Chitin nanofiber as a promising candidate for improved salty taste

Quality and staling characteristics of white bread fortified with lysozyme-hydrolyzed mealworm powder (Tenebrio molitor L.)

Edible insects have a low environmental impact but are rich in nutrients and have been promoted as alternative protein sources. However, adding insect flour to bread negatively affects the overall quality, especially loaf volume and textural properties. Furthermore, relevant studies on chitin are limited. Therefore, this study examined chitin hydrolysis using lysozymes to enhance the quality characteristics in defatted mealworm (Tenebrio molitor L.) powder (DF-M)-supplemented bread. The chitin hydrolysis degree by lysozymes was evaluated using the 3,5-dinitrosalicylic acid assay and matrix-assisted laser desorption ionization-time-of-flight mass spectrometry. The amount of chitin oligomers increased with time, and no significant difference in the hydrolysis efficiency between water and 400 mM acetate buffer was observed. Enzymatic hydrolysis improved the DF-M water- and oil-binding and antioxidant capacities. In addition, chitin hydrolysis increased the volume and softened the texture of white bread. In particular, bread supplemented with DF-M hydrolyzed for 4 h at 10 % had the highest moisture content among the mealworm-added bread groups during storage for 5 days. Moreover, sensory evaluation showed a positive effect of chitin hydrolysis on acceptability. Our findings indicate that chitin hydrolysis can improve the quality of bread containing insect additives. In conclusion, this study provides novel insights into producing high-quality and functional bakery products from edible insects by the enzymatic hydrolysis of edible insect powders and could expand the applications of edible insects as food ingredients.

Novel NaCl reduction technologies for dry-cured meat products and their mechanisms: A comprehensive review

Sodium chloride (NaCl) confers a unique flavor and quality in meat products, however, due to growing concerns about the adverse effects of excessive NaCl consumption, how to reduce NaCl content while ensuring quality and safety has become a research hotspot in this field. This review mainly discusses the role of NaCl in dry-cured meat, as well as novel salt-reducing substances that can substitute for the effects of NaCl to achieve sodium reduction objectives. New technologies, such as vacuum curing, ultrahigh pressure curing, ultrasonic curing, pulsed electric field curing, and gamma irradiation, to facilitate the development of low-sodium products are also introduced. The majority of current salt reduction technologies function to enhance salt diffusion and decrease curing time, resulting in a decrease in NaCl content. Notably, future studies should focus on implementing multiple strategies to compensate for the deficiencies in flavor and safety caused by NaCl reduction.

Optimized high-yield synthesis of chitin nanocrystals from shrimp shell chitin by steam explosion

This study attempted for the first time to prepare chitin nanocrystals (ChNCs) from shrimp shell chitin using steam explosion (SE) method. Response surface methodology (RSM) approach was used to optimize the SE conditions. Optimum SE conditions to acquire a maximum yield of 76.78 % were acid concentration (2.63 N), time (23.70 min), and chitin to acid ratio (1:22). Transmission electron microscopy (TEM) revealed the ChNCs produced by SE had an irregular spherical shape with an average diameter of 55.70 ± 13.12 nm. FTIR spectra showed ChNCs were slightly different than chitin due to a shift in peak positions to higher wavenumber and higher peak intensities. XRD patterns indicated ChNCs were a typical α-chitin structure. Thermal analysis revealed ChNCs were less thermally stable than chitin. Compared to conventional acid hydrolysis, the SE approach described in this study is simple, fast, easy, and requires less acid concentration and acid quantity, making it more scalable and efficient for synthesizing ChNCs. Furthermore, the characteristics of the ChNCs will shed light on the potential industrial uses for the polymer.

Reduction of sodium chloride: a review

Sodium chloride (NaCl) is an enjoyable condiment. However, evidence is accumulating to indicate that an excessive intake of Na⁺ in food may lead to an increased risk of cardiovascular and cerebrovascular diseases. Previous systematic reviews have focused on replacing NaCl with other metal salts (e.g. KCl). However, new salty flavor enhancers (yeast extract, taste peptides, and odor compounds) have yet to be reviewed. This systematic review evaluates the methods for, and feasibility, of NaCl reduction. It defines NaCl reduction and considers the methods used for this purpose, especially the use of flavor enhancers (yeast extract, taste peptides, and odor compounds). © 2022 Society of Chemical Industry.

Formulation and Evaluation of Chitosan/NaCl/Maltodextrin Microparticles as a Saltiness Enhancer: Study on the Optimization of Excipients for the Spray-Drying Process

Spray-dried chitosan/NaCl/maltodextrin microparticles have the potential to be used to enhance saltiness; however, its notable hygroscopicity results in handling and storage problems, thus limiting its application. In the present study, we attempted to introduce maltodextrin, microcrystalline cellulose (MCC), and waxy starch (WS) as excipients into the spray drying formulation of microparticles to reduce the cohesiveness and caking behavior and improve the yield simultaneously by ameliorating the moisture absorption tendency. The prepared microparticles showed a spherical appearance and had particle sizes ranging from 6.29 to 7.64 μm, while the sizes of the NaCl crystals embedded in the microparticles were 0.36 to 1.24 μm. The crystalline reflections of WS and MCC were retained in the microparticles after the spray-drying process. The handling properties were assessed to be acceptable. The formulation with only maltodextrin as the excipient showed a high moisture absorption rate of 2.83 g/100 g·h and a caking strength of 3.27 kg. The addition of MCC and WS significantly reduced the hygroscopic rate and caking strength. The spray-dried products provided better saltiness perception than native NaCl; as such, they may be promising for seasoning dry food products to achieve sodium intake reduction in the food industry.

Approaches in Animal Proteins and Natural Polysaccharides Application for Food Packaging: Edible Film Production and Quality Estimation

Natural biopolymers are an interesting resource for edible films production, as they are environmentally friendly packaging materials. The possibilities of the application of main animal proteins and natural polysaccharides are considered in the review, including the sources, structure, and limitations of usage. The main ways for overcoming the limitations caused by the physico-chemical properties of biopolymers are also discussed, including composites approaches, plasticizers, and the addition of crosslinking agents. Approaches for the production of biopolymer-based films and coatings are classified according to wet and dried processes and considered depending on biopolymer types. The methods for mechanical, physico-chemical, hydration, and uniformity estimation of edible films are reviewed.

Development of bacterial cellulose/chitin multi-nanofibers based smart films containing natural active microspheres and nanoparticles formed in situ

Nanofiber-based materials have recently gained increasing attention in food packaging, drug delivery, and biomedical applications. In this study, a multi-nanofibers composite film was developed based on bacterial cellulose nanofiber (BCNF)/chitin nanofiber (CNF) hybridization. The nanofibers were responsible for the formation of well-dispersed curcumin (Cur) micro/nanoparticles in the nanocomposite films. The release of Cur from the films were affected by CNF and the sizes of Cur particles formed in situ. The Cur particles reduced tensile strength and increased water vapor permeability of BCNF film. However, CNF improved the mechanical strength and barrier property of the Cur/BCNF/CNF composite film. Moreover, the multi-nanofibers composite film showed excellent dynamic antioxidant capacity and antibacterial activity, as well as was capable to monitor pH change and trace amount of boric acid. Results of this study suggested that the Cur/BCNF/CNF composite film can be used as a smart and active food packaging material.

Enhancing Saltiness Perception Using Chitin Nanomaterials

In the present study, we prepared and characterized chitin nanomaterials with different diameters, lengths, and degree of deacetylation (DD), and investigated their capability for enhancing saltiness perception. Chitin was isolated from squid pens and transformed into chitin nanofiber (CNF), deacetylated chitin nanofiber (DACNF), and chitin nanocrystal (CNC) by ultrasonication, alkali treatment followed by ultrasonication and acid hydrolysis, respectively. The diameters of CNF, CNC and DACNF were 17.24 nm, 16.05 nm and 15.01 nm while the lengths were 1725.05 nm, 116.91 nm, and 1806.60 nm, respectively. The aspect ratios of CNF and DACNF were much higher than that of CNC. The crystalline indices of CNF and CNC were lower than that of original β-chitin, suggesting that ultrasonication and acid hydrolysis might change the molecular arrangement in crystalline region of chitin. The zeta-potentials were between 19.73 nV and 30.08 mV of chitin nanomaterials in distilled water. Concentrations of chitin nanomaterials (40–74 μg/mL) showed minimal effect on zeta-potential, whereas increasing the level of NaCl reduced the zeta-potential of solution. Moreover, NaCl solution (0.3%) with chitin nanomaterials addition produced significant higher saltiness perception than that of solution with NaCl alone. Therefore, chitin nanomaterials may be promising saltiness enhancers in the food industry.