Cicer arietinum (Bengal gram) husk as alternative for Talaromyces purpureogenus CFRM02 pigment production: Bioactivities and identification

Green Manuring Enhances Soil Multifunctionality in Tobacco Field in Southwest China

The use of green manure can substantially increase the microbial diversity and multifunctionality of soil. Green manuring practices are becoming popular for tobacco production in China. However, the influence of different green manures in tobacco fields has not yet been clarified. Here, smooth vetch (SV), hairy vetch (HV), broad bean (BB), common vetch (CV), rapeseed (RS), and radish (RD) were selected as green manures to investigate their impact on soil multifunctionality and evaluate their effects on enhancing soil quality for tobacco cultivation in southwest China. The biomass of tobacco was highest in the SV treatment. Soil pH declined, and soil organic matter (SOM), total nitrogen (TN), and dissolved organic carbon (DOC) content in CV and BB and activity of extracellular enzymes in SV and CV treatments were higher than those in other treatments. Fungal diversity declined in SV and CV but did not affect soil multifunctionality, indicating that bacterial communities contributed more to soil multifunctionality than fungal communities. The abundance of Firmicutes, Rhizobiales, and Micrococcales in SV and CV treatments increased and was negatively correlated with soil pH but positively correlated with soil multifunctionality, suggesting that the decrease in soil pH contributed to increases in the abundance of functional bacteria. In the bacteria-fungi co-occurrence network, the relative abundance of key ecological modules negatively correlated with soil multifunctionality and was low in SV, CV, BB, and RS treatments, and this was associated with reductions in soil pH and increases in the content of SOM and nitrate nitrogen (NO3--N). Overall, we found that SV and CV are more beneficial for soil multifunctionality, and this was driven by the decrease in soil pH and the increase in SOM, TN, NO3--N, and C- and N-cycling functional bacteria.

The effects of environmental factors on the synthesis of water-soluble Monascus red pigments via submerged fermentation: a review

Monascus pigments (MPs) have been used as natural food pigments for many years. There is a high demand for Monascus red pigments (MRPs) to enhance color and for antibacterial and cancer prevention therapies in food and medicine. Most MRPs are not water soluble, and the yield of water-soluble MRPs is naturally low. On the other hand, water-soluble MRP is more cost effective for application in industrial mass production. Therefore, it is important to improve the yield of water-soluble MRPs. Environmental factors have a significant influence on the synthesis of water-soluble MRPs, which is crucial for the development of industrial production of water-soluble MRPs. This review introduces the biosynthetic pathways of water-soluble MRPs and summarizes the effects of environmental factors on the yield of water-soluble MRPs. Acetyl coenzyme A (acetyl-CoA) is a precursor for MPs synthesis. Carbon and nitrogen sources and the carbon/nitrogen ratio can impact MP production by regulating the metabolic pathway of acetyl-CoA. Optimization of fermentation conditions to change the morphology of Monascus can stimulate the synthesis of MPs. The appropriate choice of nitrogen sources and pH values can promote the synthesis of MRPs from MPs. Additives such as metal ions and non-ionic surfactants can affect the fluidity of Monascus cell membrane and promote the transformation of MRPs into water-soluble MRPs. This review will lay the foundation for the industrial production of water-soluble MRPs. © 2024 Society of Chemical Industry.

Valorization of biowastes as fermentative substrate for production of Exiguobacterium sp. GM010 pigment and toxicity effect in rats

Bioconversion of biowastes chicken feather (CF), prawn carapace (PC), fish scale (FS), and corncob (CC) were used for Exiguobacterium sp. GM010 pigment production to reduce environmental pollution. Maximum pigment was produced in 4 % PC hydrolysate medium at pH 8 and 30 °C (0.831 Absorption Unit-AUmL^-1) compared to other hydrolysate. Biomass (1061.19 ± 26.14 mg/100 mL) and pigment yield (34.26 ± 0.62 mg/100 mL) were higher in PC medium. In CF + PC hydrolysate combination, biomass and pigment yield was 890.58 ± 11.5 mg/100 mL and 13.94 ± 0.17 mg/100 mL, respectively. Carbon and nitrogen ratio in the medium influenced pigment production. The UV-visible spectrum showed absorption peak at 357, 466, and 491 nm. Further hue angle (77-72) and chroma values (8.68-11.38) distributed over yellowish-orange region of CIELAB spectrum indicated carotenoid like characteristics. Wistar rats fed with pigment (2000 mg/kg bw) did not show sign of toxicity in haematological, biochemical and histopathological analysis. Therefore, pigment produced by recycling the biowastes promotes sustainable bioprocess and circular bioeconomy.

Valorization of pineapple peel waste for fungal pigment production using Talaromyces albobiverticillius: Insights into antibacterial, antioxidant and textile dyeing properties

The present study explores natural pigments as sustainable alternatives to synthetic textile dyes. Due to their therapeutic applications and easy production, fungal pigments have gained attention. However, data on pigment production using solid-state fermentation and optimization is limited. Milk whey was used to grow Talaromyces sp., followed by an evaluation of pigment production in solid and liquid media. Pineapple peels were used as a cost-effective substrate for pigment production, and a one-factor-at-a-time approach was used to enhance pigment production. Pineapple peel-based media produced 0.523 ± 0.231 mg/g of pigment after eight days of incubation. The crude pigment had promising antibacterial and significant antioxidant properties. The extraction fungal pigment's possible use as an eco-friendly textile dye was assessed through fabric dyeing experiments with different mordants. This work contributes to the valorization of agricultural waste and provides insight into using fungal pigments as sustainable alternatives to synthetic textile dyes.

Irradiation impact on biological activities of Anthraquinone pigment produced from Talaromyces purpureogenus and its evaluation, characterization and application in beef burger as natural preservative

BACKGROUND

The demand for natural coloring and preservative agents in food industry is increasing day by day as a result of awareness of the negative health effects of synthetic color preservatives. Consumers want foods with less processing, a longer shelf life, and clear labels that list only natural ingredients and food additives with familiar names that promote good health. In order to meet consumer demands and regain consumers' confidence in the safety of food products, the food industry was compelled to search for natural alternatives with strong antibacterial and antioxidant properties. Therefore, the objective of this study was to produce a microbial pigment that not only serve as food coloring agents but also provide health advantages owing to their bioactivities. Additionally, the potential use of anthraquinone pigment (AQP) as a natural food preservative compared to gamma irradiation was also examined to extend the shelf life of the beef burger and improve its hygienic quality.

RESULTS

This study used Talaromyces purpureogenus AUMC2603 to produce the red natural pigment, which was identified as an anthraquinone pigment (AQP). According to the results, gamma (γ) radiation had no significant effect on AQP's antibacterial properties. However, it has a negative, considerable effect on antioxidant activity, where a large dose of γ-ray may change the antioxidant components and lessen the AQP's capacity to scavenge free radicals. Additionally, the γ ray-treated AQP had a strong cytotoxic activity in relation to a high γ-ray dose. As a result, it is suggested that AQP-containing foods should not be irradiated. The extracted AQP was applied as a food additive to improve the quality and increase the shelf life of beef burgers. Significant antibacterial and antioxidant action has been shown at 2% (w/v) AQP. The findings demonstrated that the treatment of beef burger with AQP decreased the initial total bacterial count and psychrophilic bacteria and extended the shelf-life of beef burger in comparison to the control (beef burger with no addition of AQP, butylated hydroxytoluene (BHT) or gamma radiation treatment). On the other hand, there was no substantial difference in the overall amount of mold and yeast or coliform at zero time. According to sensory characteristics, beef burgers had a shelf life of 6 days for controls and 9, 12, and 15 days for AQP-treated samples at 0.5, 1 and 2%, respectively, compared to γ- irradiated samples, 9 and 21 days, at 3 and 5 Kilo Gray (KGy), respectively.

CONCLUSIONS

This research provides a natural red pigment from Talaromyces purpureogenus with potent biological activities as antimicrobials and antioxidants to be applied as coloring, additive, and preservative agent in the food industry. Also, the tested pigment offers a powerful alternative to gamma irradiation for extending the shelf life of food products.

Comparison of Pigment Production by Filamentous Fungal Strains under Submerged (SmF) and Surface Adhesion Fermentation (SAF)

Although synthetic colorants are widely used in many industries due to their high stability at different conditions in industrial processes, evidence of its negative impact on health and the environment is undeniable. Filamentous fungi are well known for their use as alternative sources to produce natural pigments. However, an adequate comparison of the productivity parameters between the fermentation systems could be limited to their heterogeneous conditions. Even though Solid-State Fermentations (SSF) on natural substrates are widely used for pigments production, complex media, and non-controlled variables (T, pH, medium composition), these systems could not only hamper the finding of accurate productivity parameters, but also mathematical modeling and genomics-based optimization. In this context, the present study screened five pigment-producing fungi by comparing Submerged (SmF) and Surface Adhesion Fermentation [biofilm (BF) and Solid-State (SSF)] with defined media and controlled variables. For this purpose, we used the same defined media with sucrose as the carbon source for pigment production on SmF, BF, and SSF, and BF and SSF were carried out on inert supports. Five molecularly identified Penicillium and Talaromyces strains isolated from the Peruvian rainforest were selected for their ability to produce yellowish-orange colorants. Highest productivities were obtained from T. brunneus LMB-HP43 in SmF (0.18 AU/L/h) and SSF (0.17 AU/L/h), and P. mallochii LMB-HP37 in SSF (0.18 AU/L/h). Both strains also exhibited the highest yields (AU/g biomass) in the three fermentation systems, reaching values greater than 18-folds in SSF compared to the other strains. Conversely, T. wortmannii LMB-HP14 and P. maximae LMB-HP33 showed no ability to produce pigments in the SSF system. The performed experiments accurately compared the effect of the fermentation system on yield and productivity. From this, further genomics approaches can be considered for an extensive analysis of pigment synthesis pathways and a genomics-driven optimization in the best fermentation system.

Biocolorants in food: Sources, extraction, applications and future prospects

Color of a food is one of the major factors influencing its acceptance by consumers. At presently synthetic dyes are the most commonly used food colorant in food industry by providing more esthetically appearance and as a means to quality control. However, the growing concern about health and environmental due to associated toxicity with synthetic food colorants has accelerated the global efforts to replace them with safer and healthy food colorants obtained from natural resources (plants, microorganisms, and animals). Further, many of these biocolorants not only provide myriad of colors to the food but also exert biological properties, thus they can be used as nutraceuticals in foods and beverages. In order to understand the importance of nature-derived pigments as food colorants, this review provides a thorough discussion on the natural origin of food colorants. Following this, different extraction methods for isolating biocolorants from plants and microbes were also discussed. Many of these biocolorants not only provide color, but also have many health promoting properties, for this reason their physicochemical and biological properties were also reviewed. Finally, current trends on the use of biocolorants in foods, and the challenges faced by the biocolorants in their effective utilization by food industry and possible solutions to these challenges were discussed.

Natural Substrates and Culture Conditions to Produce Pigments from Potential Microbes in Submerged Fermentation

Pigments from bacteria, fungi, yeast, cyanobacteria, and microalgae have been gaining more demand in the food, leather, and textile industries due to their natural origin and effective bioactive functions. Mass production of microbial pigments using inexpensive and ecofriendly agro-industrial residues is gaining more demand in the current research due to their low cost, natural origin, waste utilization, and high pigment stimulating characteristics. A wide range of natural substrates has been employed in submerged fermentation as carbon and nitrogen sources to enhance the pigment production from these microorganisms to obtain the required quantity of pigments. Submerged fermentation is proven to yield more pigment when added with agro-waste residues. Hence, in this review, aspects of potential pigmented microbes such as diversity, natural substrates that stimulate more pigment production from bacteria, fungi, yeast, and a few microalgae under submerged culture conditions, pigment identification, and ecological functions are detailed for the benefit of industrial personnel, researchers, and other entrepreneurs to explore pigmented microbes for multifaceted applications. In addition, some important aspects of microbial pigments are covered herein to disseminate the knowledge.

Dual Mode of Action of Talaromyces purpureogenus CFRM02 Pigment to Ameliorate Alcohol Induced Liver Toxicity in Rats

Talaromyces purpureogenus CFRM02 pigment exhibited antioxidant activity by scavenging free radicals. The alcohol feeding leads to free radical generation causing pathophysiological processes of alcoholic liver disease (ALD) and alcoholic hepatitis. T. purpureogenus CFRM02 pigment administered to rats ameliorated the ALD by scavenging ROS. The haematological analysis revealed the increased neutrophil circulation. The neutrophil infiltration was observed in the hepatocytes of the rats fed with pigment (600 mg/kg body weight). The increase in the number of neutrophils helps in liver regeneration caused by alcoholic hepatitis. The dual mechanism of action of pigment, antioxidant and liver regeneration through neutrophil production is attributed to alleviate the ALD. These results suggested that T. purpureogenus CFRM02 pigment represents the protective and therapeutic strategy against ALD.

Colorful Treasure From Agro-Industrial Wastes: A Sustainable Chassis for Microbial Pigment Production

Colors with their attractive appeal have been an integral part of human lives and the easy cascade of chemical catalysis enables fast, bulk production of these synthetic colorants with low costs. However, the resulting hazardous impacts on the environment and human health has stimulated an interest in natural pigments as a safe and ecologically clean alternative. Amidst sources of natural producers, the microbes with their diversity, ease of all-season production and peculiar bioactivities are attractive entities for industrial production of these marketable natural colorants. Further, in line with circular bioeconomy and environmentally clean technologies, the use of agro-industrial wastes as feedstocks for carrying out the microbial transformations paves way for sustainable and cost-effective production of these valuable secondary metabolites with simultaneous waste management. The present review aims to comprehensively cover the current green workflow of microbial colorant production by encompassing the potency of waste feedstocks and fermentation technologies. The commercially important pigments viz. astaxanthin, prodigiosin, canthaxanthin, lycopene, and β-carotene produced by native and engineered bacterial, fungal, or yeast strains have been elaborately discussed with their versatile applications in food, pharmaceuticals, textiles, cosmetics, etc. The limitations and their economic viability to meet the future market demands have been envisaged. The most recent advances in various molecular approaches to develop engineered microbiological systems for enhanced pigment production have been included to provide new perspectives to this burgeoning field of research.

Insights on sustainable approaches for production and applications of value added products

The increasing demand for the development of sustainable strategies to utilize and process agro-industrial residues paves new paths for exploring innovative approaches in this area. Biotechnology based microbial transformations provide efficient, low cost and sustainable approaches for the production of value added products. The use of organic rich residues opens new avenues for the production of enzymes, pigments, biofuels, bioactive compounds, biopolymers etc. with vast industrial and therapeutic applications. Innovative technologies like strain improvement, enzyme immobilization, genome editing, morphological engineering, ultrasound/supercritical fluid/pulse electric field extraction, etc. can be employed. These will be helpful in achieving significant improvement in qualitative and quantitative parameters of the finished products. The global trend for the valorisation of biowaste has boosted the commercialization of these products which has transformed the markets by providing new investment opportunities. The upstream processing of raw materials using microbes poses a limitation in terms of product development and recovery which can be overcome by modifying the bioreactor design, physiological parameters or employing alternate technologies which will be discussed in this review. The other problems related to the processes include product stability, industrial applicability and cost competitiveness which needs to be addressed. This review comprehensively discusses the recent progress, avenues and challenges in the approaches aimed at valorisation of agro-industrial wastes along with possible opportunities in the bioeconomy.

Agro-Industrial Residues: Eco-Friendly and Inexpensive Substrates for Microbial Pigments Production

Many commodities are abundantly produced around the world, including soybean, corn, rice sugarcane, cassava, coffee, fruits, and many others. These productions are responsible for the generation of enormous amounts of daily residues, such as cassava and sugarcane bagasses, rice husk, and coffee peel. These residues are rich sources for renewable energy and can be used as substrates for industrial interest products. Microorganisms are useful biofactories, capable of producing important primary and secondary metabolites, including alcohol, enzymes, antibiotics, pigments, and many other molecules. The production of pigments was reported in bacteria, filamentous fungi, yeasts, and algae. These natural microbial pigments are very promising because synthetic colorants present a long history of allergies and toxicity. In addition, many natural pigments present other biological activities, such as antioxidant and antimicrobial activities, that are interesting for industrial applications. The use of inexpensive substrates for the production of these metabolites is very attractive, considering that agro-industrial residues are generated in high amounts and usually are a problem to the industry. Therefore, in this article we review the production of microbial pigments using agro-industrial residues during the current decade (2010–2020), considering both submerged and solid state fermentations, wild-type and genetically modified microorganisms, laboratorial to large-scale bioprocesses, and other possible biological activities related to these pigments.

Biotechnological approaches for the production of natural colorants by Talaromyces/Penicillium: A review

There has been an increased interest in replacing synthetic colorants by colorants obtained from natural sources, especially microbial pigments. Monascus pigments have been used as natural colorings and food additives in Asia for centuries but have raised toxicity issues. Recently, Talaromyces/Penicillium species have been recognized as potential strains to produce natural pigments similar to those produced by Monascus species. To date, it has not been published a literature compilation about the research and development activity of Talaromyces/Penicillium pigments. Developing a new bioprocess requires several steps, from an initial concept to a practical and feasible application. Industrial applications of fungal pigments will depend on: (i) characterization of the molecules to assure a safe consumption, (ii) stability of the pigments to the processing conditions required by the products where they will be incorporated, (iii) optimizing process conditions to achieve high yields, iv) implementing an efficient product recovery and (v) scale-up of the bioprocess. The above aspects have been reviewed in detail to evaluate the feasibility of reaching a commercial scale of the pigments produced by Talaromyces/Penicillium. Finally, the biological activities of the pigments and their potential applications are discussed.