Photocatalytic process for total arsenic removal using an innovative BiVO4/TiO2/LED system from aqueous solution: Optimization by response surface methodology (RSM)

A heterogeneous peroxymonosulfate catalyst built by Fe-based metal-organic framework for the dye degradation

The regulatory control on dyes is an important issue, as their discharge into the environment can pose significant risks to human health. MIL-101(Fe) prepared by a solvothermal method was used as a catalyst to generate sulfate (SO₄^•-) and hydroxyl (HO^•) radicals from peroxymonosulfate (PMS) for the treatment of orange G (OG). The structural properties of MIL-101(Fe) were assessed by a number of characterization approaches (e.g., Fourier-transform infrared spectroscopy). The factors controlling the removal of OG were explored by a response surface methodology with central composite design (RSM-CCD) plus adaptive neuro-fuzzy inference system (ANFIS). The synthetized MIL-101(Fe) had uniform octahedral nanocrystals with rough surfaces and porous structures. The maximum catalytic removal efficiency of OG with MIL-101(Fe)/PMS process was 74% (the final concentration of Fe²⁺ as 0.19 mg/L and reaction rate of 434.2 μmol/g/h). The catalytic removal of OG could be defined by the non-linear kinetic models based on RSM. The OG removal efficiency declined noticeably with the addition of radical scavengers such as ethanol (EtOH) and tert-butanol (TBA) along with some mineral anions. Accordingly, MIL-101(Fe)/PMS is identified as an effective remediation option for the dyes based on advanced oxidation process (AOPs) based on high treatment efficiency at low dosage of low cost catalyst.

Recent Advances of Photocatalytic Application in Water Treatment: A Review

Photocatalysis holds great promise as an efficient and sustainable oxidation technology for application in wastewater treatment. Rapid progress developing novel materials has propelled photocatalysis to the forefront of sustainable wastewater treatments. This review presents the latest progress on applications of photocatalytic wastewater treatment. Our focus is on strategies for improving performance. Challenges and outlooks in this promising field are also discussed. We hope this review will help researchers design low-cost and high-efficiency photocatalysts for water treatment.

A novel ternary heterogeneous TiO2/BiVO4/NaY-Zeolite nanocomposite for photocatalytic degradation of microcystin-leucine arginine (MC-LR) under visible light

Microcystin-leucine arginine (MC-LR) is a carcinogenic toxin, produced by cyanobacteria. The release of this toxin into drinking water sources can threaten public health and environmental safety. Therefore, effective MC-LR removal from water resources is necessary. In the present study, the hydrothermal method was used to synthesize a novel ternary BiVO₄/TiO₂/NaY-Zeolite (B/T/N-Z) nanocomposite for MC-LR degradation under visible light. FESEM, FTIR, XRD, and DRS were performed for characterizing the nanocomposite structure. Also, the Response Surface Methodology (RSM) was applied to determine the impact of catalyst dosage, pH, and contact time on the MC-LR removal. High-performance liquid chromatography was performed to measure the MC-LR concentration. Based on the results, independent parameters, including contact time, catalyst dosage, and pH, significantly affected the MC-LR removal (P < 0.05). In other words, increasing the contact time, catalyst dosage, and acidic pH had positive effects on MC-LR removal. Among these variables, the catalyst dosage, with the mean square and F-value of 1041.37 and 162.84, respectively, had the greatest effect on the MC-LR removal efficiency. Apart from the interaction between the catalyst dosage and contact time, the interaction effects of other parameters were not significant. Also, the maximum MC-LR removal efficiency was 99.88% under optimal conditions (contact time = 120 min, catalyst dosage = 1 g/L, and pH = 5). According to the results, the B/T/N-Z nanocomposite, as a novel and effective photocatalyst could be used to degrade MC-LR from polluted water.

Experimental data on the removal of acid orange 10 dye from aqueous solutions using TiO2/Na-Y zeolite and BiVO4/Na-Y zeolite nanostructures: A comparison study

The increase of textile factories, along with the continuous development of industrialization has led to excessive discharge of high toxicity wastewater along with a diverse range of contaminants in wastewater. In this regard, to reduce their operating costs and treatment time, in this work, two synthesized nanostructures, TiO₂/Na-Y zeolite and BiVO₄/Na-Y zeolite was compared to remove acid orange 10 (AO10) from the aqueous solutions. The obtained optimum operating conditions including initial dye concentration, initial pH, contact time, catalyst dosage and AO10 removal efficiency were 20 mg/L, 3, 7 min, 0.2 g/100 mL, and 99.77% for TiO₂/Na-Y zeolite and 20 mg/L, 3, 200 min, 0.2 g/100 mL and 46.13% for BiVO₄/Na-Y zeolite composite, respectively. The structural characteristics of the synthetized materials were also determined by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and fourier-transform infrared spectroscopy (FTIR).

Distributed treatment systems

This section presents a review of the scientific literature published in 2019 on topics relating to distributed treatment systems. This review is divided into the following sections: constituent removal, treatment technologies, planning and treatment management, and other topics. PRACTITIONER POINTS: Highlights changes and innovation in removal techniques and technologies in water treatment. Reviews management systems of distributed treatment systems. Discusses point-of-use treatment systems.

Efficient degradation of microcystin-LR by BiVO4/TiO2 photocatalytic nanocomposite under visible light

Microcystin-Leucine Arginine (MC-LR) is one of the most studied cyanotoxins due to its toxicity and abundant that cause health hazards for humans through of the drinking water. In this study, BiVO₄/TiO₂ nanocomposite was synthesized by hydrothermal method and employed for the removal of MC-LR. The characteristics of the catalysts were determined by FESEM, XRD and FTIR spectra. Response surface methodology (RSM) was applied to assess the effects of operating variables (pH, contact time, and catalyst dose) on the MC-LR removal. The coefficient of determination (R²) was calculated 98.7% for the response. The residual concentration of MC-LR was measured by high-performance liquid chromatography (HPLC). The results show that the highest removal efficiency of MC-LR was 98% under the optimum conditions (pH = 5, contact time = 90 min, and catalyst dose = 0.5 g/l). MC-LR decomposition efficiency by BiVO₄/TiO₂ nanocomposite was enhanced by pH reduction and increasing of contact time and catalyst dose. The prepared BiVO₄/TiO₂ nanocomposite with technological potential can be used directly in environmental preservation, specifically in the decontamination of MC-LR from aqueous solutions.