed that under optimum conditions, synthesized Fe2O3 nanoparticles (IONPs) offered ultrafast dark Fenton-like reaction to degrade MB. The size, morphological structures, and stability were confirmed through dynamic light scattering, field emission scanning electron microscopy, X-ray diffraction, and ζ potential analysis. The overall environmental impact of the process was assessed by growing wheat plants with treated wastewater and evaluating their biochemical attributes. Antibacterial activity was investigated against Gram-positive (Bacillus megaterium, Bacillus subtilis) and Gram-negative (Escherichia coli, Salmonella typhimurium) aerobics and Gram-positive cocci (Staphylococcus aureus). The antifungal activity was measured against Fusarium solani by spore germination inhibition and zone inhibition of fungal pathogens for different nanocube concentrations.

A low-cost and eco-friendly powder catalyst: Iron and copper nanoparticles supported on biochar/geopolymer for activating potassium peroxymonosulfate to degrade naphthalene in water and soil

A low-cost and environment-friendly biochar/geopolymer composite loaded with Fe and Cu nanoparticles (Fe-Cu@BC-GM) was prepared by impregnation-calcination using lignin and kaolin as precursors. SEM, FTIR and XRD analysis suggested that the Fe-Cu@BC-GM had a certain pore structure, rich functional groups and stable crystal structure. The obtained Fe-Cu@BC-GM was used as the catalyst of potassium peroxymonosulfate (PMS) for remediation of wastewater and soil polluted by naphthalene (NAP). Experimental results indicated that Fe-Cu@BC-GM exhibited outstanding catalytic performance, and the maximum degradation rate of NAP in water and soil reached 98.35% and 67.98% within 120 min, respectively. The XPS measurement confirmed the presence of successive Fe (Ⅲ)/Fe (Ⅱ) and Cu(Ⅱ)/Cu(Ⅰ) redox pairs cycles on the surface of Fe-Cu@BC-GM, which made Fe (Ⅲ) and Cu(Ⅰ) continuously generated Fe (Ⅱ) activating PMS to produce SO₄^·- and ·OH for the degradation of NAP. The effects of Fe-Cu@BC-GM/PMS system on plant toxicity were evaluated by analyzing the degradation intermediates and bioassay of mung bean. It was proved that the Fe-Cu@BC-GM/PMS system could degrade NAP into less toxic intermediates, and the seed germination rate, root and stem length of mung bean after soil remediation were not notably different from those of the uncontaminated soil. This work opened new prospect for the application of geopolymer in degradation of persistent organic pollutants (POPs) and provided a cost-effective option for the remediation of the persistent organic pollutants contaminated water and soil.

Ferrous-Oxalate-Modified Aramid Nanofibers Heterogeneous Fenton Catalyst for Methylene Blue Degradation

The heterogeneous Fenton system has drawn great attention in recent years due to its effective degradation of polluted water capability without limitation of the pH range and avoiding excess ferric hydroxide sludge. Therefore, simple chemical precipitation and vacuum filtration method for manufacturing the heterogeneous Fenton aramid nanofibers (ANFs)/ferrous oxalate (FeC₂O₄) composite membrane catalysts with excellent degradation of methylene blue (MB) is reported in the study. The morphology and structure of materials synthesized were characterized by scanning electron microscope (SEM), X-ray energy spectrum analysis (EDS), infrared spectrometer (FTIR), and X-ray diffraction (XRD) equipment. The 10 ppm MB degradation efficiency of composite catalyst and ferrous oxalate (FeC₂O₄) within 15 min were 94.5% and 91.6%, respectively. The content of methylene blue was measured by a UV-Vis spectrophotometer. Moreover, the dye degradation efficiency still could achieve 92% after five cycles, indicating the composite catalyst with excellent chemical stability and reusability. Simultaneously, the composite catalyst membrane can degrade not only MB but also rhodamine B (RB), orange II (O II), and methyl orange (MO). This study represents a new avenue for the fabrication of heterogeneous Fenton catalysts and will contribute to dye wastewater purification, especially in the degradation of methylene blue.

Fe-Immobilised Catechol-Based Hypercrosslinked Polymer as Heterogeneous Fenton Catalyst for Degradation of Methylene Blue in Water

Clean water is one of the sustainable development goals. Organic dye is one of the water pollutants affecting water quality. Hence, the conversion of dyes to safer species is crucial for water treatment. The Fenton reaction using Fe as a catalyst is a promising process. However, homogeneous catalysts are normally sensitive, difficult to separate, and burdensome to reuse. Therefore, a catechol-based hypercrosslinked polymer (catechol-HCP) was developed as an inexpensive solid support for Fe (catechol-HCP-Fe) and applied as a heterogenous Fenton catalyst. The good interaction of the catechol moiety with Fe, as well as the porous structure, simple preparation, low cost, and high stability of catechol-HCP, make it beneficial for Fe-loading in the polymer and Fenton reaction utilisation. The catechol-HCP-Fe demonstrated good catalytic activity for methylene blue (MB) degradation in a neutral pH. Complete decolouration of 100 ppm MB could be observed within 25 min. The rate of reaction was influenced by H₂O₂ concentration, polymer dose, MB concentration, pH, and temperature. The catechol-HCP-Fe could be reused for at least four cycles. The dominant reactive species of the reaction was considered to be singlet oxygen (¹O₂), and the plausible mechanism of the reaction was proposed.

Room-temperature preparation of highly efficient NH2-MIL-101(Fe) catalyst: The important role of -NH2 in accelerating Fe(III)/Fe(II) cycling

The slow redox rate of Fe(III)/Fe(II) couples is a rate-limiting step for Fenton-like performance of Fe-MOFs. In this study, a series of catalysts (MIL-101) with various p-phthalic acid/2-aminoterephthalic acid (H₂BDC/NH₂-H₂BDC) molar ratios were prepared using a simple and mild chemical method and applied for catalyzed degradation of bisphenol A (BPA). Interestingly, the -NH₂ modified MIL-101(Fe) can adjust Fe-Oxo node by increasing the electron density of Fe(III) in the presence of -NH₂ group with high electron density, thus forming Fe(II) in situ in MOFs. Meanwhile, the -NH₂ groups used as electron-donors can promote electron transfer, resulting in faster Fe(III)→Fe(II) half-reaction and active H₂O₂ to continuously generate •OH radical. The BPA degradation and rate constant of Fe-BDC-NH₂/H₂O₂ system are 15.4-fold and 86.8-fold higher than that of Fe-BDC/H₂O₂ system, respectively. The density functional theory (DFT) calculations showed that Fe-BDC-NH₂ possesses higher Fermi level energy (-4.88 eV) and lower activation energy barriers (0.32 eV) compared with Fe-BDC. Moreover, Fe-BDC-NH₂ showed good reusability and stability. This work offers a highly efficient and stable MOFs-based Fenton-like catalyst to rapidly degrade organic pollutants over a wide pH range for potential applications in wastewater treatment.

Green synthesis of MIL-100(Fe) derivatives and revealing their structure-activity relationship for 2,4-dichlorophenol photodegradation

MIL-100(Fe), a kind of iron-based metal-organic framework materials (MOFs), can be synthesized at room temperature or hydrothermal conditions, which are promising precursor materials for preparing photocatalysts to degrade some recalcitrant chlorophenols in industrial wastewater. However, the relationship between the structural characterization of MIL-100(Fe) derivatives and their photodegradation behavior of chlorophenol pollutants is still unclear. Thus, in this work, a porous Z-scheme α-Fe₂O₃/MIL-100(Fe) composite was successfully fabricated via partial-pyrolysis of MIL-100(Fe) precursor synthesized through green synthesis route, which was further used for degrading high-concentration of 2,4-dichlorophenol under visible-light illumination (λ > 420 nm). The effects of synthesis route and pyrolysis temperature of MIL-100(Fe) on the degradation efficiencies of as-derived materials for 2,4-dichlorophenol were investigated. The structure-activity relationship was illuminated in detail. Otherwise, the influence of several process factors, i.e., initial concentration and pH of the 2,4-dichlorophenol solution, catalyst dosage on the degradation efficiency of 2,4-dichlorophenol has also been performed. The removal efficiency of 2,4-dichlorophenol with the initial concentration of 100 mg L^-1 reached up to 87.65% under optimized conditions. Lastly, the possible mechanism was explored based on trapping experiments and some other characterization results. The study in this paper not only exhibited new insight into the modified α-Fe₂O₃ material with high photocatalytic activity but also provided a promising method for treating wastewater containing 2,4-dichlorophenol or other similar organic pollutants.

Reutilization of Fe-containing tailings ore enriched by iron(iii) chloride as a heterogeneous Fenton catalyst for decolorization of organic dyes

In this study, the Fe-containing tailings (Fe-TO) ore was reutilized and enriched with FeCl3 as a heterogeneous catalyst for the Fenton process to degrade the organic dyes from aqueous solution. The determinants of the heterogeneous catalytic Fenton system which included iron modification ratio, solution pH, catalyst dosage, H2O2 dosage and initial concentration of organic dyes were systematically investigated. The modification ratio of 15% (w/w of iron), pH of 3, MFe-TO15 dosage of 0.5 g L-1 and H2O2 dosage of 840 mg L-1 were chosen as the best operational conditions for Fenton oxidation of organic dyes. The decolorization efficiency of both MB and RhB by MFe-TO15/H2O2 was higher than that of Fe-TO/H2O2 by about two times. The kinetic study showed the degradation of organic dyes well fitted the pseudo-first-order kinetic model with apparent constant rate values (K d) following the same sequence as the degradation efficiency of organic dyes. The degradation mechanism of dyes could be attributed to adsorption due to the good-development in textural properties of the iron modified catalyst (MFe-TO) with an increase in BET surface area, pore volume and pore diameter of, respectively, 2, 5 and 5 times and leaching iron through homogeneous Fenton reaction. However, the oxidation process occurring on the MFe-TO15's surface by heterogeneous Fenton reaction which enhanced decomposition of H2O2 for continuous generation of hydroxyl radicals was the main mechanism. The key role of *OH radical in oxidation of organic dyes was further ascertained by the remarkable drop in the decolorization of both organic dyes when the various radical-scavengers, including tert-butanol and chloride were supplemented into Fenton systems. A good stability of the catalyst was obtained through leaching test with low leaching iron ratio. The applied modified catalyst remained stable through three consecutive runs. From these findings, it can be concluded that the modified material can be applied as a feasible, inexpensive and highly effective catalyst for removal of persistent organic compounds from wastewater.

Iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon as an efficient peroxymonosulfate activator to degrade 1-naphthol

A novel iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon (Fe-N-S-MPC) was proposed by one-pot pyrolysis strategy to activate peroxymonosulfate (PMS) to degrade 1-naphthol using low-cost lignin as precursors. The Fe-N-S-MPC was characterized for structure and properties by different characterizations. The obtained materials had the morphology of iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon with rich functional groups and large specific surface area, which made the materials have a good catalytic property. It was proved that the doping of nitrogen and sulfur is pivotal for improving the catalytic performance. The radical quenching experiment confirmed that sulfate radical (SO₄^-) and hydroxyl radical (OH) are two major reactive oxygen groups. The reaction had phenomenon of the free radicals upsurge in the early stage and the shortage in the later stage. Therefore, a mathematical model was put forward to represent the two-stage reaction kinetics. By adding oxidants in batches, the degradation effect could reach nearly 100% within 30 min. The Fe-N-S-MPC were applied to the degradation of 1-naphthol in soil and showed high degradation performance. This work provided a new type of catalytic material by the high-value utilization of waste for the degradation of organic pollutants.

Ce-based catalysts used in advanced oxidation processes for organic wastewater treatment: A review

Refractory organic pollutants in water threaten human health and environmental safety, and advanced oxidation processes (AOPs) are effective for the degradation of these pollutants. Catalysts play vital role in AOPs, and Ce-based catalysts have exhibited excellent performance. Recently, the development and application of Ce-based catalysts in various AOPs have been reported. Our study conducts the first review in this rapid growing field. This paper clarifies the variety and properties of Ce-based catalysts. Their applications in different AOP systems (catalytic ozonation, photodegradation, Fenton-like reactions, sulfate radical-based AOPs, and catalytic sonochemistry) are discussed. Different Ce-based catalysts suit different reaction systems and produce different active radicals. Finally, future research directions of Ce-based catalysts in AOP systems are suggested.

A Novel Reduced Graphene Oxide-Attapulgite (RGO-ATP) Supported Fe2O3 Catalyst for Heterogeneous Fenton-like Oxidation of Ciprofloxacin: Degradation Mechanism and Pathway

Ciprofloxacin, a third-generation fluoroquinolones (FQs) antibiotic, is observed to increasingly pollute the environment. In this study, a three-dimensional reduced graphene oxide-attapulgite-based catalyst Fe2O3/RGO-ATP was prepared and used to analyze the degradation of ciprofloxacin in a heterogeneous Fenton reaction. The heterogeneous catalyst Fe2O3/RGO-ATP was prepared by a one-step hydrothermal method, and the samples were characterized using BET(Brunauer-Emmett-Teller) surface area, Raman spectroscopy, X-ray diffraction (XRD), Fourier infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The effect of reaction time, temperature, pH, initial concentration, H2O2 dosage and reuse time on the degradation of ciprofloxacin by the catalyst Fe2O3/RGO-ATP was investigated. The optimum conditions of degradation of ciprofloxacin are observed to be 60 °C, pH 5, H2O2 concentration of 2.9724 mmol/L, and initial ciprofloxacin concentration of 50 mg/L. The catalyst could be reused several times with a decline in catalytic capacity. Fourier-transform ion cyclotron resonance mass spectrometer (FT) was also employed to study the degradation products of ciprofloxacin in the aqueous solution. The results show that the heterogeneous catalyst Fe2O3/RGO-ATP possessed an excellent ability for the catalytic degradation of ciprofloxacin. Direct hydroxyl oxidation is noted to be the main pathway of degradation of ciprofloxacin, and no defluorination reaction is observed during the degradation process.

CuO and CeO2 assisted Fe2O3/attapulgite catalyst for heterogeneous Fenton-like oxidation of methylene blue

In this paper, CuO and CeO₂ were screened as co-catalyst components for Fe₂O₃/attapulgite (ATP) catalyst, and three new catalysts (CuO–Fe₂O₃/ATP, CeO₂–Fe₂O₃/ATP and CuO–CeO₂–Fe₂O₃/ATP) were prepared for degradation of methylene blue (MB). The three catalysts' characteristics were determined by BET, XRD, FT-IR, SEM and XPS. MB degradation in different systems and at different pH values was also studied. Under the conditions of H₂O₂ concentration of 4.9 mmol L⁻¹, catalyst dosage of 5 g L⁻¹, pH of 5, reaction temperature of 60 °C and MB initial concentration of 100 mg L⁻¹, the as-synthesized catalysts showed much greater reaction rate and degradation efficiency of MB than Fe₂O₃/ATP catalyst. In addition, the reusability of the as-prepared composites was evaluated. The intermediate products of MB degradation were identified by LC-MS and the possible degradation process of MB was put forward.

A novel heterogeneous catalyst CuO–CeO₂–Fe₂O₃/ATP was synthesized for MB degradation and the catalytic mechanism was put forward.