Microwave-assisted peroxidative oxidation of toluene and 1-phenylethanol with monomeric keto and polymeric enol aroylhydrazone Cu(II) complexes

Toluene Oxidation: CO2 vs Benzaldehyde: Current Status and Future Perspectives

Toluene is a common and significant volatile organic compound (VOC). Although it finds extensive application in various industrial processes (chemical manufacturing, paint and adhesive production, and as a solvent), it creates a huge environmental impact when emitted freely into the atmosphere. Two solutions were found to mitigate the emission of this pollutant: the total oxidation to CO2 and H2O and the selective oxidation into benzaldehyde. This review discusses the two main alternatives for tackling this problem: converting the toluene into carbon dioxide by total oxidation or into benzaldehyde by selective oxidation. It presents new catalytic advances, new trends, and the advantages and disadvantages of both methods.

Chemo- and regioselective benzylic C(sp3)–H oxidation bridging the gap between hetero- and homogeneous copper catalysis

Selective C‒H functionalization in a pool of proximal C‒H bonds, predictably altering their innate reactivity is a daunting challenge. We disclose here, an expedient synthesis of privileged seven-membered lactones, dibenzo[c,e]oxepin-5(7H)-one through a highly chemoselective benzylic C(sp³)‒H activation. Remarkably, the formation of widely explored six-membered lactone via C(sp²)‒H activation is suppressed under the present conditions. The reaction proceeds smoothly on use of inexpensive metallic copper catalyst and di-tert-butyl peroxide (DTBP). Owing to the hazards of stoichiometric DTBP, further, we have developed a sustainable metallic copper/rose bengal dual catalytic system coupled with molecular oxygen replacing DTBP. A 1,5-aryl migration through Smiles rearrangement was realized from the corresponding diaryl ether substrates instead of expected eight-membered lactones. The present methodology is scalable, applied to the total synthesis of cytotoxic and neuroprotective natural product alterlactone. The catalyst is recyclable and the reaction can be performed in a copper bottle without any added catalyst.

•

Catalytic strategy for chemo- and regioselective benzylic C–H activation

•

Bulk copper catalysis merging with photocatalysis

•

Reusable copper catalyst

•

Reaction demonstrated in commercial copper bottle without external catalyst

Oxido- and Dioxido-Vanadium(V) Complexes Supported on Carbon Materials: Reusable Catalysts for the Oxidation of Cyclohexane

Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.

Fe(III) Complexes in Cyclohexane Oxidation: Comparison of Catalytic Activities under Different Energy Stimuli

In this study, the mononuclear Fe(III) complex [Fe(HL)(NO3)(H2O)2]NO3 (1) derived from Nʹ-acetylpyrazine-2-carbohydrazide (H2L) was synthesized and characterized by several physicochemical methods, e.g., elemental analysis, infrared (IR) spectroscopy, electrospray ionization mass spectrometry (ESI-MS), and single crystal X-ray diffraction analysis. The catalytic performances of 1 and the previously reported complexes [Fe(HL)Cl2] (2) and [Fe(HL)Cl(μ-OMe)]2 (3) towards the peroxidative oxidation of cyclohexane under three different energy stimuli (microwave irradiation, ultrasound, and conventional heating) were compared. 1-3 displayed homogeneous catalytic activity, leading to the formation of cyclohexanol and cyclohexanone as final products, with a high selectivity for the alcohol (up to 95%). Complex 1 exhibited the highest catalytic activity, with a total product yield of 38% (cyclohexanol + cyclohexanone) under optimized microwave-assisted conditions.

A New Method for the Measurement of the Diffusion Coefficient of Adsorbed Vapors in Thin Zeolite Films, Based on Magnetoelastic Sensors

In the current work an experimental method is used in order to calculate the diffusivity D (diffusion coefficient) of various vapors in thin zeolite films. The method is based on adsorption data from magnetoelastic sensors on top of which a zeolite layer was synthesized, and the diffusivity is extracted by fitting the data to Fick’s laws of diffusion. In particular, the method is demonstrated for two volatile organic compound (VOC) vapors on two different zeolites, the p-Xylene adsorption in Faujasite type zeolite with D=1.89×10−13 m2/s at 120 °C and the propene adsorption in Linde Type A type zeolite with D=5.9×10−14 m2/s at 80 °C, two diffusion coefficients which are extracted experimentally for first time. Our results are within the order of magnitude of other VOC/zeolite values reported in literature.

Aroylhydrazone Schiff Base Derived Cu(II) and V(V) Complexes: Efficient Catalysts towards Neat Microwave-Assisted Oxidation of Alcohols

A new hexa-nuclear Cu(II) complex [Cu3(μ2-1κNO2,2κNO2-L)(μ-Cl)2(Cl)(MeOH)(DMF)2]2 (1), where H4L = N'1,N'2-bis(2-hydroxybenzylidene)oxalohydrazide, was synthesized and fully characterized by IR spectroscopy, ESI-MS, elemental analysis, and single crystal X-ray diffraction. Complex 1 and the dinuclear oxidovanadium(V) one [{VO(OEt)(EtOH)}2(1κNO2,2κNO2-L)]·2H2O (2) were used as catalyst precursors for the neat oxidation of primary (cinnamyl alcohol) and secondary (1-phenyl ethanol, benzhydrol) benzyl alcohols and of the secondary aliphatic alcohol cyclohexanol, under microwave irradiation using tert-butyl hydroperoxide (TBHP) as oxidant. Oxidations proceed via radical mechanisms. The copper(II) compound 1 exhibited higher catalytic activity than the vanadium(V) complex 2 for all the tested alcohol substrates. The highest conversion was found for 1-phenylethanol, yielding 95.3% of acetophenone in the presence of 1 and in solvent and promoter-free conditions. This new Cu(II) complex was found to exhibit higher activity under milder reaction conditions than the reported aroylhydrazone Cu(II) analogues.

1D Copper(II)-Aroylhydrazone Coordination Polymers: Magnetic Properties and Microwave Assisted Oxidation of a Secondary Alcohol

The 1D Cu(II) coordination polymers [Cu₃(L¹)(NO₃)₄(H₂O)₂]_n (1) and [Cu₂(H₂L²)(NO₃)(H₂O)₂]_n(NO₃)_n (2) have been synthesized using the aroylhyrazone Schiff bases N'¹,N'²-bis(pyridin-2-ylmethylene)oxalohydrazide (H₂L¹) and N'¹,N'³-bis(2-hydroxybenzylidene)malonohydrazide (H₄L²), respectively. They have been characterized by elemental analysis, infrared (IR) spectroscopy, UV-Vis spectroscopy, electrospray ionization mass spectrometry (ESI-MS), single crystal X-ray diffraction and variable temperature magnetic susceptibility measurements (for 2). The ligand (L¹)²⁻ coordinates in the iminol form in 1, whereas the amide coordination is observed for (H₂L²)²⁻ in 2. Either the ligand bridge or the nitrate bridge in 2 mediates weak antiferromagnetic coupling. The catalytic performance of 1 and 2 has been investigated toward the solvent-free microwave-assisted oxidation of a secondary alcohol (1-phenylethanol used as model substrate). At 120°C and in the presence of the nitroxyl radical 2,2,6,6-tetramethylpiperydil-1-oxyl (TEMPO), the complete conversion of 1-phenylethanol into acetophenone occurs with TOFs up to 1,200 h⁻¹.

Recent Advances in Copper Catalyzed Alcohol Oxidation in Homogeneous Medium

The development of sustainable processes and products through innovative catalytic materials and procedures that allow a better use of resources is undoubtedly one of the most significant issues facing researchers nowadays. Environmental and economically advanced catalytic processes for selective oxidation of alcohols are currently focused on designing new catalysts able to activate green oxidants (dioxygen or peroxides) and applying unconventional conditions of sustainable significance, like the use of microwave irradiation as an alternative energy source. This short review aims to provide an overview of the recently (2015–2020) discovered homogeneous aerobic and peroxidative oxidations of primary and secondary alcohols catalyzed by copper complexes, highlighting new catalysts with potential application in sustainable organic synthesis, with significance in academia and industry.

Ferraria A, M. Botelho do Rego A, Correia LMM, Saraiva MS, Pombeiro AJL. Ultrasound and Radiation-Induced Catalytic Oxidation of 1-Phenylethanol to Acetophenone with Iron-Containing Particulate Catalysts

Iron-containing particulate catalysts of 0.1–1 µm size were prepared by wet and ball-milling procedures from common salts and characterized by FTIR, TGA, UV-Vis, PXRD, FEG-SEM, and XPS analyses. It was found that when the wet method was used, semi-spherical magnetic nanoparticles were formed, whereas the mechanochemical method resulted in the formation of nonmagnetic microscale needles and rectangles. Catalytic activity of the prepared materials in the oxidation of 1-phenylethanol to acetophenone was assessed under conventional heating, microwave (MW) irradiation, ultrasound (US), and oscillating magnetic field of high frequency (induction heating). In general, the catalysts obtained by wet methods exhibit lower activities, whereas the materials prepared by ball milling afford better acetophenone yields (up to 83%). A significant increase in yield (up to 4 times) was observed under the induction heating if compared to conventional heating. The study demonstrated that MW, US irradiations, and induction heating may have great potential as alternative ways to activate the catalytic system for alcohol oxidation. The possibility of the synthesized material to be magnetically recoverable has been also verified.

C. Ribeiro A, Kolobova E, M. D. R. S. Martins L, A. C. Carabineiro S, German D, Pichugina D, Jiang C, J. L. Pombeiro A, Bogdanchikova N, Cortés Corberán V, Pestryakov A. Supported Gold Nanoparticles as Catalysts in Peroxidative and Aerobic Oxidation of 1-Phenylethanol under Mild Conditions

The efficiency of Au/TiO₂ based catalysts in 1-phenylethanol oxidation was investigated. The role of support modifiers (La₂O₃ or CeO₂), influence of gold loading (0.5% or 4%) and redox pretreatment atmosphere, catalyst recyclability, effect of oxidant: tert-butyl hydroperoxide (TBHP) or O₂, as well as the optimization of experimental parameters of the reaction conditions in the oxidation of this alcohol were studied and compared with previous studies on 1-octanol oxidation. Samples were characterized by temperature-programmed oxygen desorption (O₂-TPD) method. X-ray photoelectron spectroscopy (XPS) measurements were carried out for used catalysts to find out the reason for deactivation in 1-phenylethanol oxidation. The best catalytic characteristics were shown by catalysts modified with La₂O₃, regardless of the alcohol and the type of oxidant. When O₂ was used, the catalysts with 0.5% Au, after oxidative pretreatment, showed the highest activity in both reactions. The most active catalysts in 1-phenylethanol oxidation with TBHP were those with 4% Au and the H₂ treatment, while under the same reaction conditions, 0.5% Au and O₂ treatment were beneficial in 1-octanol oxidation. Despite the different chemical nature of the substrates, it seems likely that Au⁺(Au^δ+) act as the active sites in both oxidative reactions. Density functional theory (DFT) simulations confirmed that the gold cationic sites play an essential role in 1-phenylethanol adsorption.

Cd(ii) coordination compounds as heterogeneous catalysts for microwave-assisted peroxidative oxidation of toluene and 1-phenylethanol

Cd(ii) compounds as catalysts towards microwave assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of toluene and 1-phenylethanol under heterogeneous conditions are explored.

Cu(II) and Fe(III) Complexes Derived from N-Acetylpyrazine-2-Carbohydrazide as Efficient Catalysts Towards Neat Microwave Assisted Oxidation of Alcohols

The mononuclear Cu(II) complex [Cu((kNN′O-HL)(H2O)2] (1) was synthesized using N-acetylpyrazine-2-carbohydrazide (H2L) and characterized by elemental analysis, IR spectroscopy, ESI-MS and single crystal X-ray crystallography. Two Fe(III) complexes derived from the same ligand viz, mononuclear [Fe((kNN′O-HL)Cl2] (2) and the binuclear [Fe(kNN′O-HL)Cl(μ-OMe)]2 (3) (synthesized as reported earlier), were also used in this study. The catalytic activity of these three complexes (1–3) was examined towards the oxidation of alcohols using tert-butyl hydroperoxide (TBHP) as oxidising agent under solvent-free microwave irradiation conditions. Primary and secondary benzyl alcohols (benzyl alcohol and 1-phenylethanol), and secondary aliphatic alcohols (cyclohexanol) were used as model substrates for this study. A comparison of their catalytic efficiency was performed. Complex 1 exhibited the highest activity in the presence of TEMPO as promoter for the oxidation of 1-phenylethanol with a maximum yield of 91.3% of acetophenone.

Cu(ii) complexes of N-rich aroylhydrazone: magnetism and catalytic activity towards microwave-assisted oxidation of xylenes

The new aroylhydrazone N'-(di(pyridin-2-yl)methylene)pyrazine-2-carbohydrazide (HL) species, rich in N-donor sites, has been used to synthesize Cu(ii) compounds with different nuclearities, viz. the binuclear [Cu₂(μ-1κN³,2κN²O-L)(Cl)₃(MeOH)] (1), the octanuclear [Cu₄(μ-1κN³,2κN²O-L)₂(μ-Cl)₃(Cl)₃]₂ (2) and the 1D coordination polymer [Cu₃(μ₃-1κN³,2κN²O,3κN-L)(μ-NO₃)(NO₃)₃(H₂O)₃]_n·nNO₃ (3). They have been characterized by elemental analysis, FT-IR and single crystal X-ray diffraction. The magnetic properties of 2 and 3 have been explored using variable temperature magnetic measurements. The catalytic performances of the compounds were evaluated towards the peroxidative oxidation of o-, p- and m-xylenes under microwave irradiation, leading to the formation of the corresponding methyl benzyl alcohol, tolualdehyde and toluic acid as the major products. Complex 3 exhibits the best catalytic activity towards the oxidation of p-xylene with a total yield of 37% (4-methylbenzyl alcohol + p-tolualdehyde + p-toluic acid).

Vanadium complexes of different nuclearities in the catalytic oxidation of cyclohexane and cyclohexanol – an experimental and theoretical investigation

Catalytic activities of oxidovanadium(v) complexes towards microwave-assisted peroxidative oxidation of cyclohexane and cyclohexanol are explored by experimental and DFT calculations.

Catalytic Activity of Polynuclear vs. Dinuclear Aroylhydrazone Cu(II) Complexes in Microwave-Assisted Oxidation of Neat Aliphatic and Aromatic Hydrocarbons

One-dimensional (1D) polynuclear Cu(II) complex (1) derived from (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H₂L) is synthesized and characterized by elemental analysis, IR spectroscopy, ESI-MS, and single crystal X-ray crystallography. Its catalytic performance towards the solvent-free microwave-assisted peroxidative oxidation of aliphatic and aromatic hydrocarbons under mild conditions is compared with that of dinuclear Cu(II) complexes (2 and 3) of the same ligand, previously reported as antiproliferative agents. Polymer 1 exhibits the highest activity, either for the oxidation of cyclohexane (leading to overall yields, based on the alkane, of up to 39% of cyclohexanol and cyclohexanone) or towards the oxidation of toluene (selectively affording benzaldehyde up to a 44% yield), after 2 or 2.5 h of irradiation at 80 or 50 °C, respectively.

Peroxidative Oxidation of Alkanes and Alcohols under Mild Conditions by Di- and Tetranuclear Copper (II) Complexes of Bis (2-Hydroxybenzylidene) Isophthalohydrazide

Bis(2-hydroxybenzylidene)isophthalohydrazide (H₄L) has been used to synthesize the dinuclear [Cu₂(1κNO²:2κN′O′²-H₂L)(NO₃)₂(H₂O)₂] (1) and the tetranuclear [Cu₄(μ-1κNO²:2κN′O²-H₂L)₂(μ-NO₃)₂(H₂O)₄]·2C₂H₅OH (2) complexes. The solvent plays an important role in determining the ligand behaviour in the syntheses of the complexes. An ethanol-acetonitrile mixture of solvents favours partials enolization in the case of 2. Both complexes have been characterized by elemental analysis, infrared radiation (IR), single crystal X-ray crystallography and electrochemical methods. The variable temperature magnetic susceptibility measurements of 2 show strong antiferromagnetic coupling between the central nitrato-bridged Cu (II) ions. The catalytic activity of both 1 and 2 has been screened toward the solvent-free microwave-assisted oxidation of alcohols and the peroxidative oxidation of alkanes under mild conditions. Complex 1 exhibits the highest activity for both oxidation reactions, leading selectively to a maximum product yield of 99% (for the 1-phenylethanol oxidation after 1 h without any additive) and 13% (for the cyclohexane oxidation to cyclohexyl hydroperoxide, cyclohexanol and cyclohexanone after 3 h).

Luminescence, electrochemical and photocatalytic properties of sub-micron nickel(II) and cobalt(II) coordination polymers synthesized by sonochemical process

Submicron structures of Ni^II/Co^II-based coordination polymers (CPs) [Ni(L1)(mip)·H₂O]_n (1) and {[Co(L2)(mip)]·0·.5H₂O}_n(2) (L1=1,6-bis(5,6-dimethylbenzimidazole)hexane, L2=1,6-bis(benzimidazole)hexane, H₂mip=5-methylisophthalic acid) were obtained by ultrasonic irradiation and structurally characterized by elemental analysis, powder X-ray diffraction and scanning electron microscopy. Structural analysis show that two CPs feature uninodal 3-connected 2D hcb layer, whilst CP 2 is further extended into a 3D complicated supramolecular network by C14-H14⋯O2 hydrogen bonds. Ultrasonic time and power influencing morphology of sub-micron sized CPs, were also discussed. Besides that, thermal stability, luminescence, electrochemical properties and photocatalytic activity of sub-micron sized 1 and 2 were presented in detail. Moreover, sub-micron sized 1 manifests the higher photocatalytic activity than sub-micron sized 2 for decomposition of methylene blue (MB) under UV irradiation.