An assessment workflow to recover microplastics from complex biological matrices

Microplastic burden in native (Cambarus appalachiensis) and non-native (Faxonius cristavarius) crayfish along semi-rural and urban streams in southwest Virginia, USA

Our comparative assessment is the first study to investigate microplastic body burden in native (Cambarus appalachiensis) and non-native (Faxonius cristavarius) crayfish along a semi-rural and urban stream across different seasons. Crayfish, sediment, and surface water were collected, processed, and characterized using μRaman spectroscopy to compare microplastic polymer types and shapes across compartments. Average surface water concentrations were significantly higher in our urban stream compared to our semi-rural stream (17.3 ± 2.4 particles/L and 9.9 ± 1.3 particles/L, respectively; P = 0.015). Average sediment concentrations were similar between urban and semi-rural streams (140 ± 14.5 particles/kg and 139 ± 22.5 particles/kg, respectively; P = 0.957). Our findings showed a significant interactive effect of season, site, and nativity (i.e., species) regarding microplastic body burden in crayfish (P = 0.004). The smaller, non-native crayfish amassed more microplastic particles than the native crayfish (0.4-2.0 particles/g versus 0.4-0.8 particles/g, respectively). Fibers and fragments were the most common polymer shapes across compartments, with white and black being the dominant particle colors. Our study identified 13 plastic polymer types in crayfish and three in surface water and sediment; polypropylene was the most common polymer across compartments. This study provides evidence that crayfish body burden of microplastics can differ across species, seasons, and locations, highlighting the need for future studies to consider that sublethal impacts associated with microplastic body burden may vary by region and species.

Recent Study of Separation and Identification of Micro- and Nanoplastics for Aquatic Products

Micro- and nanoplastics (MNPs) are polymeric compounds widely used in industry and daily life. Although contamination of aquatic products with MNPs exists, most current research on MNPs focuses on environmental, ecological, and toxicological studies, with less on food safety. Currently, the extent to which aquatic products are affected depends primarily on the physical and chemical properties of the consumed MNPs and the content of MNPs. This review presents new findings on the occurrence of MNPs in aquatic products in light of their properties, carrier effects, chemical effects, seasonality, spatiality, and differences in their location within organisms. The latest studies have been summarized for separation and identification of MNPs for aquatic products as well as their physical and chemical properties in aquatic products using fish, bivalves, and crustaceans as models from a food safety perspective. Also, the shortcomings of safety studies are reviewed, and guidance is provided for future research directions. Finally, gaps in current knowledge on MNPs are also emphasized.

Effect of monsoon on microplastic bioavailability and ingestion by zooplankton in tropical coastal waters of Sabah

Plankton seasonality in tropical coastal waters is becoming more apparent as a result of monsoon-driven changes in environmental conditions, but research on the monsoonal variation of microplastics (MP) is still limited. We examined the monsoonal variation of MP in the water column and their ingestion by zooplankton in Sepanggar Bay, Sabah, Malaysia. MP concentrations were significantly higher during the Southwest monsoon whereas MP ingestions showed no monsoonal difference across major zooplankton taxa. Canonical Correspondence Analysis (CCA) and Generalized Additive Models (GAM) indicate that MP concentrations were driven by changes in rainfall and salinity while MP bioavailability to zooplankton was consistent regardless of monsoon. MP ingestion increased progressively up the planktonic food chain, and bioavailability of fibers and small-sized MP of high-density polymers to zooplankton was proportionately higher. Distinct changes in the MP concentration relative to the monsoons provide new insights into the seasonal variation of MP in tropical coastal ecosystems.

An ultra-light sustainable sponge for elimination of microplastics and nanoplastics

The currently established tools and materials for elimination of the emerging contaminants from environmental and food matrices, particularly micro- and nano-scale plastics, have been largely limited by complicated preparation/operation, high cost, and poor degradability. Here we show that, crosslinking naturally occurring corn starch and gelatin produces ultralight porous sponge upon freeze-drying that can be readily enzymatically decomposed to glucose; The sponge affords capture of micro- and nano-scale plastics into its pores by simple pressing in an efficiency up to 90% while preserving excellent mechanical strength. Heterogeneous diffusion was found to play a dominant role in the adsorption of microplastics by the starch-gelatin sponge. Investigations into the performance of the sponge in complex matrices including tap water, sea water, soil surfactant, and take-out dish soup, further reveal a considerably high removal efficiency (60%∼70%) for the microplastics in the real samples. It is also suggested tiny plastics in different sizes be removable using the sponge with controlled pore size. With combined merits of sustainability, cost-effectiveness, and simple operation without the need for professional background for this approach, industrial and even household removal of tiny plastic contaminants from environmental and food samples are within reach.

Taking control of microplastics data: A comparison of control and blank data correction methods

Although significant headway has been achieved regarding method harmonisation for the analysis of microplastics, analysis and interpretation of control data has largely been overlooked. There is currently no consensus on the best method to utilise data generated from controls, and consequently many methods are arbitrarily employed. This study identified 6 commonly implemented strategies: a) No correction; b) Subtraction; c) Mean Subtraction; d) Spectral Similarity; e) Limits of detection/ limits of quantification (LOD/LOQ) or f) Statistical analysis, of which many variations are possible. Here, the 6 core methods and 45 variant methods (n = 51) thereof were used to correct a dummy dataset using control data. Most of the methods tested were too inflexible to account for the inherent variation present in microplastic data. Only 7 of the 51 methods tested (six LOD/LOQ methods and one statistical method) showed promise, removing between 96.3 % and 100 % of the contamination data from the dummy set. The remaining 44 methods resulted in deficient corrections for background contamination due to the heterogeneity of microplastics. These methods should be avoided in the future to avoid skewed results, especially in low abundance samples. Overall, LOD/LOQ methods or statistical analysis comparing means are recommended for future use in microplastic studies.

Simultaneous Quantification of Opioids in Blood and Urine by Gas Chromatography-Mass Spectrometer with Modified Dispersive Solid-Phase Extraction Technique

Common methodologies such as liquid-liquid extraction and solid-phase extraction are applied for the extraction of opioids from biological specimens i.e., blood and urine. Techniques including LC-MS/LC-MSMS, GC-MS, etc. are used for qualitative or quantitative determination of opioids. The goal of the present work is to design a green, economic, rugged, and simple extraction technique for famous opioids in human blood and urine and their simultaneous quantification by GC-MS equipped with an inert plus electron impact (EI) ionization source at SIM mode to produce reproducible and efficient results. Morphine, codeine, 6-acetylmorphine, nalbuphine, tramadol and dextromethorphan were selected as target opioids. Anhydrous Epsom salt was applied for dSPE of opioids from blood and urine into acetonitrile extraction solvent with the addition of sodium phosphate buffer (pH 6) and n-hexane was added to remove non-polar interfering species from samples. BSTFA was used as a derivatizing agent for GC-MS. Following method validation, the LOD/LLOQ and ULOQ were determined for morphine, codeine, nal-buphine, tramadol, and dextromethorphan at 10 ng/mL and 1500 ng/mL, respectively, while the LOD/LLOQ and ULOQ were determined for 6-acetylmorphine at 5 ng/mL and 150 ng/mL, respectively. This method was applied to real blood and urine samples of opioid abusers and the results were found to be reproducible with true quantification.

Temporal patterns of plastic contamination in surface waters at the SS Yongala shipwreck, Great Barrier Reef, Australia

Plastic pollution is ubiquitous within the marine environment, including surface waters, water column and benthic sediments. Marine plastic contamination is expected to increase if future projections of increased plastic production eventuate. Conversely, national and international efforts are aiming to reduce marine plastic contamination. In this context, scientists, managers and the general public are increasingly interested in understanding the status and temporal trends of plastic contamination in the marine environment. Presented here is the first temporal assessment of plastic contamination in surface waters of the Great Barrier Reef (GBR), Australia. Specifically, duplicate surface seawater samples (n = 66) were collected at the SS Yongala shipwreck (Central GBR) monthly from September 2016 to September 2019 and analysed for plastic presence and abundance. The processing workflow involved density separation, followed by filtration, visual identification and sizing of putative plastics using stereomicroscopy, and chemical characterisation using Fourier transform infrared spectroscopy. A total of 533 plastic items were identified across all tows, consisting of macro-, meso- and microplastic fragments and fibres, with polypropylene and polyethylene being the most common polymers. Plastic contamination was detected in every replicate tow, bar one. Plastic concentrations fluctuated and spiked every three months, although contamination did not significantly alter across the three-year period. Wind speed, salinity and river discharge volume, but not surface current speed nor sea surface temperature, had a significant influence on the levels of plastic contamination. This study reveals, for the first time, the chronic presence of plastic debris in the surface waters of the GBR highlighting the need for long-term and on-going monitoring of the marine environment for plastic contamination.