Evaluation of various emulsifying salts addition on selected properties of processed cheese sauce with the use of mechanical vibration damping and rheological methods

Assessment of Different Levels of Blackcurrant Juice and Furcellaran on the Quality of Fermented Whey-Based Beverages Using Rheological and Mechanical Vibration Damping Techniques

In the current study, fermented whey-based beverage models with different levels of blackcurrant juice (0; 10; 20; 100% (w/w)) and furcellaran (0.25% and 0.50% (w/w)) were produced and evaluated. Physicochemical, rheological, mechanical vibration damping, and sensory analyses were performed. During fermentation (48 h), the values of pH, density, and total soluble solids decreased. On the other hand, the ethanol content during fermentation increased up to a final content in the range of 0.92-4.86% (v/v). The addition of furcellaran was effective in terms of sediment content decrease to a level of 0.25% (w/w). In general, the samples exhibited non-Newtonian pseudoplastic behaviour. The sensory analysis revealed that the sample with a composition of 20% (w/w) blackcurrant juice and 0.50% (w/w) furcellaran received the highest score.

Assessment of cheese frauds, and relevant detection methods: A systematic review

Dairy products are widely consumed in the world due to their nutritional and functional characteristics. This group of food products are consumed by all age groups due to their health-giving properties. One of these products is cheese which has a high price compared to other dairy products. Because of this, it can be prone to fraud all over the world. Fraud in food products threatens the world's food safety and can cause serious damage to human health. There are many concerns among food authorities in the world about the fraud of food products. FDA, WHO, and the European Commission provide different legislations and definitions for fraud. The purpose of this review is to identify the most susceptible cheese type for fraud and effective methods for evaluating fraud in all types of cheeses. For this, we examined the Web of Science, Scopus, PubMed, and ScienceDirect databases. Mozzarella cheese had the largest share among all cheeses in terms of adulteration due to its many uses. Also, the methods used to evaluate different types of cheese frauds were PCR, Spectrometry, stable isotope, image analysis, electrophoretic, ELISA, sensors, sensory analysis, near-infrared and NMR. The methods that were most used in detecting fraud were PCR and spectrometry methods. Also, the least used method was sensory evaluation.

The Impact of Different Hydrocolloids on the Viscoelastic Properties and Microstructure of Processed Cheese Manufactured without Emulsifying Salts in Relation to Storage Time

The current study was conducted to evaluate the effect of the addition of selected hydrocolloids [agar (AG), κ-carrageenan (KC), or gelatin (PG); as a total replacement for emulsifying salts] on the viscoelastic properties and microstructure of processed cheese (PC) samples during a storage period of 60 days (at 6 ± 2 °C). In general, PC viscoelastic properties and microstructure were affected by the addition of hydrocolloids and the length of storage time. The evaluated PC reported a more elastic behavior (G′ > G″) over the viscous one. The highest values of viscoelastic moduli (G′; G″; G*) were recorded for PC samples manufactured with KC addition, followed by those prepared with AG and PG. The control sample presented values of viscoelastic moduli similar to those of the PG sample. All PC samples tested had fat globule size values lower than 1 μm. Moreover, PC with AG and KG addition presented similar microstructures and sizes of fat globules.

Influence of Emulsifying Salts on the Growth of Bacillus thuringiensis CFBP 3476 and Clostridium perfringens ATCC 13124 in Processed Cheese

Processed cheese is a dairy product with multiple end-use applications, where emulsifying salts play a fundamental role in physicochemical changes during production. Moreover, some of these salts may be a strategy to control spoilage and pathogenic microorganisms, contributing to safety and shelf life extension. This study aimed to evaluate the in vitro inhibitory activity of two emulsifying salts (ESSP = short polyP and BSLP = long polyP) against Bacillus thuringiensis CFBP 3476 and Clostridium perfringens ATCC 13124, and to compare the in situ effects of two emulsifying salts treatments (T1 = 1.5% ESSP and T2 = 1.0% ESSP + 0.5% BSLP) in processed cheeses obtained by two different methods (laboratory- and pilot-scales), during 45-day storage at 6 °C. C. perfringens ATCC 13124 growth was not affected in vitro or in situ (p > 0.05), but both of the treatments reduced B. thuringiensis CFBP 4376 counts in the tested condition. Counts of the treatments with B. thuringiensis CFBP 3476 presented a higher and faster reduction in cheeses produced by the laboratory-scale method (1.6 log cfu/g) when compared to the pilot-scale method (1.8 log cfu/g) (p < 0.05). For the first time, the inhibitory effect of emulsifying salts in processed cheeses obtained by two different methods was confirmed, and changes promoted by laboratory-scale equipment influenced important interactions between the processed cheese matrix and emulsifying salts, resulting in B. thuringiensis CFBP 4376 growth reduction.

The effect of homogenization and addition of polysaccharides on the viscoelastic properties of processed cheese sauce

This study was conducted to determine the effect of 1-stage homogenization (OSH) and 2-stage homogenization (TSH) and the addition of polysaccharides [κ-carrageenan (CR) or furcellaran (FR) at levels ranging from 0.000 to 1.000% (wt/wt)] on the physicochemical, viscoelastic, and mechanical vibration damping properties of processed cheese sauces (PCS) after 30 d of storage (6 ± 2°C). The basic chemical properties (pH, dry matter content) were similar for all tested samples. Viscoelastic measurements indicated that PCS rigidity was directly proportional to increasing CR or FR concentration and to the application of homogenization. The interactions between the application of homogenization and the concentration of polysaccharides used were also significant. Compared with OSH, TSH did not lead to any further increase in the rigidity. The preceding results were also supported by data obtained from a nondestructive method of mechanical vibration damping. No changes in water activity were observed in any PCS sample. Overall, the addition of FR or CR appeared to be highly suitable for increasing the emulsion stability of PCS. If PCS products with softer consistency are desired, then a concentration of CR/FR ≤0.250% (wt/wt) could be recommended together with OSH/TSH. For products for which a firmer PCS consistency is required, the addition of CR in concentrations of ≥0.500% (wt/wt) or FR in concentrations of ≥1.000% (wt/wt) together with OSH is recommended. Finally, as the concentration of polysaccharides increased, a darker PCS color was observed.

Research Status and Prospect for Vibration, Noise and Temperature Rise-Based Effect of Food Transport Pumps on the Characteristics of Liquid Foods

In the field of food processing, the processing of liquid foods has always played an important role. Liquid foods have high requirements for the processing environment and equipment. As the core equipment in liquid foods processing, food transport pumps are widely used in liquid foods production, processing and transportation. Most liquid foods are non-Newtonian and vulnerable to vibration, noise, and temperature rise produced by rotary motions of food transport pumps in operation, which can finally affect foods safety. Therefore, this review summarizes the impact of mechanical vibration, noise, and temperature rise on liquid food products, with the aim of ensuring food safety while designing a cleaner, safer and more reliable food transport pumps in the future.

The Influence of Dietary Fibers on Physicochemical Properties of Acid Casein Processed Cheese Sauces Obtained with Whey Proteins and Coconut Oil or Anhydrous Milk Fat

This study aimed to evaluate different fibers (acacia, bamboo, citrus or potato) on texture, rheological properties, color, density, and water activity of processed cheese sauces (PCS) based on acid casein, WPC80 and anhydrous milk fat or organic coconut oil. The interaction between the type of oil/fat, the fiber type and the fiber content was significant regarding almost all parameters studied. The computer vision system (CVS) showed that color changes of sauces could be noticeable by consumers. The main factor influencing the change in all products’ hardness was not fat/oil, but added fibers and their concentrations. The highest increase in hardness, adhesiveness and viscosity was observed in products with potato fiber. The value of storage modulus (G′) was higher than the loss modulus (G″) and tan (δ) < 1 for all samples. Different fibers and their amounts did not influence the water activity of cheese sauces obtained with organic coconut oil (OCO) or anhydrous milk fat (AMF).