Environmental and air sampling are efficient methods for the detection and quantification of foot-and-mouth disease virus

Evaluation of Non-Invasive Sampling Techniques for the Molecular Surveillance of Equid Herpesviruses in Yearling Horses

BACKGROUND

Equid alphaherpesvirus 1 (EHV-1) is a highly contagious respiratory tract pathogen of horses, and infection may be followed by myeloencephalopathy or abortion. Surveillance and early detection have focused on PCR assays using less tolerated nasal swabs. Here, we assess non-invasive non-contact sampling techniques as surveillance tools in naturally equid gammaherpesvirus 2-shedding horses as surrogates for EHV-1.

METHODS

Horses were individually housed for 10 h periods on 2 consecutive days. Sampling included nasal swabs, nostril wipes, environmental swabs, droplet-catching devices, and air sampling. The latter was completed via two strategies: a combined air sample collected while going from horse to horse and a collective air sample collected at a stationary central point for 6 h. Samples were screened through quantitative PCR and digital PCR.

RESULTS

Nine horses on day 1 and 11 horses on day 2 were positive for EHV-1; overall, 90.9% of the nostril wipes, 81.8% of the environmental surfaces, and 90.9% of the droplet-catching devices were found to be positive. Quantitative analysis showed that the mean DNA copies detection per cm2 of nostril wipe sampled concentration (4.3 × 105 per day) was significantly (p < 0.05) comparable to that of nasal swabs (3.6 × 105 per day) followed by environmental swabs (4.3 × 105 per day) and droplet catchers (3.5 × 103 per day), respectively. Overall, 100% of the air samples collected were positive on both qPCR and dPCR. In individual air samples, a mean concentration of 1.0 × 104 copies of DNA were detected in per m3 air sampled per day, while in the collective air samples, the mean concentration was 1.1 × 103.

CONCLUSIONS

Environmental samples look promising in replacing direct contact sampling. Environmental and air sampling could become efficient surveillance tools at equestrian events; however, it needs threshold calculations for minimum detection levels.

Foot-and-Mouth Disease

Foot-and-mouth disease (FMD) is a viral infection of livestock that is an important determinant of global trade in animal products. The disease causes a highly contagious vesicular syndrome of cloven-hoofed animals. Successful control of FMD is dependent upon early detection and recognition of the clinical signs, followed by appropriate notification and response of responsible government entities. Awareness of the clinical signs of FMD amongst producers and veterinary practitioners is therefore the key in protecting US agriculture from the catastrophic impacts of an FMD outbreak. This review summarizes key clinical and epidemiologic features of FMD from a US perspective.

Recovery and Quantification of Norovirus in Air Samples from Experimentally Produced Aerosols

Norovirus is the leading cause of acute gastroenteritis in humans across all age groups worldwide. Norovirus-infected patients can produce aerosolized droplets which play a role in gastroenteritis transmission. The study aimed to assess bioaerosol sampling in combination with a virus concentrating procedure to facilitate molecular detection of norovirus genogroup (G) II from experimentally contaminated aerosols. Using a nebulizer within an experimental chamber, aerosols of norovirus GII were generated at known concentrations. Air samples were then collected in both 5 mL and 20 mL water using the SKC BioSampler at a flow rate of 12.5 L/min, 15 min. Subsequently, the virus in collected water was concentrated using speedVac centrifugation and quantified by RT-qPCR. The optimal distances between the nebulizer and the SKC BioSampler yielded high recoveries of the virus for both 5 and 20 mL collections. Following nebulization, norovirus GII RNA was detectable up to 120 min in 5 mL and up to 240 min in 20 mL collection. The concentrations of norovirus GII RNA recovered from air samples in the aerosol chamber ranged from 102 to 105 genome copies/mL, with average recoveries of 25 ± 12% for 5 mL and 22 ± 19% for 20 mL collections. These findings provide quantitative data on norovirus GII in aerosols and introduce a novel virus concentrating method for aerosol collection in water, thus enhancing surveillance of this virus.

Inferring transmission routes for foot-and-mouth disease virus within a cattle herd using approximate Bayesian computation

To control an outbreak of an infectious disease it is essential to understand the different routes of transmission and how they contribute to the overall spread of the pathogen. With this information, policy makers can choose the most efficient methods of detection and control during an outbreak. Here we assess the contributions of direct contact and environmental contamination to the transmission of foot-and-mouth disease virus (FMDV) in a cattle herd using an individual-based model that includes both routes. Model parameters are inferred using approximate Bayesian computation with sequential Monte Carlo sampling (ABC-SMC) applied to data from transmission experiments and the 2007 epidemic in Great Britain. This demonstrates that the parameters derived from transmission experiments are applicable to outbreaks in the field, at least for closely related strains. Under the assumptions made in the model we show that environmental transmission likely contributes a majority of infections within a herd during an outbreak, although there is a lot of variation between simulated outbreaks. The accumulation of environmental contamination not only causes infections within a farm, but also has the potential to spread between farms via fomites. We also demonstrate the importance and effectiveness of rapid detection of infected farms in reducing transmission between farms, whether via direct contact or the environment.

Research progress of severe acute respiratory syndrome coronavirus 2 on aerosol collection and detection

The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in late 2019 has negatively affected people's lives and productivity. Because the mode of transmission of SARS-CoV-2 is of great concern, this review discusses the sources of virus aerosols and possible transmission routes. First, we discuss virus aerosol collection methods, including natural sedimentation, solid impact, liquid impact, centrifugal, cyclone and electrostatic adsorption methods. Then, we review common virus aerosol detection methods, including virus culture, metabolic detection, nucleic acid-based detection and immunology-based detection methods. Finally, possible solutions for the detection of SARS-CoV-2 aerosols are introduced. Point-of-care testing has long been a focus of attention. In the near future, the development of an instrument that integrates sampling and output results will enable the real-time, automatic monitoring of patients.

Assessing the effectiveness of environmental sampling for surveillance of foot-and-mouth disease virus in a cattle herd

The survival of foot-and-mouth disease virus (FMDV) in the environment provides an opportunity for indirect transmission, both within and between farms. However it also presents the possibility of surveillance and detection via environmental sampling. This study assesses the effectiveness of environmental sampling strategies in the event of an outbreak, using a previous model for transmission of FMDV in a cattle herd that had been parameterized using data from transmission experiments and outbreaks. We show that environmental sampling can be an effective means of detecting FMDV in a herd, but it requires multiple samples to be taken on multiple occasions. In addition, environmental sampling can potentially detect FMDV in a herd more quickly than clinical inspection. For example, taking 10 samples every 3 days results in a mean time to detection of 6 days, which is lower than the mean time to detection estimated for the 2001 UK epidemic (8 days). We also show how environmental sampling could be used in a herd considered to be at risk as an alternative to pre-emptive culling. However, because of the time taken for virus to accumulate at the start of an outbreak, a reasonable level of confidence (> 99%) that an at-risk herd is indeed free from infection is unlikely to be achieved in less than 1 week.

Viral dynamics and immune responses to foot-and-mouth disease virus in African buffalo (Syncerus caffer)

Foot-and-mouth disease (FMD) is one of the most important livestock diseases restricting international trade. While African buffalo (Syncerus caffer) act as the main wildlife reservoir, viral and immune response dynamics during FMD virus acute infection have not been described before in this species. We used experimental needle inoculation and contact infections with three Southern African Territories serotypes to assess clinical, virological and immunological dynamics for thirty days post infection. Clinical FMD in the needle inoculated buffalo was mild and characterised by pyrexia. Despite the absence of generalised vesicles, all contact animals were readily infected with their respective serotypes within the first two to nine days after being mixed with needle challenged buffalo. Irrespective of the route of infection or serotype, there were positive associations between the viral loads in blood and the induction of host innate pro-inflammatory cytokines and acute phase proteins. Viral loads in blood and tonsil swabs were tightly correlated during the acute phase of the infection, however, viraemia significantly declined after a peak at four days post-infection (dpi), which correlated with the presence of detectable neutralising antibodies. In contrast, infectious virus was isolated in the tonsil swabs until the last sampling point (30 dpi) in most animals. The pattern of virus detection in serum and tonsil swabs was similar for all three serotypes in the direct challenged and contact challenged animals. We have demonstrated for the first time that African buffalo are indeed systemically affected by FMD virus and clinical FMD in buffalo is characterized by a transient pyrexia. Despite the lack of FMD lesions, infection of African buffalo was characterised by high viral loads in blood and oropharynx, rapid and strong host innate and adaptive immune responses and high transmissibility.

Airborne Transmission of Foot-and-Mouth Disease Virus: A Review of Past and Present Perspectives

The primary transmission route for foot-and-mouth disease (FMD), a contagious viral disease of cloven-hoofed animals, is by direct contact with infected animals. Yet indirect methods of transmission, such as via the airborne route, have been shown to play an important role in the spread of the disease. Airborne transmission of FMD is referred to as a low probability- high consequence event as a specific set of factors need to coincide to facilitate airborne spread. When conditions are favourable, airborne virus may spread rapidly and cause disease beyond the imposed quarantine zones, thus complicating control measures. Therefore, it is important to understand the nature of foot-and-mouth disease virus (FMDV) within aerosols; how aerosols are generated, viral load, how far aerosols could travel and survive under different conditions. Various studies have investigated emissions from infected animals under laboratory conditions, while others have incorporated experimental data in mathematical models to predict and trace outbreaks of FMD. However, much of the existing literature focussing on FMDV in aerosols describe work which was undertaken over 40 years ago. The aim of this review is to revisit existing knowledge and investigate how modern instrumentation and modelling approaches can improve our understanding of airborne transmission of FMD.

Recent advancements in the measurement of pathogenic airborne viruses

Air-transmissible pathogenic viruses, such as influenza viruses and coronaviruses, are some of the most fatal strains and spread rapidly by air, necessitating quick and stable measurements from sample air volumes to prevent further spread of diseases and to take appropriate steps rapidly. Measurements of airborne viruses generally require their collection into liquids or onto solid surfaces, with subsequent hydrosolization and then analysis using the growth method, nucleic-acid-based techniques, or immunoassays. Measurements can also be performed in real time without sampling, where species-specific determination is generally disabled. In this review, we introduce some recent advancements in the measurement of pathogenic airborne viruses. Air sampling and measurement technologies for viral aerosols are reviewed, with special focus on the effects of air sampling on damage to the sampled viruses and their measurements. Measurement of pathogenic airborne viruses is an interdisciplinary research area that requires understanding of both aerosol technology and biotechnology to effectively address the issues. Hence, this review is expected to provide some useful guidelines regarding appropriate air sampling and virus detection methods for particular applications.

Environmental sampling for the detection of foot-and-mouth disease virus and peste des petits ruminants virus in a live goat market, Nepal

Livestock markets are considered vital parts of the agricultural economy, particularly in developing countries where livestock keeping contributes to both food security and economic stability. Animals from diverse sources are moved to markets, they mix while they are there and are subsequently redistributed over wide geographic areas. Consequently, markets provide an opportunity for targeted surveillance for circulating pathogens. This study investigated the use of environmental sampling at a live goat market in Nepal for the detection of foot-and-mouth disease virus (FMDV) and peste des petits ruminants virus (PPRV), both of which are endemic. Five visits to the market were carried out between November 2016 and April 2018, with FMDV RNA detected on four visits and PPRV RNA detected on all five visits. Overall, 4.1% of samples (nine out of 217) were positive for FMDV RNA and 60.8% (132 out of 217) were positive for PPRV RNA, though the proportion of positive samples varied amongst visits. These results demonstrate that non-invasive, environmental sampling methods have the potential to be used to detect circulation of high priority livestock diseases at a live animal market and, hence, to contribute to their surveillance and control.

Distribution of SARS-CoV-2 RNA signal in a home with COVID-19 positive occupants

Although many COVID-19 patients isolate and recover at home, the dispersal of SARS-CoV-2 onto surfaces and dust within the home environment remains poorly understood. To investigate the distribution and persistence of SARS-CoV-2 in a home with COVID-19 positive occupants, samples were collected from a household with two confirmed COVID-19 cases (one adult and one child). Home surface swab and dust samples were collected two months after symptom onset (and one month after symptom resolution) in the household. The strength of the SARS-CoV-2 molecular signal in fomites varied as a function of sample location, surface material and cleaning practices. Notably, the SARS-CoV-2 RNA signal was detected at several locations throughout the household although cleaning appears to have attenuated the signal on many surfaces. Of the 24 surfaces sampled, 46% were SARS-CoV-2 positive at the time of sampling. The SARS-CoV-2 concentrations in dust recovered from floor and HVAC filter samples ranged from 104 to 105 N2 gene copies/g dust. While detection of viral RNA does not imply infectivity, this study confirms that the SARS-CoV-2 RNA signal can be detected at several locations within a COVID-19 isolation home and can persist after symptoms have resolved. In addition, the concentration of SARS-CoV-2 (normalized per unit mass of dust) recovered in home HVAC filters may prove useful for estimating SARS-CoV-2 airborne levels in homes. In this work, using the quantitative filter forensics methodology, we estimated an average integrated airborne SARS-CoV-2 concentration of 69 ± 43 copies/m3. This approach can be used to help building scientists and engineers develop best practices in homes with COVID-19 positive occupants.