Production, characterization, evaluation and toxicity assessment of a Bacillus cereus UCP 1615 biosurfactant for marine oil spills bioremediation

Recent progress in microbial biosurfactants production strategies: Applications, technological bottlenecks, and future outlook

Biosurfactants are surface-active compounds produced by numerous microorganisms. They have gained significant attention due to their wide applications in food, pharmaceuticals, cosmetics, agriculture, and environmental remediation. The production efficiency and yield of microbial biosurfactants have improved significantly through the development and optimization of different process parameters. This review aims to provide an in-depth analysis of recent trends and developments in microbial biosurfactant production strategies, including submerged, solid-state, and co-culture fermentation. Additionally, review discusses biosurfactants' applications, challenges, and future perspectives. It highlights their advantages over chemical surfactants, emphasizing their biodegradability, low toxicity, and diverse chemical structures. However, the critical challenges in commercializing include high production costs and low yield. Strategies like genetic engineering, process optimization, and downstream processing, have been employed to address these challenges. The review provides insights into current commercial producers and highlights future perspectives such as novel bioprocesses, efficient microbial strains, and exploring their applications in emerging industries.

Evaluating the Safety of Bacillus cereus GW-01 Obtained from Sheep Rumen Chyme

Bacillus cereus is responsible for 1.4-12% food poisoning outbreaks worldwide. The safety concerns associated with the applications of B. cereus in health and medicine have been controversial due to its dual role as a pathogen for foodborne diseases and a probiotic in humans and animals. In this study, the pathogenicity of B. cereus GW-01 was assessed by comparative genomic, and transcriptome analysis. Phylogenetic analysis based on a single-copy gene showed clustering of the strain GW-01, and 54 B. cereus strains from the NCBI were classified into six major groups (I-VI), which were then associated with the source region and sequence types (STs). Transcriptome results indicated that the expression of most genes related with toxins secretion in GW-01 was downregulated compared to that in the lag phase. Overall, these findings suggest that GW-01 is not directly associated with pathogenic Bacillus cereus and highlight an insightful strategy for assessing the safety of novel B. cereus strains.

Performance evaluation of rhamnolipid biosurfactant produced by Pseudomonas aeruginosa and its effect on marine oil-spill remediation

This study aimed to reveal that the effect of biosurfactant on the dispersion and degradation of crude oil. Whole genome analysis showed that Pseudomonas aeruginosa GB-3 contained abundant genes involved in biosurfactant synthesis and metabolic processes and had the potential to degrade oil. The biosurfactant produced by strain GB-3 was screened by various methods. The results showed that the surface tension reduction activity was 28.6 mN·m-1 and emulsification stability was exhibited at different pH, salinity and temperature. The biosurfactant was identified as rhamnolipid by LC-MS and FTIR. The fermentation conditions of strain GB-3 were optimized by response surface methodology, finally the optimal system (carbon source: glucose, nitrogen source: ammonium sulfate, C/N ratio:16:1, pH: 7, temperature: 30-35 °C) was determined. Compared with the initial fermentation, the yield of biosurfactant increased by 4.4 times after optimization. In addition, rhamnolipid biosurfactant as a dispersant could make the dispersion of crude oil reach 38% within seven days, which enhanced the bioavailability of crude oil. As a biostimulant, it could also improve the activity of indigenous microorganism and increase the degradation rate of crude oil by 10-15%. This study suggested that rhamnolipid biosurfactant had application prospect in bioremediation of marine oil-spill.

Influences of extracellular polymeric substances (EPS) recovered from waste sludge on the ability of Jiaozhou Bay to self-remediate of diesel-polluted seawater

The introduction of EPS recovered from waste sludge may have an impact on the process of microbial remediation of oil-contaminated seawater. This study investigated the effect of EPS on the self-remediation capacity of diesel-polluted seawater in Jiaozhou Bay. Hydrocarbon attenuation and microbial activity were monitored in seawater collected from five islands after diesel and N, P addition, with and without EPS, incubated under aerobic conditions. Compared to seawater without EPS, degradation of TPH (total petroleum hydrocarbon) doubled and improved degradation of non-volatile (C16-C24) hydrocarbons to some extent in EPS-added seawater. The introduction of EPS led to changes in microbiota richness and diversity, significantly stimulating the growth of Proteobacteria and Firmicutes phyla or Bacillus and Pseudomonas genera. RT-qPCR analysis indicated EPS caused higher increases in cytochrome P450 gene copies than alkB. Prediction of alkane decay genes from 16S rRNA sequencing data revealed that EPS addition obviously promoted genes related to ethanol dehydrogenation function in the microbial community. Additionally, EPS enhanced the enzymatic activities of alkane hydroxylase, ethanol dehydrogenase, phosphatase and lipase, but increased protease and catalase inconspicuously. The above outlook that environmental sustainability of EPS from waste sludge for diesel-contaminated seawater remediation may provide new perspectives for oil spill bioremediation.

Impact of biosurfactant produced by Bacillus spp. on biodegradation efficiency of crude oil and anthracene

Biosurfactants are surface active molecules generated by various microorganisms, including bacteria, actinobacteria, algae, and fungi. In this study, bacterial strains are isolated from soil contaminated with used motor oil and examined for potential biosurfactant production. A minimum salt medium (MSM), with crude oil as the only carbon source, is used to isolate potential biosurfactant-producing bacterial strains. About 23 strains are isolated, and all are subjected to the primary screening methods for biosurfactant production. Based on the emulsification index, oil displacement, and drop collapse screening methods, two isolates with potential biosurfactant-producing ability are selected for further studies. The synthesis of biosurfactants, crude oil and anthracene biodegradation is carried out with strains DTS1 and DTS2. Both strains show significant outcomes in crude oil degradation. In addition, both strains can utilize anthracene as the sole carbon source. During the degradation course, changes in the growth conditions are continuously monitored by measuring turbidity and pH. In this degradation study, the biosurfactant production aptitude of the isolated strains plays an essential role in increasing the bioavailability of hydrophobic hydrocarbons. These strains are identified down to the molecular level by employing 16S rRNA gene sequencing, and the acquired sequences are submitted to get the accession numbers. These prospective strains can be utilized to remediate hydrocarbon-contaminated environments.

Candida krusei M4CK Produces a Bioemulsifier That Acts on Melaleuca Essential Oil and Aids in Its Antibacterial and Antibiofilm Activity

Surface-active compounds (SACs) of microbial origin are an active group of biomolecules with potential use in the formulation of emulsions. In this sense, the present study aimed to isolate and select yeasts from fruits that could produce SACs for essential oil emulsions. The Candida krusei M4CK was isolated from the Byrsonima crassifolia fruit to make SACs. This emulsification activity (E24) was equal to or greater 50% in all carbon sources, such as olive oil, sunflower oil, kerosene, hexane, and hexadecane. E24 followed exponential growth according to the growth phase. The stability of emulsions was maintained over a wide range of temperatures, pH, and salinity. The OMBE4CK (melaleuca essential oil emulsion) had better and more significant inhibitory potential for biofilm reduction formation. In addition, bioemulsifier BE4CK alone on Escherichia coli and Pseudomonas aeruginosa biofilm showed few effective results, while there was a significant eradication for Staphylococcus aureus biofilms. The biofilms formed by S. aureus were eradicated in all concentrations of OMBE4CK. At the same time, the preformed biofilm by E. coli and P. aeruginosa were removed entirely at concentrations of 25 mg/mL, 12.5 mg/mL, and 6.25 mg/mL. The results show that the bioemulsifier BE4CK may represent a new potential for antibiofilm application.

Exploring the bioremediation capability of petroleum-contaminated soils for enhanced environmental sustainability and minimization of ecotoxicological concerns

The bioremediation of soils contaminated with petroleum hydrocarbons (PHCs) has emerged as a promising approach, with its effectiveness contingent upon various types of PHCs, i.e., crude oil, diesel, gasoline, and other petroleum products. Strategies like genetically modified microorganisms, nanotechnology, and bioaugmentation hold potential for enhancing remediation of polycyclic aromatic hydrocarbon (PAH) contamination. The effectiveness of bioremediation relies on factors such as metabolite toxicity, microbial competition, and environmental conditions. Aerobic degradation involves enzymatic oxidative reactions, while bacterial anaerobic degradation employs reductive reactions with alternative electron acceptors. Algae employ monooxygenase and dioxygenase enzymes, breaking down PAHs through biodegradation and bioaccumulation, yielding hydroxylated and dihydroxylated intermediates. Fungi contribute via mycoremediation, using co-metabolism and monooxygenase enzymes to produce CO2 and oxidized products. Ligninolytic fungi transform PAHs into water-soluble compounds, while non-ligninolytic fungi oxidize PAHs into arene oxides and phenols. Certain fungi produce biosurfactants enhancing degradation of less soluble, high molecular-weight PAHs. Successful bioremediation offers sustainable solutions to mitigate petroleum spills and environmental impacts. Monitoring and assessing strategy effectiveness are vital for optimizing biodegradation in petroleum-contaminated soils. This review presents insights and challenges in bioremediation, focusing on arable land safety and ecotoxicological concerns.

Shrimp laccase degrades polycyclic aromatic hydrocarbons from an oil spill disaster in Brazil: A tool for marine environmental bioremediation

Our work aims to purify, characterize and evaluate a laccase from by-products of the shrimp farming industry (Litopenaeus vannamei) for the degradation of Polycyclic Aromatic Hydrocarbons (PAHs) from 2019 oil spill in Brazilian coast. The enzyme was purified by affinity chromatography and characterized as thermostable, with activity above 90 °C and at alkaline pH. In addition, the laccase was also tolerant to copper, lead, cadmium, zinc, arsenic, hexane and methanol, with significant enzymatic activation in acetone and 10 mM mercury. Concerning PAHs' degradation, the enzyme degraded 42.40 % of the total compounds, degrading >50 % of fluorene, C4-naphthalenes, C3-naphthalenes, C2-naphthalenes, anthracene, acenaphthene, 1-methylnaphthalene and 2-methylnaphthalene. Thus, this laccase demonstrated important characteristics for bioremediation of marine environments contaminated by crude oil spills, representing a viable and ecological alternative for these purposes.

Biotechnological potential of microbial bio-surfactants, their significance, and diverse applications

Globally, there is a huge demand for chemically available surfactants in many industries, irrespective of their detrimental impact on the environment. Naturally occurring green sustainable substances have been proven to be the best alternative for reducing reliance on chemical surfactants and promoting long-lasting sustainable development. The most frequently utilized green active biosurfactants, which are made by bacteria, yeast, and fungi, are discussed in this review. These biosurfactants are commonly originated from contaminated sites, the marine ecosystem, and the natural environment, and it holds great potential for environmental sustainability. In this review, we described the importance of biosurfactants for the environment, including their biodegradability, low toxicity, environmental compatibility, and stability at a wide pH range. In this review, we have also described the various techniques that have been utilized to characterize and screen the generation of microbial biosurfactants. Also, we reviewed the potential of biosurfactants and its emerging applications in the foods, cosmetics, pharmaceuticals, and agricultural industries. In addition, we also discussed the ways to overcome problems with expensive costs such as low-cost substrate media formulation, gravitational techniques, and solvent-free foam fractionation for extraction that could be employed during biosurfactant production on a larger scale.

Green dispersants for oil spill response: A comprehensive review of recent advances

Green dispersants are so-called "green" because they are renewable (from bio-based sources), non-volatile (from ionic liquids), or are from naturally available solvents (vegetable oils). In this review, the effectiveness of different types of green dispersants, namely, protein isolates and hydrolysates from fish and marine wastes, biosurfactants from bacterial and fungal strains, vegetable-based oils such as soybean lecithin and castor oils, as well as green solvents like ionic liquids are reviewed. The challenges and opportunities offered by these green dispersants are also elucidated. The effectiveness of these dispersants varies widely and depends on oil type, dispersant hydrophilicity/hydrophobicity, and seawater conditions. However, their advantages lie in their relatively low toxicity and desirable physico-chemical properties, which make them potentially ecofriendly and effective dispersants for future oil spill response.

Ultralight and highly efficient oil-water selective aerogel from carboxymethyl chitosan and oxidized β-cyclodextrin for marine oil spill cleanup

Biomass-based aerogels for oil spill cleanup have attracted tremendous research interests due to their feasibility in oil-water separation. However, the cumbersome preparation process and toxic cross-linking agents hinder their application. In this work, a facile and novel method to prepare hydrophobic aerogels is reported for the first time. Da-β-CD/CMCS aerogel (DCA), Da-β-CD/CMCS/PVA aerogel (DCPA), and hydrophobic Da-β-CD/CMCS/PVA aerogel (HDCPA) were successfully synthesized via the Schiff base reaction between carboxymethyl chitosan (CMCS) and dialdehyde β-cyclodextrin (Da-β-CD). Meanwhile, polyvinyl alcohol (PVA) acted as reinforcement and hydrophobic modification was conducted via chemical vapor deposition (CVD). The structure, mechanical properties, hydrophobic behaviors and absorption performance of aerogels were comprehensively characterized. The results indicated that the DCPA containing 7 % PVA exhibited excellent compressibility and elasticity even at a compressive strain of ε = 60 %, however, the DCA without PVA showed incompressibility, suggesting that the important role played by PVA in improving compressibility. Moreover, HDCPA possessed excellent hydrophobicity (water contact angle up to 148.4°), which could be well maintained after experiencing wear and corrosion in harsh environments. HDCPA also possesses high absorption capacities (24.4-56.5 g/g) towards different oils with satisfied recyclability. These advantages endow HDCPA with great potential and application prospects in offshore oil spill cleanup.

In vitro nematicidal and acaricidal effect of biosurfactants produced by Bacillus against the root-knot nematode Nacobbus aberrans and the dust mite Tyrophagus putrescentiae

In the present study, the nematicidal and acaricidal activity of three biosurfactants (BS) produced by strains of the Bacillus genus was evaluated. The BS produced by the Bacillus ROSS2 strain presented a mortality of 39.29% in juveniles (J2) of Nacobbus aberrans at a concentration of 30 mg/mL, this same strain is the one that presented the highest mortality in Tyrophagus putrescentiae, which was 57.97% at a concentration of 39 mg/mL. The BS were qualitatively identified by thin layer chromatography and are lipid in nature based on the retention factor (Rf). While the GC-MS analysis identified two main compounds that are 4,7-Methano-1H-indene-2,6-dicarboxylic acid, 3a,4,7,7a-tetrahydro-1, and Methyl 4-(pyrrol-1-yl)-1,2,5-oxadiazole-3-carboxylate1, which is the polar part indicated by the presence of dicarboxylic acid and carboxylate groups; while the non-polar portion can be interpreted as a hydrocarbon chain of variable length. Based on the present results, BS can be an alternative for the biocontrol of the root-knot nematode N. aberrans and the mite T. putrescentiae.

Application of Plant Surfactants as Cleaning Agents in Shampoo Formulations

With the increased demand for sustainable, hypoallergenic products, plant surfactants are a promising, eco-friendly option for cleaning products due to their low toxicity or even the absence of toxicity. In the present study, surfactant-rich extracts from Chenopodium quinoa, Glycine max, and Malpighia emarginata were assessed for their stability, antioxidant capacity, toxic potential, and cleaning potential in shampoo formulations. The surfactants in the extracts were isolated and characterized by NMR, UV-Vis, and FTIR spectroscopy. The results demonstrated that the extracts remained stable within the temperature and pH ranges tested. The antioxidant properties were also determined. In the analysis of irritation potential, G. max and C. quinoa exhibited low toxicity and no toxicity, respectively. The cleaning potential analysis confirmed that the extracts could be used as primary surfactants. Seven shampoo formulations were developed, which showed potential to reduce surface tension to the range of 27.1–31.7 mN/m and interfacial tension to the range of 5.4–7.3 mN/m. The wettability, percentage of solids, density, pH, and dirt dispersion of the formulas were within standard ranges, and the sebum removal capacity of the seven formulations was similar to or even better than that of a commercial shampoo.

The In Vitro, Ex Vivo, and In Vivo Effect of Edible Oils: A Review on Cell Interactions

Consumption of edible oils is a significant part of the dietary pattern in the developed and developing world. Marine and vegetable oils are assumed to be part of a healthy food pattern, especially if one takes into account their potential role in protecting against inflammation, cardiovascular disease, and metabolic syndrome due to the presence of polyunsaturated fatty acids and minor bioactive compounds. Exploring the potential effect of edible fats and oils on health and chronic diseases is an emerging field worldwide. This study reviews the current knowledge of the in vitro, ex vivo, and in vivo effect of edible oils in contact with various cell types and aims to demonstrate which nutritional and bioactive components of a variety of edible oils present biocompatibility, antimicrobial properties, antitumor activity, anti-angiogenic activity, and antioxidant activity. Through this review, a wide variety of cell interactions with edible oils and their potential to counteract oxidative stress in pathological conditions are presented as well. Moreover, the gaps in current knowledge are also highlighted, and future perspectives on edible oils and their health benefits and potential to counteract a wide variety of diseases through possible molecular mechanisms are also discussed.

Biodegradation of oil-contaminated aqueous ecosystem using an immobilized fungi biomass and kinetic study

Remediation of environmental oil pollution with the usage of fungal organisms has proven to be a successful cleanup bioremediation method for organic contaminants. To investigate the breakdown of oil pollutants in water environments, biosurfactant-producing fungi have been isolated from oil-polluted soil samples. 16s rRNA sequencing technique was performed to identify the fungal organism and phylogenetic tree has been constructed. A variety of biosurfactant screening tests have demonstrated the better biosurfactant producing ability of fungi. The emulsion's stability, which is essential for the biodegradation process, was indicated by the emulsification index of 68.48% and emulsification activity of 1.3. In the isolated biosurfactant, important functional groups such as amino groups, lipids, and sugars were found according to thin layer chromatography analysis with a maximum retention value of 0.85. A maximum oil degradation of around 64% was observed with immobilized beads within 12 days. The half-life, and degradation removal rate constant of 20.21 days and 0.03 day^-1, respectively, have been determined by the degradation kinetic analysis. GCMS analysis confirmed the highly degraded hydrocarbons such as nonanoic acid and pyrrolidine. The immobilized fungi exhibit better oil biodegradability in aqueous solutions.

Sustainable production of biosurfactants via valorisation of industrial wastes as alternate feedstocks

Globally, the rapid increase in the human population has given rise to a variety of industries, which have produced a variety of wastes. Due to their detrimental effects on both human and environmental health, pollutants from industry have taken centre stage among the various types of waste produced. The amount of waste produced has therefore increased the demand for effective waste management. In order to create valuable chemicals for sustainable waste management, trash must be viewed as valuable addition. One of the most environmentally beneficial and sustainable choices is to use garbage to make biosurfactants. The utilization of waste in the production of biosurfactant provides lower processing costs, higher availability of feedstock and environmental friendly product along with its characteristics. The current review focuses on the use of industrial wastes in the creation of sustainable biosurfactants and discusses how biosurfactants are categorized. Waste generation in the fruit industry, agro-based industries, as well as sugar-industry and dairy-based industries is documented. Each waste and wastewater are listed along with its benefits and drawbacks. This review places a strong emphasis on waste management, which has important implications for the bioeconomy. It also offers the most recent scientific literature on industrial waste, including information on the role of renewable feedstock for the production of biosurfactants, as well as the difficulties and unmet research needs in this area.

A review on biosurfactant producing bacteria for remediation of petroleum contaminated soils

The discharge of potentially toxic petroleum hydrocarbons into the environment has been a matter of concern, as these organic pollutants accumulate in many ecosystems due to their hydrophobicity and low bioavailability. Petroleum hydrocarbons are neurotoxic and carcinogenic organic pollutants, extremely harmful to human and environmental health. Traditional treatment methods for removing hydrocarbons from polluted areas, including various mechanical and chemical strategies, are ineffective and costly. However, many indigenous microorganisms in soil and water can utilise hydrocarbon compounds as sources of carbon and energy and hence, can be employed to degrade hydrocarbon contaminants. Therefore, bioremediation using bacteria that degrade petroleum hydrocarbons is commonly viewed as an environmentally acceptable and effective method. The efficacy of bioremediation can be boosted further by using potential biosurfactant-producing microorganisms, as biosurfactants reduce surface tension, promote emulsification and micelle formation, making hydrocarbons bio-available for microbial breakdown. Further, introducing nanoparticles can improve the solubility of hydrophobic hydrocarbons as well as microbial synthesis of biosurfactants, hence establishing a favourable environment for microbial breakdown of these chemicals. The review provides insights into the role of microbes in the bioremediation of soils contaminated with petroleum hydrocarbons and emphasises the significance of biosurfactants and potential biosurfactant-producing bacteria. The review partly focusses on how nanotechnology is being employed in different critical bioremediation processes.

Recent advances of biosurfactant for waste and pollution bioremediation: Substitutions of petroleum-based surfactants

Biosurfactant is one of the emerging compounds in the industrial sector that behaves similarly with their synthetic counterparts, as they can reduce surface and interfacial tension between two fluids. Their unique properties also enable biosurfactant molecules to be able to clump together to form micelles that can capture targeted molecules within a solution. Biosurfactants are compared with synthetic surfactants on various applications for which the results shows that biosurfactants are fully capable of replacing synthetic surfactants in applications including enhanced oil recovery and wastewater treatment applications. Biosurfactants are able to be used in different applications as well since they are less toxic than synthetic surfactants. These applications include bioremediation on oil spills in the marine environment and bioremediation for contaminated soil and water, as well as a different approach on the pharmaceutical applications. The future of biosurfactants in the pharmaceutical industry and petroleum industry as well as challenges faced for implementing biosurfactants into large-scale applications are also discussed at the end of this review.

Surface-Active Compounds Produced by Microorganisms: Promising Molecules for the Development of Antimicrobial, Anti-Inflammatory, and Healing Agents

Surface-active compounds (SACs), biomolecules produced by bacteria, yeasts, and filamentous fungi, have interesting properties, such as the ability to interact with surfaces as well as hydrophobic or hydrophilic interfaces. Because of their advantages over other compounds, such as biodegradability, low toxicity, antimicrobial, and healing properties, SACs are attractive targets for research in various applications in medicine. As a result, a growing number of properties related to SAC production have been the subject of scientific research during the past decade, searching for potential future applications in biomedical, pharmaceutical, and therapeutic fields. This review aims to provide a comprehensive understanding of the potential of biosurfactants and emulsifiers as antimicrobials, modulators of virulence factors, anticancer agents, and wound healing agents in the field of biotechnology and biomedicine, to meet the increasing demand for safer medical and pharmacological therapies.

Microbial biosurfactants: a review of recent environmental applications

Microbial biosurfactants are low-molecular-weight surface-active compounds of high industrial interest owing to their chemical properties and stability under several environmental conditions. The chemistry of a biosurfactant and its production cost are defined by the selection of the producer microorganism, type of substrate, and purification strategy. Recently, biosurfactants have been applied to solve or contribute to solving some environmental problems, with this being their main field of application. The most referenced studies are based on the bioremediation of contaminated soils with recalcitrant pollutants, such as hydrocarbons or heavy metals. In the case of heavy metals, biosurfactants function as chelating agents owing to their binding capacity. However, the mechanism by which biosurfactants typically act in an environmental field is focused on their ability to reduce the surface tension, thus facilitating the emulsification and solubilization of certain pollutants (in-situ biostimulation and/or bioaugmentation). Moreover, despite the low toxicity of biosurfactants, they can also act as biocidal agents at certain doses, mainly at higher concentrations than their critical micellar concentration. More recently, biosurfactant production using alternative substrates, such as several types of organic waste and solid-state fermentation, has increased its applicability and research interest in a circular economy context. In this review, the most recent research publications on the use of biosurfactants in environmental applications as an alternative to conventional chemical surfactants are summarized and analyzed. Novel strategies using biosurfactants as agricultural and biocidal agents are also presented in this paper.

Oil spills: impacts and perspectives of treatment technologies with focus on the use of green surfactants

Oil spills into the oceans cause irreparable damage to marine life and harms the coastal population of the affected areas. The main measures to be taken in response to an oil spill are to reduce the impact on marine life, prevent oil from reaching the shore through its recovery, and accelerate the degradation of unrecovered oil. Any environmental damage can be reduced if the spilled oil is removed from the water quickly and efficiently. Therefore, it is essential to know the treatment strategies for spilled oils. Several technologies are currently available, including booms, skimmers, in situ burning, use of adsorbents, dispersants/surfactants, and bioremediation. The selection of the type of treatment will depend not only on the effectiveness of the technique, but mainly on the type of oil, amount spilled, location, weather, and sea conditions. In this review, the characteristics of oil spills, their origin, destination, and impacts caused, including major accidents around the world, are initially addressed. Then, the main physical, chemical, and biological treatment technologies are presented, describing their advances, advantages, and drawbacks, with a focus on the use of green surfactants. These agents will be described in detail, showing the evolution of research, recent studies, patents, and commercialized products. Finally, the challenges that remain due to spills, the necessary actions, and the prospects for the development of existing treatment technologies are discussed, which must be linked to the use of combined techniques.

Effect of petroleum hydrocarbon pollution levels on the soil microecosystem and ecological function

Petroleum hydrocarbon pollution is a global problem. However, the effects of different petroleum pollution levels on soil microbial communities and ecological functions are still not clear. In this study, we analyzed the changes in microbial community structures and carbon and nitrogen transformation functions in oil-contaminated soils at different concentrations by chemical analysis, high-throughput sequencing techniques, cooccurrence networks, and KEGG database comparison functional gene annotation. The results showed that heavy petroleum concentrations (petroleum concentrations greater than 20,000 mg kg^-1) significantly decreased soil microbial diversity (p = 0.01), soil microbiome network complexity, species coexistence patterns, and prokaryotic carbon and nitrogen fixation genes. In medium petroleum contamination (petroleum concentrations of between 4000 mg kg^-1 and 20,000 mg kg^-1), microbial diversity (p > 0.05) and carbon and nitrogen transformation genes showed no evident change but promoted species coexistence patterns. Heavy petroleum contamination increased the Proteobacteria phylum abundance by 3.91%-57.01%, while medium petroleum contamination increased the Actinobacteria phylum abundance by 1.69%-0.26%. The results suggested that petroleum concentrations played a significant role in shifting soil microbial community structures, ecological functions, and species diversities.

Isolation and Characterization of a Biosurfactant Producing Strain Planococcus sp. XW-1 from the Cold Marine Environment

One cold-adapted strain, named Planococcus sp. XW-1, was isolated from the Yellow Sea. The strain can produce biosurfactant with petroleum as sole source of carbon at low temperature (4 °C). The biosurfactant was identified as glycolipid-type biosurfactant species by thin-layer chromatography (TLC) and Fourier transform infrared spectroscopy (FTIR). It reduced the surface tension of water to 26.8 mN/m with a critical micelle concentration measurement of 60 mg/L. The produced biosurfactant possesses high surface activity at wide ranges of temperature (-18-105 °C), pH values (2-12), and salt concentrations (1-18%). The biosurfactant exhibited higher surface activity and higher growth rate of cells with hexadecane and diesel as carbon source. The strain Planococcus sp. XW-1 was also effective in degrading crude oil, after 21 days of growth at 4 °C in medium with 1% crude oil and 1% (v/v) bacteria broth, 54% of crude oil was degraded. The results suggest that Planococcus sp. XW-1 is a promising candidate for use in the bioremediation of petroleum-contaminated seawater in the Yellow Sea during winter. This study reported for the first time that Planococcus isolated from the Yellow Sea can produce biosurfactant using petroleum as the sole carbon source at low temperature (4 °C), showing its ecological role in the remediation of marine petroleum pollution.

Green Synthesis of Silver Nanoparticles Using a Biosurfactant from Bacillus cereus UCP 1615 as Stabilizing Agent and Its Application as an Antifungal Agent

Silver nanoparticles have great potential in a wide range of applications. Therefore, the purpose of this work was to synthesize, in a simple and green way, via the Tollens method, silver nanoparticles (AgNPs), using as a stabilizer the biosurfactant produced by Bacillus cereus UCP 1615 cultivated in a low-cost medium, with waste frying oil as a substrate. The obtained nanoparticles were identified and morphologically characterized using ultraviolet/visible (UV/vis) spectroscopy, scanning electron microscopy (SEM), and zeta potential. The maximum UV/vis absorption was observed at 400 nm for newly formed silver nanoparticles, while, for silver nanoparticles stored for 120 days, the peak was observed at 430 nm. SEM micrographs confirmed the formation of nanoparticles, with predominantly spherical structures. The average size of the formed nanoparticles was estimated to be 20 nm. The presence of the biosurfactant promoted stability, as a zeta potential of −23.4 mV was observed. The antimicrobial potential of AgNPs was evaluated at different concentrations against three pathogenic fungi (Aspergillus niger, Penicillium fellutanum, and Cladosporium cladosporioides). No less than 100% and 85% inhibitions of P. fellutanum and A. niger growth were observed, respectively, at the AgNP concentration of 16.50 µg/mL in potato dextrose agar medium. These results suggest the potential use of the biosurfactant as a stabilizer for silver nanoparticles and its application as an antimicrobial agent.

Application of a Biosurfactant Produced by Bacillus cereus UCP 1615 from Waste Frying Oil as an Emulsifier in a Cookie Formulation

Biosurfactants have attracted increasing interest from the food industry due to their emulsifying, foaming and solubilizing properties. However, the industrial use of microbial biosurfactants has been hampered by the high production costs related mainly to the use of expensive substrates. The search for low-cost alternative substrates is one of the strategies adopted to overcome this problem. In the present study, a biosurfactant produced by Bacillus cereus UCP1615 by fermentation in a medium supplemented with waste frying soybean oil as a low-cost substrate was evaluated as a bioemulsifier for the production of cookies. The biosurfactant was evaluated for its emulsifying capacity against different vegetable oils, antioxidant activity and toxicity, demonstrating favorable results for use in food. In particular, it showed satisfactory antioxidant activity at the tested concentrations and no cytotoxicity to the L929 (mouse fibroblast) and Vero (monkey kidney epithelial) cell lines using the MTT assay. The biosurfactant was then added at different concentrations (0.25%, 0.5% and 1%) to a standard cookie dough formulation to evaluate the physicochemical characteristics of the product. Cookies formulated with the biosurfactant exhibited similar energy and physical characteristics to those obtained with the standard formulation but with a lower moisture content. The biosurfactant also ensured a good preservation of the cookie texture after 45 days of storage. These results suggest that the biosurfactant has a potential application as a green emulsifier in accordance with the demands of the current market for biocompatible products.

Production, Characterization and Commercial Formulation of a Biosurfactant from Candida tropicalis UCP0996 and Its Application in Decontamination of Petroleum Pollutants

Contamination by oil and its derivatives causes serious damage to the environment, motivating the development of innovative technologies for the removal of these contaminants, such as the use of biosurfactants. In the present study, the biosurfactant from Candida tropicalis UCP0996 produced in the low cost-medium formulated with molasses, residual frying oil, and corn steep liquor, was characterized and its toxicity, formulation, and application in removal and biodegradation of oil were investigated. The surface tension of the medium was reduced to 30.4 mN/m, yielding 4.11 g/L of isolated biosurfactant after 120 h. Tests under extreme environmental conditions indicated the stability of the biosurfactant. Chemical characterization by thin layer chromatography (TLC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR), and gas chromatography and mass spectroscopy (CG-MS) revealed the glycolipidic nature of the biosurfactant. The isolated biosurfactant showed no toxicity against the microcrustacean Artemia salina, while the properties of the formulated biosurfactant remained stable during 120 days of storage. The biosurfactant removed 66.18% of motor oil adsorbed in marine stones and dispersed 70.95% of oil in seawater. The biosurfactant was also able to increase by 70% the degradation of motor oil by seawater indigenous microorganisms, showing great potential to be applied as a commercial additive in the bioremediation of oil spills.

Development and Genetic Engineering of Hyper-Producing Microbial Strains for Improved Synthesis of Biosurfactants

Current research energies are fixated on the synthesis of environmentally friendly and non-hazardous products, which include finding and recognizing biosurfactants that can substitute synthetic surfactants. Microbial biosurfactants are surface-active compounds synthesized intracellularly or extracellularly. To use biosurfactants in various industries, it is essential to understand scientific engagements that demonstrate its potentials as real advancement in the 21st century. Other than applying a substantial effect on the world economic market, engineered hyper-producing microbial strains in combination with optimized cultivation parameters have made it probable for many industrial companies to receive the profits of 'green' biosurfactant innovation. There needs to be an emphasis on the worldwide state of biosurfactant synthesis, expression of biosurfactant genes in expressive host systems, the recent developments, and prospects in this line of research. Thus, molecular dynamics with respect to genetic engineering of biosynthetic genes are proposed as new biotechnological tools for development, improved synthesis, and applications of biosurfactants. For example, mutant and hyper-producing recombinants have been designed efficaciously to advance the nature, quantity, and quality of biosurfactants. The fastidious and deliberate investigation will prompt a comprehension of the molecular dynamics and phenomena in new microorganisms. Throughout the decade, valuable data on the molecular genetics of biosurfactant have been produced, and this solid foundation would encourage application-oriented yields of the biosurfactant production industry and expand its utilization in diverse fields. Therefore, the conversations among different interdisciplinary experts from various scientific interests such as microbiology, biochemistry, molecular biology, and genetics are indispensable and significant to accomplish these objectives.

Characterization and Cytotoxic Effect of Biosurfactants Obtained from Different Sources

In this work, five biosurfactant extracts, obtained from different sources, all of them with demonstrated antimicrobial properties, were characterized and subjected to a cytotoxic study using mouse fibroblast cells (NCTC clone 929). Biosurfactant extracts obtained directly from corn steep water (CSW) showed similar surfactant characteristics to those of the extracellular biosurfactant extract produced by Bacillus isolated from CSW and grown in tryptic soy broth, observing that they are amphoteric, consisting of viscous and yellowish liquid with no foaming capacity. Contrarily, cell-bound biosurfactant extracts produced from Lactobacillus pentosus or produced by Bacillus sp isolated from CSW are nonionic, consisting of a white powder with foaming capacity. All the biosurfactants possess a similar fatty acid composition. The cytotoxic test revealed that the extracts under evaluation, at a concentration of 1 g/L, were not cytotoxic for fibroblasts (fibroblast growth > 90%). The biosurfactant extract obtained from CSW with ethyl acetate, at 1 g/L, showed the highest cytotoxic effect but above the cytotoxicity limit established by the UNE-EN-ISO10993-5. It is remarkable that the cell-bound biosurfactant produced by L. pentosus, at a concentration of 1 g/L, promoted the growth of the fibroblast up to 113%.