Enhancing the storage stability of Pickering emulsion using esterified buckwheat starch with improved structure and morphology

Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the "flower center" can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

Unveiling the synergistic effect of octenyl succinic anhydride and pulsed electric field on starch nanoparticles

In this study, guinea starch nanoparticles (GSNP) were prepared by nanoprecipitation technique and modified with octenyl succinic anhydride (3 %) and pulsed electric field (1.5, 3.0, and 4.5 kV/cm). The effect of dual modification on the physicochemical, structural, morphological, thermo-pasting, and rheological properties of GSNP was investigated. The dual modification successfully incorporated octenyl groups into GSNP, as confirmed by 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. The degree of substitution increased from 0.0254 to 0.0347, with particle size ranging from 241.30 to 292.50 nm and zeta potential of -23.11 to -29.98 mV. TEM micrographs revealed that all SNP samples had self-aggregated granules with a mean size below 120 nm, and XRD confirmed a V-type crystalline structure. The amylose content and water absorption capacity decreased from 34.02 % to 24.63 % and from 2.45 to 1.91 g/g, respectively, while the oil absorption capacity and relative crystallinity increased from 3.42 to 4.01 g/g and from 17.82 % to 34.76 %, with modification. The gelatinization and degradation temperature of modified samples were higher while pasting properties exhibited variation with modification. The rheological properties of modified SNP samples exhibited more pronounced shear thinning, attributed to their weaker gel structure and fluid-like gel network. Overall, results suggested that modified GSNPs have potential for stabilizing Pickering emulsion and delivery of carrier materials for active functional substances.

Preserving plum perfection: Buckwheat starch edible coating with xanthan gum and lemongrass essential oil

The research focused on the fabrication of composite coatings using buckwheat starch (BS) and xanthan gum (XG) with incorporation of lemongrass (Cymbopogon citratus) essential oil (LEO) with varying concentration (0.75 %, 1.0 % and 1.25 % (w/v). BS was extracted from buckwheat groats (Fagopyrum esculentum) and its physico-chemical characteristics were determined. BS showed spherical and polygonal morphology and its XRD pattern was similar to starch extracted from other cereal sources. The amount of reducing sugar, starch and amylose content in extracted BS were 0.99 ± 0.33 %, 86.32 ± 0.22 % and 21.02 ± 1.89 % respectively, which indicates that BS is a suitable base material for the formation of edible coatings. XG was mixed with BS in different ratios (1:1, 2:1, 3:1 and 4:1) to optimize the best ratio of combination for composite coatings. The coating with a ratio of 2:1 was very smooth and was chosen for incorporation of LEO and the coatings physical, functional, mechanical, thermal and micro-structural characteristics were examined. The coating S5 with 1.25 % (w/v) concentration of LEO showed the best results with least moisture content (MC), minimum water vapor permeability (WVP) and maximum contact angle value. Moreover, the S5 formulation had the highest antioxidant (73.3 %) ability and maximum antimicrobial efficiency with inhibition zones of 22.09 ± 0.06 mm and 28.65 ± 0.14 mm against S. aureus and E. coli respectively. The coatings were then coated on plum fruit, and various parameters like weight loss, pH, shrinkage and TSS were calculated every 4th day during the 20 days of refrigeration period. The coated plums' ripening pace was delayed by the S5 formulation which improved moisture retention, maintained the plums' TSS value and overall pH. Therefore, composite coatings made up of BS, XG and 1.25 % (w/v) can be used as a cost-effective bio-active coating material for plum preservation under refrigeration conditions.

Deep-Eutectic-Solvent-in-Water Pickering Emulsions Stabilized by Starch Nanoparticles

Deep eutectic solvents (DESs) have received extensive attention in green chemistry because of their ease of preparation, cost-effectiveness, and low toxicity. Pickering emulsions offer advantages such as long-term stability, low toxicity, and environmental friendliness. The oil phase in some Pickering emulsions is composed of solvents, and DESs can serve as a more effective alternative to these solvents. The combination of DESs and Pickering emulsions can improve the applications of green chemistry by reducing the use of harmful chemicals and enhancing sustainability. In this study, a Pickering emulsion consisting of a DES (menthol:octanoic acid = 1:1) in water was prepared and stabilized using starch nanoparticles (SNPs). The emulsion was thoroughly characterized using various techniques, including optical microscopy, transmission microscopy, laser particle size analysis, and rheological measurements. The results demonstrated that the DES-in-water Pickering emulsion stabilized by the SNPs had excellent stability and retained its structural integrity for more than 200 days at room temperature (20 °C). This prolonged stability has significant implications for many applications, particularly in the field of storage and transportation. This Pickering emulsion based on DESs and SNPs is sustainable and stable, and it has great potential to improve green chemistry practices in various fields.

The Effect of Acid Hydrolysis on the Pickering Emulsifying Capacity of Tartary Buckwheat Flour

The effect of sulfuric acid hydrolysis on the Pickering emulsifying capacity of Tartary buckwheat flour (TBF) rich in starch was evaluated for the first time. The results indicate that the sulfuric acid concentration and hydrolysis time had a significant impact on the Pickering emulsifying capacity of acid-hydrolyzed Tartary buckwheat flour (HTBF). A low sulfuric acid concentration (1-2 mol/L) could reduce the particle size of HTBF, but it also decreased the Pickering emulsifying ability. At a sulfuric acid concentration of 3 mol/L, appropriate treatment time (2 and 3 days) led to particle aggregation but significantly improved wettability, thereby resulting in a rapid enhancement in emulsifying capacity. Under these conditions, the obtained HTBF (HTBF-D2-C3 and HTBF-D3-C3) could stabilize medium-chain triglyceride (MCT)-based Pickering high-internal-phase emulsions (HIPEs) with an oil-phase volume fraction of 80% at the addition amounts (c) of ≥1.0% and ≥1.5%, respectively. Its performance was significantly superior to that of TBF (c ≥ 2.0%). Furthermore, at the same addition amount, the droplet size of HIPEs constructed by HTBF-D3-C3 was smaller than that of HTBF-D2-C3, and its gel strength and microrheological performance were also superior to those of HTBF-D2-C3, which was attributed to the higher wettability of HTBF-D3-C3. The findings of this study can facilitate the in-depth application of Tartary buckwheat and provide references for the development of novel Pickering emulsifiers.

Valorization of guinea grass seed (Megathyrsus maximus): Synthesis and utilization of cellulose microfiber to reinforce esterified and cross-linked guinea starch films

The present study extracts starch from guinea grass seed and fiber from the starch extraction residue. The fibrous residue was chemically converted into cellulose microfiber (CMF) and used to reinforce the native, esterified and crosslinked guinea starch films. The films were developed with 5 % starch, 40 % glycerol and 0, 2.5, 5, and 10 % CMF based on the dry matter of starch. SEM images of all film samples showed good compatibility of CMF with starch molecules, and no fractures or pores were observed. Adding filler materials to modified starch films slightly increased the film thickness (0.24 to 0.30 mm) due to the high dimensions of CMF, which comprise a significant amount of the composite's volume. A synergetic effect of starch modification and CMF in films decreased the moisture content (21.98 to 9.21 %), water solubility (25.65 to 15.47 %), water vapor permeability (6.96×10-7 to 1.65×10-7g∙mm2∙day∙Pa), and elongation at the break (33.51 to 16.79 %) while increasing the tensile strength (1.84 to 3.85 MPa) and Young's modulus (5.49 to 22.93 MPa). The L* and a* values of the films decreased, and the b* and opacity values of the films increased with the addition of CMF. The XRD graph showed that all films have semicrystalline structures with peaks at 18°, 20°, and 22°, and the degree of crystallinity increases (32.3 to 55.1 %) with CMF. All film samples showed good thermal stability up to 315 °C. In conclusion, esterified starch-based films exhibited superior barrier properties and flexibility. On the contrary, cross-linked starch films demonstrated higher tensile strength and lower water solubility.

Starch-based particles as stabilizers for Pickering emulsions: modification, characteristics, stabilization, and applications

The potential utilization of starch as a particle-based emulsifier in the preparation of Pickering emulsions is gaining interest within the food industry. Starch is an affordable and abundant functional ingredient, which makes it an excellent candidate for the stabilization of Pickering emulsions. This review article focuses on the formation, stabilization, and properties of Pickering emulsions formulated using starch-based particles and their derivatives. First, methods of isolating and modifying starch-based particles are highlighted. The key parameters governing the properties of starch-stabilized Pickering emulsions are then discussed, including the concentration, size, morphology, charge, and wettability of the starch-based particles, as well as the type and size of the oil droplets. The physicochemical mechanisms underlying the ability of starch-based particles to form and stabilize Pickering emulsions are also discussed. Starch-based Pickering emulsions tend to be more resistant to coalescence than conventional emulsions, which is useful for some food applications. Potential applications of starch-stabilized Pickering emulsions are reviewed, as well as recent studies on their gastrointestinal fate. The information provided may stimulate the utilization of starch-based Pickering emulsions in food and other industries.

Structure and surface properties of ozone-conjugated octenyl succinic anhydride modified waxy rice starch: Towards high-stable Pickering emulsion

In the present work, a dual-modified waxy rice starch (OOWRS) fabricated with OSA and ozone was successfully used to stabilize the O/W Pickering emulsion. The molecular structure, surface properties, and underlying stabilizing mechanism were systematically investigated. The results showed that oxidation occurring on the surface of OSA-modified waxy rice starch (OSAWRS) resulted in the presence of indentations and cracks. The relative crystallinity of starch was generally decreased with increasing degree of oxidation. Due to the introduction of carbonyl and the variation in surface structure, the hydrophobicity and acidity of OSAWRS were significantly enhanced after the ozone treatment. Remarkably, OOWRS stabilized Pickering emulsion exhibited a feature of typical O/W emulsion, and the 0.5 h and 1 h OOWRS emulsion exhibited a more uniform droplet size as well as a higher surface potential. We also noted that a weak-gel network was formed within the OOWRS emulsion system as the hydrophilic starch chains played a bridging role. Two reasons for the improved stability of the emulsion were the special gel structure and the enhanced electrical repulsion among the droplets. This research provides that ozone-conjugated OSA modification is a promising strategy for improving the emulsion ability of starch-based Pickering emulsions.

Improving the emulsification performance of adlay seed starch by esterification combined with ultrasonication and enzymatic treatment

In this study, superior modified starch was prepared using ultrasonic and enzymatic treatments to confirm the potential of using adlay seed starch (ASS) in Pickering emulsions. Octenyl succinic anhydride (OSA)-modified starches, such as OSA-UASS, OSA-EASS, and OSA-UEASS, were prepared using ultrasonic, enzymatic, and combined ultrasonic and enzymatic treatments, respectively. The effects of these treatments on the structure and properties of ASS were evaluated to elucidate their influence on starch modification. Ultrasonic and enzymatic treatments improved the esterification efficiency of ASS by changing its external and internal morphological characteristics and the crystalline structure to provide more binding sites for esterification. The degree of substitution (DS) of ASS modified by these pretreatments was 22.3-51.1 % higher than that of the OSA-modified starch without pretreatment (OSA-ASS). Fourier transform infrared and X-ray photoelectron spectroscopy results confirmed the esterification. Small particle size and near-neutral wettability indicated that OSA-UEASS was the promising emulsification stabilizer. The emulsion prepared using OSA-UEASS exhibited better emulsifying activity and emulsion stability and long-term stability for up to 30 days. These amphiphilic granules with improved structure and morphology were used to stabilize a Pickering emulsion.

Starch physical treatment, emulsion formation, stability, and their applications

Pickering emulsions are increasingly preferred over typical surfactant-based emulsions due to several advantages, such as lower emulsifier usage, simplicity, biocompatibility, and safety. These types of emulsions are stabilized using solid particles, which produce a thick layer at the oil-water interface preventing droplets from aggregating. Starch nano-particles (SNPs) have received considerable attention as natural alternatives to synthetic stabilizers due to their unique properties. Physical formulation processes are currently preferred for SNP production since they are environmentally friendly procedures that do not require the use of chemical reagents. This review provides a thorough overview in a critical perspective of the physical processes to produce starch nano-particles used as Pickering emulsion stabilizers, fabricated by a 2-step process. Specifically, the reviewed physical approaches for nano-starch preparation include high hydrostatic pressure, high pressure homogenization, ultrasonication, milling and antisolvent precipitation. All the essential parameters used to evaluate the effectiveness of particles in stabilizing these systems are also presented in detail, including the hydrophobicity, size, and content of starch particles. Finally, this review provides the basis for future research focusing on physical nano-starch production, to ensure the widespread use of these natural stabilizers in the ever-evolving field of food technology.

Investigation into the chemical modification of α-amylase using octenyl succinic anhydride: enzyme characterisation and stability studies

The present study describes the chemical modification of α-amylase using succinic anhydride (SA), phthalic anhydride (PA) and a novel modifier viz. 2-octenyl succinic anhydride (2-OSA). SA-, PA- and 2-OSA-α-amylases displayed a 50%, 91% and 46% increase in stability at pH 9, respectively; as compared to unmodified α-amylase. PA-α-amylase showed a significant increase in Ea and ΔH_a^#, and a concomitant decrease in ΔS_a^#. The modified α-amylases exhibited improved thermostability as reflected by significant reductions in K_d and ΔS_d^#, and increments in t_1/2, D-, E_d, ΔH_d^# and ΔG_d^# values. The modified α-amylases displayed variable stabilities in the presence of different surfactants, inhibitors, metal ions and organic solvents. Interestingly, the chemical modification was found to confer resistance against inactivation by Hg²⁺ on α-amylase. The conformational changes in modified α-amylases were investigated using intrinsic tryptophan fluorescence, ANS (extrinsic) tryptophan fluorescence, and dynamic fluorescence quenching. Both intrinsic and extrinsic tryptophan fluorescence spectra showed increased fluorescence intensity for the modified α-amylases. Chemical modification was found to induce a certain degree of structural rigidity to α-amylase, as shown by dynamic fluorescence quenching. Analysis of the CD spectra by the K2d method using the DichroWeb online tool indicated evident changes in the α-helix, β-sheet and random coil fractions of the α-amylase secondary structure, following chemical modification using anhydrides. PA-α-amylase exhibited the highest productivity in terms of hydrolysis of starch at 60 °C over a period of 5 h indicating potential in varied biotechnological applications.