Optimisation of microwave assisted extraction (MAE) for polycyclic aromatic hydrocarbon (PAH) determination in smoked meat

Microwave-assisted extraction in closed vessel in food analysis

Microwave-assisted extraction (MAE) is an important technique in analytical chemistry. It offers several advantages over traditional extraction methods, such as improved extraction efficiency, shorter extraction times, reduced solvent consumption, and enhanced analyte recovery. Using microwaves, heat is directly applied to the sample, leading to rapid and efficient extraction of target compounds by enhancing the solubility and diffusion of the target compounds, thus requiring lower solvent volume. Therefore, MAE can be considered a more environmentally friendly and cost-effective option facilitating the transition toward greener and more sustainable analytical chemistry workflows. This contribution systematically reviews the application of MAE to a selection of target compounds/compounds classes of relevance for food quality and safety assessment. As inclusion criteria, MAE active temperature control and molecularly-resolved characterization of the extracts were considered. Contents include a brief introduction of the principles of operation, available systems characteristics, and key parameters influencing extraction efficiency and selectivity. The application section covers functional food components (e.g., phenols, diterpenes, and carotenoids), lipids, contaminants (e.g., polycyclic aromatic hydrocarbons and mineral oil hydrocarbons), pesticides, veterinary drug residues, and a selection of process contaminants and xenobiotics of relevance for food safety.

Polycyclic aromatic hydrocarbons in aquatic animals: a systematic review on analytical advances and challenges

Polycyclic aromatic hydrocarbons (PAHs), the main component of petroleum, are a concern due to their environmental persistence, long-range transport, and potential toxic effects on animal, human health, and the environment. PAHs are considered persistent compounds and can be bioaccumulated in sediments and aquatic biota. Determining PAHs in animals and environmental samples consists of three steps: extraction, clean-up or purification, and analytical determination. The matrix complexity and the diversity of environmental contaminants, such as PAHs resulted in the development of numerous analytical techniques and protocols for the extraction of these components and analysis in several samples. This systematic review article seeks to relate the extraction and preparation methods of complex samples from aquatic animals and the two main detection techniques of PAHs. For the elaboration of the research, 67 articles published between 2011 and 2021 were sought, which specifically contemplated the isolation of aquatic extracts and detection and quantification techniques of PAHs.

The Content of Polycyclic Aromatic Hydrocarbons in Slavonska slanina—Traditionally Smoked and Dry-Cured Bacon

The goal of this study was to determine the concentrations of 16 PAHs (PAH16) naphthalene—Nap, acenaphthylene—Anl, acenaphthene—Ane, fluorene—Flu, phenanthrene—Phen, anthracene—Ant, fluoranthene—Flt, pyrene—Pyr, benz[a]anthracene—BaA, chrysene—Chry, benzo[b]fluoranthene—BbF, benzo[k]fluoranthene—BkF, benzo[a]pyrene—BaP, indeno[1,2,3-cd]pyrene—InP, dibenz[a,h]anthracene—DahA and benzo[g,h,i]perylene—BghiP) in Slavonska slanina traditionally smoked bacon over open fire and industrially smoked on a smoke generator with a heated plate. In the samples of Slavoska slanina smoked in a traditional manner, the presence of 11 out of 16 analyzed PAHs was determined (Nap, Anl, Ane, Fln, Ant, Phen, Flt, BaA, Pyr, BbF, BkF). In the samples smoked in industrial conditions, only 2 out of 16 (Nap, Anl) were quantified. In the samples smoked with open fire (the traditional method), PAH4 (BaA, BaP BbF, Chry) concentations were as follows: 14.84 μg kg−1 in the middle, 10.60 μg kg−1 on the surface and 17.37 μg kg−1 in the skin, while the PAH4 content in the samples smoked in industrial conditions were below the level of quantification (<LOQ). The content of carcinogenic BaP was below the limit of quantification in all investigated samples. These findings support the fact that traditional smoking may result in a product safe for consumption, as far as the prescribed legislative recommendations are concerned, but constant monitoring is still needed.

Bioaccessibility of Polycyclic Aromatic Hydrocarbons (PAHs) in Grilled Meat: The Effects of Meat Doneness and Fat Content

Exposure to polycyclic aromatic hydrocarbons (PAHs) through diet is gaining concern due to the risk it poses to human health. This study evaluated the bioaccessibility of PAHs contained in charcoal-grilled beef and chicken in different segments of the gastrointestinal tract (GIT) with regard to the degree of doneness and fat content of the meats. The levels of 15 PAHs in the grilled meat samples and bioaccessible fractions were determined using high-performance liquid chromatography (HPLC) equipped with PAH column, and UV and fluorescence detectors. Total PAHs were found in beef (30.73 ng/g) and chicken (70.93 ng/g) before its digestion, and different PAHs’ bioaccessibility were observed in the different segments of GIT, with the highest in the stomach followed by the small intestine, despite the relatively higher bioaccessibility of individual PAHs in grilled beef as compared to those in grilled chicken. Additionally, the PAHs’ bioaccessibility increased with the increase in the degree of doneness. Positive linear correlation was observed for the PAHs’ bioaccessibility and the fat contents of grilled meat. Overall, this study highlights the influence of meat doneness (cooking time) and fat contents on the bioaccessibility and bioaccumulation of PAHs.

Response Surface Methodology of Quantitative of Heterocyclic Aromatic Amines in Fried Fish Using Efficient Microextraction Method Coupled with High-Performance Liquid Chromatography: Central Composite Design

Meat and meat products are indispensable part of our diet. Heat processing of these tasty foods such as fried fish causes to form heterocyclic aromatic amines (HAAs). The sources of heating have directly affected on the level and type of HAAs. In this research, 2-amino-1-methyl-6-phenylimidazo [4'5-b] pyridine (PhIP), 2-amino-3-methylimidazo [4,5-f]quinolone (IQ), 2-amino-3,4-dimethylimidazo [4,5-f] quinoline (MeIQ) and 2-amino-3,4-dimethylimidazo [4,5-f] quinoxaline (MeIQx) were determined using an efficient analytical methodology coupled with high-performance liquid chromatography. The effective parameters were optimized by central composite design. The results of this survey demonstrated that rang of relative standard deviation were between 4.5 and 8.2, extraction recoveries were obtained 86-97% and limits of detection were between 0.40 and 0.63 for 4 HAAs. The amounts of HAAs found in 20 different fried fish samples were between 0 and 4.8 ng g-1. PhIP with 1.57 ng g-1 and MeIQ with 2.08 ng g-1 have the lowest and highest average level of HAAs, respectively.

Determination of 15 + 1 European Priority Polycyclic Aromatic Hydrocarbons in Smoked Meat Products by Saponification/Solid-Phase Extraction and Gas Chromatography-Mass Spectrometry

A method for the determination of 15 + 1 European priority polycyclic aromatic hydrocarbons (EUPAHs) in smoked meat samples by saponification/solid-phase extraction and gas chromatography-mass spectrometry has been developed. Both saponification and solid-phase extraction conditions were optimized, which lead to shorter sample preparation time and excellent sensitivity and selectivity. The optimal saponification condition for the lipid extract of 5.00 g smoked food sample was 5 mL KOH (1.5 mol/L)-ethanol at 70°C for 5 min, and the shorter alkaline treatment time avoided the loss of volatile EUPAHs such as Benzo[c]fluorene. All the EUPAHs showed good linearity in the range between 5.0 and 50.0 ng/mL with correlation coefficients between 0.997 and 1.00. The estimated LODs for the EUPAHs were 0.15-0.30 μg/kg, while the LOQs were 0.50-1.0 μg/kg. The three spiking levels of EUPAHs were 1.0, 2.0 and 5.0 μg/kg, and the average recovery was between 75.2 and 99.6%, while the RSD were 2.3-12.4%. This sensitive and rapid method was successfully applied to smoked meat samples from Zhejiang Province of China, and the results revealed the presence of 13 EUPAHs. Benzo[a]pyrene (BaP) was found in 19 out of 20 samples, with concentration ranging from 0.51 to 4.57 μg/kg. The sum of concentrations of PAH4 (summation of benzo(a)pyrene, chrysene, benzo(a)anthracene, and benzo(b)fluoranthene) were 2.40-53.56 μg/kg.

Polycyclic Aromatic Hydrocarbons in Foods: Biological Effects, Legislation, Occurrence, Analytical Methods, and Strategies to Reduce Their Formation

Polycyclic aromatic hydrocarbons (PAHs) are chemical compounds comprised of carbon and hydrogen molecules in a cyclic arrangement. PAHs are associated with risks to human health, especially carcinogenesis. One form of exposure to these compounds is through ingestion of contaminated food, which can occur during preparation and processing involving high temperatures (e.g., grilling, smoking, toasting, roasting, and frying) as well as through PAHs present in the soil, air, and water (i.e., environmental pollution). Differently from changes caused by microbiological characteristics and lipid oxidation, consumers cannot sensorially perceive PAH contamination in food products, thereby hindering their ability to reject these foods. Herein, the occurrence and biological effects of PAHs were comprehensively explored, as well as analytical methods to monitor their levels, legislations, and strategies to reduce their generation in food products. This review updates the current knowledge and addresses recent regulation changes concerning the widespread PAHs contamination in several types of food, often surpassing the concentration limits deemed acceptable by current legislations. Therefore, effective measures involving different food processing strategies are needed to prevent and reduce PAHs contamination, thereby decreasing human exposure and detrimental health effects. Furthermore, gaps in literature have been addressed to provide a basis for future studies.

Barbecued desi chicken: an investigation on the impact of polluted milieu upon formation and ingestion of polycyclic aromatic hydrocarbons (PAHs) in commercial versus laboratory barbecued organs along with stochastic cancer risk assessments in people from an industrial district of Punjab, Pakistan

8∑PAHs in 2- and 4-month-old desi chicken organs collected from Faisalabad district, Punjab, Pakistan, were examined via high-performance liquid chromatography (HPLC). Exposure doses (A_VDD) of PAHs with consequential lifetime excess cancer risks (L_tECR) were also estimated in people ingesting laboratory barbecued (L_b) and commercially barbecued (C_b) desi meat organs. The results exposed the presence of 8ΣPAH in 2- and 4-month-old L_b and C_b chicken organs: drumsticks (D_s), breast (B_S), and wings (W_s) (0.45, 3.10, 0.97 ng g^-1; 2.52, 4.31, 1.22 ng g^-1; and 10.09, 15.04, and 9.06 ng g^-1 respectively). BαP was found only in C_b organs with the highest concentrations (5.08 ng g^-1) in B_s. It was above the EU's tolerable limit, while it was not detected in all L_b organs. The lowest level of 8ΣPAH was found in 2-month-old desi W_s. A comparative percentage increase in 8ΣPAH levels between all L_b and C_b organs was found in the range of 1500-2416.67%. L_tECR for males and adults were ranging from 1.35 × E^-13 to 4.49 × E^-5 at different consumption rates with A_VDD ranging from 1.08 E^-6 to 6.01 E^-5. In contrast to 2- and 4- month-old chicken meat, 2-month-old desi meat is better having less PAH load. Comparing different organs, W_s of former one displayed abridged PAH levels. In conclusion, L_b desi meat is less carcinogenic relative to C_b. More PAH levels are due to secondary smoke in C_b samples collected from the metropolitan. Ingestion of L_b 2-month-old desi chicken organs could be safe to dine as compared with 4-month-old desi and C_b organs. Graphical abstract.

Influence of Different Smoking Procedures on Polycyclic Aromatic Hydrocarbons Formation in Traditional Dry Sausage Hercegovačka kobasica

The concentrations of 16 polycyclic aromatic hydrocarbons (PAH) in smoked dry sausage Hercegovačka kobasica were investigated. The sausages were stuffed in two different casings (collagen and natural) and smoked in traditional and industrial smokehouses. The highest concentration of PAH 16 were detected in sausages in natural casings smoked in the traditional manner. The samples smoked in the industrial chamber stuffed in collagen casing showed the lowest PAH 16 content. The content of PAH 4 in sausage smoked in the traditional way and stuffed in natural casing averaged 24.46 µg/kg, which is more the double of maximum prescribed concentration of 12 µg/kg. The concentration of cancerogenic benzo[a]pyrene averaged 7.79 µg/kg in sausage stuffed in natural casing and smoked in the traditional way, which is almost four times the legislative prescribed values (2 µg/kg). Sausage smoked in the traditional manner and stuffed in collagen casing showed lower values for PAH 4 (13.88 µg/kg) and benzo[a]pyrene (4.97 µg/kg), but these values were also above the legislative prescribed values.

Polycyclic aromatic hydrocarbons in traditionally smoked Slavonska kobasica

The traditional smoking procedure, which is the use of open fire, can lead to the formation of PAHs in sausages. The aim of this paper was to assess the types and concentrations of 16 PAHs in 30 samples of Slavonska kobasica, a traditional smoked sausage. In general, some samples showed high values of anthracene and acenaphthylene. In one sample, acenaphthylene reached the value of 1050 µg/kg and in another 1491 µg/kg anthracene was measured. Cancerogenic benzo(a)pyrene content was little above the maximum limit of 5 µg/kg in four samples, but mainly remained below the limit of quantification. PAH4 (i.c. benzo(a)anthracene, chrysene, benzo(b)fluoranthene and benzo(a)pyrene) were above the maximum limit of 30 µg/kg in three samples. Generally, it can be noted from the results that samples with high PAH4 and benzo(a)pyrene concentrations also have high PAH16 concentrations.

Distribution of Polycyclic Aromatic Hydrocarbons in Traditional Dry Cured Smoked Ham Slavonska Šunka

Slavonska šunka is a traditional dry-cured smoked ham. Smoking with open fire commonly results in the accumulation of polycyclic aromatic hydrocarbons (PAH) molecules in tissues. The objective of this research was to assess the types and concentrations of 16 PAHs in 30 samples of traditional dry-cured smoked ham Slavonska šunka. In general, all samples had high values of anthracene while higher levels of acenaphthylene were present in some samples. In sample SS1, the maximal value for anthracene reached 228.03 µg/kg, while sample SS28 had the lowest value of this PAH—33.38 µg/kg. SS1 had increased values for several other PAHs: benzo[a]anthracene (54.03 µg/kg), acenaphtene (19.90 µg/kg) and phenanthrene (27.11 µg/kg). Cancerogenic benzo[a]pyrene content was below the limit of quantification for all samples. PAH4 (benzo[a]anthracene, chrysene, benzo[b]fluoranthene and benzo[a]pyrene) concentrations were above legislative recommendation (>30 µg/kg) in seven samples. All the samples of Slavonska šunka had significant PAH16 concentrations, with the lowest value of 61.30 µg/kg (SS28) and the highest 462.83 µg/kg (SS1). The highest concentrations of PAHs were determined in the Vukovar–Srijem county samples. Another conclusion from this research is that samples smoked with elm tree showed high PAH concentrations in comparison to the ones smoked with beech and hornbeam.

Microwave-Based Technique for Fast and Reliable Extraction of Organic Contaminants from Food, with a Special Focus on Hydrocarbon Contaminants

Due to food complexity and the low amount at which contaminants are usually present in food, their analytical determination can be particularly challenging. Conventional sample preparation methods making use of large solvent volumes and involving intensive sample manipulation can lead to sample contamination or losses of analytes. To overcome the disadvantages of conventional sample preparation, many researchers put their efforts toward the development of rapid and environmental-friendly methods, minimizing solvent consumption. In this context, microwave-assisted-extraction (MAE) has obtained, over the last years, increasing attention from analytical chemists and it has been successfully utilized for the extraction of various contaminants from different foods. In the first part of this review, an updated overview of the microwave-based extraction technique used for rapid and efficient extraction of organic contaminants from food is given. The principle of the technique, a description of available instrumentation, optimization of parameters affecting the extraction yield, as well as integrated techniques for further purification/enrichment prior to the analytical determination, are illustrated. In the second part of the review, the latest applications concerning the use of microwave energy for the determination of hydrocarbon contaminants-namely polycyclic aromatic hydrocarbons (PAHs) and mineral oil hydrocarbons (MOH)-are reported and critically overviewed and future trends are delineated.

Using Box-Behnken design approach to investigate benzo[a]anthracene formation in smoked cattle meat samples and its' risk assessment

In present study, a novel approach was selected for benzo[a]anthracene determination from smoked cattle meat samples using solid phase extraction under various experimental conditions. To optimize experimental variables, a three factor, three-level Box-Behnken experimental design combining with response surface methodology and quadratic programming were employed to prevent excessive amount of benzo[a]anthracene formation in smoked meat based on different experimental parameters. The influence of some important process parameters including cooking time (10-30 min), fat ratio (5-25%) and distance to the cooking source (5-25 cm), which significantly affected the formation efficiency of benzo[a]anthracene were optimized. The analysis of variance was conducted for specifying the interactions of independent variables. The independent and the dependent variables interactions were investigated. The quadratic regression model and the response surface contour plots were used to determine optimum values for the selected variables. The results of study revealed that optimum cooking time of smoked cattle meat was determined as 24.9 min, fat ratio 7.9% and the distance to the cooking source 21.8 cm. Under optimum conditions, minimum benzo[a]anthracene was formed in meat and its amount was determined using high performance liquid chromatography-mass spectrophotometer as qualitative and quantitative. The limit of detection and limit of quantitation values were calculated as 0.4 µg kg^-1 and 1.1 µg kg^-1, respectively.

Comparison of extraction techniques for polycyclic aromatic hydrocarbons from lichen biomonitors

Lichens are useful biomonitors for atmospheric polycyclic aromatic hydrocarbons (PAHs). Different sample preparation techniques were explored in this regard, including ultrasound-assisted solvent extraction, microwave-assisted extraction, Soxhlet, and the quick, easy, cheap, effective, rugged, and safe (QuEChERS) technique. It was found that a QuEChERS technique using hexane:acetone (1:1, v/v), never reported before for application to lichens, provided the best recoveries of internal standards, the highest total peak area for all PAHs of interest, and %RSDs comparable with the other preparation techniques tested. The optimized sample preparation technique was found to be a comparatively fast method (45 min), with good recoveries (96%), using less solvents and minimal energy consumption. Strong matrix effects were found: both strong enhancement (for the lighter PAHs) and strong suppression (for the heavier PAHs). The use of matrix-matched standards is thus imperative for the accurate determination of PAH concentrations in the lichen samples. Graphical abstract "Note: This data is mandatory. Please provide."

Domestic Cooking of Muscle Foods: Impact on Composition of Nutrients and Contaminants

Meat and fish are muscle foods rich in valuable nutrients, such as high-quality proteins, vitamins, and minerals, and, in the case of fish, also unsaturated fatty acids. The escalation of meat and fish production has increased the occurrence of pesticide and antibiotic residues, as result of pest control on feed crops, and antibiotics used to fight infections in animals. Meat and fish are usually cooked to enrich taste, soften texture, increase safety, and improve nutrient digestibility. However, the impact of cooking on nutritional properties and formation of deleterious compounds must be understood. This review summarizes studies, published in the last decade, that have focused on how domestic cooking affects: (i) composition of nutrients (protein, fatty acids, vitamins, and minerals); (ii) antibiotic and pesticide residue contents; and (iii) the formation of cooking-induced contaminants (heterocyclic aromatic amines, polycyclic aromatic hydrocarbons, and thermal degradation products of antibiotics and pesticides). Cooking affects the nutritional composition of meat and fish; frying is the cooking method that causes the greatest impact. Cooking may reduce the pesticide and antibiotic residues present in contaminated raw meat and fish; however, it may result in the formation of degradation products of unknown identity and toxicity. Control of cooking time and temperature, use of antioxidant-rich marinades, and avoiding the dripping of fat during charcoal grilling can reduce the formation of cooking-induced contaminants.

Dietary risk evaluation for 28 polycyclic aromatic hydrocarbons (PAHs) in tea preparations made of teas available on the Polish retail market

The aim of this work was to assess dietary risk resulting from consumption of polycyclic aromatic hydrocarbons (PAHs) with tea infusions. To this end, levels of 28 PAHs in black, green, red and white teas available on the Polish retail market have been assessed. Profiles and correlation between concentrations of individual PAHs have been identified. A model study on transfer of PAHs from tea leaves into tea preparations has been conducted. Relatively high concentrations of 28 evaluated PAHs have been found in 58 tested samples of black, green, red and white teas sampled on the Polish retail market. Total concentration ∑28PAH ranged from 57 to 696 µg kg^-1 with mean 258 µg kg^-1 (dry tea leaves). The most mature tea leaves fermented to a small degree contained relatively the highest PAH levels among all four tested tea types. Relatively low PAH transfer rates into tea infusions and limited volumes of the consumed tea keep the risks associated with PAH dietary intake at a safely low level. The worst-case scenario dietary intake values were 7.62/0.82/0.097 ng kg^-1 b.w. day^-1 (estimated on the basis of the maximum found concentrations 696/113/23 µg kg^-1 and maximum observed transfer rates 24/16/9%) for ∑28PAH/∑PAH4/B[a]P, respectively. MOE values calculated using the above worst case estimates exceeded 700,000 and 400,000 (BMDL₁₀ 0.07 and 0.34 mg kg^-1 b.w. day^-1) for B[a]P and PAH4, respectively. Both B[a]P and PAH4 concentrations may be used as indicators of total PAH concentration in tea leaves; PAH4 slightly better fits low molecular weight PAHs. Several correlations between various PAHs/groups of PAHs have been identified, the strongest one (R² = 0.92) between PAH4 and EU PAH 15+1.

A fit-for-purpose method to monitor 16 European Union PAHs in food: results of five years of official food control in two Italian regions

A gas-chromatographic single-quadrupole analytical method for the analysis of the 16 priority European Union (EU) polycyclic aromatic hydrocarbons (PAHs) in food is presented. The method fulfils the request of Regulation EU 836/2011 for an analytical procedure to be used for official control of PAHs in food in EU member states. The sample preparation involves a pressurised liquid extraction (PLE) with an in-cell clean-up step followed by a lipid removal using solid-phase extraction (SPE) on a styrene divinylbenzene stationary phase (SDVB) and a final gel-permeation chromatography (GPC) step. To reach a better sensitivity for all the analytes, including the heaviest last eluting PAHs, 3 μl of the purified extract were injected in solvent vent mode using a programmable temperature vaporization (PTV) injector. The isobaric PAH isomers were successfully separated using an Agilent Technologies DB-17MS (20 m × 0.18 mm × 0.18 μm) column. The method was fully validated using an in-house approach and the sensitivity, accuracy and precision obtained were satisfactory. The method expanded uncertainty was estimated and it was verified that it was below the maximum standard measurement uncertainty. Moreover, the results of 347 samples of meat and meat products, fish and fish products and mussels collected from January 2012 to December 2016 in the Marche and Umbria regions of Italy are reported. None of the samples exceed the maximum levels fixed by EU Regulation 835/2011, and clams turned out to be the most contaminated among the food matrices analysed. Finally, an estimate of the sum of four marker PAHs (benzo[a]anthracene, benzo[b]fluoranthene, benzo[a]pyrene, chrysene) as indicator of the PAHs contamination was done by comparison with the 16 carcinogenic PAHs sum.

The Occurrence of 16 EPA PAHs in Food - A Review

Occurrence and toxicity of polycyclic aromatic hydrocarbons (PAHs) have been extensively studied in countries all over the world. PAHs generally occur in complex mixtures which may consist of hundreds of compounds. The U.S. Environmental Protection Agency (EPA) proposed in the 1970 to monitor a set of 16 PAHs which are frequently found in environmental samples. This article reviews the suitability of the 16 EPA PAHs for the assessment of potential health threats to humans stemming from the exposure to PAHs by food ingestion. It presents details on analysis methods, the occurrence of PAHs in food, regulatory aspects, and related risk management approaches. In addition, consideration is given to newer evaluations of the toxicity of PAHs and the requirements for risk assessment and management stemming from them.