Improving CO 2 separation performance of thin film composite hollow fiber with Pebax®1657/ionic liquid gel membranes

Development of Hollow Fiber Membranes Functionalized with Ionic Liquids for Enhanced CO2 Separation

The combination of CO2-selective ionic liquids (ILs) with block copolymers, such as Pebax 1657, has demonstrated an enhancement of the gas separation capabilities of polymeric membranes. In the current work, the development of composite membranes by applying a thin, concentrated selective layer made of Pebax/imidazolium-based ionic liquids (ILs) is presented. The objective of the experiments was to determine the optimized IL loading and investigate how the alteration of the anion impacts the properties of the membranes. Two membrane configurations have been studied: coated flat sheet membranes, supported on a porous poly(ether sulfone) (PES) layer, as well as composite hollow fiber membranes, supported on commercial polypropylene (PP) hollow fibers. Coated hollow fiber composites were fabricated using a continuous coating method, offering a straightforward scalability in the manufacturing process. The determined mechanical pressure stability of hollow fiber composites reached up to 5 bar, indicating their potential for various industrial gas separation applications. It was found that the Pebax 1657-based coating containing 40 wt % [C6mim][NTf2] yielded membranes with the best gas separation properties, for both the coated flat sheet and the hollow fiber configurations. The CO2 permeance of hollow fibers reached 23.29 GPU, whereas the CO2/N2 ideal selectivity stood at 8.7, suggesting the necessity of the further enhancement of the coating technique, which can be achieved, for example, through application of multiple coatings. Nonetheless, the superior ideal selectivity of the CO2/CO separation, reaching 12.44, gave a promising outlook for further novel membrane applications, which involve the separation of the aforementioned gases.

Micro and Nanoporous Membrane Platforms for Carbon Neutrality: Membrane Gas Separation Prospects

Recently, carbon neutrality has been promoted as a potentially practical solution to global CO2 emissions and increasing energy-consumption challenges. Many attempts have been made to remove CO2 from the environment to address climate change and rising sea levels owing to anthropogenic CO2 emissions. Herein, membrane technology is proposed as a suitable solution for carbon neutrality. This review aims to comprehensively evaluate the currently available scientific research on membranes for carbon capture, focusing on innovative microporous material membranes used for CO2 separation and considering their material, chemical, and physical characteristics and permeability factors. Membranes from such materials comprise metal-organic frameworks, zeolites, silica, porous organic frameworks, and microporous polymers. The critical obstacles related to membrane design, growth, and CO2 capture and usage processes are summarized to establish novel membranes and strategies and accelerate their scaleup.

State-of-the-Art Advances and Current Applications of Gel-Based Membranes

Gel-based membranes, a fusion of polymer networks and liquid components, have emerged as versatile tools in a variety of technological domains thanks to their unique structural and functional attributes. Historically rooted in basic filtration tasks, recent advancements in synthetic strategies have increased the mechanical strength, selectivity, and longevity of these membranes. This review summarizes their evolution, emphasizing breakthroughs that have positioned them at the forefront of cutting-edge applications. They have the potential for desalination and pollutant removal in water treatment processes, delivering efficiency that often surpasses conventional counterparts. The biomedical field has embraced them for drug delivery and tissue engineering, capitalizing on their biocompatibility and tunable properties. Additionally, their pivotal role in energy storage as gel electrolytes in batteries and fuel cells underscores their adaptability. However, despite monumental progress in gel-based membrane research, challenges persist, particularly in scalability and long-term stability. This synthesis provides an overview of the state-of-the-art applications of gel-based membranes and discusses potential strategies to overcome current limitations, laying the foundation for future innovations in this dynamic field.

Response of ionizable block copolymer assemblies to solvent dielectrics: A molecular dynamics study

Ionizable copolymers assembly in solutions is driven by the formation of ionic clusters. Fast clustering of the ionizable blocks often leads to the formation of far-from equilibrium assemblies that ultimately impact the structure of polymer membranes and affect their many applications. Using large-scale atomistic molecular dynamics simulations, we probe the effects of electrostatics on the formation of ionizable copolymer micelles that dominate their solution structure, with the overarching goal of defining the factors that control the assembly of structured ionizable copolymers. A symmetric pentablock ionizable copolymer, with a randomly sulfonated polystyrene center tethered to polyethylene-r-propylene block, terminated by poly(t-butyl styrene), in solvents of varying dielectric constants from 2 to 20, serves as the model system. We find that independent of the solvents, this polymer forms a core-shell micelle with the ionizable segment segregating to the center of the assembly. The specific block conformation, however, strongly depends on the sulfonation levels and the dielectric constant and the polarity of the solvents.

Pathway for Water Transport through Breathable Nanocomposite Membranes of PEBAX with Ionic Liquid [C12C1im]Cl

Water transport through membranes is an attractive topic among the research dedicated to dehydration processes, microenvironment regulation, or more simply, recovery of freshwater. Herein, an atomistic computer simulation is proposed to provide new insights about a water vapor transport mechanism through PEBAX membranes filled with ionic liquid (IL) [C12C1im]Cl. Starting from experimental evidence that indicates an effective increase in water permeation as the IL is added to the polymer matrix (e.g., up to 85·10-3 (g·m)/(m2·day) at 318.15 K for PEBAX@2533 membranes loaded with 70% of IL), molecular dynamics simulations are proposed to explore the key role of IL in water transport inside membranes. The polar region composed of anions and cationic head groups of the IL is demonstrated to serve as the pathway for water transport through the membrane. Water molecules always stay near the pathway, which becomes wider and thus has a larger water-accessible area with increasing IL concentration. Hence, the diffusion coefficients of water molecules and ions increase as the IL concentration increases. The simulation provides useful indications about a microscopic mechanism that regulates the transport of water vapor through a kind of PEBAX/IL membrane, resulting in full agreement with the experimental evidence.

Nanocarbon-Based Mixed Matrix Pebax-1657 Flat Sheet Membranes for CO2/CH4 Separation

In the present work, Pebax-1657, a commercial multiblock copolymer (poly(ether-block-amide)), consisting of 40% rigid amide (PA6) groups and 60% flexible ether (PEO) linkages, was selected as the base polymer for preparing dense flat sheet mixed matrix membranes (MMMs) using the solution casting method. Carbon nanofillers, specifically, raw and treated (plasma and oxidized) multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were incorporated into the polymeric matrix in order to improve the gas-separation performance and polymer's structural properties. The developed membranes were characterized by means of SEM and FTIR, and their mechanical properties were also evaluated. Well-established models were employed in order to compare the experimental data with theoretical calculations concerning the tensile properties of MMMs. Most remarkably, the tensile strength of the mixed matrix membrane with oxidized GNPs was enhanced by 55.3% compared to the pure polymeric membrane, and its tensile modulus increased 3.2 times compared to the neat one. In addition, the effect of nanofiller type, structure and amount to real binary CO₂/CH₄ (10/90 vol.%) mixture separation performance was evaluated under elevated pressure conditions. A maximum CO₂/CH₄ separation factor of 21.9 was reached with CO₂ permeability of 384 Barrer. Overall, MMMs exhibited enhanced gas permeabilities (up to fivefold values) without sacrificing gas selectivity compared to the corresponding pure polymeric membrane.

Improved CO2/N2 separation performance of Pebax-1074 blend membranes containing poly(ethylene glycol)

Developing blend membrane material is one feasible and effective route for improving the gas separation efficiency and commercial attractiveness of membrane technologies. Here, free-standing membranes were prepared by casting method using Pebax-1074 as continuous polymer matrix and poly(ethylene glycol) (PEG) as dispersive organic fillers. The morphology, surface functional groups, microstructure and thermal stability of the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry, respectively. The effects of preparation variables including average molecular weight and dosage of PEG on the microstructure, morphology and properties of the blend membranes were investigated. In addition, the effects of operation conditions including permeation temperature and permeation pressure on the gas separation performance of the blend membranes were also examined. The results showed that the addition of PEG can obviously modify the structure-properties and significantly improve the separation performance of resultant membranes. Under the conditions of 30°C and 0.25 MPa, the optimal CO2 permeability and CO2/N2 selectivity respectively reached to 124.3Barrer and 115.8 for the blend membranes made by PEG600 with a content of 20% in Pebax-1074 matrix. In brief, the as-prepared blend membranes are proved to be promising for CO2/N2 separation application.

Poly(ethylene oxide)-Based Copolymer-IL Composite Membranes for CO2 Separation

Poly(ethylene oxide) (PEO)-based copolymers are at the forefront of advanced membrane materials for selective CO₂ separation. In this work, free-standing composite membranes were prepared by blending imidazolium-based ionic liquids (ILs) having different structural characteristics with a PEO-based copolymer previously developed by our group, targeting CO₂ permeability improvement and effective CO₂/gas separation. The effect of IL loading (30 and 40 wt%), alkyl chain length of the imidazolium cation (ethyl- and hexyl- chain) and the nature of the anion (TFSI^-, C(CN)₃^-) on physicochemical and gas transport properties were studied. Among all composite membranes, PEO-based copolymer with 40 wt% IL3-[HMIM][TFSI] containing the longer alkyl chain of the cation and TFSI^- as the anion exhibited the highest CO₂ permeability of 46.1 Barrer and ideal CO₂/H₂ and CO₂/CH₄ selectivities of 5.6 and 39.0, respectively, at 30 °C. In addition, almost all composite membranes surpassed the upper bound limit for CO₂/H₂ separation. The above membrane showed the highest water vapor permeability value of 50,000 Barrer under both wet and dry conditions and a corresponding H₂O/CO₂ ideal selectivity value of 1080; values that are comparable with those reported for other highly water-selective PEO-based polymers. These results suggest the potential application of this membrane in hydrogen purification and dehydration of CO₂ gas streams.

Technological advancements in the use of ionic liquid- membrane systems for CO2 capture from biogas/flue gas - A review

Carbon capture has become a very important method for curbing the problems associated with the release of carbon dioxide into the atmosphere, which in turn has detrimental effects on the planet and its inhabitants. Ionic liquids and membrane separation have been explored in this review paper as effective means of capturing carbon dioxide. An innovative approach to CO₂ capture is the use of Ionic liquids (ILs) since they exhibit certain significant traits such as good stability (thermal, mechanical and chemical), inflammability and high absorptive capacities. Ionic liquids (ILs) are widely regarded as nontoxic substances. Viscosity and thermal degradation of ILs at temperatures slightly above 100 °C are the major disadvantages of ILs. Membrane separation is a technique used for the effective separation of substances by materials bearing holes in a continuous structure. Membrane technology has gained significant improvements, over the years. Several ILs and membrane systems were considered in this work. Their weaknesses, strengths, permeability, selectivity, operating conditions and carbon capture efficiencies, were all highlighted in order to gain a good perspective on ways by which the individual systems can be improved upon. The study considered several polymer-Ionic liquid hybrid materials as viable options for CO₂ capture from a post-combustion process. Different ILs were scrutinized for possible integration in membranes by taking full advantage of their individual properties and harnessing their tune-able characteristics in order to improve the overall carbon capture performance of the system. Several options for improving the mechanical, chemical, and thermal stabilities of the hybrid systems were considered including the use of cellulose acetate membrane, nanoparticles (graphene oxide powder) alongside potential ionic liquids. Doping membranes with ILs and nanoparticulates such as graphene oxide serves as a potential method for enhancing the CO₂ capture of membranes and this review provides several evidences that serve as proofs for this concept.

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

State-of-the-Art Organic- and Inorganic-Based Hollow Fiber Membranes in Liquid and Gas Applications: Looking Back and Beyond

The aggravation of environmental problems such as water scarcity and air pollution has called upon the need for a sustainable solution globally. Membrane technology, owing to its simplicity, sustainability, and cost-effectiveness, has emerged as one of the favorable technologies for water and air purification. Among all of the membrane configurations, hollow fiber membranes hold promise due to their outstanding packing density and ease of module assembly. Herein, this review systematically outlines the fundamentals of hollow fiber membranes, which comprise the structural analyses and phase inversion mechanism. Furthermore, illustrations of the latest advances in the fabrication of organic, inorganic, and composite hollow fiber membranes are presented. Key findings on the utilization of hollow fiber membranes in microfiltration (MF), nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), pervaporation, gas and vapor separation, membrane distillation, and membrane contactor are also reported. Moreover, the applications in nuclear waste treatment and biomedical fields such as hemodialysis and drug delivery are emphasized. Subsequently, the emerging R&D areas, precisely on green fabrication and modification techniques as well as sustainable materials for hollow fiber membranes, are highlighted. Last but not least, this review offers invigorating perspectives on the future directions for the design of next-generation hollow fiber membranes for various applications. As such, the comprehensive and critical insights gained in this review are anticipated to provide a new research doorway to stimulate the future development and optimization of hollow fiber membranes.

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

Mixed matrix membranes (MMMs) have attracted significant attention for overcoming the limitations of traditional polymeric membranes for gas separation through the improvement of both permeability and selectivity. However, the development of defect-free MMMs remains challenging due to the poor compatibility of the metal–organic framework (MOF) with the polymer matrix. Thus, we report a surface-modification strategy for a MOF through grafting of a polymer with intrinsic microporosity onto the surface of UiO-66-NH₂. This method allows us to engineer the MOF–polymer interface in the MMMs using Pebax as a support. The insertion of a PIM structure onto the surface of UiO-66-NH₂ provides additional molecular transport channels and enhances the CO₂ transport by increasing the compatibility between the polymer and fillers for efficient gas separation. As a result, MMM with 1 wt% loading of PIM-grafted-MOF (PIM-g-MOF) exhibited very promising separation performance, with CO₂ permeability of 247 Barrer and CO₂/N₂ selectivity of 56.1, which lies on the 2008 Robeson upper bound. Moreover, this MMM has excellent anti-aging properties for up to 240 days and improved mechanical properties (yield stress of 16.08 MPa, Young’s modulus of 1.61 GPa, and 596.5% elongation at break).

Poly(ethylene glycol) Diacrylate Iongel Membranes Reinforced with Nanoclays for CO2 Separation

Despite the fact that iongels are very attractive materials for gas separation membranes, they often show mechanical stability issues mainly due to the high ionic liquid (IL) content (≥60 wt%) needed to achieve high gas separation performances. This work investigates a strategy to improve the mechanical properties of iongel membranes, which consists in the incorporation of montmorillonite (MMT) nanoclay, from 0.2 to 7.5 wt%, into a cross-linked poly(ethylene glycol) diacrylate (PEGDA) network containing 60 wt% of the IL 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][TFSI]). The iongels were prepared by a simple one-pot method using ultraviolet (UV) initiated polymerization of poly(ethylene glycol) diacrylate (PEGDA) and characterized by several techniques to assess their physico-chemical properties. The thermal stability of the iongels was influenced by the addition of higher MMT contents (>5 wt%). It was possible to improve both puncture strength and elongation at break with MMT contents up to 1 wt%. Furthermore, the highest ideal gas selectivities were achieved for iongels containing 0.5 wt% MMT, while the highest CO2 permeability was observed at 7.5 wt% MMT content, due to an increase in diffusivity. Remarkably, this strategy allowed for the preparation and gas permeation of self-standing iongel containing 80 wt% IL, which had not been possible up until now.

Emerging iongel materials towards applications in energy and bioelectronics

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

A 2D Graphitic-Polytriaminopyrimidine (g-PTAP)/Poly(ether-block-amide) Mixed Matrix Membrane for CO2 Separation

Poly(ether-block-amide)/g-PTAP mixed matrix membranes (MMMs) were developed by incorporating different wt.% (1-10%) of a novel 2D g-PTAP nanofiller and its effects on membrane structure and gas permeability were studied. The novel 2D material g-PTAP was synthesized and characterized by various analytical techniques including field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Raman spectroscopy. The fabricated MMMs were investigated to study the interaction and compatibility between Pebax and g-PTAP. The MMMs showed an effective integration of g-PTAP nanofiller into the Pebax matrix without affecting its thermal stability. Gas permeation experiments with MMMs showed improved CO₂ permeability and selectivity (CO₂ /N₂ ) upon incorporation of g-PTAP in the Pebax polymer matrix. The maximum CO₂ permeability enhancement from 82.3 to 154.6 Barrer with highest CO₂ /N₂ selectivity from 49.5 to 83.5 were found with 2.5 wt.% of nanofiller compared to neat Pebax membranes.

Fabrication of Polydimethysiloxane (PDMS) Dense Layer on Polyetherimide (PEI) Hollow Fiber Support for the Efficient CO2/N2 Separation Membranes

The development of thin layer on hollow-fiber substrate has drawn great attention in the gas-separation process. In this work, polydimethysiloxane (PDMS)/polyetherimide (PEI) hollow-fiber membranes were prepared by using the dip-coating method. The prepared membranes were characterized by Scanning Electron Microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and gas permeance measurements. The concentration of PDMS solution and coating time revealed an important influence on the gas permeance and the thickness of the PDMS layer. It was confirmed from the SEM and EDX results that the PDMS layer’s thickness and the atomic content of silicon in the selective layer increased with the growth in coating time and the concentration of PDMS solution. The composite hollow-fiber membrane prepared from 15 wt% PDMS solution at 10 min coating time showed the best gas-separation performance with CO₂ permeance of 51 GPU and CO₂/N₂ ideal selectivity of 21.

A Review on Ionic Liquid Gas Separation Membranes

Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.

Organic Ionic Plastic Crystal-Based Composite Membranes for Light Gas Separation: The Impact of Varying Ion Type and Casting Method

The promise of organic ionic plastic crystals (OIPCs) for development of a novel type of gas separation membrane with competitive gas selectivity for CO₂ /N₂ was recently demonstrated. This work aimed to design more selective membranes by investigating a different type of OIPC and a new membrane preparation method. Two different OIPCs were solvent-cast or co-cast with poly(vinylidene difluoride) (PVDF), and their gas transport properties were compared. The first OIPC, methyl(diethyl)isobutylphosphonium hexafluorophosphate ([P_122i4 ][PF₆ ]), was previously studied using the co-cast method, and this was used as a benchmark. The second, N-methyl-N-ethylpyrrolidinium bis(fluorosulfonyl)imide ([C₂ mpyr][FSI]), was investigated for the first time for gas separation applications, achieving high selectivities (α CO 2 / N 2 >40). The thermophysical properties of the composites indicated that the co-casting method is a good way to fabricate solid, mechanically stable and durable membranes. Additionally, the enhanced molecular interactions indicated in OIPC/PVDF co-cast composites point to a new approach for synthesis of other highly selective OIPC-based membranes.

Critical Role of the Molecular Interface in Double-Layered Pebax-1657/PDMS Nanomembranes for Highly Efficient CO2/N2 Gas Separation

In this work, we deposited a CO₂-selective block copolymer, Pebax-1657, as a selective layer with a thickness of 2-20 nm on the oxygen plasma-activated surface of poly(dimethylsiloxane) (PDMS) used as a gutter layer (thickness ∼400 nm). This double-layered structure was subsequently transferred onto the polyacrylonitrile (PAN) microporous support and studied for CO₂/N₂ separation. The effect of interfacial molecular arrangements between the selective and gutter layers on CO₂ permeance and selectivity has been investigated. We have revealed that the gas permeance and selectivity do not follow the conventional theoretical predictions for the multilayer membrane (resistance in series transport model); specifically, more selective CO₂/N₂ separation membranes were achieved with ultrathin selective layers. Detailed characterization of the chemical structure of the outermost membrane surface suggests that nanoscale blending of the ultrathin Pebax-1657 layer with O₂ plasma-activated PDMS chains on the surface takes place. This nanoblending at the interface between the selective and gutter layers played a critical role in enhancing the CO₂/N₂ selectivity. CO₂ permeances in the developed thin-film composite membranes (TFCM) were between 1200 and 3500 gas permeance units (GPU) and the respective CO₂/N₂ selectivities were between 72 and 23, providing the gas separation performance suitable for CO₂ capture in postcombustion processes. This interpenetrating polymer interface enhanced the overall selectivity of the membrane significantly, exceeding the separation ability of the pristine Pebax-1657 polymer.

Development of Thin-Film Composite Membranes from Aromatic Cardo-Type Co-Polyimide for Mixed and Sour Gas Separations from Natural Gas

The consumption of natural gas (NG) is rapidly increasing worldwide as it is becoming the second largest fuel source after coal. However, many of the world gas reserves contain high levels of subquality NG including the presence of carbon dioxide (CO2), hydrogen sulfide (H2S), nitrogen (N2), benzene/toluene/xylene (BTX) etc., in varying amounts (up to 50% v/v in some reserves), which constitute several problems. Membrane-based NG sweetening/upgrading processes emerge as among the fastest growing technologies, due to their lower capital cost, higher energy savings, greater economic viability, etc. as compared to conventional technologies. Thus, a defective-free, multilayer thin-film composite membrane is developed from 6FDA-Durene/6FDA-CARDO block co-polyimide for the separation of sour gas from NG. The membrane shows good performance as it exhibit CO2/CH4 and H2S/CH4 selectivities ranges from 8 to 10 and 15 to 19, respectively, and CO2 and H2S permeance are 122 and 220 GPU, respectively.