1
|
Guo H, Gao H, Yan A, Lu X, Wu C, Gao L, Zhang J. Treatment to surfactant containing wastewater with membrane distillation membrane with novel sandwich structure. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 867:161195. [PMID: 36581298 DOI: 10.1016/j.scitotenv.2022.161195] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/20/2022] [Revised: 12/13/2022] [Accepted: 12/21/2022] [Indexed: 06/17/2023]
Abstract
Surfactant containing wastewater widely exists in textile industry, which hardly to be treated by membrane technology due to its high in salinity and wetting potential. In this study, PVDF membrane was modified by constructing a PDMS-SiO2-PDMS "sandwich" structure on top of its surface via coating to achieve resistance to surfactant induced wetting. The "sandwich" layer was optimized based on the membrane performance during membrane distillation. Compared to the pristine PVDF membrane with contact angle of 92°, the water contact angle of the membrane with a "sandwich" layer of 0.44 μm increased to 153°. For the feed contained 0.5 wt% NaCl and 0.25 wt% surfactant, there was no membrane wetting occurred during the experiment period using the membrane with a "sandwich" structure, in comparison to the pristine PVDF membrane being wetted from beginning. For a challenge experiment to the developed membrane lasting for 100 h using a surfactant containing feed, there is no wetting sign observed and the stable flux is 20 kg·m-2·h-1.
Collapse
Affiliation(s)
- Hanyu Guo
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Material Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Haifu Gao
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Material Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - An Yan
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Material Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Xiaolong Lu
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Material Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Chunrui Wu
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Material Science and Engineering, Tiangong University, Tianjin 300387, PR China.
| | - Li Gao
- ISILC, Victoria University, PO Box 14428, Melbourne, Victoria 8001, Australia; South East Water Corporation, PO Box 2268, Seaford, Victoria 3198, Australia
| | - Jianhua Zhang
- ISILC, Victoria University, PO Box 14428, Melbourne, Victoria 8001, Australia.
| |
Collapse
|
2
|
Ren K, Lu X, Zheng S, Zhang S, Ma R, Yang Y. A novel preparation method for protective coating on hydrophobic membrane based on vapor opposite transmission process. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2023.123110] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
|
3
|
Preparation and stability enhancement of anchor bonded 3D-network extracting membrane for nickel extraction. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.121339] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
4
|
Xu H, Zhang Q, Song N, Chen J, Ding M, Mei C, Zong Y, Chen X, Gao L. Membrane distillation by novel Janus-enhanced membrane featuring hydrophobic-hydrophilic dual-surface for freshwater recovery. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.122036] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
5
|
Low-Cost Multifunctional Vacuum Chamber for Manufacturing PDMS Based Composites. MACHINES 2022. [DOI: 10.3390/machines10020092] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Polydimethylsiloxane (PDMS) is one of the best known elastomers and has been used in several areas of activity, due to its excellent characteristics and properties, such as biocompatibility, flexibility, optical transparency and chemical stability. Furthermore, PDMS modified with other materials promotes the desired changes to broaden its range of applications in various fields of science. However, the heating, mixing and degassing steps of the manufacturing process have not received much attention in recent years when it comes to blending with solid materials. For instance, PDMS has been extensively studied in combination with waxes, which are frequently in a solid state at room temperature and as a result the interaction and manufacturing process are extremely complex and can compromise the desired material. Thus, in this work it is proposed a multifunctional vacuum chamber (MVC) with the aim to improve and accelerate the manufacturing process of PDMS composites combined with additives, blends and different kinds of solid materials. The MVC developed in this work allows to control the mixing speed parameters, temperature control and internal pressure. In addition, it is a low cost equipment and can be used for other possible modifications with different materials and processes with the ability to control those parameters. As a result, samples fabricated by using the MVC can achieve a time improvement over 133% at the heating and mixing step and approximately 200% at the last degassing step. Regarding the complete manufacturing process, it is possible to achieve an improvement over 150%, when compared with the conventional manufacturing process. When compared to maximum tensile strength, specimens manufactured using the MVC have shown a 39% and 65% improvement in maximum strain. The samples have also shown a 9% improvement in transparency at room temperature and 12% at a temperature of about 75 °C. It should be noted that the proposed MVC can be used for other blends and manufacturing processes where it is desirable to control the temperature, agitation speed and pressure.
Collapse
|
6
|
Ariati R, Sales F, Souza A, Lima RA, Ribeiro J. Polydimethylsiloxane Composites Characterization and Its Applications: A Review. Polymers (Basel) 2021; 13:polym13234258. [PMID: 34883762 PMCID: PMC8659928 DOI: 10.3390/polym13234258] [Citation(s) in RCA: 53] [Impact Index Per Article: 17.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2021] [Revised: 11/30/2021] [Accepted: 12/02/2021] [Indexed: 11/16/2022] Open
Abstract
Polydimethylsiloxane (PDMS) is one of the most promising elastomers due its remarkable proprieties such as good thermal stability, biocompatibility, corrosion resistance, flexibility, low cost, ease of use, chemically inertia, hyperplastic characteristics, and gas permeability. Thus, it can be used in areas such as microfluidic systems, biomedical devices, electronic components, membranes for filtering and pervaporation, sensors, and coatings. Although pure PDMS has low mechanical properties, such as low modulus of elasticity and strength, it can be improved by mixing the PDMS with other polymers and by adding particles or reinforcements. Fiber-reinforced PDMS has proved to be a good alternative to manufacturing flexible displays, batteries, wearable devices, tactile sensors, and energy harvesting systems. PDMS and particulates are often used in the separation of liquids from wastewater by means of porosity followed by hydrophobicity. Waxes such as beeswax and paraffin have proved to be materials capable of improving properties such as the hydrophobic, corrosion-resistant, thermal, and optical properties of PDMS. Finally, when blended with polymers such as poly (vinyl chloride-co-vinyl acetate), PDMS becomes a highly efficient alternative for membrane separation applications. However, to the best of our knowledge there are few works dedicated to the review and comparison of different PDMS composites. Hence, this review will be focused on PDMS composites, their respective applications, and properties. Generally, the combination of elastomer with fibers, particles, waxes, polymers, and others it will be discussed, with the aim of producing a review that demonstrates the wide applications of this material and how tailored characteristics can be reached for custom applications.
Collapse
Affiliation(s)
- Ronaldo Ariati
- ESTiG, Instituto Politécnico de Bragança, 5300-252 Bragança, Portugal; (R.A.); (F.S.); (J.R.)
| | - Flaminio Sales
- ESTiG, Instituto Politécnico de Bragança, 5300-252 Bragança, Portugal; (R.A.); (F.S.); (J.R.)
| | - Andrews Souza
- MEtRICs, Mechanical Engineering Department, Campus de Azurém, University of Minho, 4800-058 Guimarães, Portugal;
| | - Rui A. Lima
- MEtRICs, Mechanical Engineering Department, Campus de Azurém, University of Minho, 4800-058 Guimarães, Portugal;
- CEFT, Faculdade de Engenharia da Universidade do Porto (FEUP), Rua Roberto Frias, 4200-465 Porto, Portugal
- Correspondence:
| | - João Ribeiro
- ESTiG, Instituto Politécnico de Bragança, 5300-252 Bragança, Portugal; (R.A.); (F.S.); (J.R.)
- CIMO, Instituto Politécnico de Bragança, 5300-252 Bragança, Portugal
| |
Collapse
|
7
|
Nguyen CH, Tran TTV, Huang WC, Juang RS. Experimental verification on stability analysis of supported-liquid-membrane separation of metal ions by in-situ electrical impedance spectroscopy. J Taiwan Inst Chem Eng 2021. [DOI: 10.1016/j.jtice.2021.09.011] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
8
|
Application of Hybrid Membrane Processes Coupling Separation and Biological or Chemical Reaction in Advanced Wastewater Treatment. MEMBRANES 2020; 10:membranes10100281. [PMID: 33066241 PMCID: PMC7602016 DOI: 10.3390/membranes10100281] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/07/2020] [Revised: 09/29/2020] [Accepted: 10/09/2020] [Indexed: 02/01/2023]
Abstract
The rapid urbanization and water shortage impose an urgent need in improving sustainable water management without compromising the socioeconomic development all around the world. In this context, reclaimed wastewater has been recognized as a sustainable water management strategy since it represents an alternative water resource for non-potable or (indirect) potable use. The conventional wastewater remediation approaches for the removal of different emerging contaminants (pharmaceuticals, dyes, metal ions, etc.) are unable to remove/destroy them completely. Hybrid membrane processes (HMPs) are a powerful solution for removing emerging pollutants from wastewater. On this aspect, the present paper focused on HMPs obtained by the synergic coupling of biological and/or chemical reaction driven processes with membrane processes, giving a critical overview and particular emphasis on some case studies reported in the pertinent literature. By using these processes, a satisfactory quality of treated water can be achieved, permitting its sustainable reuse in the hydrologic cycle while minimizing environmental and economic impact.
Collapse
|
9
|
Tajabadi F, Ghambarian M. Carrier-mediated extraction: Applications in extraction and microextraction methods. Talanta 2020; 206:120145. [PMID: 31514894 DOI: 10.1016/j.talanta.2019.120145] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2019] [Revised: 07/06/2019] [Accepted: 07/08/2019] [Indexed: 11/19/2022]
Abstract
The present review is mainly focused on the overview of carrier mediated extraction (principles and applications) being reported over the last two decades and discusses the extraction process through carriers in various extraction methods such as Bulk liquid membranes, supported liquid membranes, emulsion liquid membranes and polymer inclusion membranes. Several types of carriers such as neutral, anionic, cationic, macrocyclic and supramulecular carriers are discussed. Also their application for metal, anions, drugs and environmental compounds are investigated. Carriers have been demonstrated to be useful for the selective extraction and recovery of numerous cations and anions enhancing the extraction properties of traditional solvent extraction and ion-exchange processes. Several types of carriers have different transport mechanisms. In these mechanisms, transport configurations are addressed and emphasized and the detailed information on the type of carrier are presented along with their specific separation modes. The performance of different carriers in terms of selectivity as well as efficiency are also discussed. Finally, the application of different carriers for the extraction of various compounds are compared and reviewed. To our best knowledge no reviews have been published on carrier-mediated extraction methods.
Collapse
Affiliation(s)
- Fateme Tajabadi
- Medicinal Plants Research Center, Institute of Medicinal Plants, ACECR, Karaj, Iran.
| | - Mahnaz Ghambarian
- Iranian Research and Development Center for Chemical Industries, ACECR, Tehran, Iran
| |
Collapse
|
10
|
Ziobrowski Z, Rotkegel A. Enhanced CO2/N2 separation by supported ionic liquid membranes (SILMs) based on PDMS and 1-ethyl-3-methylimidazolium acetate. CHEM ENG COMMUN 2019. [DOI: 10.1080/00986445.2019.1694916] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
Affiliation(s)
- Z. Ziobrowski
- Institute of Chemical Engineering, Polish Academy of Sciences, Gliwice, Poland
| | - A. Rotkegel
- Institute of Chemical Engineering, Polish Academy of Sciences, Gliwice, Poland
| |
Collapse
|
11
|
Lu X, Chen Q, Zhao D, Zhu J, Ji J. Silver-based ionic liquid as separation media: Supported liquid membrane for facilitated methyl linolenate transport. J Memb Sci 2019. [DOI: 10.1016/j.memsci.2019.05.027] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|