Characterization of Job's tears (Coix lachryma-jobi L.) starch films incorporated with clove bud essential oil and their antioxidant effects on pork belly during storage

Cassava Waste Starch as a Source of Bioplastics: Development of a Polymeric Film with Antimicrobial Properties

Polysaccharides represent the most abundant biopolymers in agri-food wastes and thus are the most studied polymers to produce biodegradable films for use in packaging. Starch is among the major polysaccharides extracted from food and agricultural waste that have been used as precursor material for film production. Therefore, the present study aimed at producing an active film with antimicrobial properties using starch extracted from cassava waste and oil extracted from cloves. The antimicrobial activity of the produced films was tested against Staphylococcus aureus, Salmonella Typhimurium and Listeria monocytogenes. Cassava periderm and cortex were bleached with either NaClO or H2O2 before starch aqueous extraction. The active films' antimicrobial effectiveness was assessed by the formation of inhibitory halos around film disc samples in an agar diffusion method. The inhibition zone diameters were statistically similar for all microorganisms, with an average diameter of 11.87 ± 1.62 mm. The films presented an average water vapor permeability of 0.14 g mm/m2 h kPa, an average tensile strength of 0.17 MPa and an elongation at break of 32.90%. Based on the determined properties, the produced films were deemed adequate for use in food packaging, in which antimicrobial activity is paramount.

Properties, Antioxidant and Antibacterial Activity of Southern Meagre Fish (Argyrosomus hololepidotus) Skin Gelatin Reinforced with Clove Bud Extract

The properties of biopolymer films prepared using Southern meagre fish (Argyrosomus hololepidotus) skin gelatin blends, both with and without clove bud extract (CE) at concentrations of 0.3% and 0.7%, were investigated. The addition of CE enhanced the light barrier properties and decreased water vapor permeability from 1.68 to 0.85 (×10-13 g s-1m-1Pa-1) (p < 0.05) in the films that contained CE. Additionally, the films' water solubility diminished as the concentration of CE increased (89.20 to 69.04%) (p < 0.05). SEM images revealed a smooth, uniform surface without cracks in the samples both with and without CE, whereas the films that included CE displayed a rougher and denser cross-section. FTIR spectra revealed variations in peaks between the films containing CE and those without it. The incorporation of CE raised the glass transition temperature (51.04 to 58.80 °C) and the melting temperature (124.65 to 141.92 °C) of the films. Additionally, the antioxidant activities, assessed through DPPH free radical scavenging activity (86.97%) and reduction power (λ of 0.85), along with moderate antibacterial activities against four distinct foodborne pathogens, improved with increased concentrations of CE. It can be concluded that phenolic compounds, such as eugenol in the clove extract, facilitated the formation of additional bonds between the peptide helixes of the gelatin, thereby enhancing the properties of the CE-incorporated films. Thus, Southern meagre fish gelatin film containing CE is an effective active packaging biomaterial for seafood products, exhibiting satisfactory properties.

Preparation of Physalis alkekengi L. calyx total flavonoids-chitosan composite film and its effect on preservation of chilled beef

In the present study, Physalis alkekengi L. calyx total flavonoids (PCTF) were extracted using the ultrasound-assisted ethanol method and separated and purified using macroporous resin AB-8. Physalis alkekengi L. calyx total flavonoid-chitosan (PCTF-CS) composite films containing 0.05 %, 0.10 % and 0.15 % PCTF were prepared using the purified PCTF laminated with chitosan (CS) and compared with single CS films, respectively, to investigate their mechanical properties, barrier properties, optical properties, microstructure, crystallography, thermal stability, water contact angle, particle size and zeta potential, antioxidant property, antimicrobial property, and preservation effect on chilled beef. The PCTF-CS films with PCTF additions had darker colors and higher mechanical and barrier properties than the CS films. In addition, the addition of PCTF improved the antioxidant and antimicrobial properties of the CS films. It enhances the freshness retention of fresh beef, and effectively inhibits the rise of weight loss, pH, total bacteria, total volatile basic nitrogen, and thiobarbituric acid reactive substances in beef, prolonging the shelf life of beef. These results indicate that the addition of PCTF can provide CS films with superior functional properties and bioactivities and that PCTF-CS composite films are a potential and promising packaging material for food preservation.

Sausage Preservation Using Films Composed of Chitosan and a Pickering Emulsion of Essential Oils Stabilized with Waste-Jujube-Kernel-Derived Cellulose Nanocrystals

The purpose of this study was to prepare Pickering emulsions stabilized by waste jujube kernel cellulose nanocrystals (CNC) using composite essential oils (EOs) (i.e., cinnamon essential oil [CIN] combined with clove essential oil [CL]). The Pickering emulsions were blended with chitosan (CS) to generate a composite film (CS/CNC/EOs Pickering emulsions). We evaluated the mechanical properties, barrier properties, and microstructures of CS/CNC/EOs bio-based packaging films containing different concentrations of EOs. In addition, the fresh-keeping effects of the composite membranes on beef sausages were evaluated over a 12-day storage period. Notably, the EOs exhibited good compatibility with CS. With the increase in the EOs concentration, the droplet size increased, the composite films became thicker, the elongation at break decreased, the tensile strength increased, and the water vapor permeability decreased. When the composite films were used for preserving beef sausages, the antioxidant and antibacterial activity of the membranes improved as the concentration of EOs increased, effectively prolonging the shelf life of the sausages. Composite membranes with an EOs concentration of 2% exerted the best fresh-keeping effects. Overall, owing to their antioxidant and antimicrobial properties, the bio-based composite films prepared using CS/CNC/EOs Pickering emulsions demonstrated immense potential for application in the packaging of meat products.

Cassava bagasse starch and oregano essential oil as a potential active food packaging material: A physicochemical, thermal, mechanical, antioxidant, and antimicrobial study

This research evaluates the use of cassava bagasse starch and oregano essential oil (OEO) in an active film. For comparison, films of cassava starch (CS) and cassava bagasse starch (BS) were prepared with OEO at 1, 2, and 3 %. Physical, thermal, mechanical, antioxidant, and antimicrobial properties were determined. BS films presented higher thickness, WVP, ΔE, modulus of elasticity, and maximum stress, but lower strain at break compared to CS films. Adding OEO into the films increased their thickness, moisture, solubility, WVP and strain at break. However, maximum stress, modulus of elasticity, and T dmax decreased. The CS films added with 3 % of OEO showed higher WVP (6.32 × 10-14 kg m/m2.s.Pa), intermediate solubility of 39 % and low maximum stress (0.19 MPa) while the BS film with 3 % of OEO presented 5.73 × 10-14 kg m/m2.s.Pa, 30 % and 0.39 MPa, respectively. The increase from 1 % to 3 % of OEO increased the total phenolic compound content and antioxidant activity of the films by 1.3-fold and 3.7-fold, respectively. The incorporation of 3 % OEO in the films inhibited the growth of S. aureus and E. coli. Therefore, BS and OEO films offer a promising solution as biodegradable active food packaging, providing a more sustainable alternative to traditional non-biodegradable plastic packaging.

Clove Essential Oil: Chemical Profile, Biological Activities, Encapsulation Strategies, and Food Applications

Plants have proven to be important sources for discovering new compounds that are useful in the treatment of various diseases due to their phytoconstituents. Clove (Syzygium aromaticum L.), an aromatic plant widely cultivated around the world, has been traditionally used for food preservation and medicinal purposes. In particular, clove essential oil (CEO) has attracted attention for containing various bioactive compounds, such as phenolics (eugenol and eugenol acetate), terpenes (β-caryophyllene and α-humulene), and hydrocarbons. These constituents have found applications in cosmetics, food, and medicine industries due to their bioactivity. Pharmacologically, CEO has been tested against a variety of parasites and pathogenic microorganisms, demonstrating antibacterial and antifungal properties. Additionally, many studies have also demonstrated the analgesic, antioxidant, anticancer, antiseptic, and anti-inflammatory effects of this essential oil. However, CEO could degrade for different reasons, impacting its quality and bioactivity. To address this challenge, encapsulation is viewed as a promising strategy that could prolong the shelf life of CEO, improving its physicochemical stability and application in various areas. This review examines the phytochemical composition and biological activities of CEO and its constituents, as well as extraction methods to obtain it. Moreover, encapsulation strategies for CEO and numerous applications in different food fields are also highlighted.

Valorization of guinea grass seed (Megathyrsus maximus): Synthesis and utilization of cellulose microfiber to reinforce esterified and cross-linked guinea starch films

The present study extracts starch from guinea grass seed and fiber from the starch extraction residue. The fibrous residue was chemically converted into cellulose microfiber (CMF) and used to reinforce the native, esterified and crosslinked guinea starch films. The films were developed with 5 % starch, 40 % glycerol and 0, 2.5, 5, and 10 % CMF based on the dry matter of starch. SEM images of all film samples showed good compatibility of CMF with starch molecules, and no fractures or pores were observed. Adding filler materials to modified starch films slightly increased the film thickness (0.24 to 0.30 mm) due to the high dimensions of CMF, which comprise a significant amount of the composite's volume. A synergetic effect of starch modification and CMF in films decreased the moisture content (21.98 to 9.21 %), water solubility (25.65 to 15.47 %), water vapor permeability (6.96×10-7 to 1.65×10-7g∙mm2∙day∙Pa), and elongation at the break (33.51 to 16.79 %) while increasing the tensile strength (1.84 to 3.85 MPa) and Young's modulus (5.49 to 22.93 MPa). The L* and a* values of the films decreased, and the b* and opacity values of the films increased with the addition of CMF. The XRD graph showed that all films have semicrystalline structures with peaks at 18°, 20°, and 22°, and the degree of crystallinity increases (32.3 to 55.1 %) with CMF. All film samples showed good thermal stability up to 315 °C. In conclusion, esterified starch-based films exhibited superior barrier properties and flexibility. On the contrary, cross-linked starch films demonstrated higher tensile strength and lower water solubility.

Enhancing bread preservation through non-contact application of starch-based composite film infused with clove essential oil nanoemulsion

In this study, we have successfully produced a corn starch-based composite film through the casting method, formulated with clove essential oil nanoemulsion (NCEO) and corn starch. The physical and chemical changes of the composite films were investigated at various concentrations (10 %, 20 % and 40 %) of NCEO. Furthermore, the non-contact preservation effects of the composite films on bread during 15-day storage were also examined in this study. As the concentration of NCEO increased, the composite films presented a gradual thinning, roughening, and yellowing in appearance. Following this, the water content, water vapor permeability rate, and elongation at break of the films decreased, while their hydrophobicity, tensile strength, antioxidant and antimicrobial activity increased accordingly. Through FT-IR, X-ray diffraction and thermal gravimetric analysis, it was demonstrated that NCEO has strong compatibility with corn starch. Additionally, the indices' analysis indicated that utilizing the composite film incorporating 40 % NCEO can significantly boost the shelf life and quality of bread. Moreover, it was revealed that application of the non-contact treatment with composite film could potentially contribute certain preservation effects towards bread. In light of these findings, the composite film with non-contact treatment exhibits potential as an effective, safe, and sustainable preservation technique for grain products.

Limonene and its derived oligomer as bioactive additives in starch/coffee husks biocomposites for food packaging applications

In this study, antioxidant, and antimicrobial starch-based biocomposite films reinforced with coffee husks (S/CH) were developed by incorporating either limonene (LM) (S/CH/LM) or its oligomer derivative, poly(limonene) (PLM) (S/CH/PLM), at different concentrations (5-10 % w/w of starch). Through a comprehensive assessment of film properties, morphology, and structure, a comparative analysis between the two additives was proposed. Scanning electron microscopy (SEM) revealed some defects throughout the polymer matrix after additive incorporation. The tensile strength (TS) and modulus of elasticity (ME) showed a decrease upon the inclusion of both LM and PLM, while the elongation at break (E) increased. Notably, PLM exhibited outstanding antioxidant capacity, enhancing the films by 108 % over control samples. Additionally, at just 5 % concentration, PLM effectively inhibited the growth of Escherichia coli ATCC 11775 (35.33 ± 2.52 mm) and demonstrated an impressive UV-Vis barrier, comparable to the highest amount of LM incorporated. Therefore, this research highlights the potential of coffee husk-reinforced starch biocomposites with limonene-derived additives as a promising solution for food packaging applications. The comparative analysis sheds light on the advantages of using the PLM in terms of antioxidant and antimicrobial properties, contributing to the advancement of active packaging technologies.

Ternary composite degradable plastics based on Alpinia galanga essential oil Pickering emulsion templates: A potential multifunctional active packaging

To reduce the use of petroleum-based plastics and explore multifunctional plastics, this study was conducted to prepare ternary composite plastics by doping Pickering emulsions containing Alpinia galanga essential oil into a polymer network consisting of poly(vinyl alcohol)-acetylated pullulan polysaccharides. Scanning electron microscopy results showed that although incompatible components were present in the composite plastic, compatibility improved with the addition of pullulan polysaccharides, resulting in smooth surfaces and cross-sections, which was consistent with the observation of continuous dark zones and low relative roughness (Ra = 5.51) in Atomic force microscopy. Further, Fourier transform spectroscopy and X-ray diffraction characterization revealed that the composite plastic disrupted the molecular and crystalline structures of the pure PVA, causing the stretching vibration of -OH and the decrease of relative crystallinity. Moreover, this plastic performed optimally at a PVA to pullulan polysaccharide ratio of 75:25, exhibiting good thermal (13.12 J/g) and mechanical properties, low water absorption (70.71 %) and water vapor transmission (1.80 × 10-3 g/m2 s), as well as excellent degradability. In addition, Alpinia galanga essential oil components in the composite plastic provided favorable antioxidant scavenging of DPPH and ABTS and inhibitory effects against Escherichia coli and Staphylococcus aureus. Chicken meat packaging revealed that the plastic maintained sensory parameters such as pH and color by inhibiting the oxidation of proteins and lipids during shelf-life. The findings provide insights into developing innovative, green, multifunctional packaging and broaden the in-depth application of Alpinia galanga essential oil.

Effects of benzalkonium chloride as a cationic surfactant on the physicochemical properties of adlay millet starch films

The effects of benzalkonium chloride (BC) as a cationic surfactant on the mechanical, water barrier, microstructural, and thermal properties of adlay millet starch (AS) films were investigated in this study. With increasing BC concentration, tensile strength (from 5.93 to 6.15 MPa) and elongation at break (from 41.39 to 45.48%) of AS-BC films significantly increased, whereas their moisture content, water solubility, and water vapor permeability were reduced, indicating water resistance improvement. Fourier transform infrared spectroscopy and scanning electron microscopy analysis showed that BC at concentrations below 1% did not cause noticeable changes in the microstructure of AS-BC films. In addition, the thermal stability of AS-BC films was not affected by BC, indicating good miscibility between AS and BC. Therefore, BC could improve the physicochemical properties of starch films, and AS-BC films developed in this study can be applied as novel biodegradable packaging materials in the food packaging industry.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01383-1.

The Extraction and Impact of Essential Oils on Bioactive Films and Food Preservation, with Emphasis on Antioxidant and Antibacterial Activities-A Review

Essential oils, consisting of volatile compounds, are derived from various plant parts and possess antibacterial and antioxidant properties. Certain essential oils are utilized for medicinal purposes and can serve as natural preservatives in food products, replacing synthetic ones. This review describes how essential oils can promote the performance of bioactive films and preserve food through their antioxidant and antibacterial properties. Further, this article emphasizes the antibacterial efficacy of essential oil composite films for food preservation and analyzes their manufacturing processes. These films could be an attractive delivery strategy for improving phenolic stability in foods and the shelf-life of consumable food items. Moreover, this article presents an overview of current knowledge of the extraction of essential oils, their effects on bioactive films and food preservation, as well as the benefits and drawbacks of using them to preserve food products.

Influence of Pomelo (Citrus maxima) Pericarp Essential Oil on the Physicochemical Properties of HomChaiya Rice (Oryza sativa L. cv. HomChaiya) Flour-Derived Edible Films

The food industry is increasingly interested in using active edible packaging to address environmental problems caused by conventional synthetic polymers, such as pollution and degradation. The present study took advantage of this opportunity to develop active edible packaging using Hom-Chaiya rice flour (RF), incorporating pomelo pericarp essential oil (PEO) at varying concentrations (1-3%). Films without PEO were used as controls. Various physicochemical parameters, structural and morphological observations were examined in the tested films. Overall, the results showed that the addition of PEO at varying concentrations significantly improved the qualities of the RF edible films, particularly the film's yellowness (b*) and total color. Furthermore, RF-PEO films with increased concentrations significantly reduced the film's roughness and relative crystallinity, while increasing opacity. The total moisture content in the films did not differ, but water activity was significantly reduced in the RF-PEO films. Water vapor barrier properties also improved in the RF-PEO films. In addition, textural properties, including tensile strength and elongation at break, were better in the RF-PEO films compared with the control. Fourier-transform infrared spectroscopy (FTIR) revealed strong bonding between the PEO and RF in the film. Morphological studies showed that the addition of PEO smoothed the film's surface, and this effect increased with concentration. Overall, the biodegradability of the tested films was effective, despite variations; however, a slight advancement in degradation was found in the control film. Lastly, the antimicrobial properties of the RF-PEO films exhibited excellent inhibitory effects against various pathogens, including Staphylococcus aureus (S. aureus), Listeria monocytogenes (L. monocytogenes), Escherichia coli (E. coli), and Salmonella typhimurium (S. typhimurium). This study demonstrated that RF and PEO could be an effective combination for developing active edible packaging that delivers desirable functional properties and excellent biodegradability.

Effects of cinnamon essential oil-loaded Pickering emulsion on the structure, properties and application of chayote tuber starch-based composite films

The use of non-conventional starch sources to develop biodegradable and bioactive starch-based films have attracted increasing attention recently. In this study, a nonconventional chayote tuber starch (CTS) was functionalized by zein-pectin nanoparticle-stabilized cinnamon essential oil (CEO) Pickering emulsion (ZPCO) to develop a novel bioactive composite films for food packaging application. Results demonstrated that antibacterial ZPCO featuring long-term stability was successfully obtained. FTIR and SEM analyses suggested that ZPCO have favorable dispersibility and compatibility with CTS matrix. With ZPCO increasing, the transmittance, tensile strength, and moisture content of composite films decreased, whereas their elongation at break, antimicrobial and antioxidant activities increased. ZPCO added at an appropriate level (2 %) can improve water-resistance of the films and reduce water vapor permeability. More importantly, ZPCO can achieve a slower sustained-release of CEO from composite films into food simulants. Furthermore, the composite film containing 2 % ZPCO is safe and nontoxic as proved by cell cytotoxicity test, and it can significantly prolong the shelf life of ground beef by showing the lowest total volatile base nitrogen and best acceptable sensory characteristic. Overall, the incorporation of ZPCO into CTS films offers a great potential application as a bioactive material in the food packing.

Adlay, an ancient functional plant with nutritional quality, improves human health

Adlay (Coix lacryma-jobi L.), a crop closed related to maize (Zea mays L.) and sorghum (Sorghum bicolor L.), originated in tropical/subtropical regions of Asia and Africa; southwest China primary center of this plant's origin, evolution and migration. Adlay is a traditional high-value minor crop used for both medicinal and dietary purposes. Adlay has anti-tumor, anti-bacterial, anti-inflammatory, analgesic, blood sugar-lowering, and blood lipid-lowering effects. To clarify the main bioactive components and phytochemical compounds and to fully explore their utility, this review summarizes the research done on the main functional ingredients of adlay, including amino acids and proteins, oils, vitamins and minerals, polysaccharides, and polyphenols. This study also highlighted the application of genome sequencing to tailor nutrient-rich adlay cultivars and nutraceutical product development. Additionally, the acquisition of high-density genomic data combined with next-generation phenotypic analysis will undoubtedly improve our understanding of the potential genetic regulation of adlay nutraceutical traits. This review provides new insights and ideas for the research of adlay in comparison and evolutionary genomics, and a useful reference for molecular breeding and genetic improvement of this important minor crop.

A Green Film-Forming Investigation of the Edible Film Based on Funoran: Preparation, Characterization, and the Investigation of the Plasticizer Effects

In this study, an edible film based on funoran was developed. Moreover, the effects of plasticizers (glycerol, xylitol, and sorbitol) on the physicochemical properties of the funoran films were also investigated. The interactions between plasticizers and funoran molecules of the film-forming system were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results showed that the addition of plasticizers altered and broke the initial complex entangled structures of funoran molecular chains. Funoran films containing plasticizers were compatible, homogeneous, and dense, exhibiting good thermal stability below 100 °C. With the addition of plasticizers, the elongation at break, oxygen permeability, light transmittance, and water vapor permeability increased, but the tensile strength decreased. It was found that a glycerol addition of 40% was most suitable for commercial applications. All the results revealed the excellent film-forming properties of funoran, indicating that the prepared funoran films have tremendous potential for packaging applications.

Recent Advances and Applications in Starch for Intelligent Active Food Packaging: A Review

At present, the research and innovation of packaging materials are in a period of rapid development. Starch, a sustainable, low-cost, and abundant polymer, can develop environmentally friendly packaging alternatives, and it possesses outstanding degradability and reproducibility in terms of improving environmental issues and reducing oil resources. However, performance limitations, such as less mechanical strength and lower barrier properties, limit the application of starch in the packaging industry. The properties of starch-based films can be improved by modifying starch, adding reinforcing groups, or blending with other polymers. It is of significance to study starch as an active and intelligent packaging option for prolonging shelf life and monitoring the extent of food deterioration. This paper reviews the development of starch-based films, the current methods to enhance the mechanical and barrier properties of starch-based films, and the latest progress in starch-based activity, intelligent packaging, and food applications. The potential challenges and future development directions of starch-based films in the food industry are also discussed.

Mung bean protein films incorporated with cumin essential oil: development and characterization

Biodegradable films based on mung bean protein (1, 3 and 5%) incorporated with cumin essential oil (EO) (0, 0.25 and 0.5 ml/g protein) were developed. Adding cumin oil and increasing the protein content enhanced the thickness, tensile strength and yellowness. Films incorporated with EO exhibited less water vapor permeability and water solubility, as compared to the control films. A higher antioxidant activity was also obtained by increasing the EO and protein ratios. Films with higher levels of protein displayed lower thermal stability with a lower degradation temperature, as suggested by thermo-gravimetric analyses. In addition, the incorporation of EO reduced thermal stability, as confirmed by the higher weight loss and lower degradation temperature. Furthermore, mung bean protein films containing 0.5 ml cumin oil/g protein had suitable physical characteristics, antioxidant activities, water barrier properties and thermal stability; thus, they can be used as appropriate biodegradable packaging materials for food preservation.

Current Research and Applications of Starch-Based Biodegradable Films for Food Packaging

The use of biodegradable packaging material as an alternative to conventional petrochemical-based polymers is based on the environmental issues associated with conventional materials. This review aims to update the existing knowledge regarding the application of starch-based biodegradable films for food packaging. From the review, it was evident that starch stands out among biopolymers due to its abundance and cost effectiveness. This review is the first of its kind, having reviewed over 100 articles/publications on starch-based biodegradable films, consolidating their current state of research and their applications for food packaging; therefore, this review provides an insight into the utilization of nanomaterials to improve the shelf life of packaging of food.

Chemical Compounds, Antioxidant Activities, and Inhibitory Activities Against Xanthine Oxidase of the Essential Oils From the Three Varieties of Sunflower (Helianthus annuus L.) Receptacles

Background/Aim: Essential oils of sunflower receptacles (SEOs) have antibacterial and antioxidant potential. However, the differences of biological activities from the different varieties of sunflowers have not been studied till now. The purpose of this study was to compare the differences of chemical compounds, antioxidant activities, and inhibitory activities against xanthine oxidase (XO) of SEOs from the three varieties of sunflowers including LD5009, SH363, and S606.

Methods: SEOs were extracted by using the optimal extraction conditions selected by response surface methodology (RSM). Chemical compounds of SEOs were identified from the three varieties of sunflowers by gas chromatography-mass spectrometry (GC-MS). Antioxidant activities of SEOs were detected by 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), 2,2-diphenyl-1-picrylhydrazyl (DPPH), and iron ion reduction ability. Inhibitory activities of SEOs against XO were measured by using UV spectrophotometer. XO inhibitors were selected from the main chemical compounds of SEOs by the high-throughput selections and molecular simulation docking.

Results: The extraction yields of SEOs from LD5009, SH363, and S606 were 0.176, 0.319, and 0.580%, respectively. A total of 101 chemical compounds of SEOs were identified from the three varieties of sunflowers. In addition, the results of inhibitory activities against XO showed that SEOs can reduce uric acid significantly. Eupatoriochromene may be the most important chemical compounds of SEOs for reducing uric acid. The results of antioxidant activities and inhibitory activities against XO showed that SEOs of LD5009 had the strongest antioxidant and XO inhibitory activities. The Pearson correlation coefficient (r > 0.95) showed that γ-terpinene, (E)-citral, and L-Bornyl acetate were highly correlated with the antioxidant activities and XO inhibitory ability.

Conclusion: SEOs had antioxidant activities and XO inhibitory ability. It would provide more scientific information for utilization and selection of varieties of sunflowers, which would increase the food quality of sunflowers and incomes of farmers.

Nanoemulsion-based basil seed gum edible film containing resveratrol and clove essential oil: In vitro antioxidant properties and its effect on oxidative stability and sensory characteristic of camel meat during refrigeration storage

The initial purpose of this study was to compare the in vitro antioxidant interactions between resveratrol (RES) and clove essential oil (CEO) in conventional and nanoemulsion-based basil seed gum (BSG) films. Then, the effects of the best nanoemulsion-based BSG film obtained from in vitro evaluations were determined on oxidative stability and sensory properties of minced camel meat during 20-day storage at 4 °C. The results showed higher in vitro antioxidant activities of nanoemulsion-based BSG films compared to conventional films as well as synergistic effects between RES and CEO. Furthermore, minced camel meat wrapped with nanoemulsion-based BSG film containing RES 4 μg/mL + CEO 10 mg/mL showed better results compared with the control group with the following scores: total carbonyls (0.84 nmol/mg protein), peroxide value (4.03 meq/kg lipid), thiobarbituric acid reactive substance (1.03 mg malondialdehyde/kg), and sensory analysis (overall acceptability: 5.4). The finding of the present study can be applied as a new method in meat and meat products packaging industry.

Development of Ginkgo (Ginkgo biloba) Nut Starch Films Containing Cinnamon (Cinnamomum zeylanicum) Leaf Essential Oil

There have been many studies on the development biodegradable films using starch isolated from various food sources as a substitute for synthetic plastic packaging films. In this study, starch was extracted from ginkgo (Ginkgo biloba) nuts, which were mainly discarded and considered an environment hazard. The prepared starch (GBS) was then used for the preparation of antioxidant films by incorporating various amounts of cinnamon (Cinnamomum zeylanicum) essential oil (CZEO), which provides antioxidant activity. The prepared GBS films with CZEO were characterized by measuring physical, optical, and thermal properties, along with antioxidant activity (ABTS, DPPH, and FRAP) measurements. With the increasing amount of CZEO, the flexibility and antioxidant activities of the GBS films increased proportionally, whereas the tensile strength of the films decreased. The added CZEO also increased the water vapor permeability of the GBS films, and the microstructure of the GBS films was homogeneous overall. Therefore, the obtained results indicate that the developed GBS films containing CZEO are applicable as antioxidant food packaging.

Fortification of edible films with bioactive agents: a review of their formation, properties, and application in food preservation

Biodegradable films constructed from food ingredients are being developed for food coating and packaging applications to create more sustainable and environmentally friendly alternatives to plastics and other synthetic film-forming materials. In particular, there is a focus on the creation of active packaging materials from natural ingredients, especially plant-based ones. The film matrix is typically constructed from film-forming food components, such as proteins, polysaccharides and lipids. These matrices can be fortified with active ingredients, such as antioxidants and antimicrobials, so as to enhance their functional properties. Edible active films must be carefully designed to have the required optical, mechanical, barrier, and preservative properties needed for commercial applications. This review focuses on the fabrication, properties, and functional performance of edible films constructed from natural active ingredients. It provides an overview of the type of active ingredients that can be used, how they interact with the film matrix, how they migrate through the films, and how they are released. It also discusses the potential application of these active films for food preservation. Finally, future trends are highlighted and areas where further research are required are discussed.

Edible flower essential oils: A review of chemical compositions, bioactivities, safety and applications in food preservation

In the context of consumers' growing concerns and boycotts of artificial and harmful chemicals, satisfying the demands for good-quality food products possessing clean and safe images is a challenge for food industry. Due to natural and avirulent images, various bioactivities as well as potentials to be used as safer substitutes for chemical preservatives, flower essential oils (EOs) have aroused increasing interests in the recent past. Many literatures have verified the biological activities of flower EOs, and have given high value to the preservative potentials of flower EOs in food systems. In this work, a review is done on the most recent publications associating the chemical constituents, bioactivities (antibacterial, antifungal, antioxidant and anti-pest abilities) and safety of flower EOs. The effects of flower EOs on food flavor are also discussed. Finally, the current combined preservation applications of flower EOs and other technologies are summarized.

Chemical Composition and Antimicrobial and Antioxidant Activities of Essential Oil of Sunflower (Helianthus annuus L.) Receptacle

Sunflower (Helianthus annuus L.) contains active ingredients, such as flavonoids, alkaloids and tannins. Nevertheless, few studies have focused on essential oil from the receptacle of sunflower (SEO). In this work, we investigated the chemical composition and antimicrobial and antioxidant activities of SEO. The yield of SEO was about 0.42% (v/w) by hydrodistillation. A total of 68 volatile components of SEO were putatively identified by gas chromatography–mass spectrometry (GC-MS). The main constituents of SEO were α-pinene (26.00%), verbenone (7.40%), terpinolene (1.69%) and α-terpineol (1.27%). The minimum inhibitory concentration (MIC) of SEO against P. aeruginosa and S. aureus was 0.2 mg/mL. The MIC of SEO against S. cerevisiae was 3.2 mg/mL. The MIC of SEO against E. coli and Candida albicans was 6.4 mg/mL. The results showed that SEO had high antibacterial and antifungal activities. Three different analytical assays (DPPH, ABTS and iron ion reducing ability) were used to determine the antioxidant activities. The results showed that SEO had antioxidant activities. To summarize, the results in this study demonstrate the possibility for the development and application of SEO in potential natural preservatives and medicines due to its excellent antimicrobial and antioxidant activities.

Enhancement of the water-resistance properties of an edible film prepared from mung bean starch via the incorporation of sunflower seed oil

Mung bean starch (MBS)-based edible films with incorporation of guar gum (GG) and sunflower seed oil (SSO) were developed in this study. MBS, GG, and SSO were used as the main filmogenic biopolymer, thickener, and hydrophobicity-imparting substance, respectively. To investigate the effect of SSO content on the physicochemical, mechanical, and optical properties of the films, they were supplemented with various concentrations (0, 0.5, 1, and 2%, w/w) of SSO. Increasing SSO content tended to decrease tensile strength, elongation at break, crystallinity, water solubility, and the water vapor permeability; in contrast, it increased the oxygen transmission rate and water contact angle. Consequently, the incorporation of SSO into the matrix of MBS-based films decreased their mechanical strength but effectively enhanced their water-resistance properties. Therefore, the MBS-based film developed here can be properly used as an edible film in settings that require high water-resistance properties but do not call for robust mechanical strength.

Active Edible Films Based on Arrowroot Starch with Microparticles of Blackberry Pulp Obtained by Freeze-Drying for Food Packaging

This research work evaluated the influence of the type of incorporation and variation in the concentration of blackberry pulp (BL) and microencapsulated blackberry pulp (ML) powders by freeze-drying on the chemical and physical properties of arrowroot starch films. Blackberry powders were added to the film-forming suspension in different concentrations, 0%, 20%, 30% and 40% (mass/mass of dry starch) and through two different techniques, directly (D) and by sprinkling (S). Scanning electron microscopy (SEM) images revealed that the incorporation of blackberry powder has rendered the surface of the film rough and irregular. Films incorporated with BL and ML powders showed an increase in thickness and water solubility and a decrease in tensile strength in comparison with the film containing 0% powder. The incorporation of blackberry BL and ML powders into films transferred colour, anthocyanins and antioxidant capacity to the resulting films. Films added with blackberry powder by sprinkling were more soluble in water and presented higher antioxidant capacity than films incorporated directly, suggesting great potential as a vehicle for releasing bioactive compounds into food.