Potential of pequi (Caryocar brasiliense Camb.) peels as sources of highly esterified pectins obtained by microwave assisted extraction

Prebiotic Activity of Pequi (Caryocar brasiliense Camb.) Shell on Lactobacillus and Bifidobacterium Strains: A Medicinal Food Ingredient

Pequi is a native and popular fruit in Cerrado biome. The internal yellow-orange mesocarp is the edible fraction of the fruit, but its shell (peel and external mesocarp), which comprises 80% of the fruit, is not used by the agro-industry during fruit processing. There is a growing interest in the reduction of food loss and waste because of environmental, economic, and social impacts. So this study evaluated the chemical composition, antioxidant capacity, and in vitro prebiotic activity of pequi shell flour. Pequi shell flour was obtained from the lyophilization and milling of pequi shell. The content of dietary fibers, oligosaccharides, sugars, organic acids, total phenolics and tannins, polyphenol profile, and antioxidant capacity was determined in pequi shell flour. In addition, its prebiotic activity was evaluated on growth and metabolism of probiotics Lactobacillus and Bifidobacterium strains. Pequi shell flour has a high content of dietary fibers (47.92 g/100 g), soluble fibers (18.65 g/100 g), raffinose (2.39 g/100 g), and phenolic compounds (14,062.40 mg gallic acid equivalents/100 g). For the first time, the polyphenols epigallocatechin gallate, epicatechin, and procyanidin B2 were identified in this by-product. Pequi shell flour promoted greater growth of Lacticaseibacillus casei L-26 (at 24-48 h) and Bifidobacterium animalis subsp. lactis BB-12, as well as higher prebiotic activity scores than fructooligosaccharides (standard prebiotic). Pequi shell flour is rich in prebiotic compounds and has a high antioxidant and prebiotic potential. The promising results encourage its use as an ingredient with antioxidant and potential prebiotic properties to elaborate new functional foods and nutraceuticals.

Different crosslinking as a strategy to improve films produced from external mesocarp of pequi (Caryocar brasiliense)

The pequi (Caryocar brasiliense) external mesocarp is rich in phenolic compounds and pectin and demonstrates the potential to produce active and biodegradable films. Thus, the present study aimed to produce films with pequi mesocarp as a polymer matrix and evaluate the influence of crosslinking agents (calcium chloride and citric acid) on the film's properties. The films obtained from pequi mesocarp (MF), showed in general, complete biodegradation in 33 days, good antioxidant capacity, and inhibition against S. aureus (24.7 mm) and E. coli (23.0 mm). The crosslinking agents reduced solubility by up to 35% and increased the elongation of the films by up to 3.5-fold. Calcium chloride promoted a higher reduction in solubility, and both agents increase the antioxidant and antimicrobial activities, compared to MF. Citric acid proved to be the best agent to modify the properties of pequi mesocarp films. In addition to the crosslinking action, it presented plasticizing effect.

Changing Despicable Me: Potential replacement of azo dye yellow tartrazine for pequi carotenoids employing ionic liquids as high-performance extractors

Color is a crucial sensory attribute that guides consumer expectations. A high-performance pequi carotenoid extraction process was developed using ionic liquid-based ethanolic solutions and a factorial design strategy to search for a potential substitute for the artificial azo dye yellow tartrazine. All-trans-antheraxanthin was identified with HPLC-PAD-MSn for the first time in pequi samples. [BMIM][BF4] was the most efficient ionic liquid, and the maximization process condition was the solid-liquid ratio R(S/L) of 1:3, the co-solvent ratio R(IL/E) of 1:1 ([BMIM][BF4]: ethanol), and three cycles of extraction with 300 s each and yielded 107.90 μg carotenoids/g of dry matter. The ionic liquid-ethanolic solution recyclability was accomplished by freezing and precipitating with an average recovery of 79 %. In CIELAB parameters, pequi carotenoid extracted with [BMIM][BF4] was brighter and yellower than the artificial azo dye yellow tartrazine. A color change of 11.08 and a hue* difference of 1.26° were obtained. Furthermore, carotenoids extracted with [BMIM][BF4] showed antioxidant activity of 35.84 μmol of α-tocopherol. These findings suggest the potential of employing the pequi carotenoids to replace the artificial azo dye yellow tartrazine in foods for improved functional properties.

Relationship between Physicochemical, Techno-Functional and Health-Promoting Properties of Fiber-Rich Fruit and Vegetable By-Products and Their Enhancement by Emerging Technologies

The preparation and processing of fruits and vegetables produce high amounts of underutilized fractions, such as pomace and peel, which present a risk to the environment but constitute a valuable source of dietary fiber (DF) and bioactive compounds. The utilization of these fiber-rich products as functional food ingredients demands the application of treatments to improve their techno-functional properties, such as oil and water binding, and health-related properties, such as fermentability, adsorption, and retardation capacities of glucose, cholesterol, and bile acids. The enhancement of health-promoting properties is strongly connected with certain structural and techno-functional characteristics, such as the soluble DF content, presence of hydrophobic groups, and viscosity. Novel physical, environmentally friendly technologies, such as ultrasound (US), high-pressure processing (HPP), extrusion, and microwave, have been found to have higher potential than chemical and comminution techniques in causing desirable structural alterations of the DF network that lead to the improvement of techno-functionality and health promotion. The application of enzymes was related to higher soluble DF content, which might be associated with improved DF properties. Combined physical and enzymatic treatments can aid solubilization and modifications, but their benefit needs to be evaluated for each DF source and the desired outcome.

Jabuticaba (Plinia sp.) Peel as a Source of Pectin: Characterization and Effect of Different Extraction Methods

The peel of jabuticaba, a small fruit native to Brazil, has been shown to be a potential source of antioxidants and soluble dietary fibers. In this study, flours prepared from these peels were evaluated as a source of pectin. Different extraction methods were employed: ultrasound (US) extraction followed by low temperature heating (40 °C); in a microwave (MW) without (method 1) or with cellulase (method 2) or hemicellulase (method 3); or in a water bath (method 4). Pectin yields ranged from approximately 18% for methods 1 and 4 up to 22% for enzyme-assisted extractions (methods 2 and 3). Methods that did not employ enzymes resulted in low amounts of methoxyl pectins, as opposed to high amounts of methoxyl pectins obtained after enzyme treatment. Cyanidin-3-O-glucoside (C3G) and ellagic acid were the main phenolic compounds found in jabuticaba peel pectins, with higher C3G levels obtained with enzyme-free extraction (methods 1 and 4). All pectins from jabuticaba peel presented a reddish tone, good emulsifying properties and high swelling capacity. The pectin extracted using US+MW+cellulase (method 2) presented better emulsifying performance (higher values of emulsifying activity and emulsion stability), more effective than commercially available citrus pectin.

Chemical Characterization and Bioaccessibility Assessment of Bioactive Compounds from Umbu (Spondias tuberosa A.) Fruit Peel and Pulp Flours

Umbu, a common fruit from the northeastern region of Brazil, contains many bioactive compounds not yet exploited. Thus, this study evaluated the potential of pulps and peels of mature and semi-mature umbu as a source of bioactive compounds. Trigonelline contents ranged from 1.75 to 6.14 mg/100 g, values higher than those of many vegetables described in the literature, such as corn and barley. The contents of extractable and non-extractable phenolic compounds were also higher than those of other vegetables. Bioaccessibility of total extractable phenolics, flavonoids, and tannins was determined (15.67–37.73%, 31.87–39.10% and 18.81–114.27%, respectively). The constituent polysaccharides of the pulp and peel were tentatively chemically characterized as arabinoxylans, arabinogalactans, rhamnoarabinogalactans, xyloglucans, and pectin of the rhamnogalacturonan type. The technological potential of peel flours was evaluated. The maturation advancement showed no significant changes in the technological properties of the flours, except for color and water solubility index. Results indicated excellent prospects for future research on umbu pulps and peels as potential sources of natural bioactive compounds.

Bioguided chemical characterization of pequi (Caryocar brasiliense) fruit peels towards an anti-diabetic activity

Pequi fruit peels are an underexploited source of polyphenols. The anti-diabetic potential of an extract and fractions from the peels were evaluated in a panel of assays. The extract and fractions thereof inhibited the release of cytokines involved in insulin resistance - TNF, IL-1β, and CCL2 - by lipopolysaccharide-stimulated THP-1 cells. The ethyl acetate fraction inhibited in vitro α-glucosidase (pIC₅₀ = 4.8 ± 0.1), an enzyme involved in the metabolization of starch and disaccharides to glucose, whereas a fraction enriched in tannins (16C) induced a more potent α-glucosidase inhibition (pIC₅₀ = 5.3 ± 0.1). In the starch tolerance test in mice, fraction 16C reduced blood glucose level (181 ± 10 mg/dL) in comparison to the vehicle-treated group (238 ± 11 mg/dL). UPLC-DAD-ESI-MS/MS analyses disclosed phenolic acids and tannins as constituents, including corilagin and geraniin. These results highlight the potential of pequi fruit peels for developing functional foods to manage type-2 diabetes.

Study on the functional properties and structural characteristics of soybean soluble polysaccharides by mixed bacteria fermentation and microwave treatment

The soybean soluble polysaccharide was prepared by mixed fermentation of lactic acid bacteria and Neurospora crassa and microwave treatment. The functional properties and structure characteristics of soybean soluble polysaccharide before and after modification were compared. Results revealed that after fermentation treatment, the content of soybean soluble polysaccharide increased to 7.09%, which was 3.16 times that of raw materials, and the microwave treatment was further increased to 7.69%. The glucose adsorption capacity, glucose dialysis retardation index and the α-amylase activity inhibition ration of soybean soluble polysaccharides increased significantly, promotes intestinal flora growth in vitro after fermentation of mixed bacteria and microwave treatment. At the same time, the analysis of monosaccharide composition and structural characteristics showed that the monosaccharide components of soybean soluble polysaccharide were redistributed after modification treatment, Scanning electron microscopy showed that modified soybean soluble polysaccharide has a larger surface area; Fourier Transform Infrared spectroscopy and X-ray Diffraction proved that the modification has slight changes in the functional groups and crystal structure of soybean soluble polysaccharide. These results suggested that okara may be a potentially inexpensive source of natural soybean soluble polysaccharide and a potential functional food ingredient.

Averrhoa bilimbi pectin-based edible films: Effects of the linearity and branching of the pectin on the physicochemical, mechanical, and barrier properties of the films

The potential of Averrhoa bilimbi pectin (ABP) as a source of biopolymer for edible film (EF) production was explored, and deep eutectic solvent (DES) (1% w/w) containing choline chloride-citric acid monohydrate at a molar ratio of 1:1 was used as the plasticizer. The EF-ABP3:1, which was produced from ABP with large branch size, showed a higher value of melting temperature (175.30 °C), tensile stress (7.32 MPa) and modulus (33.64 MPa). The EF-ABP3:1 also showed better barrier properties by obtaining the lowest water vapor transmission rates (1.10-1.18 mg/m².s) and moisture absorption values (2.61-32.13%) depending on the relative humidity compared to other EF-ABPs (1.39-1.83 mg/m².s and 3.48-51.50%, respectively) that have linear structure with smaller branch size. From these results, it was suggested that the galacturonic acid content, molecular weight, degree of esterification and pectin structure of ABP significantly influenced the properties of EFs. The interaction of highly branched pectin chains was stronger than the linear chains, thus reduced the effect of plasticizer and produced a mechanically stronger EF with better barrier properties. Hence, it was suggested that these EFs could be used as alternative degradable packaging/coating materials.

Simultaneous extraction optimization and characterization of pectin and phenolics from sour cherry pomace

In the present study, the effect of microwave-assisted extraction conditions on the simultaneous recovery of pectin and phenolic compounds from sour cherry pomace (SCP) was optimized. The results showed that maximum yield of pectin (14.65 ± 0.39%) and phenolic compounds (14.36 ± 0.29%) was obtained under microwave power of 800 W, irradiation time of 300 s, pH of 1.00 and LSR of 20 v/w. The resulting pectin under the mentioned conditions had the moisture, ash and protein content, and also total carbohydrates of ~8.32, ~3.73, ~1.41 and ~26.43%, respectively. Also, the obtained pectin with the molecular weight of 472.977 kDa and total phenol content of 91.54 ± 2.92 mg GAE/g pectin had a high purity (galacturonic acid content of ~72.86%) and suitable thermal stability (degradation temperature of 252.15 °C) and also could be classified as HMP (DE of 68.37 ± 2.78%). The FTIR, 1H NMR and XRD analysis indicated that the obtained sample was rich in esterified poly-galacturonic acid and had an amorphous structure. The phenolic compounds analysis showed that the SCP extract had a concentration-dependent antioxidant effect that was comparable with ascorbic acid and BHA at high concentrations.

Charcoal production from waste pequi seeds for heat and power generation

Many specialized technologies are available to convert waste biomass into secondary products that have a higher value and are more convenient to process than the original feedstock. This study evaluated the potential of waste pequi seeds to produce high-quality charcoal for subsequent gasification into low-tar producer gas for heat engine applications. We focused on the characterization of pequi seeds, the derived charcoal, and the collected bio-oil from slow pyrolysis conversion of the feedstock. Thermodynamic equilibrium calculations were conducted to assess gasification performance of the parent biomass and its charcoal. We also investigated the thermal degradation kinetics of pequi seeds through non-isothermal thermogravimetric analysis. Finally, a two-step energy-extraction analysis was performed for the carbonization of the parent biomass and further utilization of its charcoal in an integrated gasification gas-engine cycle. Slow pyrolysis of pequi seeds (2 °C min^-1, 430 °C) produced up to 40% of high-grade charcoal with 60% fixed carbon, 43% of bio-oil, and 16% of light gases. The overall energy extraction efficiency was estimated as 61%, based on the higher heating value of wet pequi seeds. The investigation confirmed that waste pequi seeds could be considered a promising renewable energy source for combined heat and power generation for the Brazilian agro-food industry.

Comparative Studies of Combined Influence of Variables on the Esterification Degree of Pectin Extracted by Sulfuric Acid and Citric Acid

The influence of extraction variables on degree of esterification (DE) of pectin was studied due to the significant effects of DE on the properties of the pectin-based functional biomaterials. The extracting agents (sulfuric acid and citric acid), pH value of extraction solution, extraction time, and temperature were selected to study the hydrolysis reaction of carboxylic acid ester by response surface methodology (RSM). The hydrolysis reaction occurred more violently in the weak organic acid solution than that in the strong inorganic acid solution. The DE was significantly influenced by pH of extraction solution, extraction time, and temperature through the analysis of variance. In addition, the values of DE reduced with the increasing of extraction temperature, lapse of time, and decreasing of pH value. What is more, the effects of extraction conditions on the yield, monosaccharide composition, content of protein, and ferulic acid were also studied. It is evident that the lower pH value contributed to higher extraction yield. The content of Total CH and GalA of pectin extracted by sulfuric acid were higher than that of pectin extracted by citric acid, and the content of monosaccharide showed an opposite trend.

Antioxidant Peptide Fractions Isolated from Wheat Germ Protein with Subcritical Water Extraction and Its Transport Across Caco-2 Cells

Wheat germ protein (WGP) was extracted with subcritical water and then hydrolyzed with Alcalase 2.4 L to obtain antioxidant hydrolysates. Wheat germ peptides (WG-P, Mw < 1 kDa) were purified by using Sephadex G-15 column chromatography. The results showed that WG-P-4 possessed the strongest DPPH radical scavenging activity in comparison with other peptides fractions. In addition, free amino acids and LC-MS/MS analysis showed that Gly-Pro-Phe, Gly-Pro-Glu, and Phe-Gly-Glu were the major peptides of WG-P-4. Interestingly, the WG-P-4 fractions had good absorption characteristic. Moreover, the ratio of P_app both sides of apical compartment (AP) and basolateral compartment (BL) were between 0.5 and 1.0 on Caco-2 cell model, which indicated that transmembrane transportation was mainly passive transport. Therefore, WG-P could exert an effective antioxidant action by across the intestinal epithelium.