Novel processing technologies for improving quality and storage stability of jerky: A review

Combination of contact ultrasound and infrared radiation for improving the quality and flavor of air-dried beef during hot air drying

Air-dried beef, a traditional dry fermented meat product in China, whose quality is largely influenced by processing conditions. In this study, contact ultrasound (CU) and infrared radiation (IR) were employed to enhance hot air drying (HAD), with an investigation into the mechanisms underlying improvements in quality and flavor. Samples subjected to CU and IR treatments during HAD (CU-IRD) demonstrated superior color (L* = 42.68, a* = 5.05, b* = -3.86) and tenderness (140.59 N) than HAD group, primarily attributed to reduced drying times and alterations in ultrastructure. Analyses utilizing SDS-PAGE and total volatile basic nitrogen (TVB-N) revealed that HAD and CU-HAD resulted in significant protein oxidation (197.85 mg TVB-N/kg and 202.23 mg TVB-N/kg, respectively), while IR treatments were associated with increased thermal degradation of proteins, producing lower molecular weight peptides. Compared with HAD group, the activities of certain lipases and proteases were enhanced by ultrasound and infrared treatments, leading to the release of greater amounts of free fatty acids and flavor amino acids. Furthermore, the thermal effects of infrared and the cavitation effects of ultrasound contributed to increased fat oxidation, amino acid Strecker degradation, and esterification reactions, thereby augmenting the diversity and concentration of volatile flavor compounds, including alkanes, ketones, aldehydes, and esters. These findings indicate that the synergistic application of CU and IR represents a promising strategy for enhancing the quality of air-dried beef.

Effects of different drying methods on physicochemical, textural, flavor, and sensory characteristics of yak jerky

The work aimed to study the effect of four drying methods, namely constant temperature hot air drying (HD), microwave drying (MD), hot air microwave drying (HMD), and gradient hot air drying (GHD), on quality characteristics of dried yak meat. The analyses of physicochemical, textural, flavor, and sensory characteristics were carried out based on these four drying methods. The results revealed that microwave dried yak jerky exhibited better color and received the highest sensory score. Hardness of samples were affected by the drying methods, which showed significant differences. There were 21 free amino acids (FAAs) detected in dried yak samples. The samples treated by microwave drying showed the highest total free amino acid content (73.30 mg/100 g) and the EUC value was significantly higher than other methods, indicating the sample displayed greater flavor. A total of 153 volatile compounds were identified in dried yak meat samples, primarily including aldehydes, ketones, and esters. Moreover, the sensory evaluation indicated that the drying methods could significantly affect on color, flavor, and overall acceptability of different samples. Microwave drying samples scored higher than other drying methods. Overall, considering aspects of quality, time savings, and energy efficiency, microwave drying of yak jerky emerges as a more satisfactory option. This study could provide important theoretical support for the application of drying methods to improve the quality of yak jerky and enhance production efficiency.

Impact of Ultrasound Pre-Treatment on the Drying Kinetics and Quality of Chicken Breast-A Comparative Study of Convective and Freeze-Drying Methods

Fresh meat has a limited shelf life and is prone to spoilage. Drying serves as a common method for food preservation. Non-thermal techniques such as ultrasound treatment (US) can positively affect the drying processes and alter the final product. The study aimed to evaluate the impact of US pre-treatment on the hot air (HA) and freeze-drying (FD) of chicken breast meat and the quality of the dried products. US pre-treatment had a varied impact depending on the drying method used. The contact US method extended the HA drying time (about 50%) but improved water removal during FD (about 30%) compared to the untreated samples. Both methods resulted in low water content (<8.3%) and low water activity (<0.44). While rehydration properties (RR) and hygroscopicity (H) were not significantly affected by US pre-treatment in HA drying (about 1.35% and about 1.1, respectively), FD noticed differences due to shrinkage and porosity variations (RR: 2.4-3.2%, H: 1.19-1.25). The HA-dried samples exhibited notably greater tissue shrinkage and a darker surface color than the FD meat. Ultrasonic processing holds substantial potential in creating dried meat products with tailored characteristics. Hence, meticulous consideration of processing methods and parameters is of utmost importance.

Development of semi-dried goat meat jerky using tenderizers considering the preferences of the elderly

Elderly people avoid eating red meat and dried meat product due to its texture and stiffness; they deprive them of rich sources of nutrients. In addition, food-related diseases are exponentially increasing due to using synthetic additives in food products. Therefore, this research aimed to develop semi-dried goat meat jerky considering geriatric preferences by using natural tenderizers and nitrate. Four treatments were formulated negative control (NC [synthetic nitrite without tenderizers]), positive control (PC [Swiss chard without tenderizers]), T1 (Swiss chard with pineapple powder), and T2 (Swiss chard with pineapple and tomato powder). T1 and T2 had higher processing yield, and rehydration capacity compared with NC and PC. The fat content of T1 and T2 was lower than the control groups. Moisture was significantly higher in T1, NC, and T2 than in PC (p < 0.05). T2 showed the lowest water activity (0.87), lowest shear force (4.82 kgf), and lowest total plate count (TPC). The lowest pH and thiobarbituric acid reactive substances (TBARS) were observed in T1 and T2. T1 showed the lowest lightness and the maximum redness (p < 0.05) while PC showed the lowest yellowness. During the storage period, moisture and pH decreased, and TPC and TBARS significantly increased whereas water activity is stable regardless of the treatment. The results of the myofibrillar fragmentation index (MFI) and sodium dodecyl sulfate-polyacrylamide gel revealed that T1 and T2 more effectively converted protein to polypeptides. In addition, tenderizers positively affected thrombogenicity, atherogenicity, and hypocholesterolemic/hypercholesterolemic indices. T2 observed the highest overall sensory acceptance by reducing goaty flavor. Overall, jerky treated with tenderizers is easily chewable and digestible for the elderly due to its tenderness and essential fatty acids that would be senior-friendly food.

Critical review and recent advances of emerging real-time and non-destructive strategies for meat spoilage monitoring

Monitoring and evaluating food quality, especially meat quality, has received a growing interest to ensure human health and decrease waste of raw materials. Standard analytical approaches used for meat spoilage assessment suffer from time consumption, being labor-intensive, operation complexity, and destructiveness. To overcome shortfalls of these traditional methods and monitor spoilage microorganisms or related metabolites of meat products across the supply chain, emerging analysis devices/systems with higher sensitivity, better portability, on-line/in-line, non-destructive and cost-effective property are urgently needed. Herein, we first overview the basic concepts, causes, and critical monitoring indicators associated with meat spoilage. Then, the conventional detection methods for meat spoilage are outlined objectively in their strengths and weaknesses. In addition, we place the focus on the recent research advances of emerging non-destructive devices and systems for assessing meat spoilage. These novel strategies demonstrate their powerful potential in the real-time evaluation of meat spoilage.

Study on Ways to Improve the Quality of Black Goat Meat Jerky and Reduce Goaty Flavor through Various Spices

In this study, we analyzed the physicochemical and sensory properties of black goat jerky marinated with various spices (non-spice, control; rosemary, RO; basil, BA; ginger, GI; turmeric, TU; and garlic, GA). The physicochemical properties of black goat jerky analyzed were pH, water holding capacity, color, cooking yield, shear force, and fatty acid composition. The sensory characteristics were analyzed through the aroma profile (electronic nose), taste profile (electronic tongue), and sensory evaluation. The pH and water holding capacity of the GI showed higher values than the other samples. GI and GA showed similar values of CIE L* and CIE a* to that of the control. The shear force of the GI and TU was significantly lower than that of other samples (p<0.05). Regarding fatty acid composition, GI showed high unsaturated and low saturated fatty acid contents compared with that of the other samples except for RO (p<0.05). In the aroma profile, the peak area of hexanal, which is responsible for a faintly rancid odor, was lower in all treatment groups than in the control. In the taste profile, the umami of spice samples was higher than that of the control, and among the samples, GI had the highest score. In the sensory evaluation, the GI sample showed significantly higher scores than the control in terms of flavor, aroma, goaty flavor, and overall acceptability (p<0.05). Therefore, marinating black goat jerky with ginger powder enhanced the overall flavor and reduced the goat odor.

Impact of Humectants on Physicochemical and Functional Properties of Jerky: A Meta-Analysis

This study aimed to determine the effects of humectants on moisture content, water activity, tenderness, color, microbiological analysis, protein denaturation, and oxidation of jerky. A thorough search for papers published in scientific journals that examined the impacts of humectants on jerky was carried out using Web of Science, Google Scholar, PubMed, and Science Direct. Only 14 studies matched inclusion requirements. They were used in the meta-analysis to synthesise quantitative findings. In the current investigation, jerky produced with beef, poultry, goat, or pork was used. The standardised mean difference (SMD) between treatments with humectants and controls was examined to investigate the effects of humectants using random-effects models. Heterogeneity was investigated using meta-regression. A subgroup analysis was carried out for significant factors. Results revealed that the addition of humectants had no significant impact on water activity, pH, fat, ash, CIE L*, or CIE a* (p>0.05). However, humectant addition significantly increased moisture (SMD=1.28, p<0.05), CIE b* (SMD=1.67, p<0.05), and overall acceptability (SMD=1.73, p<0.05). It significantly decreased metmyoglobin (SMD=-0.96, p<0.05), shear force (SMD=-0.84, p<0.05), and protein (SMD=-1.61, p<0.05). However, it was difficult to get a firm conclusion about how humectants affected the myofibrillar fragmentation index, total plate count, and 2-thiobarbituric acid-reactive substances because there were fewer than ten studies. To sum up, the proper use of humectants in jerky demands careful attention to both type and quantity, needing a delicate balancing act with other contributing factors.

Improving the quality and processing efficiency of beef jerky via drying in confined conditions of pre-stretching

Inspired by the mechanical enhancement of hydrogel via drying in confined conditions, we applied this strategy to beef jerky manufacture for improving the quality and processing efficiency. In our study, beef strips were pre-stretched and then dried in a tensile state, and the confined conditions were achieved by controlling the stretched strains from 20% to 120%. Compared with the sample dried freely, beef jerky dried in confined conditions of different pre-stretching strains exhibited improved quality based on texture and sensory analysis. Additionally, this method also enhanced processing efficiency by reducing approximately 50% drying time. The excellent sensory quality and good texture of beef jerky were obtained as the pre-stretching strain was 80%. Drying beef strips in confined conditions made muscle fibers tense and enhanced hydrophobicity of myofibrillar proteins, leading to a compact structure with high shear force and anisotropy, and rapid water loss in beef jerky. This facile and green method provides a promising route to enrich the existing technologies of jerky processing.

Investigation of the physicochemical properties of the thin slices of dried pork meat paper mixed with squid

Globally, the Peruvian squid (Dosidicus gigas) has the highest productivity among squid species. However, due to its high-water content and astringent taste, it has limited fresh food value. This study used Peruvian squid meat as the primary material to prepare thin slices of dried squid meat paper mixed with pork. Here, different proportions (20, 40, 60, 80, and 100%, while 0% as the control group) of squid surimi have used to mix with pork for the meat paper preparation and the changes in physicochemical properties, microstructure, and sensory evaluation were analyzed. The results showed that the total volatile basic nitrogen (TVB-N) contents increased with the storage period, where 20% squid surimi substitution had the lowest TVB-N content. The 20% squid surimi substitution group had the highest expansion rate, the lowest peroxide value (PV), and moisture content. The food-borne microorganisms (E. coli, coliforms, and Salmonella spp.) were within the legal limits or negative. Hardness and crispiness, 20-40% squid surimi substitution were closely similar to the control group. This study has provided an effective investigation of the possibility of expanding the utilization of Peruvian squid resources by combining appropriate squid surimi with minced pork for high-quality thin slices of dried meat paper.

Drying Characteristics and Physicochemical Properties of Semi-Dried Restructured Sausage Depend on Initial Moisture Content

Semi-dried restructured sausages are restructured meat products with a high nutritional and economic value. However, excessively long drying times can have negative effects on the energy consumption, texture, and sensory properties of semi-dried restructured sausages. The objective of this study was to investigate the effects of different water contents on the drying and physicochemical characteristics of semi-dried restructured sausages. Sausages were prepared with different initial moisture contents (0%−50%) and drying time (0−580 min). The drying characteristics, including the drying rate, effective moisture diffusivity, and water activity of sausage were significantly improved as the initial moisture content was increased. When the initial moisture content of the sausage was 50%, physicochemical properties, such as color, porosity, shear force, and volatile basic nitrogen, were improved the most along with the decreased drying time. Scanning electron microscopy data showed greater porosity and pore size in sausages with the increase of initial moisture content. Collectively, our data suggest that an increase in the initial moisture content of semi-dried restructured sausages improves their drying characteristics and physicochemical properties.

Effect of Different Brine Injection Levels on the Drying Characteristics and Physicochemical Properties of Beef Jerky

Meat jerky is a type of meat snack with a long shelf life, light weight, and unique sensory properties. However, meat jerky requires a long manufacturing time, resulting in high energy consumption. In this study, beef jerky was prepared by injecting different concentrations of brine at different hot-air drying times (0–800 min). When the brine injection levels were increased to 30%, the drying characteristics of beef jerky, such as drying time and effective moisture diffusivity, were significantly improved owing to the relatively high water content and the formation of porous structures. The physicochemical properties (e.g. meat color, porosity, shear force, and volatile basic nitrogen) of the beef jerky injected with 30% brine were improved owing to the shortened drying time. Scanning electron microscopy images showed that the beef jerky structure became porous and irregular during the brine injection process. Our novel processing technique for manufacturing beef jerky leads to improved quality characteristics and shortened drying times.