Effects of compressive force on the differentiation of pluripotent mesenchymal cells

Effects of different physical factors on osteogenic differentiation

Osteoblasts are essential for bone formation and can perceive external mechanical stimuli, which are translated into biochemical responses that ultimately alter cell phenotypes and respond to environmental stimuli, described as mechanical transduction. These cells actively participate in osteogenesis and the formation and mineralisation of the extracellular bone matrix. This review summarises the basic physiological and biological mechanisms of five different physical stimuli, i.e. light, electricity, magnetism, force and sound, to induce osteogenesis; further, it summarises the effects of changing culture conditions on the morphology, structure and function of osteoblasts. These findings may provide a theoretical basis for further studies on bone physiology and pathology at the cytological level and will be useful in the clinical application of bone formation and bone regeneration technology.

Acute Inflammatory Response in Osteoporotic Fracture Healing Augmented with Mechanical Stimulation is Regulated In Vivo through the p38-MAPK Pathway

Low-magnitude high-frequency vibration (LMHFV) has previously been reported to modulate the acute inflammatory response of ovariectomy-induced osteoporotic fracture healing. However, the underlying mechanisms are not clear. In the present study, we investigated the effect of LMHFV on the inflammatory response and the role of the p38 MAPK mechanical signaling pathway in macrophages during the healing process. A closed femoral fracture SD rat model was used. In vivo results showed that LMHFV enhanced activation of the p38 MAPK pathway at the fracture site. The acute inflammatory response, expression of inflammatory cytokines, and callus formation were suppressed in vivo by p38 MAPK inhibition. However, LMHFV did not show direct in vitro enhancement effects on the polarization of RAW264.7 macrophage from the M1 to M2 phenotype, but instead promoted macrophage enlargement and transformation to dendritic monocytes. The present study demonstrated that p38 MAPK modulated the enhancement effects of mechanical stimulation in vivo only. LMHFV may not have exerted its enhancement effects directly on macrophage, but the exact mechanism may have taken a different pathway that requires further investigation in the various subsets of immune cells.

Superior Osteo-Inductive and Osteo-Conductive Properties of Trabecular Titanium vs. PEEK Scaffolds on Human Mesenchymal Stem Cells: A Proof of Concept for the Use of Fusion Cages

Fusion cages composed of titanium and its alloys are emerging as valuable alternative to standard polyetheretherketone (PEEK) ones routinely used in cervical and lumbar spine surgery. Aim of this study was to evaluate osteo-inductive and osteo-conductive ability of an innovative trabecular titanium (T-Ti) scaffold on human mesenchymal stem cells (hMSCs), in both absence and presence of biochemical osteogenic stimuli. Same abilities were assessed on PEEK and standard 2D plastic surface, the latter meant as gold-standard for in vitro differentiation studies. hMSCs adhered and colonized both T-Ti and PEEK scaffolds. In absence of osteogenic factors, T-Ti triggered osteogenic induction of MSCs, as demonstrated by alkaline phosphatase activity and calcium deposition increments, while PEEK and standard 2D did not. Addition of osteogenic stimuli reinforced osteogenic differentiation of hMSCs cultured on T-Ti in a significantly higher manner with respect to standard 2D plastic culture surfaces, whereas PEEK almost completely abolished the process. T-Ti driven differentiation towards osteoblasts was confirmed by gene and marker expression analyses, even in absence of osteogenic stimuli. These results clearly indicate superior in vitro osteo-inductive and osteo-conductive capacity of T-Ti compared to PEEK, and make ground for further studies supporting the use of T-Ti cages to improve bone fusion.

Mechanical loading and the control of stem cell behavior

OBJECTIVE

Mechanical stimulation regulates many cell responses. The present study describes the effects of different in vitro mechanical stimulation approaches on stem cell behavior.

DESIGN

The narrative review approach was performed. The articles published in English language that addressed the effects of mechanical force on stem cells were searched on Pubmed and Scopus database. The effects of extrinsic mechanical force on stem cell response was reviewed and discussed.

RESULTS

Cells sense mechanical stimuli by the function of mechanoreceptors and further transduce force stimulation into intracellular signaling. Cell responses to mechanical stimuli depend on several factors including type, magnitude, and duration. Further, similar mechanical stimuli exhibit distinct cell responses based on numerous factors including cell type and differentiation stage. Various mechanical applications modulate stemness maintenance and cell differentiation toward specific lineages.

CONCLUSIONS

Mechanical force application modulates stemness maintenance and differentiation. Modification of force regimens could be utilized to precisely control appropriate stem cell behavior toward specific applications.

Nanomaterials-based Cell Osteogenic Differentiation and Bone Regeneration

With the rapid development of nanotechnology, various nanomaterials have been applied to bone repair and regeneration. Due to the unique chemical, physical and mechanical properties, nanomaterials could promote stem cells osteogenic differentiation, which has great potentials in bone tissue engineering and exploiting nanomaterials-based bone regeneration strategies. In this review, we summarized current nanomaterials with osteo-induction ability, which could be potentially applied to bone tissue engineering. Meanwhile, the unique properties of these nanomaterials and their effects on stem cell osteogenic differentiation are also discussed. Furthermore, possible signaling pathways involved in the nanomaterials- induced cell osteogenic differentiation are also highlighted in this review.

Mechanical regulation of nucleocytoplasmic translocation in mesenchymal stem cells: characterization and methods for investigation

Mesenchymal stem cells (MSCs) have immune-modulatory and tissue-regenerative properties that make them a suitable and promising tool for cell-based therapy application. Since the bio-chemo-mechanical environment influences MSC fate and behavior, the understanding of the mechanosensors involved in the transduction of mechanical inputs into chemical signals could be pivotal. In this context, the nuclear pore complex is a molecular machinery that is believed to have a key role in force transmission and in nucleocytoplasmic shuttling regulation. To fully understand the nuclear pore complex role and the nucleocytoplasmic transport dynamics, recent advancements in fluorescence microscopy provided the possibility to study passive and facilitated nuclear transports also in mechanically stimulated cell culture conditions. Here, we review the current available methods for the investigation of nucleocytoplasmic shuttling, including photo-perturbation-based approaches, fluorescence correlation spectroscopy, and single-particle tracking techniques. For each method, we analyze the advantages, disadvantages, and technical limitations. Finally, we summarize the recent knowledge on mechanical regulation of nucleocytoplasmic translocation in MSC, the relevant progresses made so far, and the future perspectives in the field.

Transfection of the IHH gene into rabbit BMSCs in a simulated microgravity environment promotes chondrogenic differentiation and inhibits cartilage aging

The effect of overexpressing the Indian hedgehog (IHH) gene on the chondrogenic differentiation of rabbit bone marrow-derived mesenchymal stem cells (BMSCs) was investigated in a simulated microgravity environment. An adenovirus plasmid encoding the rabbit IHH gene was constructed in vitro and transfected into rabbit BMSCs. Two large groups were used: conventional cell culture and induction model group and simulated microgravity environment group. Each large group was further divided into blank control group, GFP transfection group, and IHH transfection group. During differentiation induction, the expression levels of cartilage-related and cartilage hypertrophy-related genes and proteins in each group were determined. In the conventional model, the IHH transfection group expressed high levels of cartilage-related factors (Coll2 and ANCN) at the early stage of differentiation induction and expressed high levels of cartilage hypertrophy-related factors (Coll10, annexin 5, and ALP) at the late stage. Under the simulated microgravity environment, the IHH transfection group expressed high levels of cartilage-related factors and low levels of cartilage hypertrophy-related factors at all stages of differentiation induction. Under the simulated microgravity environment, transfection of the IHH gene into BMSCs effectively promoted the generation of cartilage and inhibited cartilage aging and osteogenesis. Therefore, this technique is suitable for cartilage tissue engineering.

Stress Analysis-Driven Design of Bilayered Scaffolds for Tissue-Engineered Vascular Grafts

Continuing advances in the fabrication of scaffolds for tissue-engineered vascular grafts (TEVGs) are greatly expanding the scope of potential designs. Increasing recognition of the importance of local biomechanical cues for cell-mediated neotissue formation, neovessel growth, and subsequent remodeling is similarly influencing the design process. This study examines directly the potential effects of different combinations of key geometric and material properties of polymeric scaffolds on the initial mechanical state of an implanted graft into which cells are seeded or migrate. Toward this end, we developed a bilayered computational model that accounts for layer-specific thickness and stiffness as well as the potential to be residually stressed during fabrication or to swell during implantation. We found that, for realistic ranges of parameter values, the circumferential stress that would be presented to seeded or infiltrating cells is typically much lower than ideal, often by an order of magnitude. Indeed, accounting for layer-specific intrinsic swelling resulting from hydrophilicity or residual stresses not relieved via annealing revealed potentially large compressive stresses, which could lead to unintended cell phenotypes and associated maladaptive growth or, in extreme cases, graft failure. Metrics of global hemodynamics were also found to be inversely related to markers of a favorable local mechanobiological environment, suggesting a tradeoff in designs that seek mechanical homeostasis at a single scale. These findings highlight the importance of the initial mechanical state in tissue engineering scaffold design and the utility of computational modeling in reducing the experimental search space for future graft development and testing.

Vibration loading promotes osteogenic differentiation of bone marrow-derived mesenchymal stem cells via p38 MAPK signaling pathway

Low magnitude high frequency vibration (LMHFV) exhibits effectively anabolic effects on the bone tissue, and can promote osteogenic differentiation of mesenchymal stem cells (MSCs) in vitro. The role of p38 MAPK signaling in LMHFV-induced osteogenesis remains unclear. In this current study, LMHFV loading was applied to BMSCs in vitro, and cell proliferation, alkaline phosphatase (ALP), matrix mineralization, as well as osteogenic genes expression were assayed. The mechanism of mechanical signal transduction was analysed using PCR array, qRT-PCR and Western blot. LMHFV increased cell proliferation in the growth medium, while inhibited proliferation in the osteogenic medium. ALP activity, matrix mineralization and osteogenic genes expression of Runx2, Col-I, ALP, OPN and OC were increased by LMHFV. p38 and MKK6 genes expression, and p38 phosphorylation were promoted in LMHFV-induced osteogenesis. Inhibition of p38 MAPK with SB203580 and targeted p38 siRNA blunted the increased ALP activity and osteogenic genes expression by LMHFV. These findings suggest that LMHFV promotes osteogenic differentiation of BMSCs, and p38 MAPK signaling shows an important function in LMHFV-induced osteogenesis.

Magnitude-dependent response of osteoblasts regulated by compressive stress

The present study aimed to investigate the role of magnitude in adaptive response of osteoblasts exposed to compressive stress. Murine primary osteoblasts and MC3T3-E1 cells were exposed to compressive stress (0, 1, 2, 3, 4, and 5 g/cm2) in 3D culture. Cell viability was evaluated, and expression levels of Runx2, Alp, Ocn, Rankl, and Opg were examined. ALP activity in osteoblasts and TRAP activity in RAW264.7 cells co-cultured with MC3T3-E1 cells were assayed. Results showed that compressive stress within 5.0 g/cm2 did not influence cell viability. Both osteoblastic and osteoblast-regulated osteoclastic differentiation were enhanced at 2 g/cm2. An increase in stress above 2 g/cm2 did not enhance osteoblastic differentiation further but significantly inhibited osteoblast-regualted osteoclastic differentiation. This study suggested that compressive stress regulates osteoblastic and osteoclastic differentiation through osteoblasts in a magnitude-dependent manner.

Low magnitude high frequency vibration promotes adipogenic differentiation of bone marrow stem cells via P38 MAPK signal

Low magnitude high frequency vibration (LMHFV) has been mainly reported for its influence on the musculoskeletal system, particularly the bone tissue. In the bone structure, osteogenic activity is the main focus of study with regards to LMHFV. However, adipogenesis, another important mode of differentiation in the bone marrow cavity that might be affected by LMHFV, is much less researched. Furthermore, the molecular mechanism of how LMHFV influences adipogenesis still needs to be understood. Here, we tested the effect of LMHFV (0.3g, 40 Hz, amplitude: 50μm), 15min/d, on multipotent stem cells (MSCs), which are the common progenitors of osteogenic, chondrogenic, adipogenic and myogenic cells. It is previously shown that LMHFV promotes osteogenesis of MSCs. In this study, we further revealed its effect on adipo-differentiation of bone marrow stem cells (BMSCs) and studied the underlying signaling pathway. We found that when treated with LMHFV, the cells showed a higher expression of PPARγ, C/EBPα, adiponectin and showed more oil droplets. After vibration, the protein expression of PPARγ increased, and the phosphorylation of p38 MAPK was enhanced. After treating cells with SB203580, a specific p38 inhibitor, both the protein level of PPARγ illustrated by immunofluorescent staining and the oil droplets number, were decreased. Altogether, this indicates that p38 MAPK is activated during adipogenesis of BMSCs, and this is promoted by LMHFV. Our results demonstrating that specific parameters of LMHFV promotes adipogenesis of MSCs and enhances osteogenesis, highlights an unbeneficial side effect of vibration therapy used for preventing obesity and osteoporosis.

Mechanical Stress Regulates Osteogenesis and Adipogenesis of Rat Mesenchymal Stem Cells through PI3K/Akt/GSK-3β/β-Catenin Signaling Pathway

Osteogenesis and adipogenesis of bone marrow mesenchymal stem cells (BMSCs) are regarded as being of great importance in the regulation of bone remodeling. In this study, rat BMSCs were exposed to different levels of cyclic mechanical stress generated by liquid drops and cultured in general medium or adipogenic medium. Markers of osteogenic (Runx2 and Collagen I) and adipogenic (C/EBPα, PPARγ, and lipid droplets) differentiation were detected using Western blot and histological staining. The protein levels of members of the phosphatidylinositol 3-kinase (PI3K)/Akt/glycogen synthase kinase 3β (GSK-3β)/β-catenin signaling pathway were also examined. Results showed that small-magnitude stress significantly upregulated Runx2 and Collagen I and downregulated PPARγ and C/EBPα expression in BMSCs cultured in adipogenic medium, while large-magnitude stress reversed the effect when compared with unloading groups. The PI3K/Akt signaling pathway could be strongly activated by mechanical stimulation; however, large-magnitude stress led to decreased activation of the signaling pathway when compared with small-magnitude stress. Activation of β-catenin with LiCl led to increased expression of Runx2 and Collagen I and reduction of C/EBPα and PPARγ expression in BMSCs. Inhibition of PI3K/Akt signaling partially blocked the expression of β-catenin. Taken together, our results indicate that mechanical stress-regulated osteogenesis and adipogenesis of rat BMSCs are mediated, at least in part, by the PI3K/Akt/GSK-3β/β-catenin signaling pathway.

A Concert between Biology and Biomechanics: The Influence of the Mechanical Environment on Bone Healing

In order to achieve consistent and predictable fracture healing, a broad spectrum of growth factors are required to interact with one another in a highly organized response. Critically important, the mechanical environment around the fracture site will significantly influence the way bone heals, or if it heals at all. The role of the various biological factors, the timing, and spatial relationship of their introduction, and how the mechanical environment orchestrates this activity, are all crucial aspects to consider. This review will synthesize decades of work and the acquired knowledge that has been used to develop new treatments and technologies for the regeneration and healing of bone. Moreover, it will discuss the current state of the art in experimental and clinical studies concerning the application of these mechano-biological principles to enhance bone healing, by controlling the mechanical environment under which bone regeneration takes place. This includes everything from the basic principles of fracture healing, to the influence of mechanical forces on bone regeneration, and how this knowledge has influenced current clinical practice. Finally, it will examine the efforts now being made for the integration of this research together with the findings of complementary studies in biology, tissue engineering, and regenerative medicine. By bringing together these diverse disciplines in a cohesive manner, the potential exists to enhance fracture healing and ultimately improve clinical outcomes.

Osteoblast Differentiation at a Glance

Ossification is a tightly regulated process, performed by specialized cells called osteoblasts. Dysregulation of this process may cause inadequate or excessive mineralization of bones or ectopic calcification, all of which have grave consequences for human health. Understanding osteoblast biology may help to treat diseases such as osteogenesis imperfecta, calcific heart valve disease, osteoporosis, and many others. Osteoblasts are bone-building cells of mesenchymal origin; they differentiate from mesenchymal progenitors, either directly or via an osteochondroprogenitor. The direct pathway is typical for intramembranous ossification of the skull and clavicles, while the latter is a hallmark of endochondral ossification of the axial skeleton and limbs. The pathways merge at the level of preosteoblasts, which progress through 3 stages: proliferation, matrix maturation, and mineralization. Osteoblasts can also differentiate into osteocytes, which are stellate cells populating narrow interconnecting passages within the bone matrix.

The key molecular switch in the commitment of mesenchymal progenitors to osteoblast lineage is the transcription factor cbfa/runx2, which has multiple upstream regulators and a wide variety of targets. Upstream is the Wnt/Notch system, Sox9, Msx2, and hedgehog signaling. Cofactors of Runx2 include Osx, Atf4, and others. A few paracrine and endocrine factors serve as coactivators, in particular, bone morphogenetic proteins and parathyroid hormone. The process is further fine-tuned by vitamin D and histone deacetylases. Osteoblast differentiation is subject to regulation by physical stimuli to ensure the formation of bone adequate for structural and dynamic support of the body. Here, we provide a brief description of the various stimuli that influence osteogenesis: shear stress, compression, stretch, micro- and macrogravity, and ultrasound. A complex understanding of factors necessary for osteoblast differentiation paves a way to introduction of artificial bone matrices.

Osteogenic gene array of osteoblasts cultured on a novel osteoinductive biphasic calcium phosphate bone grafting material

OBJECTIVES

Recently, novel biphasic calcium phosphate (BCP) scaffolds have emerged as a new class of bone grafts with osteoinductive potential demonstrating the ability to form ectopic bone in extra-skeletal sites. The aim of the present study was to perform an osteogenic gene array to target possible genes responsible for eliciting the changes in cell expression responsible for inducing osteoblast differentiation.

MATERIALS AND METHODS

Human MG63 osteoblast-like cells were seeded for 24 h on tissue culture plastic or osteoinductive BCP particles and analyzed for upregulated genes using an osteogenesis super-array. Osteoblast-related genes including those transcribed during bone mineralization, bone metabolism, cell growth and differentiation, as well as gene products representing extracellular matrix molecules, transcription factors, and cell adhesion molecules were investigated.

RESULTS

An upregulation of genes transcribing biglycan (1.7-fold), bone morphogenetic proteins 1, 2, 4, 6, and 7 (1.5-2.1-fold), various collagen isoforms including 1a1, 1a2, 2a1, and 5a1 (1.73-2.72-fold), colony stimulating factor 2 (2.59-fold), fibroblast growth factor receptor 2 (1.79-fold), fibronectin (2.56-fold), integrin alpha 1, 2, and 3 (1.82-2.24-fold), SOX9 (2.75-fold), transforming growth factor beta receptor 2 (1.72-fold), vitamin D (1.89-fold), and vascular endothelial growth factor A and B (2.00, 1.75-fold) were all significantly (p < 0.05) increased on BCP particles when compared to control tissue culture plastic.

CONCLUSION

In summary, a number of activated genes were involved in bone formation following osteoblast attachment to BCP particles. The involvement of key chondrogenic genes hints that bone grafts capable of spontaneously inducing ectopic bone formation may implicate endochondral ossification. Further investigations in the triggered pathways involved in the process of ectopic bone formation are necessary to understand the key inductive properties of these novel osteoinductive BCP particles.

CLINICAL RELEVANCE

Novel osteoinductive BCP particles demonstrate a wide range of significant increases over several key molecules implicated in osteogenesis that may be implicated in their ability to form ectopic bone formation.

MyoD promotes porcine PPARγ gene expression through an E-box and a MyoD-binding site in the PPARγ promoter region

Peroxisome proliferator-activated receptor γ (PPARγ) is a key transcription factor in adipogenesis and can be regulated by adipogenesis-related factors. However, little information is available regarding its regulation by myogenic factors. In this study, we found that over-expression of MyoD enhanced porcine adipocyte differentiation and up-regulated PPARγ expression, whereas small interfering RNA against MyoD significantly attenuated porcine adipocyte differentiation and inhibited PPARγ expression. The MyoD-binding sites in the PPARγ promoter region at -412 to -396 and -155 to -150 were identified by promoter deletion analysis and site-directed mutagenesis. Electrophoretic mobility shift assays and chromatin immunoprecipitation further showed that these two regions are MyoD-binding sites, both in vitro and in vivo, indicating that MyoD directly interacts with the porcine PPARγ promoter. Thus, our results demonstrate that an Enhancer box and a binding site for a cooperative co-activator of MyoD are present in the promoter region of porcine PPARγ; furthermore, MyoD up-regulates PPARγ expression and promotes porcine adipocyte differentiation.

Tension Force Downregulates Matrix Metalloproteinase Expression and Upregulates the Expression of Their Inhibitors through MAPK Signaling Pathways in MC3T3-E1 cells

OBJECTIVE

Matrix metalloproteinases (MMPs), produced by osteoblasts, catalyze the turnover of extracellular matrix (ECM) molecules in osteoid, and the regulation of MMP activity depends on interactions between MMPs and tissue inhibitors of metalloproteinases (TIMPs). We focused on the degradation process of ECM in osteoid that was exposed to mechanical strain, and conducted an in vitro study using MC3T3-E1 osteoblastic cells to examine the effects of tension force (TF) on the expression of MMPs and TIMPs, and activation of mitogen-activated protein kinase (MAPK) pathways.

DESIGN

Cells were incubated on flexible-bottomed culture plates and stimulated with or without cyclic TF for 24 hours. The expression of MMPs and TIMPs was examined at mRNA and protein levels by real-time RT-PCR and Western blotting, respectively. The phosphorylation of extracellular signal-regulated kinase (ERK) 1/2, p38 MAPK, and stress-activated protein kinases/c-jun N-terminal kinases (SAPK/JNK) were examined by Western blotting.

RESULTS

TF decreased the expression of MMP-1, -3, -13 and phosphorylated ERK1/2. In contrast, TF increased the expression of TIMP-2, -3 and phosphorylated SAPK/JNK. The expression of MMP-2, -14, TIMP-1, -4 and phosphorylated p38 MAPK was unaffected by TF. MMP-1, -3 and -13 expression decreased in cells treated with the ERK inhibitor PD98059 compared with untreated control cells. The JNK inhibitor SP600125 inhibited the TF-induced upregulation of TIMP-2 and -3.

CONCLUSIONS

The results suggest that TF suppresses the degradation process that occurs during ECM turnover in osteoid via decreased production of MMP-1, -3 and -13, and increased production of TIMP-2 and -3 through the MAPK signaling pathways in osteoblasts.

Articular Chondroprogenitor Cells Maintain Chondrogenic Potential but Fail to Form a Functional Matrix When Implanted Into Muscles of SCID Mice

OBJECTIVE

Articular cartilage is a complex tissue comprising phenotypically distinct zones. Research has identified the presence of a progenitor cell population in the surface zone of immature articular cartilage. The aim of the present study was to determine the in vivo plasticity of articular cartilage progenitor.

DESIGN

Chondropogenitor cells were isolated from bovine metacarpalphalangeal joints by differential adhesion to fibronectin. Cells were labeled with PKH26 and injected into the thigh muscle of severe-combined immunodeficient (SCID) mice. After 2 weeks, the muscles were dissected and cryosectioned. Sections were stained with safranin O and labeled for sox9 and collagen type II. Polymerase chain reaction analysis was carried out to determine plasticity for a number of tissue-specific markers. Full-depth chondrocytes acted as a control.

RESULTS

Fluorescent PKH26 labeled cells were detected after 2 weeks in all samples analyzed. A cartilage pellet was present after injection of freshly isolated chondrocytes. After injection with clonal and enriched populations of chondroprogenitors, no distinct pellet was detected, but diffuse cartilage nodules were found with regions of safranin O staining and Sox9. Low levels of collagen type II were also detected. Polymerase chain reaction analysis identified the presence of the endothelial cell marker PECAM-1 in one clonal cell line, demonstrating phenotypic plasticity into the phenotype of the surrounding host tissues.

CONCLUSIONS

The bovine articular cartilage progenitor cells were able to survive in vivo postimplantation, but failed to create a robust cartilage pellet, despite expressing sox9 and type II collagen. This suggests the cells require further signals for chondrogenic differentiation.

Gene expression responses to mechanical stimulation of mesenchymal stem cells seeded on calcium phosphate cement

INTRODUCTION

The aim of the study reported here was to investigate the molecular responses of human mesenchymal stem cells (MSC) to loading with a model that attempts to closely mimic the physiological mechanical loading of bone, using monetite calcium phosphate (CaP) scaffolds to mimic the biomechanical properties of bone and a bioreactor to induce appropriate load and strain.

METHODS

Human MSCs were seeded onto CaP scaffolds and subjected to a pulsating compressive force of 5.5±4.5 N at a frequency of 0.1 Hz. Early molecular responses to mechanical loading were assessed by microarray and quantitative reverse transcription-polymerase chain reaction and activation of signal transduction cascades was evaluated by western blotting analysis.

RESULTS

The maximum mechanical strain on cell/scaffolds was calculated at around 0.4%. After 2 h of loading, a total of 100 genes were differentially expressed. The largest cluster of genes activated with 2 h stimulation was the regulator of transcription, and it included FOSB. There were also changes in genes involved in cell cycle and regulation of protein kinase cascades. When cells were rested for 6 h after mechanical stimulation, gene expression returned to normal. Further resting for a total of 22 h induced upregulation of 63 totally distinct genes that were mainly involved in cell surface receptor signal transduction and regulation of metabolic and cell division processes. In addition, the osteogenic transcription factor RUNX-2 was upregulated. Twenty-four hours of persistent loading also markedly induced osterix expression. Mechanical loading resulted in upregulation of Erk1/2 phosphorylation and the gene expression study identified a number of possible genes (SPRY2, RIPK1, SPRED2, SERTAD1, TRIB1, and RAPGEF2) that may regulate this process.

CONCLUSION

The results suggest that mechanical loading activates a small number of immediate-early response genes that are mainly associated with transcriptional regulation, which subsequently results in activation of a wider group of genes including those associated with osteoblast proliferation and differentiation. The results provide a valuable insight into molecular events and signal transduction pathways involved in the regulation of MSC osteogenic differentiation in response to a physiological level of mechanical stimulation.

Correlated spatio-temporal fluctuations in chromatin compaction states characterize stem cells

Stem cells integrate signals from the microenvironment to generate lineage-specific gene expression programs upon differentiation. Undifferentiated cell nuclei are easily deformable, with an active transcriptome, whereas differentiated cells have stiffer nuclei and condensed chromatin. Chromatin organization in the stem cell state is known to be highly dynamic but quantitative characterizations of its plasticity are lacking. Using fluorescence imaging, we study the spatio-temporal dynamics of nuclear architecture and chromatin compaction in mouse embryonic stem (ES) cells and differentiated states. Individual ES cells exhibit a relatively narrow variation in chromatin compaction, whereas primary mouse embryonic fibroblasts (PMEF) show broad distributions. However, spatial correlations in chromatin compaction exhibit an emergent length scale in PMEFs, although they are unstructured and longer ranged in ES cells. We provide evidence for correlated fluctuations with large amplitude and long intrinsic timescales, including an oscillatory component, in both chromatin compaction and nuclear area in ES cells. Such fluctuations are largely frozen in PMEF. The role of actin and Lamin A/C in modulating these fluctuations is described. A simple theoretical formulation reproduces the observed dynamics. Our results suggest that, in addition to nuclear plasticity, correlated spatio-temporal structural fluctuations of chromatin in undifferentiated cells characterize the stem cell state.

Fine control of nuclear confinement identifies a threshold deformation leading to lamina rupture and induction of specific genes

The quest to understand how the mechanical and geometrical environment of cells impacts their behavior and fate has been a major force driving the recent development of new technologies in cell biology research. Despite rapid advances in this field, many challenges remain in order to bridge the gap between the classical and simple cell culture plate and the biological reality of actual tissue. In tissues, cells have their physical space constrained by neighboring cells and the extracellular matrix. Here, we propose a simple and versatile device to precisely and dynamically control this confinement parameter in cultured cells. We show that there is a precise threshold deformation above which the nuclear lamina breaks and reconstructs, whereas nuclear volume changes. We also show that different nuclear deformations correlate with the expression of specific sets of genes, including nuclear factors and classical mechanotransduction pathways. This versatile device thus enables the precise control of cell and nuclear deformation by confinement and the correlative study of the associated molecular events.

The influence of delayed compressive stress on TGF-β1-induced chondrogenic differentiation of rat BMSCs through Smad-dependent and Smad-independent pathways

Mechanical stimuli play important roles in regulating chondrogenic differentiation, but seldom studies have focused on when and how mechanical stimuli should be initiated. We have previously shown that Col2α1 mRNA was increased by delayed dynamic compressive stress initiated at the 8th day of chondrogenic culture. The current work is to further study the possibility of using delayed mechanical stress to relay chondrogenesis initiated by exogenous TGF-β1. Mechanical stimulation was delivered from day 8 to day 14 of chondrogenic culture. It showed that delayed compressive stress not only stimulated gene expression and protein synthesis of chondrocyte-specific markers, but also stimulated the endogenous TGF-β1 gene transcription, protein expression and the subsequent activation even when exogenous TGF-β1 was discontinued. Furthermore, mechanical stress also promoted protein phosphorylation and nuclear translocation of Smad2/3, the TGF-β1 downstream effectors. Inhibition TGF-β with SB431542 significantly affected the stress-induced chondrogenic gene expression. In addition, phosphorylated-p38 and RhoB were upregulated by delayed loading in a TGF-β-related manner. Phosphorylated-ERK1/2 and Wnt7a were also increased, but in a TGF-β-independent way. It indicates that delayed compressive stress can be used as an effective substitute for TGF-β1 supplement in inducing chondrogenic differentiation.

Osteoinduction: a review of old concepts with new standards

Since the discovery of osteoinduction in the early 20th century, innovative biomaterials with osteoinductive potential have emerged. Over the last 50 years, however, our ability to describe biological phenomena accurately has been improved dramatically by advancements in cell and molecular biology. The aim of this review is to divide the osteoinduction phenomenon into 3 principles: (1) mesenchymal cell recruitment, (2) mesenchymal differentiation to bone-forming osteoblasts, and (3) ectopic bone formation in vivo. Furthermore, this review formulates guidelines for in vitro and in vivo experimental testing for accurately defining new biomaterials as osteoinductive. The use of growth factors with osteoinductive potential in periodontal and oral surgery is discussed. These concepts and guidelines aim to guide the future direction of emerging biomaterials in bone regeneration.

Casein kinase 2 regulates in vivo bone formation through its interaction with bone morphogenetic protein receptor type Ia

Approximately 7.9 million fractures occur annually in the United States with 5-10% of these resulting in delayed or impaired healing. Nearly half of the trauma cost of $56 billion per year is used for the treatment of fractures. More importantly, fracture results in a substantial reduction in the quality of life. New approaches and therapies are needed to enhance fracture healing. Only a limited number of treatments are available including bone grafting, allogeneic and autologous bone marrow transplantation, and bone morphogenetic protein (BMP). We previously identified Protein Kinase CK2 to interact with BMP receptor type Ia (BMPRIa) and as a key protein for signal activation. Peptides approximately 30 AA were developed that mimicked BMP2 action in vitro by blocking this interaction. In this paper we extended our studies to investigate if the most promising peptide could induce in vivo bone formation in mice and to elucidate this mechanism of action. The CK2 blocking peptide activated the Wnt pathway. To identify the optimal peptide concentration and peptide concentration curves for mineralization studies were performed. We designed BMPRIa mutants with a point mutation in the CK2 phosphorylation site to establish a specific effect. Mineralization was initiated with the overexpression of the BMPRIa mutants indicating CK2 is a negative regulatory protein for osteoblast differentiation. Osteoclast differentiation and activity was decreased with the CK2 blocking peptide. Further, subcutaneous calvarial bone injections of a CK2 blocking peptide increased bone area, areal bone mineral density, and bone growth. These results indicate CK2 is crucial for osteoblast differentiation and could be a target for future therapeutics of fracture healing.

Scale-dependent fiber kinematics of elastomeric electrospun scaffolds for soft tissue engineering

Electrospun poly(ester urethane)urea (PEUU) scaffolds contain complex multiscale hierarchical structures that work simultaneously to produce unique macrolevel mechanical behaviors. In this study, we focused on quantifying key multiscale scaffold structural features to elucidate the mechanisms by which these scaffolds function to emulate native tissue tensile behavior. Fiber alignment was modulated via increasing rotational velocity of the collecting mandrel, and the resultant specimens were imaged using SEM under controlled biaxial strain. From the SEM images, fiber splay, tortuosity, and diameter were quantified in the unstrained and deformed configurations. Results indicated that not only fiber alignment increased with mandrel velocity but also, paradoxically, tortuosity increased concurrently with mandrel velocity and was highly correlated with fiber orientation. At microlevel scales (1-10 mum), local scaffold deformation behavior was observed to be highly heterogeneous, while increasing the scale resulted in an increasingly homogenous strain field. From our comprehensive measurements, we determined that the transition scale from heterogenous to homogeneous-like behavior to be approximately 1 mm. Moreover, while electrospun PEUU scaffolds exhibit complex deformations at the microscale, the larger scale structural features of the fibrous network allow them to behave as long-fiber composites that deform in an affine-like manner. This study underscores the importance of understanding the structure-function relationships in elastomeric fibrous scaffolds, and in particular allowed us to link microscale deformations with mechanisms that allow them to successfully simulate soft tissue mechanical behavior.

On the biomechanical function of scaffolds for engineering load-bearing soft tissues

Replacement or regeneration of load-bearing soft tissues has long been the impetus for the development of bioactive materials. While maturing, current efforts continue to be confounded by our lack of understanding of the intricate multi-scale hierarchical arrangements and interactions typically found in native tissues. The current state of the art in biomaterial processing enables a degree of controllable microstructure that can be used for the development of model systems to deduce fundamental biological implications of matrix morphologies on cell function. Furthermore, the development of computational frameworks which allow for the simulation of experimentally derived observations represents a positive departure from what has mostly been an empirically driven field, enabling a deeper understanding of the highly complex biological mechanisms we wish to ultimately emulate. Ongoing research is actively pursuing new materials and processing methods to control material structure down to the micro-scale to sustain or improve cell viability, guide tissue growth, and provide mechanical integrity, all while exhibiting the capacity to degrade in a controlled manner. The purpose of this review is not to focus solely on material processing but to assess the ability of these techniques to produce mechanically sound tissue surrogates, highlight the unique structural characteristics produced in these materials, and discuss how this translates to distinct macroscopic biomechanical behaviors.

High pressure may inhibit periprosthetic osteogenesis

Mechanical effects have been demonstrated to activate periprosthetic osteoclasts and hence to promote bone resorption. However, the periprosthetic mechanical effect on osteoblast function is not clearly understood. The purpose of this study was to explore whether the high pressure on bone caused by a prosthesis affects periprosthetic osteoblast function. We applied static pressure of various magnitudes to SV40-transfected human fetal osteoblast cells, then assayed bioactivities compared to cells cultured without pressure (control). The results showed that osteoblast proliferation, differentiation, apoptosis, necrosis, and mineralization were all sensitive to static pressure, and the effects were magnitude dependent. Low-level static pressure (20 kPa) enhanced osteogenesis. Under 50-100 kPa static pressure, proliferation was inhibited and apoptosis was enhanced, but the cellular phenotype could be maintained. High pressure (250-500 kPa) totally inhibited the bioactivity of the osteoblasts and induced necrosis. Mineralization nodules decreased significantly under 100 kPa pressure, while no nodules could be found under 250 and 500 kPa pressure. RUNX2, COL-1, and BGP mRNA expression was significantly downregulated under 250 and 500 kPa. SOX9 expression was significantly upregulated at 100 kPa but significantly downregulated at 250 and 500 kPa. RANKL/OPG expression was increased under pressure, and the differences were significant at 100 and 500 kPa. These results suggest that periprosthetic high pressure may inhibit osteogenesis and promote osteoclastogenesis. Countermeasures should be developed to improve periprosthetic osteogenesis.

FRET reveals novel protein-receptor interaction of bone morphogenetic proteins receptors and adaptor protein 2 at the cell surface

Bone morphogenetic proteins (BMPs) are involved with a wide range of processes including apoptosis, differentiation, and proliferation. Several different pathways such as Smad, p38, and PI3/Akt are activated by BMPs. Signaling is transduced by BMP receptors (BMPRs) of type I and type II that are serine/threonine kinase receptors. BMPRs shuttle between membrane domains such as caveolae enriched with caveolin-1 beta-isoform and caveolae of the caveolin-1 alpha/beta-isoforms. It is hypothesized that there are other membrane domains to which the receptors localize. We used immunoprecipitation, Western blots, image cross-correlation spectroscopy, and fluorescence resonance energy transfer to investigate the interaction of BMPRs with proteins in clathrin-coated pits (CCPs). Our data indicate that these domains are associated with at least two of the BMPRs: BRIa and BRII. For the first time, to our knowledge, we showed what we believe are specific interactions between BRIa and BRII with a key component of CCPs, adaptor protein 2. Further, disruption of CCPs resulted in increased BRIa aggregation at the cell surface and activation of the BMP pathway even in the absence of BMP2. Therefore, CCPs seem to function as a negative regulatory membrane domain for BMP pathway activation.

Boning up on Wolff's Law: mechanical regulation of the cells that make and maintain bone

Bone tissue forms and is remodeled in response to the mechanical forces that it experiences, a phenomenon described by Wolff's Law. Mechanically induced formation and adaptation of bone tissue is mediated by bone cells that sense and respond to local mechanical cues. In this review, the forces experienced by bone cells, the mechanotransduction pathways involved, and the responses elicited are considered. Particular attention is given to two cell types that have emerged as key players in bone mechanobiology: osteocytes, the putative primary mechanosensors in intact bone; and osteoprogenitors, the cells responsible for bone formation and recently implicated in ectopic calcification of cardiovascular tissues. Mechanoregulation of bone involves a complex interplay between these cells, their microenvironments, and other cell types. Thus, dissection of the role of mechanics in regulating bone cell fate and function, and translation of that knowledge to improved therapies, requires identification of relevant cues, multifactorial experimental approaches, and advanced model systems that mimic the mechanobiological environment.

Identification and expansion of human osteosarcoma-cancer-stem cells by long-term 3-aminobenzamide treatment

A novel cancer stem-like cell line (3AB-OS), expressing a number of pluripotent stem cell markers, was irreversibly selected from human osteosarcoma MG-63 cells by long-term treatment (100 days) with 3-aminobenzamide (3AB). 3AB-OS cells are a heterogeneous and stable cell population composed by three types of fibroblastoid cells, spindle-shaped, polygonal-shaped, and rounded-shaped. With respect to MG-63 cells, 3AB-OS cells are extremely smaller, possess a much greater capacity to form spheres, a stronger self-renewal ability and much higher levels of cell cycle markers which account for G1-S/G2-M phases progression. Differently from MG-63 cells, 3AB-OS cells can be reseeded unlimitedly without losing their proliferative potential. They show an ATP-binding cassette transporter ABCG2-dependent phenotype with high drug efflux capacity, and a strong positivity for CD133, marker for pluripotent stem cells, which are almost unmeasurable in MG-63 cells. 3AB-OS cells are much less committed to osteogenic and adipogenic differentiation than MG-63 cells and highly express genes required for maintaining stem cell state (Oct3/4, hTERT, nucleostemin, Nanog) and for inhibiting apoptosis (HIF-1alpha, FLIP-L, Bcl-2, XIAP, IAPs, and survivin). 3AB-OS may be a novel tumor cell line useful for investigating the mechanisms by which stem cells enrichment may be induced in a tumor cell line. The identification of a subpopulation of cancer stem cells that drives tumorigenesis and chemoresistance in osteosarcoma may lead to prognosis and optimal therapy determination. Expression patterns of stem cell markers, especially CD133 and ABCG2, may indicate the undifferentiated state of osteosarcoma tumors, and may correlate with unfavorable prognosis in the clinical setting.

Stress-sensitive nutrient consumption via steady and non-reversing dynamic shear in continuous-flow rotational bioreactors

Stress-sensitive biological response is simulated in a modified parallel-disk viscometer that implements steady and unidirectional dynamic shear under physiological conditions. Anchorage-dependent mammalian cells adhere to a protein coating on the surface of the rotating plate, receiving nutrients and oxygen from an aqueous medium that flows radially and tangentially, accompanied by transverse diffusion in the z-direction toward the active surface. This process is modeled as radial convection and axial diffusion with angular symmetry in cylindrical coordinates. The reaction/diffusion boundary condition on the surface of the rotating plate includes position-dependent stress-sensitive nutrient consumption via the zr- and zTheta-elements of the velocity gradient tensor at the cell/aqueous-medium interface. Linear transport laws in chemically reactive systems that obey Curie's theorem predict the existence of cross-phenomena between scalar reaction rates and the magnitude of the second-rank velocity gradient tensor, selecting only those elements of nabla v experienced by anchorage-dependent cells that are bound to protein-active sites. Stress sensitivity via the formalism of irreversible thermodynamics introduces a zeroth-order contribution to heterogeneous reaction rates that must be quenched when nutrients, oxygen, chemically anchored cells, or vacant active protein sites are not present on the surface of the rotating plate. Computer simulations of nutrient consumption profiles via simple nth-order kinetics (i.e., n=1,2) suggest that rotational bioreactor designs should consider stress-sensitivity when the shear-rate-based Damköhler number (i.e., ratio of the stress-dependent zeroth-order rate of nutrient consumption relative to the rate of nutrient diffusion toward active cells adhered to the rotating plate) is greater than approximately 25% of the stress-free Damköhler number. Rotational bioreactor simulations are presented for simple 1st-order, simple 2nd-order, and complex stress-free kinetics, where the latter includes a 4th-order rate expression that considers adsorption/desorption equilibria via the Fowler-Guggenheim modification of the Langmuir isotherm for receptor-mediated cell-protein binding, accompanied by the formation of receptor complexes. Dimensionless parameters are identified to obtain equivalent stress-free nutrient consumption in the exit streams of 2-dimensional creeping-flow rotational bioreactors and 1-dimensional laminar-flow tubular bioreactors. Modulated rotation of the active plate at physiological frequencies mimics pulsatile cardiovascular flow and demonstrates that these rotational bioreactors must operate above the critical stress-sensitive Damköhler number, identified under steady shear conditions, before dynamic shear has a distinguishable effect on bioreactor performance.

Parallel force measurement with a polymeric microbeam array using an optical microscope and micromanipulator

An image analysis method and its validation are presented for tracking the displacements of parallel mechanical force sensors. Force is measured using a combination of beam theory, optical microscopy, and image analysis. The primary instrument is a calibrated polymeric microbeam array mounted on a micromanipulator with the intended purpose of measuring traction forces on cell cultures or cell arrays. One application is the testing of hypotheses involving cellular mechanotransduction mechanisms. An Otsu-based image analysis code calculates displacement and force on cellular or other soft structures by using edge detection and image subtraction on digitally captured optical microscopy images. Forces as small as 250+/-50 nN and as great as 25+/-2.5 microN may be applied and measured upon as few as one or as many as hundreds of structures in parallel. A validation of the method is provided by comparing results from a rigid glass surface and a compliant polymeric surface.

Pressure-sensitive nutrient consumption via dynamic normal stress in rotational bioreactors

Pressure-sensitive biological response is simulated in "rotating-cup" bioreactors with unidirectional modulations in compressive stress at the cylindrical wall that stimulate bone-tissue growth. Anchorage-dependent mammalian cells (i) adhere to a protein coating, (ii) receive nutrients and oxygen from an aqueous medium via radial diffusion toward the active surface, and (iii) respond to physiological modulations in centrifual-force-induced fluid pressure at the cell/aqueous-medium interface. This process is modeled by the classic diffusion equation (i.e., Fick's second law), with a time-dependent reaction/diffusion boundary condition at the wall. Non-reversing angular velocity modulations resemble pulsations at physiological frequencies. Computer simulations of nutrient consumption profiles suggest that rotational bioreactor designs should consider the effects of normal stress when the pressure-sensitive Damköhler number (i.e., ratio of the pressure-dependent zeroth-order rate of nutrient consumption relative to the rate of nutrient diffusion toward active cells adhered to the cylindrical wall), evaluated under steady rotation, is greater than approximately 10-20% of the stress-free Damköhler number (i.e., beta(0,1st-order)=0.025) for simple 1st-order stress-free kinetics, and approximately 1% of the stress-free Damköhler number (i.e., beta(0,2nd-order)=0.40) for complex 2nd-order stress-free nutrient consumption. When the peak-to-peak amplitude of angular velocity modulations of the cylindrical wall is the same as or larger than the angular velocity for steady rotation, the effect of non-reversing centrifugal-force-induced dynamic normal stress in rotational bioreactors, superimposed on steady rotation, can be significant when one is below the critical value of the pressure-sensitive Damköhler number that has been identified under steady rotation.

Dlx5, a positive regulator of osteoblastogenesis, is essential for osteoblast-osteoclast coupling

The homeodomain protein Dlx5 is an activator of Runx2 (a key regulator of osteogenesis) and is thought to be an important regulator of bone formation. At present, however, the perinatal lethality of Dlx5-null mice has hampered the elucidation of its function in osteogenesis. Here we provide the first analysis of the effects of Dlx5 inactivation on bone development. Femurs of Dlx5-null mouse embryos at the end of gestation exhibit a reduction in both total and trabecular bone volume associated with increased trabecular separation and reduced trabecular number. These parameters are often associated with pathological conditions characterized by reduced osteoblast activity and increased bone resorption. Dlx5(-/-) osteoblasts in culture display reduced proliferation and differentiation rate and reduction of Runx2, Osx, Osteocalcin and Bone Sialoprotein expression. In addition to impaired osteoblast function, Dlx5(-/-) femurs exhibit significant increases in osteoclast number. As Dlx5 is not expressed by osteoclasts, we suggest that its osteoblastic expression might control osteoblast/osteoclast coupling. Cultured Dlx5(-/-) osteoblasts displayed a higher RANKL/OPG ratio. Furthermore, Dlx5(-/-) osteoblasts induced a higher number of TRAP-positive multinucleated cells in normal spleen cultures with a globally increased resorption activity. These findings suggest that Dlx5 is a central regulator of bone turnover as it activates bone formation directly and bone resorption indirectly.

Compressive force stimulates the expression of osteogenesis-related transcription factors in ROS 17/2.8 cells

OBJECTIVE

To determine how compressive force affects the expression of osteogenesis-related transcription factors in osteoblasts.

DESIGN

Cells of ROS 17/2.8, a typical osteoblastic cell line, were cultured with or without continuous compressive force (0.5-2.0 g/cm(2)). Expression of mRNA encoding the osteogenesis-related transcription factors Runx2, Osterix, Msx2, Dlx5 and AJ18 was measured using real-time polymerase chain reaction. Protein expression of these transcription factors was determined by Western blotting.

RESULTS

A compressive force of 1.0 g/cm(2) significantly increased mRNA and protein expression of Runx2, Osterix, Msx2 and Dlx5, which are critical for osteoblast differentiation. In contrast, mRNA and protein expression of AJ18, which downregulates osteoblast differentiation, were decreased with 1.0 g/cm(2) of compressive force.

CONCLUSIONS

A compressive force of 1.0 g/cm(2), which was considered optimal for bone formation under the present experimental conditions, stimulates osteoblastic differentiation via the modulation of osteogenesis-related transcription factors.