Preparation and anti-protein fouling property of δ-gluconolactone-modified hydrophilic polysulfone membranes

External surface hydrophilic 3D-POSS-COF@GDL for the direct adsorption of bisphenols in milk samples

In case of organic frameworks (COFs) as adsorbents in the pretreatment of complex food matrices, challenges such as poor dispersion and non-specific adsorption of interfering macromolecules like proteins are often encountered. To address this issue, this work prepared a three-dimensional covalent organic framework (3D-COF) with a novel bcu topology based on polyhedral oligomeric silsesquioxane (POSS). Subsequently, gluconolactone (GDL) was modified onto the external surface of the material via the reaction with the exposed reactive residues. The resulting POSS-COF@GDL adsorbent has an enhanced hydrophilicity in the external surface, thereby significantly improves the dispersion of materials in aqueous solution and reduces the adsorption ability toward protein. Whereas, the inner of material retains hydrophobic pores that exhibit high adsorption efficiency to small hydrophobic molecules. Compared with the traditional pretreatment methods, POSS-COF@GDL can directly extract bisphenols (BPs) in milk samples without any additional treatment. The established sample pretreatment method is coupled with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), resulting in recoveries of 71.8 to 93.6%, intra- and inter-day relative standard deviations (RSDs) of <8.3%, and limits of detection (LODs) of 0.042-0.16 ng∙mL-1 for four BPs.

Bioactivation of Konjac Glucomannan Films by Tannic Acid and Gluconolactone Addition

Wound healing is a dynamic process that requires an optimal extracellular environment, as well as an accurate synchronization between various cell types. Over the past few years, great efforts have been devoted to developing novel approaches for treating and managing burn injuries, sepsis, and chronic or accidental skin injuries. Multifunctional smart-polymer-based dressings represent a promising approach to support natural healing and address several problems plaguing partially healed injuries, including severe inflammation, scarring, and wound infection. Naturally derived compounds offer unique advantages such as minimal toxicity, cost-effectiveness, and outstanding biocompatibility along with potential anti-inflammatory and antimicrobial activity. Herein, the main driving idea of the work was the design and development of konjac glucomannan d-glucono-1,5-lactone (KG) films bioactivated by tannic acid and d-glucono-1,5-lactone (GL) addition. Our analysis, using attenuated total reflectance-Fourier transform infrared, atomic force microscopy, and surface energy measurements demonstrated that tannic acid (TA) clearly interacted with the KG matrix, acting as its cross-linker, whereas GL was embedded within the polymer structure. All developed films maintained a moist environment, which represents a pivotal property for wound dressing. Hemocompatibility experiments showed that all tested films exhibited no hemolytic impact on human erythrocytes. Moreover, the presence of TA and GL enhanced the metabolic and energetic activity in human dermal fibroblasts, as indicated by the MTT assay, showing results exceeding 150%. Finally, all films demonstrated high antibacterial properties as they significantly reduced the multiplication rate of both Staphylococcus aureus and Escherichia coli in bacterial broth and created the inhibition zones for S. aureus in agar plates. These remarkable outcomes make the KG/TA/GL film promising candidates for wound healing applications.

Preparation of restricted-access boronate affinity adsorbent with excellent anti-protein adsorption property for directly extracting small cis-diol molecules from biological matrices

Boronate affinity adsorbents are of great promise in the enrichment of small cis-diol-containing molecules (cis-diols) from biological matrices. This work develops a restricted-access boronate affinity mesoporous adsorbent, in which boronate sites are only distributed on the internal surface of mesopores and the external surface is a strongly hydrophilic layer. The adsorbent has high binding capacities (30.3 mg g-1, 22.9 mg g-1 and 14.9 mg g-1 for dopamine, catechol and adenosine, respectively) in spite of removal of the boronate sites on the external surface of adsorbent. The adsorption specific of adsorbent towards cis-diols was assessed by dispersive solid-phase extraction (d-SPE) method, and the results show that the adsorbent can selectively extract small cis-diols in the biosamples while exclude proteins completely. Under the optimal d-SPE, the nucleosides and cis-diol drugs in human serum were successfully analyzed by coupling d-SPE with high-performance liquid chromatography. Where, the detection limits are between 6.1 and 13.4 ng mL-1 for four nucleosides, and 24.9 and 34.3 ng mL-1 for two cis-diol drugs; the relative recoveries of all the analytes vary from 84.1% to 110.1% (RSDs <13.4%, n = 6). The results indicate that the adsorbent can directly treat the real biosamples without the necessary protein precipitation steps in advance, thus simplifying the analysis process.

A novel Polysulfone/Iron-Nickel oxide nanocomposite membrane for removal of heavy metal and protein from water

Making a nanocomposite membrane is an effective way of producing membranes with desired functionality, better permeance. In this work, virgin polysulfone ultrafiltration (UF) membrane and nanocomposite membranes with different concentrations ranging from 100 to 2,000 mg/L iron-nickel oxide in polysulfone matrix were prepared by phase inversion method. The performances of prepared membranes were evaluated by pure water permeance testing, protein rejection, and lead rejection. Up to 99.66% removal of lead was achieved by nanocomposite membrane. The structure and property of membranes were analyzed by scanning electron microscopy (SEM), powder X-ray diffractometer (XRD), and atomic force microscopy (AFM) and zeta potential analysis. The nanocomposite membranes showed higher water permeance as compared to virgin ultrafiltration membrane. The membrane with 750 mg/L concentration of iron-nickel oxide nanoparticle demonstrated the increase in water flux by 117.85% as compared to the virgin ultrafiltration membrane. Higher albumin rejection and lead rejection were achieved by nanocomposite membrane as compared to polysulfone membrane. Leaching study of nanomaterial in water was undertaken, and it was found the leaching of nanomaterial was minimal. Increase in surface roughness, increase in number of pores with decrease in pore size, led to improvement in ultrafiltration performance by increased selectivity and permeance of the membrane. © 2020 Water Environment Federation PRACTITIONER POINTS: The nanocomposite ultrafiltration membrane with iron-nickel oxide nanomaterial. Upto 117.85% increase in pure water permeance as compared to virgin membrane. Upto 99.66% lead rejection and upto 96.8% albumin rejection from aqueous solution. Little or no leaching of nanomaterials in water. Increased selectivity and productivity of membrane.

Antifouling Ultrafiltration Membranes with Retained Pore Size by Controlled Deposition of Zwitterionic Polymers and Poly(ethylene glycol)

We demonstrate antifouling ultrafiltration membranes with retained selectivity and pure water flux through the controlled deposition of zwitterionic polymers and poly(ethylene glycol) (PEG). Molecules for polymerization were immobilized on the membrane's surface yet prevented from attaching to the membrane's pores due to a backflow of nitrogen (N2) gas achieved using an in-house constructed apparatus that we named the polymer prevention apparatus, or "PolyPrev". First, the operating parameters of the PolyPrev were optimized by investigating the polymerization of dopamine, which was selected due to its versatility in enabling further chemical reactions, published metrics for comparison, and its oxidative self-polymerization. Membrane characterization revealed that the polydopamine-modified membranes exhibited enhanced hydrophilicity; moreover, their size selectivity and pure water flux were statistically the same as those of the unmodified membranes. Because it is well documented that polydopamine coatings do not provide a long-lasting antifouling activity, poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC, Mn = 30 kDa) and succinimidyl-carboxymethyl-ester-terminated PEG ( Mn = 40 kDa) were codeposited while dopamine was polymerizing to generate antifouling membranes. Statistically, the molecular-weight cutoff of the polyMPC- and PEG-functionalized membranes synthesized in the PolyPrev was equivalent to that of the unmodified membranes, and the pure water flux of the PEG membranes was equivalent to that of the unmodified membranes. Notably, membranes prepared in the PolyPrev with polyMPC and PEG decreased bovine serum albumin fouling and Escherichia coli attachment. This study demonstrates that by restricting antifouling chemistries from attaching within the pores of membranes, we can generate high-performance, antifouling membranes appropriate for a wide range of water treatment applications without compromising intrinsic transport properties.

Preparation of restricted-access material precolumns by grafting δ-gluconolactone onto a hybrid silica monolithic column for on-line solid-phase extraction of tetracycline residues from milk

A restricted-access material-hybrid monolithic column was prepared based on single-component organosiloxane and dynamic grafting of δ-gluconolactone for on-line solid phase extraction of tetracycline antibiotic residues from milk. The hybrid monolithic column was prepared in a stainless-steel chromatographic column using methyltrimethoxysilane as the single precursor. δ-Gluconolactone was covalently coupled to aminopropyl derivatized hybrid monolithic column, which formed hydrophilic structures on the surface of the pore of the restricted-access material-hybrid monolithic column. The columns were characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, nitrogen adsorption, contact angle analysis, dynamic adsorption, and chromatographic performance evaluation. The restricted-access material-hybrid monolithic column was applied to the on-line extraction of tetracycline residues from milk. An enrichment factor of 15.8 and a good sample clean-up effect were obtained under the optimized conditions. The recoveries of the three spiked milk samples were between 81.7 and 102.5% with relative standard deviations (n = 3) in the range of 2-5%. The limits of detection (S/N = 3) for target compounds were in the range of 3.80-9.03 μg/kg. The results show that the on-line extraction using the restricted-access material-hybrid monolithic column was powerful for food sample pretreatment with high selectivity and good clean-up effect.

Hemocompatibility and oxygenation performance of polysulfone membranes grafted with polyethylene glycol and heparin by plasma-induced surface modification

Polyethylene glycol (PEG) and heparin (Hep) were grafted onto polysulfone (PSF) membrane by plasma-induced surface modification to prepare PSF-PEG-Hep membranes used for artificial lung. The effects of plasma treatment parameters, including power, gas type, gas flow rate, and treatment time, were investigated, and different PEG chains were bonded covalently onto the surface in the postplasma grafting process. Membrane surfaces were characterized by water contact angle, PEG grafting degree, attenuated total reflectance-Fourier transform infrared spectroscopy, ultraviolet-visible spectrophotometry, X-ray photoelectron spectroscopy, critical water permeability pressure, and scanning electron microscopy. Protein adsorption, platelet adhesion, and coagulation tests showed significant improvement in the hemocompatibility of PSF-PEG-Hep membranes compared to pristine PSF membrane. Gas exchange tests through PSF-PEG6000-Hep membrane showed that when the flow rate of porcine blood reached 5.0 L/min, the permeation fluxes of O₂ and CO₂ reached 192.6 and 166.9 mL/min, respectively, which were close to the gas exchange capacity of a commercial membrane oxygenator. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1737-1746, 2017.

Green materials science and engineering reduces biofouling: approaches for medical and membrane-based technologies

Numerous engineered and natural environments suffer deleterious effects from biofouling and/or biofilm formation. For instance, bacterial contamination on biomedical devices pose serious health concerns. In membrane-based technologies, such as desalination and wastewater reuse, biofouling decreases membrane lifetime, and increases the energy required to produce clean water. Traditionally, approaches have combatted bacteria using bactericidal agents. However, due to globalization, a decline in antibiotic discovery, and the widespread resistance of microbes to many commercial antibiotics and metallic nanoparticles, new materials, and approaches to reduce biofilm formation are needed. In this mini-review, we cover the recent strategies that have been explored to combat microbial contamination without exerting evolutionary pressure on microorganisms. Renewable feedstocks, relying on structure-property relationships, bioinspired/nature-derived compounds, and green processing methods are discussed. Greener strategies that mitigate biofouling hold great potential to positively impact human health and safety.

Preparation of a novel anti-fouling β-cyclodextrin–PVDF membrane

A novel β-cyclodextrin (β-CD)–PVDF membrane was preparedviaan interfacial reaction, using Trimesoyl Chloride (TMC) and β-CD as cross-linking and modification agents, respectively. The membranes were modified by a simple dip-coating method.