Fabrication of PGFE/CN-stabilized β-carotene-loaded peppermint oil nanoemulsions: Storage stability, rheological behavior and intelligent sensory analyses

Exploration of the structural mechanism of hydrogen (H2)-promoted horseradish peroxidase (HRP) activity via multiple spectroscopic and molecular dynamics simulation techniques

Horseradish peroxidase (HRP) is an enzyme that is widely used in various fields. In this study, the effects of molecular hydrogen (H2) on the activity and structural characteristics of HRP were investigated by employing multiple spectroscopic techniques, atomic force microscopy (AFM) and molecular dynamics (MD) simulations. The results demonstrated that H2 could enhance HRP activity, especially in 1.5 mg/L hydrogen-rich water (HRW). The structural analysis results showed that H2 might alter HRP activity by affecting the active sites, secondary structure, hydrogen bonding network, CS groups, and morphological characteristics. The MD results also confirmed that H2 could increase the FeN bond distance in the active site, affect the secondary structure, and increase the number of hydrogen bonds. The MD results further suggested that H2 could increase the number of salt bridges, and lengthen the SS bonds in HRP. This study primarily revealed the mechanism by which H2 enhances the HRP activity, providing insight into the interactions between gas and macromolecular proteins. However, some of the results obtained via MD simulations still need to be verified experimentally. In addition, our study also provided a new convenient strategy to enhance enzyme activity.

Structural analysis of polyglycerol fatty acid ester-coenzyme Q10 aggregates in solution

Polyglycerol fatty acid esters (PGFEs) are common food additives. PGFE-based formulations exhibit high structural stability, however, the stability mechanism of the micellar structures has not been yet elucidated. In this study, nanostructural analysis was performed using small-angle neutron and X-ray scattering (SANS and SAXS) measurements to reveal the mechanism of the structural stability of PGFE-coenzyme Q10 (CoQ10) mixtures as a CoQ10 formulation. Pure PGFE formed multilamellar vesicles, whereas PGFE-CoQ10 formed spherical micelles. Furthermore, when the amount of added water increased, the PGFE-CoQ10 micellar size and the amount of water in the micelles remained unchanged. A model-fitting analysis of the SANS results suggested that the CoQ10 molecules were introduced between the surfactants, forming a palisade-type structure. The high structural stability of the PGFE-CoQ10 micelles was attributed to two factors: proper spreading of the hydrophilic head chains and inhibition of the change of the amount of water inside the micelles by the PGFE heads and quinone ring of CoQ10. This indicates that PGFE-CoQ10 can function in water while maintaining the micellar structure formed in the storage solution. The findings of this study are important for the safety and nano-hazard aspects of PGFE-CoQ10 formulations.

Improved antioxidant activity and delivery of peppermint oil Pickering emulsion stabilized by resveratrol-grafted zein covalent conjugate/quaternary ammonium chitosan nanoparticles

Novel nanoparticles (Z-R/H) were successfully fabricated by a resveratrol-grafted zein covalent conjugate (Z-R) combined with quaternary ammonium chitosan (HTCC), which were used as stabilizers to prepare peppermint oil (PO) Pickering emulsions with antioxidant activity. HTCC effectively adjusted wettability of Z-R conjugate, and three-phase contact angle of Z-R/H3:1 was moderate (95.01°). The influencing factors of Pickering emulsion formation, including volume fraction of PO, concentration of Z-R/H, and mass ratio of Z-R to HTCC, were evaluated by droplet size, ζ-potential, microscopic observation, and stability index analysis. Pickering emulsions stabilized by Z-R/H3:1 showed excellent physical stability under heat treatment. Z-R/H nanoparticles adsorbed on the oil-water interface yielded a dense filling layer as a physical barrier to improve the emulsion stability, which was validated by confocal laser-scanning microscopy. After 4 weeks of storage, retention rate of PO in Pickering emulsion stabilized by Z-R/H3:1 remained high (72.1 %). Electronic nose analysis showed that Z-R/H3:1-stabilized emulsion effectively prevented volatilization of PO aroma components. Additionally, PO and Z-R/H nanoparticles provided an additive antioxidant effect of Pickering emulsions against DPPH and ABTS free radicals. In summary, these novel Z-R/H nanoparticle offer promising applications as a stabilizer with great potential in preparing functional Pickering emulsions to improve essential oil delivery.

On surface composition and stability of β-carotene microcapsules comprising pea/whey protein complexes by synchrotron-FTIR microspectroscopy

This study aims to elucidate the stability of spray dried β-carotene microcapsules by identifying their surface composition using synchrotron-Fourier transform infrared (FTIR) microspectroscopy. To investigate the impact of enzymatic cross-linking and polysaccharide addition on heteroprotein, three wall materials were prepared: pea/whey protein blends (Con), cross-linked pea/whey protein blends (TG), and cross-linked pea/whey protein blends-maltodextrin complex (TG-MD). The TG-MD exhibited the highest encapsulation efficiency (>90 %) after 8 weeks of storage followed by TG and Con. Chemical images obtained using synchrotron-FTIR microspectroscopy confirmed that the TG-MD displayed the least amount of surface oil, followed by TG and Con, due to increasing amphiphilic β-sheet structure of the proteins led by cross-linking and maltodextrin addition. Both enzymatic cross-linking and polysaccharide addition improved the stability of β-carotene microcapsules, demonstrating that pea/whey protein blends with maltodextrin can be utilised as a hybrid wall material for enhancing the encapsulation efficiency of lipophilic bioactive compounds in foods.

Preparation of lemon essential oil nanoemulsion and its effect on the microbial community of pork patties

The purpose of this study was to prepare an essential oil nanoemulsion and apply it to meat products to achieve antimicrobial effect. The nanoemulsion of lemon essential oil was produced by high power ultrasonication. The influences of ultrasonic power, ultrasonic time, and mass ratio of sodium caseinate to essential oil on the particle size were examined. The optimal conditions for preparing nanoemulsion were ultrasonic power 327 W, ultrasonic time 18 min, and sodium caseinate to essential oil mass ratio 4.23:1. Lower temperature was more conducive to the preservation of nanoemulsion. Compared to control and essential oil group, the nanoemulsion could decrease the total volatile basic nitrogen content and total bacterial colony in pork patties. When applied to pork patties, the nanoemulsion decreased the microbial diversity and inhibited the growth of a variety of microorganisms such as Bacillus, extending the storage time of pork patties. This study developed a novel and workable nanoemulsion for inhibiting bacteria of meat products.

Characterization and stability of peppermint oil emulsions using polyglycerol esters of fatty acids and milk proteins as emulsifiers

Three peppermint oil emulsions using polyglycerol esters of fatty acids-casein (PGFE-CN), polyglycerol esters of fatty acids-sodium caseinate (PGFE-NaCN), and polyglycerol esters of fatty acids-whey protein isolate (PGFE-WPI) as emulsifiers were fabricated, and the droplet size, zeta potential, viscosity, and stability of emulsions were determined. The experimental results showed that the emulsion containing PGFE-CN has relatively smaller droplet size of 231.77 ± 0.49 nm. No significant changes were observed on the average particle size, polydispersity index and zeta potential during 4-week of storage, indicating that the emulsions kept stable against pH, salt ion, freeze-thaw, and storage. Fourier transform infrared spectrometer (FTIR) results showed that the electrostatic interaction occurs between CN and PGFE in the emulsion. The confocal laser scanning microscope (CLSM) was used to observe the microstructure of the emulsion, proving that droplets were evenly distributed throughout the aqueous phase by PGFE-CN emulsifier. The protein-stabilized emulsions can be used as potential carriers for the delivery of the lipophilic nutrients such as peppermint oil. PRACTICAL APPLICATION: PGFE-CN emulsifier can be directly added to the beverage systems containing oil or protein, such as coconut milk, peanut milk, and walnut milk. It can enhance the stability of beverage, prevent the precipitation, stratification, and oil floating, improve the homogeneity of the system and therefore extend the shelf life.

Effect of Freeze-Thaw Cycles on Juice Properties, Volatile Compounds and Hot-Air Drying Kinetics of Blueberry

This paper studied the effects of freeze-thaw (FT) cycles on the juice properties and aroma profiles, and the hot-air drying kinetics of frozen blueberry. After FT treatment, the juice yield increased while pH and total soluble solids of the juice keep unchanged. The total anthocyanins contents and DPPH antioxidant activities of the juice decreased by FT treatments. The electronic nose shows that FT treatments significantly change the aroma profiles of the juice. The four main volatile substances in the fresh juice are (E)-2-hexenal, α-terpineol, hexanal and linalyl formate, which account for 48.5 ± 0.1%, 17.6 ± 0.2%, 14.0 ± 1.5% and 7.8 ± 2.7% of relative proportions based on total ion chromatogram (TIC) peak areas. In the FT-treated samples, the amount of (E)-2-hexenal and hexanal decreased significantly while α-terpineol and linalyl formate remained almost unchanged. Repeated FT cycles increased the ethanol content and destroyed the original green leafy flavor. Finally, the drying kinetics of FT-treated blueberries was tested. One FT treatment can shorten the drying time by about 30% to achieve the same water content. The D_eff values of the FT-treated sample are similar, which are about twice as large as the value of the fresh sample. The results will be beneficial for the processing of frozen blueberry into juice or dried fruits.

Exploration of the Microstructure and Rheological Properties of Sodium Alginate-Pectin-Whey Protein Isolate Stabilized Β-Carotene Emulsions: To Improve Stability and Achieve Gastrointestinal Sustained Release

Sodium alginate (SA)-pectin (PEC)-whey protein isolate (WPI) complexes were used as an emulsifier to prepare β-carotene emulsions, and the encapsulation efficiency for β-carotene was up to 93.08%. The confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) images showed that the SA-PEC-WPI emulsion had a compact network structure. The SA-PEC-WPI emulsion exhibited shear-thinning behavior and was in a semi-dilute or weak network state. The SA-PEC-WPI stabilized β-carotene emulsion had better thermal, physical and chemical stability. A small amount of β-carotene (19.46 ± 1.33%) was released from SA-PEC-WPI stabilized β-carotene emulsion in simulated gastric digestion, while a large amount of β-carotene (90.33 ± 1.58%) was released in simulated intestinal digestion. Fourier transform infrared (FTIR) experiments indicated that the formation of SA-PEC-WPI stabilized β-carotene emulsion was attributed to the electrostatic and hydrogen bonding interactions between WPI and SA or PEC, and the hydrophobic interactions between β-carotene and WPI. These results can facilitate the design of polysaccharide-protein stabilized emulsions with high encapsulation efficiency and stability for nutraceutical delivery in food and supplement products.