A comparative anatomical study of the human knee and six animal species

Animal models used in meniscal repair research from ex vivo to in vivo: A systematic review

This systematic review, registered with Prospero, aims to identify an optimal animal model for meniscus repair research, moving from ex vivo experimentation to in vivo studies. Data sources included PubMed, Medline, all Evidence-Based Medicine Reviews, Web of Science, and Embase searched in March 2023. Studies were screened using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Extracted data including animal model, type of experiment, type of tear, surgical techniques, and measured outcomes, were recorded, reviewed, and analyzed by four independent reviewers. The SYstematic Review Centre for Laboratory animal Experimentation (SYRCLE) Rob tool was used for critical appraisal and risk of bias assessment. Out of 11,719 studies, 72 manuscripts were included for data extraction and analysis; 41 ex vivo extra-articular studies, 20 ex vivo intra-articular studies, and only 11 in vivo studies. Six animal models were employed: porcine, bovine, lapine, caprine, canine, and ovine. Longitudinal lesions were the most frequently studied tear pattern and sutures the most common repair technique. Studied outcomes focused mainly on biomechanical assessments and gross observations. This systematic review can guide researchers in their choice of animal model for meniscus repair research; it highlighted the strengths of the porcine, caprine, and bovine models for ex vivo cadaveric studies, while the porcine and caprine models were found to be more suited to in vivo studies due to their similarities with human anatomy. Research teams should familiarize themselves with the advantages and disadvantages of various animal models before initiating protocols to improve standardization in the field.

Incomplete histologic healing and diminished biomechanical strength of meniscus-bone interface after medial meniscus posterior root transosseous repair in a goat model

PURPOSE

To enhance the understanding of histological healing after repairing medial meniscal posterior root tear (MMPRT) at an early stage, utilizing a goat model.

METHODS

Eighteen adult goats, totaling thirty-six knee joints, were allocated into three groups (n = 12): Sham group (Sham), Root Tear group (RT), and Root Tear with Transosseous Suture group (RTS). At 12- and 24-week intervals post-surgery, all the knees were harvested for imaging, macroscopic, histological, and biomechanical assessments.

RESULTS

The intact root served as a meniscus-bone interface which connected the tibial and the circular fibers of the meniscus, with a bony insertion and a root-meniscus transition. A direct-fibrous-connection displayed at the bony insertion proximal to the synovium in the RTS group, while the remaining regions of the root displayed indirect-fibrous healing. The healing in the RT group was disjointed and reminiscent of scar tissue. The RTS group exhibited a more pronounced coronal extrusion compared to the Sham group (0.42 ± 0.09 vs. 0.19 ± 0.02, P = 0.0012) but was improved relative to that of the RT group (0.49 ± 0.02, P = 0.0028). The failure load and stiffness of the RTS group were notably higher than those of the RT group, with a strength of 42.67% and a stiffness of 83.75% of the intact root. All the samples ruptured at the root-meniscus transitions.

CONCLUSION

The incomplete healing may be attributed to the histological factors underlying the low healing rate and persistent MME. Notably, the region attached to the posterior-cruciate-ligament exhibited superior healing compared to other regions of the bony insertion in the repaired group. Conversely, the root-meniscus transition displayed discontinuity, representing a mechanical weakness in the healing process.

CLINICAL RELEVANCE

Modifications of bone tunnel positioning and suture placement could be undertaken in subsequent studies to particularly enhance the healing of the root-meniscus transition.

Isolation and Characterization of Meniscus Progenitor Cells From Rat, Rabbit, Goat, and Human

OBJECTIVE

Meniscus progenitor cells (MPCs) have been identified as promising candidates for meniscus regeneration, and it is crucial for us to understand meniscus injury repair mechanism at the cellular level. In this study, we investigate the biological properties of MPCs isolated from different species using the differential adhesion to fibronectin (DAF) technique. We aim to characterize MPCs in different species and evaluate the feasibility of these models for future meniscal investigation.

DESIGN

MPCs were isolated from freshly digested meniscus from rat, rabbit, goat, and human cells using DAF. Biological properties, including proliferation, colony-forming, multilineage differentiation, and migration abilities, were compared in MPCs and their corresponding mixed meniscus cell (MCs) population in each species.

RESULTS

MPCs were successfully isolated by the DAF technique in all species. Rat MPCs appeared cobblestone-like, rabbit MPCs were more polygonal, goat MPCs had a spindle-shaped morphology, human MPCs appear more fibroblast-like. Compared with MCs, isolated MPCs showed progenitor cell characteristics, including multilineage differentiation ability and MSC (mesenchymal stem cells) markers (CD166, CD90, CD44, Stro-1) expression. They also highly expressed fibronectin receptors CD49e and CD49c. MPCs also showed greater proliferation capacity and retained colony-forming ability. Except for goat MPCs showed greater migration abilities than MCs, no significant differences were found in the migration ability between MPCs and MCs in other species.

CONCLUSION

Our study shows that DAF is an effective method for isolating MPCs from rat, rabbit, goat, and human. MPCs in these species demonstrated similar characteristics, including greater proliferation ability and better chondrogenic potential.

Neither All-Inside, nor Inside-Out, nor Outside-In Repair Demonstrates Superior Biomechanical Properties for Vertical Meniscal Tears: A Systematic Review of Human Cadaveric Studies

PURPOSE

To systematically review the literature regarding the biomechanical properties of different repair techniques and fixation methods for vertically oriented meniscal tears.

METHODS

Human cadaveric studies evaluating the biomechanical properties of different repair techniques for vertically oriented meniscal tears were identified using the PubMed, EMBASE, and Cumulative Index to Nursing & Allied Health databases. Primary outcomes included load to failure, displacement, stiffness, peak contact pressure, and contact area of repaired menisci. Repair techniques from included studies were reclassified into a total of 19 distinct all-inside (AI), inside-out (IO), or outside-in (OI) techniques.

RESULTS

Sixteen studies were included (420 total menisci). Contact pressure and area were restored to intact-state values across all 5 compressive load studies at low knee flexion angles but not at greater knee flexion angles (i.e., >60°). There were no significant differences in contact pressure or area between AI, IO, and OI techniques across all studies. Some studies demonstrated statistically significant advantages in tensile properties with IO techniques when compared with AI techniques, whereas others found AI techniques to be superior. No studies directly compared tensile properties of OI techniques with those of AI or IO techniques. Vertical mattress suture configurations resulted in significantly greater load to failure and decreased displacement compared with horizontal mattress configurations in 67% of studies comparing the 2 techniques. There was no difference in the rate of tissue failure in AI (66.97%), IO (60.38%), or OI (66.67%, χ2 = 0.83, P = .66) techniques.

CONCLUSIONS

Contact mechanics are reliably restored after repair of vertical meniscal tears at low flexion angles but inconsistently restored at greater flexion angles, regardless of technique. Vertical mattress configurations outperformed horizontal mattress configurations under tensile load. There are conflicting data regarding the comparison of tensile properties between AI and IO techniques. Ultimately, neither AI, IO, nor OI repair demonstrated superior biomechanical properties in the present literature.

CLINICAL RELEVANCE

Several repair techniques demonstrate favorable biomechanical properties for vertical meniscal tears under tensile and compressive loads. Neither AI, IO, nor OI repair techniques demonstrate superior biomechanical properties at this time.

Triamcinolone acetonide has minimal effect on short- and long-term metabolic activities of cartilage

Intra-articular corticosteroid injections, such as triamcinolone acetonide (TA), are commonly used by clinicians to manage joint synovial inflammation. However, due to conflicting evidence in literature, there is a fear among clinicians that the injections may be harmful to otherwise healthy cartilage in young patients. The purpose of this study was to evaluate the effects of TA on young, healthy chondrocytes. Articular cartilage samples were harvested from bovine knee joints (1-2 months old). In both healthy and inflammatory (interleukin-1β) challenged cartilage, samples were treated with TA at doses ranging from 1 nM to 200 μM. Following a short- (2 days) or long-term (10-14 days) treatment, chondrocyte viability, proliferation, and extracellular matrix (ECM) synthesis and degradation were evaluated with a click chemistry-based technique. Chondrocyte viability, proliferation, and anabolic activity were all minimally affected by short-term and long-term TA treatment. After both acute and sustained inflammatory challenges, TA reduced the catabolic activities in cartilage, reducing nascent glycosaminoglycan loss and maintaining cartilage mechanical properties. Overall, at physiologically relevant doses, TA had minimal negative impact on chondrocytes when maintained within their native ECM. Clinical significance: The findings provide new insight for current clinical practices concerning the use of TA in intra-articular injections, especially in young patients, and established a foundation for future investigations into the impact of corticosteroids on joint homeostasis.

Effects of various load magnitudes on ACL: an in vitro study using adolescent porcine stifle joints

INTRODUCTION

The escalating incidence of anterior cruciate ligament (ACL) injuries, particularly among adolescents, is a pressing concern. The study of ACL biomechanics in this demographic presents challenges due to the scarcity of cadaveric specimens. This research endeavors to validate the adolescent porcine stifle joint as a fitting model for ACL studies.

METHODS

We conducted experiments on 30 fresh porcine stifle knee joints. (Breed: Yorkshire, Weight: avg 90 lbs, Age Range: 2-4 months). They were stored at - 22 °C and a subsequent 24-h thaw at room temperature before being prepared for the experiment. These joints were randomly assigned to three groups. The first group served as a control and underwent only the load-to-failure test. The remaining two groups were subjected to 100 cycles, with forces of 300N and 520N, respectively. The load values of 300N and 520N correspond to three and five times the body weight (BW) of our juvenile porcine, respectively.

RESULT

The 520N force demonstrated a higher strain than the 300N, indicating a direct correlation between ACL strain and augmented loads. A significant difference in load-to-failure (p = 0.014) was observed between non-cyclically loaded ACLs and those subjected to 100 cycles at 520N. Three of the ten samples in the 520N group failed before completing 100 cycles. The ruptured ACLs from these tests closely resembled adolescent ACL injuries in detachment patterns. ACL stiffness was also measured post-cyclical loading by applying force and pulling the ACL at a rate of 1 mm per sec. Moreover, ACL stiffness measurements decreased from 152.46 N/mm in the control group to 129.42 N/mm after 100 cycles at 300N and a more significant drop to 86.90 N/mm after 100 cycles at 520N. A one-way analysis of variance (ANOVA) and t-test were chosen for statistical analysis.

CONCLUSIONS

The porcine stifle joint is an appropriate model for understanding ACL biomechanics in the skeletally immature demographic. The results emphasize the ligament's susceptibility to injury under high-impact loads pertinent to sports activities. The study advocates for further research into different loading scenarios and the protective role of muscle co-activation in ACL injury prevention.

Biomechanical Stability of Third-Generation Adjustable Suture Loop Devices Versus Continuous Loop Button Device for Cortical Fixation of ACL Tendon Grafts

Background

Concerns regarding the primary stability of early adjustable loop button (ALB) devices for cortical fixation of tendon grafts in anterior cruciate ligament reconstruction (ACLR) have led to the development of new implant designs.

Purpose

To evaluate biomechanical stability of recent ALB implants in comparison with a continuous loop button (CLB) device.

Study Design

Controlled laboratory study.

Methods

ACLR was performed in a porcine model (n = 40) using 2-strand porcine flexor tendons with a diameter of 8 mm. Three ALB devices (Infinity Button [ALB1 group]; Tightrope II RT [ALB2 group]; A-TACK [ALB3 group]) and 1 CLB device (FlippTack with polyethylene suture) were used for cortical tendon graft fixation. Cyclic loading (1000 cycles up to 250 N) with complete unloading were applied to the free end of the tendon graft using a uniaxial testing machine, followed by load to failure. Elongation, stiffness, yield load, and ultimate failure load were recorded and compared between the groups using a Kruskal-Wallis test with post hoc Dunn correction.

Results

Elongation after 1000 cycles at 250 N was similar between groups (ALB1, 4.5 ± 0.7 mm; ALB2, 4.8 ± 0.8 mm; ALB3, 4.5 ± 0.6 mm; CLB, 4.5 ± 0.8 mm), as was load to failure (ALB1, 838 ± 109 N; ALB2, 930 ± 89 N; ALB3, 809 ± 103 N; CLB, 842 ± 80 N). Stiffness was significantly higher in the ALB1 group compared with the CLB group (262.3 ± 21.6 vs 229.3 ± 15.1 N/mm; P < .05). No significant difference was found between the 4 groups regarding yield load. Constructs failed either by rupture of the loop, breakage of the button, or rupture of the tendon.

Conclusion

The tested third-generation ALB devices for cortical fixation in ACLR withstood cyclic loading with complete unloading without significant differences to a CLB device.

Clinical Relevance

The third-generation ALB devices tested in the present study provided biomechanical stability comparable with that of a CLB device. Furthermore, ultimate failure loads of all tested implants exceeded the loads expected to occur in the postoperative period after ACLR.

Knee osteoarthritis: A review of animal models and intervention of traditional Chinese medicine

BACKGROUND

Knee osteoarthritis (KOA) characterized by degeneration of knee cartilage and subsequent bone hyperplasia is a prevalent joint condition primarily affecting aging adults. The pathophysiology of KOA remains poorly understood, as it involves complex mechanisms that result in the same outcome. Consequently, researchers are interested in studying KOA and require appropriate animal models for basic research. Chinese herbal compounds, which consist of multiple herbs with diverse pharmacological properties, possess characteristics such as multicomponent, multipathway, and multitarget effects. The potential benefits in the treatment of KOA continue to attract attention.

PURPOSE

This study aims to provide a comprehensive overview of the advantages, limitations, and specific considerations in selecting different species and methods for KOA animal models. This will help researchers make informed decisions when choosing an animal model.

METHODS

Online academic databases (e.g., PubMed, Google Scholar, Web of Science, and CNKI) were searched using the search terms "knee osteoarthritis," "animal models," "traditional Chinese medicine," and their combinations, primarily including KOA studies published from 2010 to 2023.

RESULTS

Based on literature retrieval, this review provides a comprehensive overview of the methods of establishing KOA animal models; introduces the current status of advantages and disadvantages of various animal models, including mice, rats, rabbits, dogs, and sheep/goats; and presents the current status of methods used to establish KOA animal models.

CONCLUSION

This study provides a review of the animal models used in recent KOA research, discusses the common modeling methods, and emphasizes the role of traditional Chinese medicine compounds in the treatment of KOA.

Anatomical analysis of ligaments surrounding calcaneocuboid joint; implications for role in foot stability

PURPOSE

The calcaneocuboid joint is located in the lateral part of the foot and acts as a major stabilizer for the foot. Injuries to this joint often occur in association with ankle or foot injuries and are frequently overlooked, subsequently causing chronic pain or osteoarthritis. However, the relationship between ligaments surrounding the joint and joint instability remains unclear. Therefore, this study aimed to clarify the morphology and position of the ligaments surrounding the calcaneocuboid joint, and to reveal the relationship between the ligament structure.

METHODS

The position and morphology of the bifurcate ligament (subdivided into calcaneonavicular and calcaneocuboid ligaments), dorsal calcaneocuboid ligament, lateral calcaneocuboid ligament, long plantar ligament, and short plantar ligament were measured (N = 11 feet in 6 Japanese cadavers). The circumference of the joint was quartered, while the ligament-uncovered area and the estimated cross-sectional area of each ligament were compared between the four sides. Furthermore, the estimated cross-sectional area of each ligament was calculated as an index for the ligament strength.

RESULTS

The inferolateral side of the calcaneocuboid joint had the most uncovered area (54.63%) by the ligaments. In addition, the cross-sectional area of the ligaments on the lateral side was considerably smaller than that on the medial side.

CONCLUSION

Our results suggest that ligament weakness on the inferolateral side may cause instability of the calcaneocuboid joint, especially after an inversion sprain injury, and may decrease the lateral longitudinal arch function, which results in chronic foot pain.

Device Design and Diagnostic Imaging of Radiopaque 3D Printed Tissue Engineering Scaffolds

3D printed biomaterial implants are revolutionizing personalized medicine for tissue repair, especially in orthopedics. In this study, a radiopaque Bi 2 O 3 doped polycaprolactone ( PCL ) composite is developed and implemented to enable the use of diagnostic X-ray technologies, especially photon counting X-ray computed tomography ( PCCT ), for comprehensive in vivo device monitoring. PCL filament with homogeneous Bi 2 O 3 nanoparticle ( NP ) dispersion (0.8 to 11.7 wt%) are first fabricated. Tissue engineered scaffolds ( TES ) are then 3D printed with the composite filament, optimizing printing parameters for small feature size and severely overhung geometries. These composite TES are characterized via micro-computed tomography ( µ CT ), tensile testing, and a cytocompatibility study, with Bi 2 O 3 mass fractions as low as 2 wt% providing excellent radiographic distinguishability, improved tensile properties, and equivalent cytocompatibility of neat PCL. The excellent radiographic distinguishability is validated in situ by imaging 4 and 7 wt% TES in a mouse model with µCT, showing excellent agreement with in vitro measurements. Subsequently, CT image-derived swine menisci are 3D printed with composite filament and re-implanted in their corresponding swine legs ex vivo . Re-imaging the swine legs via clinical CT allows facile identification of device location and alignment. Finally, the emergent technology of PCCT unambiguously distinguishes implanted menisci in situ.

Comparison of Time-Zero Primary Stability Between a Biodegradable Magnesium Bone Staple and Metal Bone Staples for Knee Ligament Fixation: A Biomechanical Study in a Porcine Model

Background

Bone staples have been shown previously to be a viable modality for cortical tendon graft fixation in ligament knee surgery. However, soft tissue reactions have been reported, making implant removal necessary. Magnesium alloys are a promising material for biodegradable orthopaedic implants, with mechanical properties closely resembling those of human bone.

Purpose

To compare the primary stability of a biodegradable bone staple prototype made from magnesium to bone staples made from metal in the cortical fixation of tendon grafts during knee surgery.

Study Design

Controlled laboratory study.

Methods

Primary stability of peripheral tendon graft fixation was assessed in a porcine model of medial collateral ligament reconstruction. Two commercially available metal bone staples (Richards fixation staple with spikes [Me1] and spiked ligament staple [Me2]) were compared with a magnesium bone staple prototype for soft tissue fixation. Primary stability was assessed using a uniaxial materials testing machine. Cyclic loading at 50 and 100 N was applied for 500 cycles each, followed by load-to-failure testing.

Results

After 500 cycles at 50 N, elongation was 1.5 ± 0.5 mm in the Me1 group, 1.9 ± 0.5 mm in the Me2 group, and 1.8 ± 0.4 mm in the magnesium group. After 1000 cycles of loading (500 cycles at 50 N and 500 at 100 N), elongation was 3.6 ± 0.9 mm in the Me1 group, 3.5 ± 0.6 mm in the Me2 group, and 4.1 ± 1.0 mm in the magnesium group. No significant differences regarding elongation were found between the groups. Load to failure was 352 ± 115 N in the Me1 group, 373 ± 77 N in the Me2 group, and 449 ± 92 N in the magnesium group, with no significant difference between the groups.

Conclusion

In this study, the magnesium bone staples provided appropriate time-zero biomechanical primary stability in comparison with metal bone staples and may therefore be a feasible alternative for cortical fixation of tendon grafts in knee surgery.

Clinical Relevance

The biodegradability of magnesium bone staples would eliminate the need for later implant removal.

Material Properties of Fiber Bundles of the Superficial Medial Collateral Ligament of the Knee Joint

The superficial medial collateral ligament (sMCL) of the human knee joint has functionally separate anterior and posterior fiber bundles. The two bundles are alternatively loaded as the knee flexion angle changes during walking. To date, the two bundles are usually not distinguished in knee ligament simulations because there has been little information about their material properties. In this study, we conducted quasi-static tensile tests on the sMCL of matured porcine stifle joints and obtained the material properties of the anterior bundle (AB), posterior bundle (PB), and whole ligament (WL). AB and PB have similar failure stress but different threshold strain, modulus, and failure strain. As a result, we recommend assigning different material properties (i.e., modulus and failure strain) to the two fiber bundles to realize biofidelic ligament responses in human body models. However, it is often inconvenient to perform tensile tests on AB and PB. Hence, we proposed a microstructural model-based approach to predict the material properties of AB and PB from the test results of WL. Such obtained modulus values of AB and PB had an error of 2% and 0.3%, respectively, compared with those measured from the tests. This approach can reduce the experimental cost for acquiring the needed mechanical property data for simulations.

Braided biomimetic PCL grafts for anterior cruciate ligament repair and regeneration

Anterior cruciate ligament (ACL) is a knee joint stabilizer with a limited regeneration capacity mainly because of low cellular content. State-of-the-art procedures are unable to restore the functions of the tissue as demonstrated by limited success rates. Regenerative engineering can offer a solution for restoring the functions of torn/ruptured ligaments provided that biomimetic grafts are available as grafts/scaffolds. However, a model construct to test behavior of cells to better understand the healing mechanism of ACL is still missing. This study, firstly, aimed at creating an injured rabbit ACL model. Then, the injured and healthy ACL tissues were characterized in terms of alignment and diameter distributions of collagen fibrils. Next, polycaprolactone (PCL) grafts were prepared from braided electrospun meshes and were characterized in terms of alignment and diameter distributions of fibers. Finally, biomechanical properties of ACL tissue and mechanical properties of PCL grafts were determined and compared. Findings demonstrated that distributions of the fiber diameters of PCL electrospun grafts were similar to diameter distribution of collagens of healthy and injured rabbit ACL. The novelty of this study relies on the determination of the diameter distribution of collagens of healthy and injured rabbit ACL tissues, and fabrication of PCL grafts with diameter distributions similar to that seen in healthy and injured ACLs. This study is significant because it addresses a worldwide clinical problem associated with millions of patients. The fibrous biomimetic graft designed in this study is different from the traditional grafts that exhibit unimodal distribution, and it is expected to have a significant contribution to ACL regeneration efforts.

Augmentation of a Nonanatomical Repair of a Medial Meniscus Posterior Root Tear With Centralization Using Three Knotless Anchors May Be Associated With Less Meniscal Extrusion and Better Compressive Load Distribution in Mid-Flexion Compared With Non-Anatomical Root Repair Alone in a Porcine Knee Model

PURPOSE

To investigate the biomechanics of the centralization augmentation using knotless soft anchors to a nonanatomical transtibial pull-out root repair in a porcine medial meniscus posterior root tear (MMPRT) model.

METHODS

Porcine knee joints (N = 10) were used to perform one of the following procedures: (1) intact; (2) MMPRT; (3) nonanatomical root repair; (4) nonanatomical root repair with centralization using 2 anchors: anchors were inserted at the posterior medial collateral ligament (MCL) border and 10 mm anterior to the posterior MCL border; and (5) nonanatomical root repair with centralization using 3 anchors: another anchor was placed 10 mm posterior to the posterior MCL border. Contact area on the medial meniscus (MM), contact pressure in the MM and tibial cartilage, and MM extrusion were evaluated at 30°, 45°, 60°, and 90° knee flexions under 200 N compressive force.

RESULTS

MM extrusion at the posterior MCL border was significantly reduced after root repair with centralization using 3 anchors than after root repair alone at 30° (-0.063 mm vs 1.5 mm, P = .017), 45° (0.21 mm vs 1.7 mm, P = .018), and 60° (0.78 mm vs 2.3 mm, P = .019). There were no significant differences in MM extrusion between the root repair alone and root repair with centralization using 2 anchors at all flexion angles. The contact area in the middle and posterior MM was significantly greater after centralization with 3 anchors than after root repair alone at all flexion angles (except the posterior MM at 90°). The mean contact pressure in the tibial cartilage was significantly lower after centralization with 3 anchors than after root repair at all angles.

CONCLUSIONS

Augmentation of a nonanatomical repair of a medial meniscus posterior root tear with centralization using three knotless anchors may be associated with less meniscal extrusion and better compressive load distribution between 30° and 60° flexion compared with nonanatomical root repair alone in a porcine model.

CLINICAL RELEVANCE

This biomechanical study at time zero suggests that the addition of centralization using 3 knotless anchors may reduce MM extrusion and restore the load-distributing function of the MM.

Morphological and histological evaluation of the tendon-bone junction in porcine shoulders to create a rotator cuff tear and repair model

BACKGROUND

This study aimed to morphologically and histologically examine whether pig is useful as models for rotator cuff tear (RCT).

METHODS

The morphology of the scapula and humerus bones was evaluated by taking X-ray and three-dimensional computed tomography (3D CT) scans of the right shoulders of five female pigs (age: 4 months). The rotator cuff (RC) footprint at the humeral insertion of these was observed and its shape was measured. Next, they underwent general anesthesia and an acute rotator cuff tear/rotator cuff repair (RCT/RCR) model was created using a deltoid split approach. Four weeks after surgery, the animals were euthanized, the shoulder joints were harvested, and the repaired RC was evaluated by hematoxylin and eosin staining and toluidine blue staining.

RESULTS

The scapula of the pig had a vestigial acromion, in contrast to that in humans. The supraspinatus and infraspinatus tendons were connected so as to overlap each other and attached to the postero-superior part of the greater tuberosity. These tendons were located extra-articularly, separate from the joint capsule. The average antero-posterior length of the foot print was 17.4 ± 0.7 mm on the medial margin and 19.1 ± 2.2 mm on the lateral margin. The maximum medial-to-lateral width of it was 5.1 ± 0.5 mm. In all RCT/RCR models at 4 weeks after surgery, the repaired RC compound tendon was visually confirmed to be continuous with the footprint. Histologically, it was confirmed that regeneration of the four-layer structure of the bone-tendon junction had occurred.

CONCLUSION

Porcine supraspinatus and infraspinatus attachment to the greater tuberosity have a structure similar to that of sheep and dogs, which is advantageous for creating the RCT/RCR model. It might be used for future in vivo studies of shoulder joint diseases.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

Pigs could potentially serve as a viable model for rotator cuff tears.

Effect of Injury to the Lateral Meniscotibial Ligament and Meniscofibular Ligament on Meniscal Extrusion: Biomechanical Evaluation of the Capsulodesis and Centralization Techniques in a Porcine Knee Model

Background

Previous biomechanical studies of the meniscotibial ligament have determined that it contributes to meniscal stability. An injury to it can cause the meniscus to extrude, and reconstruction of that ligament significantly reduces extrusion.

Purpose

To assess the biomechanical effects of sectioning the lateral meniscotibial ligament (LMTL) and the meniscofibular ligament (MFL) with respect to the radial mobility of the lateral meniscus and to evaluate the biomechanical effects of the capsulodesis and centralization techniques.

Study Design

Controlled laboratory study.

Methods

The lateral meniscus of 22 porcine knees was evaluated. They were mounted on a testing apparatus to apply muscle and ground-reaction forces. The meniscus was evaluated at 30° and 60° of knee flexion using 2 markers placed on the posterior cruciate ligament and the lateral meniscus after applying an axial compression of 200 N to the knee joint. Measurements were recorded under 5 conditions: intact lateral meniscus, injury of the LMTL, subsequent injury of the MFL, the use of the open capsulodesis technique, and the reconstruction of the LMTL and the MFL with the centralization technique.

Results

The distance between the 2 markers was significantly greater in the extrusion group (combined lesion of the LMTL and MFL) than in the intact or reconstruction groups (capsulodesis and centralization techniques; P < .001 in all cases). In the cases of load application, no significant differences were observed between the control group (intact meniscus) and the groups on which the reconstruction techniques were performed. There were also no differences when comparing the results obtained between both reconstruction techniques. In all settings, the distance between the 2 markers increased with the increase in the knee flexion angle.

Conclusion

In a porcine model, the LMTL and the MFL participated as restrictors of the radial mobility of the lateral meniscus during loading. Their injury caused a significant increase in lateral meniscal extrusion, and the centralization and the capsulodesis procedures were able to reduce extrusion.

Clinical Relevance

This study demonstrates the capacity of the LMTL and the MFL to restrict the radial mobility of the lateral meniscus during loading and how it is affected when they are injured.

Interference screws manufactured from magnesium display similar primary stability for soft tissue anterior cruciate ligament graft fixation compared to a biocomposite material - a biomechanical study

PURPOSE

Biodegradable interference screws (IFS) can be manufactured from different biomaterials. Magnesium was previously shown to possess osteoinductive properties, making it a promising material to promote graft-bone healing in anterior cruciate ligament reconstruction (ACLR). The purpose of this study was to compare IFS made from magnesium to a contemporary biocomposite IFS.

METHODS

In a porcine model of ACL reconstruction, deep porcine flexor tendons were trimmed to a diameter of 8 mm, sutured in Krackow technique, and fixed with either 8 × 30 mm biocomposite IFS (Bc-IFS) or 8 × 30 mm magnesium IFS (Mg-IFS) in an 8 mm diameter bone tunnel in porcine tibiae. Cyclic loading for 1000 cycles from 0 to 250 N was applied, followed by load to failure testing. Elongation, load to failure and stiffness of the tested constructs was determined.

RESULTS

After 1000 cycles at 250 N, elongation was 4.8 mm ± 1.5 in the Bc-IFS group, and 4.9 mm ± 1.5 in the Mg-IFS group. Load to failure was 649.5 N ± 174.3 in the Bc-IFS group, and 683.8 N ± 116.5 in the Mg-IFS group. Stiffness was 125.3 N/mm ± 21.9 in the Bc-IFS group, and 122.5 N/mm ± 20.3 in the Mg-IFS group. No significant differences regarding elongation, load to failure and stiffness between Bc-IFS and Mg-IFS were observed.

CONCLUSION

Magnesium IFS show comparable biomechanical primary stability in comparison to biocomposite IFS and may therefore be an alternative to contemporary biodegradable IFS.

Preclinical tendon and ligament models: Beyond the 3Rs (replacement, reduction, and refinement) to 5W1H (why, who, what, where, when, how)

Several tendon and ligament animal models were presented at the 2022 Orthopaedic Research Society Tendon Section Conference held at the University of Pennsylvania, May 5 to 7, 2022. A key objective of the breakout sessions at this meeting was to develop guidelines for the field, including for preclinical tendon and ligament animal models. This review summarizes the perspectives of experts for eight surgical small and large animal models of rotator cuff tear, flexor tendon transection, anterior cruciate ligament tear, and Achilles tendon injury using the framework: "Why, Who, What, Where, When, and How" (5W1H). A notable conclusion is that the perfect tendon model does not exist; there is no single gold standard animal model that represents the totality of tendon and ligament disease. Each model has advantages and disadvantages and should be carefully considered in light of the specific research question. There are also circumstances when an animal model is not the best approach. The wide variety of tendon and ligament pathologies necessitates choices between small and large animal models, different anatomic sites, and a range of factors associated with each model during the planning phase. Attendees agreed on some guiding principles including: providing clear justification for the model selected, providing animal model details at publication, encouraging sharing of protocols and expertise, improving training of research personnel, and considering greater collaboration with veterinarians. A clear path for translating from animal models to clinical practice was also considered as a critical next step for accelerating progress in the tendon and ligament field.

Postnatal morpho-functional development of a dog's meniscus

This study evaluates the morpho-functional modifications that characterize meniscal development from neonatal to adult dogs. Even if menisci are recognized as essential structures for the knee joint, poor information is available about their morphogenesis, in particular in dog models. Menisci from a group of Dobermann Pinchers aged 0, 10, 30 days, and 4 years (T0, T10, T30, adult, respectively) were analyzed by SEM, histochemistry (Safranin O and Picro Sirius Red Staining analyzed under a polarized light microscope), immunofluorescences (collagen type I and II), biomechanical (compression) and biochemical analyses (glycosaminoglycans, GAGs, and DNA content). SEM analyses revealed that the T0 meniscus is a bulgy structure that during growth tends to flatten, firstly in the inner zone (T10) and then even in the outer zone (T30), until the achievement of the completely smooth adult final shape. These results were further supported by the histochemistry analyses in which the deposition of GAGs started from T30, and the presence of type I birefringent collagen fibers was observed from T0 to T30, while poorly refringent type III collagen fibers were observed in the adult dogs. Double immunofluorescence analyses also evidenced that the neonatal meniscus contains mainly type I collagen fibers, as well as the T10 meniscus, and demonstrated a more evident regionalization and crimping in the T30 and adult meniscus. Young's elastic modulus of the meniscus in T0 and T10 animals was lower than the T30 animals, and this last group was also lower than adult ones (T0-T10 vs T30 vs adult). Biochemical analysis confirmed that cellularity decreases over time from neonatal to adult (p < 0.01). The same decreasing trend was observed in GAGs deposition. These results may suggest that the postnatal development of canine meniscus may be related to the progressive functional locomotory development: after birth, the meniscus acquires its functionality over time, through movement, load, and growth itself.

Derivation of Arbas Cashmere Goat Induced Pluripotent Stem Cells in LCDM with Trophectoderm Lineage Differentiation and Interspecies Chimeric Abilities

The Arbas cashmere goat is a unique biological resource that plays a vital role in livestock husbandry in China. LCDM is a medium with special small molecules (consisting of human LIF, CHIR99021, (S)-(+)-dimethindene maleate, and minocycline hydrochloride) for generation pluripotent stem cells (PSCs) with bidirectional developmental potential in mice, humans, pigs, and bovines. However, there is no report on whether LCDM can support for generation of PSCs with the same ability in Arbas cashmere goats. In this study, we applied LCDM to generate goat induced PSCs (giPSCs) from goat fetal fibroblasts (GFFs) by reprogramming. The derived giPSCs exhibited stem cell morphology, expressing pluripotent markers, and could differentiate into three germ layers. Moreover, the giPSCs differentiated into the trophectoderm lineage by spontaneous and directed differentiation in vitro. The giPSCs contributed to embryonic and extraembryonic tissue in preimplantation blastocysts and postimplantation chimeric embryos. RNA-sequencing analysis showed that the giPSCs were very close to goat embryos at the blastocyst stage and giPSCs have similar properties to typical extended PSCs (EPSCs). The establishment of giPSCs with LCDM provides a new way to generate PSCs from domestic animals and lays the foundation for basic and applied research in biology and agriculture.

[Establishment of anterior cruciate ligament reconstruction model in cynomolgus monkey with autogenous hamstring tendon transplantation]

Objective

To investigate the feasibility of establishing an anterior cruciate ligament (ACL) reconstruction model using hamstring tendon autograft in cynomolgus monkeys.

Methods

Twelve healthy adult male cynomolgus monkeys, weighing 8-13 kg, were randomly divided into two groups ( n=6). In the experimental group, the ACL reconstruction model of the right lower limb was prepared by using a single bundle of hamstring tendon, and the ACL of the right lower limb was only cut off in the control group. The survival of animals in the two groups was observed after operation. Before operation and at 3, 6, and 12 months after operation, the knee range of motion, thigh circumference, and calf circumference of the two groups were measured; the anterior tibial translation D-value (ATTD) was measured by Ligs joint ligament digital body examination instrument under the loads of 13-20 N, respectively. At the same time, the experimental group underwent MRI examination to observe the graft morphology and the signal/ noise quotient (SNQ) was caculated.

Results

All animals survived to the end of the experiment. In the experimental group, the knee range of motion, thigh circumference, and calf circumference decreased first and then gradually increased after operation; the above indexes were significantly lower at 3 and 6 months after operation than before operation ( P<0.05), and no significant difference was found between pre-operation and 12 months after operation ( P>0.05). In the control group, there was no significant change in knee range of motion after operation, showing no significant difference between pre- and post-operation ( P>0.05), but the thigh circumference and calf circumference gradually significantly decreased with time ( P<0.05), and the difference was significant when compared with those before operation ( P<0.05). At 6 and 12 months after operation, the thigh circumference and calf circumference were significantly larger in the experimental group than in the control group ( P<0.05). At 3 and 6 months after operation, the knee range of motion was significantly smaller in the experimental group than in the control group ( P<0.05). Under the loading condition of 13-20 N, the ATTD in the experimental group increased first and then decreased after operation; and the ATTD significantly increased at 3, 6 months after operation when compared with the value before operation ( P<0.05). But there was no significant difference between the pre-operation and 12 months after operation ( P>0.05). There was no significant change in ATTD in the control group at 3, 6, and 12 months after operation ( P>0.05), and which were significantly higher than those before operation ( P<0.05). At each time point after operation, the ATTD was significantly smaller in the experimental group than in the control group under the same load ( P<0.05). The MRI examination of the experimental group showed that the ACL boundary gradually became clear after reconstruction and was covered by the synovial membrane. The SNQ at each time point after operation was significantly higher than that before operation, but gradually decreased with time, and the differences between time points were significant ( P<0.05).

Conclusion

The ACL reconstruction model in cynomolgus monkey with autogenous hamstring tendon transplantation was successfully established.

A novel large animal model of posttraumatic osteoarthritis induced by inflammation with mechanical stability

OBJECTIVES

Animal models are needed to reliably separate the effects of mechanical joint instability and inflammation on posttraumatic osteoarthritis (PTOA) pathogenesis. We hypothesized that our modified intra-articular drilling (mIAD) procedure induces cartilage damage and synovial changes through increased inflammation without causing changes in gait.

METHODS

Twenty-four Yucatan minipigs were randomized into the mIAD (n=12) or sham control group (n=12). mIAD animals had two osseous tunnels drilled into each of the tibia and femur adjacent to the anterior cruciate ligament (ACL) attachment sites on the left hind knee. Surgical and contralateral limbs were harvested 15 weeks post-surgery. Cartilage degeneration was evaluated macroscopically and histologically. Synovial changes were evaluated histologically. Interleukin-1 beta (IL-1β), nuclear factor kappa B (NF-κB), and tumor necrosis factor alpha (TNF-α) mRNA expression levels in the synovial membrane were measured using quantitative real-time polymerase chain reaction. IL-1β and NF-κB levels in chondrocytes were assessed using immunohistochemistry. Load asymmetry during gait was recorded by a pressure-sensing walkway system before and after surgery.

RESULTS

The mIAD surgical knees demonstrated greater gross and histological cartilage damage than contralateral (P<.01) and sham knees (P<.05). Synovitis was present only in the mIAD surgical knee. Synovial inflammatory marker (IL-1β, NF-κB, and TNF-α) expression was three times higher in the mIAD surgical knee than the contralateral (P<.05). Chondrocyte IL-1β and NF-κB levels were highest in the mIAD surgical knee. In general, there were no significant changes in gait.

CONCLUSIONS

The mIAD model induced PTOA through inflammation without affecting gait mechanics. This large animal model has significant applications for evaluating the role of inflammation in PTOA and for developing therapies aimed at reducing inflammation following joint injury.

Responding to ACL Injury and its Treatments: Comparative Gene Expression between Articular Cartilage and Synovium

The relationship between cartilage and synovium is a rapidly growing area of osteoarthritis research. However, to the best of our knowledge, the relationships in gene expression between these two tissues have not been explored in mid-stage disease development. The current study compared the transcriptomes of these two tissues in a large animal model one year following posttraumatic osteoarthritis induction and multiple surgical treatment modalities. Thirty-six Yucatan minipigs underwent transection of the anterior cruciate ligament. Subjects were randomized to no further intervention, ligament reconstruction, or ligament repair augmented with an extracellular matrix (ECM) scaffold, followed by RNA sequencing of the articular cartilage and synovium at 52 weeks after harvest. Twelve intact contralateral knees served as controls. Across all treatment modalities, the primary difference in the transcriptomes was that the articular cartilage had greater upregulation of genes related to immune activation compared to the synovium-once baseline differences between cartilage and synovium were adjusted for. Oppositely, synovium featured greater upregulation of genes related to Wnt signaling compared to articular cartilage. After adjusting for expression differences between cartilage and synovium seen following ligament reconstruction, ligament repair with an ECM scaffold upregulated pathways related to ion homeostasis, tissue remodeling, and collagen catabolism in cartilage relative to synovium. These findings implicate inflammatory pathways within cartilage in the mid-stage development of posttraumatic osteoarthritis, independent of surgical treatment. Moreover, use of an ECM scaffold may exert a chondroprotective effect over gold-standard reconstruction through preferentially activating ion homeostatic and tissue remodeling pathways within cartilage.

Adaptation of Fibril-Reinforced Poroviscoelastic Properties in Rabbit Collateral Ligaments 8 Weeks After Anterior Cruciate Ligament Transection

Ligaments of the knee provide stability and prevent excessive motions of the joint. Rupture of the anterior cruciate ligament (ACL), a common sports injury, results in an altered loading environment for other tissues in the joint, likely leading to their mechanical adaptation. In the collateral ligaments, the patterns and mechanisms of biomechanical adaptation following ACL transection (ACLT) remain unknown. We aimed to characterize the adaptation of elastic and viscoelastic properties of the lateral and medial collateral ligaments eight weeks after ACLT. Unilateral ACLT was performed in six rabbits, and collateral ligaments were harvested from transected and contralateral knee joints after eight weeks, and from an intact control group (eight knees from four animals). The cross-sectional areas were measured with micro-computed tomography. Stepwise tensile stress-relaxation testing was conducted up to 6% final strain, and the elastic and viscoelastic properties were characterized with a fibril-reinforced poroviscoelastic material model. We found that the cross-sectional area of the collateral ligaments in the ACL transected knees increased, the nonlinear elastic collagen network modulus of the LCL decreased, and the amount of fast relaxation in the MCL decreased. Our results indicate that rupture of the ACL leads to an early adaptation of the elastic and viscoelastic properties of the collagen fibrillar network in the collateral ligaments. These adaptations may be important to consider when evaluating whole knee joint mechanics after ACL rupture, and the results aid in understanding the consequences of ACL rupture on other tissues.

Characterizing site-specific mechanical properties of knee cartilage with indentation-relaxation maps and machine learning

Knee cartilage experiences site-specific focal lesion and degeneration, which is likely associated with tissue inhomogeneity and nonuniform mechanical stimuli in the joint, for which a complete picture remains to be depicted. The present study aimed to develop a methodology to quantify knee cartilage inhomogeneity using porcine knee specimens. Automated indentation-relaxation and needle probing were performed on fully intact cartilage to obtain data that essentially represent continuous distributions of cartilage properties in the knee. Machine learning was then introduced to approximate the tissue inhomogeneity with several regions via clusters of indentation locations, and finite element modeling was used to obtain poromechanical properties for each region using indentation-relaxation and thickness data. Significant region dependence was established from the full time-dependent mechanical response. Seventeen regions, or clusters, were found to best approximate the site-specific poromechanical properties of articular cartilage for femoral groove, lateral and medial condyles and tibial plateaus, after up to eight clusters were tested for each of the five cartilage sections. The region partitions recommended, and tissue properties acquired would facilitate implementation of tissue inhomogeneity in future applications, e.g., contact modeling of the knee joint. The results obtained from 14 porcine knees revealed interesting region differences, for example, the two condyles have the same effective stiffness when responding to slowly applied mechanical loadings but substantially lower stiffness in the medial condyle when responding to fast loadings. This mechanical behavior may be associated with the fact that medial femoral cartilage is more prone to focal lesions than the lateral one.

Clinical Research Progress of Internal Brace Ligament Augmentation Technique in Knee Ligament Injury Repair and Reconstruction: A Narrative Review

Knee ligament injuries are most common in sports injuries. In general, ligament repair or reconstruction is necessary to restore the stability of the knee joint and prevent secondary injuries. Despite advances in ligament repair and reconstruction techniques, a number of patients still experience re-rupture of the graft and suboptimal recovery of motor function. Since Dr. Mackay's introduction of the internal brace technique, there has been continuous research in recent years using the internal brace ligament augmentation technique for knee ligament repair or reconstruction, particularly in the repair or reconstruction of the anterior cruciate ligament. This technique focuses on increasing the strength of autologous or allograft tendon grafts through the use of braided ultra-high-molecular-weight polyethylene suture tapes to facilitate postoperative rehabilitation and avoid re-rupture or failure. The purpose of this review is to present detailed research progress in the internal brace ligament enhancement technique of knee ligament injury repair as well as the reconstruction from biomechanical and histological research and clinical studies and to comprehensively assess the value of the application of this technique.

Collagen Fibril Diameter Distribution of Sheep Anterior Cruciate Ligament

The anterior cruciate ligament (ACL) tissue is a soft tissue connecting the femur and tibia at the knee joint and demonstrates a limited capacity for self-regeneration due to its low vascularity. The currently available clinical procedures are unable to fully restore damaged ACL tissue, and tissue engineering can offer options with a potential of restoring the torn/ruptured ACL by using biomimetic constructs that are similar to native tissue in terms of structure, composition, and functions. However, a model substrate to understand how the ACL cells regenerate the injured tissue is still not available. In this study, it is hypothesized that the nanofiber-based model substrate with bimodal and unimodal fiber diameter distributions will mimic the diameter distribution of collagen fibrils seen in healthy and injured sheep ACL, respectively. The aims were to (i) create an ACL injury in a sheep ACL by applying extensional force to rupture the healthy ACL tissue, (ii) measure the collagen fibril diameter distributions of healthy and injured ACL, (iii) fabricate polycaprolactone (PCL) nanofiber-based model constructs using electrospinning with diameter distributions similar to healthy and injured ACL tissue, and (iv) measure mechanical properties of ACL tissue and PCL electrospun constructs. The results showed that the fiber diameter distributions of PCL electrospun constructs and those of the healthy and injured ACL tissues were similar. The novelty in this investigation is that the collagen fibril diameter distribution of healthy and injured sheep ACL tissues was reported for the first time. The study is significant because it aims to create a model construct to solve an important orthopedic-related clinical problem affecting millions of people globally. The model construct fabricated in this work is expected to have an important impact on ACL regeneration efforts.

Ontogeny of the meniscus in the anuran Xenopus laevis

The anuran knee joint is subjected to the jump, one of the tetrapods' most demanding mechanical stresses. Consistent with this continuous effort, the knee of the anurans has a complex structure comparable to that of an amniote. Here, we describe the ontogeny of the Xenopus knee tissues and study the morphogenesis of the knee joint shape by performing a geometric morphometric analysis of specially selected anatomical structures: the menisci and the long bone epiphyses. A meniscus is a crescent-shaped fibrocartilaginous structure, with a triangular cross-section inserted between joints surfaces. A meniscus transmits load across the tibiofemoral joint by increasing congruity of the long bone epiphysis and decreasing the resulting stress exerted on the articular cartilage. We ask two questions: (1) what is the tissue composition along the ontogeny of the menisci of a swimming frog? (2) How do the menisci acquire the shape that will allow their adjustment? We studied the structures and tissue ontogeny of the knee of several specimens of Xenopus laevis and evaluated the congruity of the knee structures across the species ontogeny. Histological sections showed that the cavitation process responsible for separating the menisci and the epiphyses seems to be pivotal in shaping the conformity of these structures and the long bone epiphyses of the hindlimbs. The geometric morphometric analysis allowed us to interpret three phases of differentiation associated with limb functionality. The characteristic shape of the meniscus appears early in the ontogeny of the knee, simultaneously with the epiphysis contours.

Osteoarthritis animal models for biomaterial-assisted osteochondral regeneration

Clinical therapeutics for the regeneration of osteochondral defects (OCD) in the early stages of osteoarthritis remain an enormous challenge in orthopaedics. For in-depth studies of tissue engineering and regenerative medicine in terms of OCD treatment, the utility of an optimal OCD animal model is crucial for assessing the effects of implanted biomaterials on the repair of damaged osteochondral tissues. Currently, the most frequently used in vivo animal models for OCD regeneration include mice, rats, rabbits, dogs, pigs, goats, sheep, horses and nonhuman primates. However, there is no single "gold standard" animal model to accurately recapitulate human disease in all aspects, thus understanding the benefits and limitations of each animal model is critical for selecting the most suitable one. In this review, we aim to elaborate the complex pathological changes in osteoarthritic joints and to summarise the advantages and limitations of OCD animal models utilised for biomaterial testing along with the methodology of outcome assessment. Furthermore, we review the surgical procedures of OCD creation in different species, and the novel biomaterials that promote OCD regeneration. Above all, it provides a significant reference for selection of an appropriate animal model for use in preclinical in vivo studies of biomaterial-assisted osteochondral regeneration in osteoarthritic joints.

Ex vivo study correlating the stiffness of the ovine patellar tendon to age and weight

Tendons play a crucial role in the musculoskeletal system. In humans, tendon injuries, especially chronic tendinopathy, are very common and the patellar tendon is a frequent location for tendinopathy or injuries. The biomechanical characteristics of the patellar tendon, such as elasticity and stiffness, are of paramount importance and constitute major outcome measures in research studies. We aimed to assess whether the stiffness of the healthy ovine patellar tendon changes with age and weight in a population of normal animals. Sixty-eight 'patella-patellar tendon-tibial tuberosity' units from thirty-four Ile-de-France ewes of body mass 65 to 95 kg, euthanized for reasons other than musculoskeletal diseases, underwent a tensile test providing a measure of the tendon stiffness. Animals were sorted into three categories of age (1-2 yo, 3-5 yo, 6-10 yo). We found a positive but not significant correlation between age category and stiffness (r = 0.22, p = 0.27). There was a significantly positive correlation between weight and stiffness (r = 0.39, p = 0.04). In conclusion, the study characterized biomechanical properties of healthy tendons, provided useful reference values, and established the basis for future biomechanical tests on healing tendons in sheep. The most appropriate sheep population for those future studies would be non-overweight young adults presenting with no lameness.

The Biomechanical Stability of Bone Staples in Cortical Fixation of Tendon Grafts for Medial Collateral Ligament Reconstruction Depends on the Implant Design

BACKGROUND

The promising biomechanical stability of bone staples (BSs) in cortical fixation of tendon grafts for medial collateral ligament (MCL) reconstruction has been revealed by a previous investigation. However, it is currently unknown if the biomechanical stability of cortical fixation of tendon grafts depends on the BS design.

PURPOSE

To assess the biomechanical stability of cortical fixation of tendon grafts in knee surgery using 4 different BS designs.

STUDY DESIGN

Controlled laboratory study.

METHODS

Cortical fixation of tendon grafts was performed in a porcine knee model at the tibial insertion area of the MCL using 4 different BS designs (n = 40): 8-mm width without spikes (n = 10), 8-mm width with spikes (n = 10), 14-mm width with spikes (n = 10), and 13 mm-wide 4-prong staples with spikes (n = 10). Specimens were mounted in a materials testing machine, and cyclic loading was applied to the tendon graft (500 cycles at 50 and 100 N, respectively), followed by load-to-failure testing. The Kruskal-Wallis test was performed for statistical analysis (P < .05), and the post hoc Dunn test was performed for multiple comparisons.

RESULTS

In 4 of 10 specimens with graft fixation using BSs without spikes, slippage of the tendon underneath the BS led to failure of the construct during cyclic loading to 100 N. In the other groups, no fixation failure was observed during cyclic loading. Furthermore, graft fixation using BSs without spikes was found to have significantly more elongation during cyclic loading (8.2 ± 1.9 mm) and a lower ultimate failure load (170 ± 120 N) compared with graft fixation using narrow BSs with spikes (3.4 ± 1.2 mm [P < .0001] and 364 ± 85 N [P < .05], respectively) and graft fixation using broad BSs with spikes (4.5 ± 1.4 mm [P < .05] and 429 ± 67 N [P < .001], respectively). No statistical differences in elongation during cyclic loading or ultimate failure load were found between 4-prong staples with spikes (5.0 ± 1.3 mm and 304 ± 85 N) and narrow or broad staples with spikes.

CONCLUSION

The biomechanical stability of cortical fixation of an MCL graft was comparable between each BS design with spikes (narrow, broad, and 4-prong) in a porcine knee model, whereas BSs without spikes led to failure of the fixation construct during cyclic loading in 4 of 10 specimens and increased elongation and lower ultimate failure loads in the remainder of the group. BSs without spikes may therefore not be recommended for graft fixation.

CLINICAL RELEVANCE

The use of BSs can help to avoid the conflict of converging tunnels in multiligament reconstruction surgery. An implant design with spikes yields significantly higher biomechanical stability than BSs without spikes.

A wear model to predict damage of reconstructed ACL

Impingement with surrounding tissues is a major cause of failure of anterior cruciate ligament reconstruction. However, the complexity of the knee kinematics and anatomical variations make it difficult to predict the occurrence of contact and the extent of the resulting damage. Here we hypothesise that a description of wear between the reconstructed ligament and adjacent structures captures the in vivo damage produced with physiological loadings. To test this, we performed an in vivo study on a sheep model and investigated the role of different sources of damage: overstretching, excessive twist, excessive compression, and wear. Seven sheep underwent cranial cruciate ligament reconstruction using a tendon autograft. Necropsy observations and pull-out force measurements performed postoperatively at three months showed high variability across specimens of the extent and location of graft damage. Using 3D digital models of each stifle based on X-ray imaging and kinematics measurements, we determined the relative displacements between the graft and the surrounding bones and computed a wear index describing the work of friction forces underwent by the graft during a full flexion-extension movement. While tensile strain, angle of twist and impingement volume showed no correlation with pull-out force (ρ = -0.321, p = 0.498), the wear index showed a strong negative correlation (r = -0.902, p = 0.006). Moreover, contour maps showing the distribution of wear on the graft were consistent with the observations of damage during the necropsy. These results demonstrate that wear is a good proxy of graft damage. The proposed wear index could be used in implant design and surgery planning to minimise the risk of implant failure. Its application to sheep can provide a way to increase preclinical testing efficiency.

Comparison of the morphology of the anterior cruciate ligament and related bony structures between pigs and humans

INTRODUCTION

Pigs are widely used for clinical research on the anterior cruciate ligament (ACL) because of the similarity of the knee structure to the human knee. But evidence to support the suitability of using porcine samples to guide clinical practices is limited. This study aims to explore the qualitative and quantitative morphological features of the porcine knee and ACL, and to compare these with data on humans reported in literature.

METHODS

Nineteen porcine knees were used for this study. The bone structures were measured on coronal X-ray images. The length of the ACL was measured using a caliper. The ACL bone insertion sites were marked and measured on a digital photograph. The lengths of the long and short axis of the ACL isthmus were measured on the X-ray microscopy reconstructed images. The outcomes were compared with previously reported data on humans using an abstract independent-samples T test.

RESULTS

Qualitative observation indicated a similar location, orientation and general morphology of the porcine ACL to human ACLs. The major difference was the location of the ACL tibial insertion with respect to the anterior horn of the lateral meniscus (AHLM). The porcine ACL was split into AM and PL bundles by the AHLM, while the AHLM was adjacent to the anterolateral border of the ACL tibial insertion in human knees. The quantitative comparison showed no significant difference between the human and porcine ACL in terms of the length of the ACL, the width of the femoral condyle and tibial plateau, and the tibial interspinal width. However, the CSA, the lengths of the long and short axis of the ACL isthmus, and the femoral and tibial insertion areas of the porcine ACL were all significantly larger than the reported features in human knees.

CONCLUSION

The location, orientation and basic morphology of the porcine ACL and knee are similar to humans. However, the two-bundle structure is more distinct in a porcine ACL, and the dimensions of the porcine ACL are generally larger. This study may provide useful information to researchers when assessing the feasibility and limitations of using porcine samples for research on the human ACL and knee.

Animal Models of Osteoarthritis Part 1-Preclinical Small Animal Models: Challenges and Opportunities for Drug Development

Osteoarthritis (OA) is the most common form of arthritis and a major source of pain and disability in the adult population. There is a significant unmet medical need for the development of effective pharmacological therapies for the treatment of OA. In addition to spontaneously occurring animal models of OA, many experimental animal models have been developed to provide insights into mechanisms of pathogenesis and progression. Many of these animal models are also being used in the drug development pipeline. Here, we provide an overview of commonly used and emerging preclinical small animal models of OA and highlight the strengths and limitations of small animal models in the context of translational drug development. There is limited information in the published literature regarding the technical reliability of these small animal models and their ability to accurately predict clinical drug development outcomes. The cost and complexity of the available models however is an important consideration for pharmaceutical companies, biotechnology startups, and contract research organizations wishing to incorporate preclinical models in target validation, discovery, and development pipelines. Further considerations relevant to industry include timelines, methods of induction, the key issue of reproducibility, and appropriate outcome measures needed to objectively assess outcomes of experimental therapeutics. Preclinical small animal models are indispensable tools that will shine some light on the pathogenesis of OA and its molecular endotypes in the context of drug development. This paper will focus on small animal models used in preclinical OA research. © 2022 The Authors. Current Protocols published by Wiley Periodicals LLC.

Updates on mesenchymal stem cell therapies for articular cartilage regeneration in large animal models

There is an unmet need for novel and efficacious therapeutics for regenerating injured articular cartilage in progressive osteoarthritis (OA) and/or trauma. Mesenchymal stem cells (MSCs) are particularly promising for their chondrogenic differentiation, local healing environment modulation, and tissue- and organism-specific activity; however, despite early in vivo success, MSCs require further investigation in highly-translatable models prior to disseminated clinical usage. Large animal models, such as canine, porcine, ruminant, and equine models, are particularly valuable for studying allogenic and xenogenic human MSCs in a human-like osteochondral microenvironment, and thus play a critical role in identifying promising approaches for subsequent clinical investigation. In this mini-review, we focus on [1] considerations for MSC-harnessing studies in each large animal model, [2] source tissues and organisms of MSCs for large animal studies, and [3] tissue engineering strategies for optimizing MSC-based cartilage regeneration in large animal models, with a focus on research published within the last 5 years. We also highlight the dearth of standard assessments and protocols regarding several crucial aspects of MSC-harnessing cartilage regeneration in large animal models, and call for further research to maximize the translatability of future MSC findings.

Small laboratory animal models of anterior cruciate ligament reconstruction

Anterior cruciate ligament (ACL) injuries are common knee ligament injuries. While generally successful, ACL reconstruction that uses a tendon graft to stabilize the knee is still associated with a notable percentage of failures and long-term morbidities. Preclinical research that uses small laboratory species (i.e., mice, rats, and rabbits) to model ACL reconstruction are important to evaluate factors that can impact graft incorporation or posttraumatic osteoarthritis after ACL reconstruction. Small animal ACL reconstruction models are also used for proof-of-concept studies for the development of emerging biological strategies aimed at improving ACL reconstruction healing. The objective of this review is to provide an overview on the use of common small animal laboratory species to model ACL reconstruction. The review includes a discussion on comparative knee anatomy, technical considerations including types of tendon grafts employed amongst the small laboratory species (i.e., mice, rats, and rabbits), and common laboratory evaluative methods used to study healing and outcomes after ACL reconstruction in small laboratory animals. The review will also highlight common research questions addressed with small animal models of ACL reconstruction.

Navigating regulatory pathways for translation of biologic cartilage repair products

Long-term clinical repair of articular cartilage remains elusive despite advances in cartilage tissue engineering. Only one cartilage repair therapy classified as a "cellular and gene therapy product" has obtained Food and Drug Administration (FDA) approval within the past decade although more than 200 large animal cartilage repair studies were published. Here, we identify the challenges impeding translation of strategies and technologies for cell-based cartilage repair, such as the disconnect between university funding and regulatory requirements. Understanding the barriers to translation and developing solutions to address them will be critical for advancing cell therapy products for cartilage repair to clinical use.

Role of animal models in biomedical research: a review

The animal model deals with the species other than the human, as it can imitate the disease progression, its’ diagnosis as well as a treatment similar to human. Discovery of a drug and/or component, equipment, their toxicological studies, dose, side effects are in vivo studied for future use in humans considering its’ ethical issues. Here lies the importance of the animal model for its enormous use in biomedical research. Animal models have many facets that mimic various disease conditions in humans like systemic autoimmune diseases, rheumatoid arthritis, epilepsy, Alzheimer’s disease, cardiovascular diseases, Atherosclerosis, diabetes, etc., and many more. Besides, the model has tremendous importance in drug development, development of medical devices, tissue engineering, wound healing, and bone and cartilage regeneration studies, as a model in vascular surgeries as well as the model for vertebral disc regeneration surgery. Though, all the models have some advantages as well as challenges, but, present review has emphasized the importance of various small and large animal models in pharmaceutical drug development, transgenic animal models, models for medical device developments, studies for various human diseases, bone and cartilage regeneration model, diabetic and burn wound model as well as surgical models like vascular surgeries and surgeries for intervertebral disc degeneration considering all the ethical issues of that specific animal model. Despite, the process of using the animal model has facilitated researchers to carry out the researches that would have been impossible to accomplish in human considering the ethical prohibitions.

Effects of Male and Female Sex on the Development of Posttraumatic Osteoarthritis in the Porcine Knee After Anterior Cruciate Ligament Surgery

BACKGROUND

Posttraumatic osteoarthritis (PTOA) is a common sequela of anterior cruciate ligament (ACL) injury, even when surgical treatment is selected. The effect of patient sex on cartilage health after ACL injury and surgical treatment has been less studied.

PURPOSE/HYPOTHESIS

The study objective was to compare the macroscopic cartilage damage that develops after ACL surgery in male and female Yucatan minipigs. It was hypothesized that after ACL surgery, the macroscopic cartilage damage of the tibiofemoral joints from female animals would be greater than that from male animals. Additionally, it was hypothesized that the effect of sex on the macroscopic cartilage damage would depend on surgical treatment.

STUDY DESIGN

Controlled laboratory study.

METHODS

Twelve-month follow-up data were obtained for 55 adolescent Yucatan minipigs (22 female/33 male) that were randomized to 1 of 3 experimental groups: no treatment (ACL transection [ACLT]), ACL reconstruction, and bridge-enhanced ACL restoration. The Osteoarthritis Research Society International guidelines were used to determine a standardized macroscopic cartilage damage score on 5 surfaces of the knee joint.

RESULTS

Females had significantly worse mean total macroscopic cartilage damage scores on the surgical side (adjusted P value [P adj] = .04) and significantly better scores on the contralateral side (P adj = .01) when compared with males. The trochlear damage scores were also significantly worse in females for surgical limbs (P adj = .009) and significantly better for the contralateral limbs (P adj < .001) when compared with males. Although there were no significant differences in total macroscopic cartilage damage scores between sexes within treatment groups on the surgical limbs (ACLT, P adj = 0.45; ACL reconstruction, P adj = .56; bridge-enhanced ACL restoration, P adj = .23), the mean trochlear scores on the surgical limb of females were significantly worse than those of the males in the ACLT group (P adj = .003).

CONCLUSION

Mean total macroscopic cartilage damage scores of Yucatan minipigs were significantly worse in females than males, regardless of treatment. These differences were predominantly found in the trochlear scores across all treatment groups.

CLINICAL RELEVANCE

These data suggest that patient sex could be more influential in the progression of PTOA than surgical treatment after ACL injury. Identifying factors responsible for this discrepancy may prove valuable to identify targets to slow PTOA progression in male and female ACL-injured populations.

Anatomical features for an adequate choice of the experimental animal model in biomedicine: III. Ferret, goat, sheep, and horse

The anatomical characteristics of each of the many species today employed in biomedical research are very important when selecting the correct animal model(s), especially for conducting translational research. In previous papers, these features have been considered for fish (D'Angelo et al. Ann. Anat, 2016, 205:75), the most common laboratory rodents, rabbits, and pigs (Lossi et al. 2016). I here follow this line of discussion by dealing with the importance of proper knowledge of ferrets, goats, sheep, and horses' main anatomical features in translational research.

Meniscal Displacement and Loss of Load-Transmission Function After Radial Tear of the Lateral Meniscus in a Porcine Model: New Insights Into the Functional Dynamics of the Injured Meniscus

BACKGROUND

Meniscal extrusion/translation has been used as an index for meniscal treatment. However, the relationship between meniscal displacement and the degree of meniscal tear or load-transmission function of the lateral meniscus (LM) remains unclear.

PURPOSE

To clarify the relationship between the width of the radial tear of the LM and (1) meniscal displacement or (2) resultant force through the meniscus under axial compressive load in the porcine model.

STUDY DESIGN

Controlled laboratory study.

METHODS

Eight intact porcine knees with or without a partial radial tear at the midbody of the LM (involving 30%, 60%, or 90% of its width) were investigated. Reflective markers were attached to the outer wall of the anterior, anteromiddle, posteromiddle, and posterior segments of the LM. A 300-N axial load was applied at 2 flexion angles (30° and 60°), and the 3-dimensional forces and trajectories of the knees were recorded. Marker movements were simultaneously tracked using a motion capture camera system. After total meniscectomy of the LM, the recorded knee trajectories were reproduced, and the resultant force through the LM was calculated (a force carried only by the meniscus in response to a load applied to the whole knee joint).

RESULTS

At both flexion angles, the change in distance (mean ± SD) between the anterior and posterior markers under load increased significantly more in the anteroposterior direction in LMs with a 90% tear than in intact LMs (30°, 0.4 ± 0.3 vs 1.4 ± 0.8 mm, P = .004; 60°, 0.1 ± 0.7 vs 1.4 ± 1.0 mm, P < .001 [intact vs 90% tear]). The change in distance between the anteromiddle and posteromiddle markers at 30° also significantly increased in LMs with a 90% tear (0.2 ± 0.2 vs 1.3 ± 1.2 mm, P = .02 [intact vs 90% tear]). The resultant force was significantly lower in LMs with a 90% tear than in intact LMs (30°, 125 ± 47 vs 48 ± 20 N, P < .001; 60°, 93 ± 46 vs 43 ± 11 N, P = .002 [intact vs 90% tear]). We found no significant differences in either meniscal displacements or resultant forces between intact LMs and those with 30% or 60% tears.

CONCLUSION

LMs with a 90%-width midbody radial tear lost load-transmission function with their displacement relative to the tibia primarily in the anteroposterior direction in the porcine model.

CLINICAL RELEVANCE

Even 1 mm of displacement after meniscal injury is evidence that the load-transmission function of the meniscus is greatly impaired. When a displaced torn LM is diagnosed in preoperative imaging, meniscal repair surgery should be considered.

Biomechanical analysis of a centralization procedure for extruded lateral meniscus after meniscectomy in porcine knee joints

The recently developed arthroscopic centralization for lateral meniscal extrusion has obtained satisfactory short-term clinical and radiological results and improves the meniscus biomechanical properties. However, the effectiveness of treatment for meniscus extrusion after partial meniscectomy still requires elucidation. This study investigated the effect of centralization with modifications from a mechanical viewpoint. Porcine knee joints (N = 6) were set in a universal tester under the following conditions: (1) Intact; (2) Meniscectomy: Inner half of the posterior half meniscus was removed; (3) Extrusion: Posterior meniscus was dislocated laterally by transecting the posterior root and the meniscotibial ligament; (4) Centralization-1: Centralization procedure using one anchor; (5) Centralization-2: Centralization procedure using two anchors; and (6) Centralization-ad: Centralization with capsular advancement using two anchors. Load distributions and contact pressure in the meniscus and tibial cartilage were evaluated with an axial compressive force of 200 N. After meniscectomy, the tibial cartilage load increased and that of the medial margin of the posterior part of the meniscus decreased. When the meniscus was extruded, the load was concentrated only on the tibial cartilage. Centralization-1 increased the load on the meniscus, while Centralization-2 further increased the meniscus load but decreased the tibial cartilage load. Centralization-ad further decreased the load on the tibial plateau. The average contact pressure of the tibial cartilage was significantly higher in the Extrusion group than in the Intact group or the Centralization-ad group. From a biomechanical viewpoint, centralization with capsular advancement was the most effective of the tested procedures for treatment for an extruded meniscus after partial meniscectomy.

Proteomic, mechanical, and biochemical characterization of cartilage development

The objective of this work is to examine the development of porcine cartilage by analyzing its mechanical properties, biochemical content, and proteomics at different developmental stages. Cartilage from the knees of fetal, neonatal, juvenile, and mature pigs was analyzed using histology, mechanical testing, biochemical assays, fluorophore-assisted carbohydrate electrophoresis, and bottom-up proteomics. Mature cartilage has 2.2-times the collagen per dry weight of fetal cartilage, and fetal cartilage has 2.1-times and 17.9-times the glycosaminoglycan and DNA per dry weight of mature cartilage, respectively. Tensile and compressive properties peak in the juvenile stage, with a tensile modulus 4.7-times that of neonatal. Proteomics analysis reveals increases in collagen types II and III, while collagen types IX, XI, and XIV, and aggrecan decrease with age. For example, collagen types IX and XI decrease 9.4-times and 5.1-times, respectively from fetal to mature. Mechanical and biochemical measurements have their greatest developmental changes between the neonatal and juvenile stages, where mechanotransduction plays a major role. Bottom-up proteomics serves as a powerful tool for tissue characterization, showing results beyond those of routine biochemical analysis. For example, proteomic analysis shows significant drops in collagen types IX, XI, and XIV throughout development, which shows insight into the permanence of cartilage's matrix. Changes in overall glycosaminoglycan content compared to aggrecan and link protein indicate non-enzymatic degradation of aggrecan structures or hyaluronan in mature cartilage. In addition to tissue characterization, bottom-up proteomics techniques are critical in tissue engineering efforts toward repair or regeneration of cartilage in animal models. STATEMENT OF SIGNIFICANCE: In this study, the development of porcine articular cartilage is interrogated through biomechanical, biochemical, and proteomic techniques, to determine how mechanics and extracellular matrix composition change from fetal to mature cartilage. For the first time, a bottom-up proteomics approach is used to reveal a wide variety of protein changes through aging; for example, the collagen subtype composition of the cartilage increases in collagen types II and III, and decreases in collagen types IX, XI, and XIV. This analysis shows that bottom-up proteomics is a critical tool in tissue characterization, especially toward developing a deeper understanding of matrix composition and development in tissue engineering studies.

Evaluating the Efficacy of Combined P188 Treatment and Surgical Intervention in Preventing Post-Traumatic Osteoarthritis Following a Traumatic Knee Injury

Previous studies have shown that reconstructive surgery alone following injury to the anterior cruciate ligament (ACL) does not prevent the development of post-traumatic osteoarthritis (PTOA). Poloxamer 188 (P188) has been shown to prevent cell death following trauma in both articular cartilage and meniscal tissue. This study aims to test the efficacy of single or multiple administrations of P188 in conjunction with reconstructive surgery to help prevent or delay the onset of the disease. Thirty skeletally mature rabbits underwent closed-joint trauma that resulted in ACL rupture and meniscal damage and were randomly assigned to one of four treatment groups with varying doses of P188. ACL reconstruction was then performed using an autograft from the semitendinosus tendon. Animals were euthanized 1-month following trauma, meniscal tissue was assessed for changes in morphology, mechanical properties, and proteoglycan content. Femurs and tibias were scanned using microcomputed tomography to determine changes in bone quality, architecture, and osteophyte formation. The medial meniscus experienced more damage and a decrease in the instantaneous modulus regardless of treatment group, while P188 treatment tended to limit degenerative changes in the lateral meniscus. Both lateral and medial menisci had documented decreases in the equilibrium modulus and inconsistent changes in proteoglycan content. Minimal changes were documented in the tibias and femurs, with the only significant change being the formation of osteophytes in both bones regardless of treatment group. The data suggest that P188 was able to limit some degenerative changes in the meniscus associated with PTOA and may warrant future studies.

The Application of Extracellular Vesicles Mediated miRNAs in Osteoarthritis: Current Knowledge and Perspective

Osteoarthritis (OA) is a whole joint disease characterized by synovitis, cartilage destruction, and subchondral bone sclerosis and cyst. Despite decades’ study, effective treatment is rare for this chronic disease. Extracellular vesicles (EVs), including exosomes, microvesicles, and apoptosis bodies, are nano-sized vesicles with a cargo containing biologically active agents, such as nucleic acids, lipids, and proteins. As a group of short non-coding RNAs, microRNAs (miRNAs) can be delivered by parental cells secreted EVs. Negatively regulate the target mRNAs at the posttranscriptional level and regulate gene expression in recipient cells without modifying gene sequence. Recently, most studies focused on the function of EVs mediated miRNAs in the pathophysiological process of OA. However, all kinds of EVs specific and OA specific factors might influence the administration of EVs-miRNAs, especially the precise quantitative management. As a result, the flourishing of current research about EVs in the laboratory might not promote the relevant clinical transformation in OA treatment. In this review, we reviewed the present application of EVs-miRNAs in the therapeutic of OA and further analyzed the potential factors that might influence its application. Further progress in the quantitative management of EVs-miRNAs would accelerate the clinical transformation of miRNAs enriched EVs in the OA field.

The Cell-Material Interaction in the Replacement and Regeneration of the Meniscus: A Mini-Review

The meniscus is a part of the knee joint consisting of a medial and lateral component between the femoral condyles and the tibial plateau. Meniscal tears usually happen in younger and active people due to sports or daily activities. Some approaches are chosen for meniscus replacement and regeneration from the problems above, such as meniscal repair, meniscal allograft transplantation, gene therapy techniques, and tissue engineering techniques. Biomaterials and tissue engineering have a primary role in meniscus regeneration and replacement. The cell-material interactions are influenced by the biomaterials' design, structure, and composition to promote the growth o meniscus tissue. This study aims to give a brief review of the cell-material interaction in the replacement and regeneration process of the meniscus. Based on several studies, the use of growth factors in the meniscal regeneration and replacement could modulate and promote angiogenesis, differentiation, and cell migration beneficial in the repair process of the meniscus. Furthermore, combining the Mesenchymal Stem Cells and growth factors in healing the meniscal tears could be one of the best approaches to obtaining the new tissue resembling the meniscal tissue. The follow-up and long-term studies in meniscus regeneration and replacement are needed and recommended, especially implanting with good chondroprotective and long-term evaluation to obtain the best properties similar to the natural meniscus.

Consequences of Progressive Full-Thickness Focal Chondral Defects Involving the Medial and Lateral Femoral Condyles After Meniscectomy: A Biomechanical Study Using a Goat Model

Background:

Full-thickness chondral defects alter tibiofemoral joint homeostasis and, if left untreated, have the potential to progress to osteoarthritis.

Purpose:

To assess the effects of isolated and dual full-thickness chondral defect size and location on the biomechanical properties of the lateral femoral condyle (LFC) and medial femoral condyle (MFC) during dynamic knee flexion in goat knees without menisci.

Methods:

In 12 goat knees, we created progressively increasing full-thickness circular chondral defects (3-, 5-, and 7.5-mm diameter) in the weightbearing contact area of flexion and extension in the MFC, the LFC, or both. Each knee was fixed into a custom steel frame and attached to a motor with sensors inserted intra-articularly. For each testing condition, the knee was loaded to 100 N and underwent a dynamic range of motion between 90° of flexion and 30° of extension. The following parameters were collected: contact area, contact pressure, contact force, peak area, and peak pressure.

Study Design:

Controlled laboratory study.

Results:

The peak pressure at the defect rim of the MFC at full extension increased by 51.51% from no defect (1.887 MPa) to a 7.5-mm defect (2.859 MPa) (P < .001), and the peak pressure at the defect rim of the LFC at full extension increased by 139.14% from no defect (1.704 MPa) to a 7.5-mm defect (4.075 MPa) (P < .001). The peak pressures for LFC defects at all 3 diameters were significantly greater when compared with dual defects consisting of increasing LFC defect diameter and constant MFC defect diameter (P < .001 for all).

Conclusion:

Extremely large increases in peak pressure were seen at the rim of articular cartilage defects when evaluated under dynamic loading conditions. Isolated LFC defects experienced a greater increase in defect rim stress concentrations when compared with isolated MFC defects for equivalent increases in defect size. Defect size played a significant role independent of location for peak pressures on the MFC and LFC.

Clinical Relevance:

Significant rim-loading effects increase with defect size under dynamic loading and may result in increasingly rapid progression of articular cartilage lesions. Within the context of this goat model, findings suggest that lateral compartment chondral lesions are more likely to progress than medial compartment lesions of equivalent size.

Knee Joint Menisci Are Shock Absorbers: A Biomechanical In-Vitro Study on Porcine Stifle Joints

The aim of this biomechanical in vitro study was to answer the question whether the meniscus acts as a shock absorber in the knee joint or not. The soft tissue of fourteen porcine knee joints was removed, leaving the capsuloligamentous structures intact. The joints were mounted in 45° neutral knee flexion in a previously validated droptower setup. Six joints were exposed to an impact load of 3.54 J, and the resultant loss factor (η) was calculated. Then, the setup was modified to allow sinusoidal loading under dynamic mechanical analysis (DMA) conditions. The remaining eight knee joints were exposed to 10 frequencies ranging from 0.1 to 5 Hz at a static load of 1210 N and a superimposed sinusoidal load of 910 N (2.12 times body weight). Forces (F) and deformation (l) were continuously recorded, and the loss factor (tan δ) was calculated. For both experiments, four meniscus states (intact, medial posterior root avulsion, medial meniscectomy, and total lateral and medial meniscectomy) were investigated. During the droptower experiments, the intact state indicated a loss factor of η = 0.1. Except for the root avulsion state (−15%, p = 0.12), the loss factor decreased (p &lt; 0.046) up to 68% for the total meniscectomy state (p = 0.028) when compared to the intact state. Sinusoidal DMA testing revealed that knees with an intact meniscus had the highest loss factors, ranging from 0.10 to 0.15. Any surgical manipulation lowered the damping ability: Medial meniscectomy resulted in a reduction of 24%, while the resection of both menisci lowered tan δ by 18% compared to the intact state. This biomechanical in vitro study indicates that the shock-absorbing ability of a knee joint is lower when meniscal tissue is resected. In other words, the meniscus contributes to the shock absorption of the knee joint not only during impact loads, but also during sinusoidal loads. The findings may have an impact on the rehabilitation of young, meniscectomized patients who want to return to sports. Consequently, such patients are exposed to critical loads on the articular cartilage, especially when performing sports with recurring impact loads transmitted through the knee joint surfaces.