Formation–structure–performance correlation of thin film composite membranes prepared by interfacial polymerization for gas separation

Nonaqueous Interfacial Polymerization-Derived Polyphosphazene Films for Sieving or Blocking Hydrogen Gas

A series of cyclomatrix polyphosphazene films have been prepared by nonaqueous interfacial polymerization (IP) of small aromatic hydroxyl compounds in a potassium hydroxide dimethylsulfoxide solution and hexachlorocyclotriphosphazene in cyclohexane on top of ceramic supports. Via the amount of dissolved potassium hydroxide, the extent of deprotonation of the aromatic hydroxyl compounds can be changed, in turn affecting the molecular structure and permselective properties of the thin polymer networks ranging from hydrogen/oxygen barriers to membranes with persisting hydrogen permselectivities at high temperatures. Barrier films are obtained with a high potassium hydroxide concentration, revealing permeabilities as low as 9.4 × 10^-17 cm³ cm cm^-2 s^-1 Pa^-1 for hydrogen and 1.1 × 10^-16 cm³ cm cm^-2 s^-1 Pa^-1 for oxygen. For films obtained with a lower concentration of potassium hydroxide, single gas permeation experiments reveal a molecular sieving behavior, with a hydrogen permeance of around 10^-8 mol m^-2 s^-1 Pa^-1 and permselectivities of H₂/N₂ (52.8), H₂/CH₄ (100), and H₂/CO₂ (10.1) at 200 °C.

Polyarylates containing phthalazinone moieties with excellent thermal resistance

Polyarylates containing phthalazinone moieties are synthesized by interfacial polymerization of 2,4-(4-hydroxyphenyl)-2,3-phthalazin-1-one with isophthaloyl dichloride (IPC) and terephthaloyl dichloride (TPC). The effects of organic solvents and phase transfer catalysts (PTC) on the intrinsic viscosity ( η int) are systematically investigated for polymers with η int up to 1.52 dL g−1. The polyarylate has a high η int with 1,2-dichloroethane and cetyltrimethylammonium bromide used as the organic phase solvent and PTC. It is found that polyarylates prepared from BPPZ with IPC and TPC have excellent thermal resistance, with glass transition temperatures of 292 and 337°C, respectively. The polyarylates exhibit excellent thermal stability with 5% mass-loss temperature above 469°C in both N2 and air, and residual mass ratios at 800°C in N2 and air above 54.1% and 4.0%, respectively.

Polymeric composite membranes in carbon dioxide capture process: a review

Carbon dioxide (CO₂) emission to the atmosphere is the prime cause of certain environmental issues like global warming and climate change, in the present day scenario. Capturing CO₂ from various stationary industrial emission sources is one of the initial steps to control the aforementioned problems. For this concern, a variety of resources, such as liquid absorbents, solid adsorbents, and membranes, have been utilized for CO₂ capturing from various emission sources. Focused on membrane-based CO₂ capture, polymeric membranes with composite structure (polymeric composite membrane) offer a better performance in CO₂ capturing process than other membranes, due to the composite structure it offers higher gas flux and less material usage, thus facile to use high performed expensive material for membrane fabrication and achieved good efficacy in CO₂ capture. This compressive review delivers the utilization of different polymeric composite membranes in CO₂ capturing applications. Further, the types of polymeric materials used and the different physicochemical modifications of those membrane materials and their CO₂ capturing ability are briefly discussed in the text. In conclusion, the current status and possible perspective ways to improve the CO₂ capture process in industrial CO₂ gas separation applications are described in this review.

Performance of Multilayer Composite Hollow Membrane in Separation of CO2 from CH4 in Mixed Gas Conditions

Composite membranes comprising NH2-MIL-125(Ti)/PEBAX coated on PDMS/PSf were prepared in this work, and their gas separation performance for high CO2 feed gas was investigated under various operating circumstances, such as pressure and CO2 concentration, in mixed gas conditions. The functional groups and morphology of the prepared membranes were characterized by Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). CO2 concentration and feed gas pressure were demonstrated to have a considerable impact on the CO2 and CH4 permeance, as well as the CO2/CH4 mixed gas selectivity of the resultant membrane. As CO2 concentration was raised from 14.5 vol % to 70 vol %, a trade-off between permeance and selectivity was found, as CO2 permeance increased by 136% and CO2/CH4 selectivity reduced by 42.17%. The membrane produced in this work exhibited pressure durability up to 9 bar and adequate gas separation performance at feed gas conditions consisting of high CO2 content.

Surface Modifications of Nanofillers for Carbon Dioxide Separation Nanocomposite Membrane

CO2 separation is an important process for a wide spectrum of industries including petrochemical, refinery and coal-fired power plant industries. The membrane-based process is a promising operation for CO2 separation owing to its fundamental engineering and economic benefits over the conventionally used separation processes. Asymmetric polymer–inorganic nanocomposite membranes are endowed with interesting properties for gas separation processes. The presence of nanosized inorganic nanofiller has offered unprecedented opportunities to address the issues of conventionally used polymeric membranes. Surface modification of nanofillers has become an important strategy to address the shortcomings of nanocomposite membranes in terms of nanofiller agglomeration and poor dispersion and polymer–nanofiller incompatibility. In the context of CO2 gas separation, surface modification of nanofiller is also accomplished to render additional CO2 sorption capacity and facilitated transport properties. This article focuses on the current strategies employed for the surface modification of nanofillers used in the development of CO2 separation nanocomposite membranes. A review based on the recent progresses made in physical and chemical modifications of nanofiller using various techniques and modifying agents is presented. The effectiveness of each strategy and the correlation between the surface modified nanofiller and the CO2 separation performance of the resultant nanocomposite membranes are thoroughly discussed.

Ultrathin permselective membranes: the latent way for efficient gas separation

Membrane gas separation has attracted the attention of chemical engineers for the selective separation of gases. Among the different types of membranes used, ultrathin membranes are recognized to break the trade-off between selectivity and permeance to provide ultimate separation. Such success has been associated with the ultrathin nature of the selective layer as well as their defect-free structure. These membrane features can be obtained from specific membrane preparation procedures used, in which the intrinsic properties of different nanostructured materials (e.g., polymers, zeolites, covalent-organic frameworks, metal-organic frameworks, and graphene and its derivatives) also play a crucial role. It is likely that such a concept of membranes will be explored in the coming years. Therefore, the goal of this review study is to give the latest insights into the use of ultrathin selective barriers, highlighting and describing the primary membrane preparation protocols applied, such as atomic layer deposition, in situ crystal formation, interfacial polymerization, Langmuir-Blodgett technique, facile filtration process, and gutter layer formation, to mention just a few. For this, the most recent approaches are addressed, with particular emphasis on the most relevant results in separating gas molecules. A brief overview of the fundamentals for the application of the techniques is given. Finally, by reviewing the ongoing development works, the concluding remarks and future trends are also provided.

High-performance multilayer composite membranes with mussel-inspired polydopamine as a versatile molecular bridge for CO2 separation

It is desirable to develop high-performance composite membranes for efficient CO2 separation in CO2 capture process. Introduction of a highly permeable polydimethylsiloxane (PDMS) intermediate layer between a selective layer and a porous support has been considered as a simple but efficient way to enhance gas permeance while maintaining high gas selectivity, because the introduced intermediate layer could benefit the formation of an ultrathin defect-free selective layer owing to the circumvention of pore penetration phenomenon. However, the selection of selective layer materials is unfavorably restricted because of the low surface energy of PDMS. Various highly hydrophilic membrane materials such as amino group-rich polyvinylamine (PVAm), a representative facilitated transport membrane material for CO2 separation, could not be facilely coated over the surface of the hydrophobic PDMS intermediate layer uniformly. Inspired by the hydrophilic nature and strong adhesive ability of polydopamine (PDA), PDA was therefore selected as a versatile molecular bridge between hydrophobic PDMS and hydrophilic PVAm. The PDA coating endows a highly compatible interface between both components with a large surface energy difference via multiple-site cooperative interactions. The resulting multilayer composite membrane with a thin facilitated transport PVAm selective layer exhibits a notably enhanced CO2 permeance (1887 GPU) combined with a slightly improved CO2/N2 selectivity (83), as well as superior structural stability. Similarly, the multilayer composite membrane with a hydrophilic CO2-philic Pebax 1657 selective layer was also developed for enhanced CO2 separation performance.