Titanium carbide Ti3C2Tx (MXene) enhanced PAN nanofiber membrane for air purification

Electrospun nanofibrous membranes meet antibacterial nanomaterials: From preparation strategies to biomedical applications

Electrospun nanofibrous membranes (eNFMs) have been extensively developed for bio-applications due to their structural and compositional similarity to the natural extracellular matrix. However, the emergence of antibiotic resistance in bacterial infections significantly impedes the further development and applications of eNFMs. The development of antibacterial nanomaterials substantially nourishes the engineering design of antibacterial eNFMs for combating bacterial infections without relying on antibiotics. Herein, a comprehensive review of diverse fabrication techniques for incorporating antibacterial nanomaterials into eNFMs is presented, encompassing an exhaustive introduction to various nanomaterials and their bactericidal mechanisms. Furthermore, the latest achievements and breakthroughs in the application of these antibacterial eNFMs in tissue regenerative therapy, mainly focusing on skin, bone, periodontal and tendon tissues regeneration and repair, are systematically summarized and discussed. In particular, for the treatment of skin infection wounds, we highlight the antibiotic-free antibacterial therapy strategies of antibacterial eNFMs, including (i) single model therapies such as metal ion therapy, chemodynamic therapy, photothermal therapy, and photodynamic therapy; and (ii) multi-model therapies involving arbitrary combinations of these single models. Additionally, the limitations, challenges and future opportunities of antibacterial eNFMs in biomedical applications are also discussed. We anticipate that this comprehensive review will provide novel insights for the design and utilization of antibacterial eNFMs in future research.

Heterointerface engineering of MXene: Advanced applications in environmental remediation

Contemporary global industrialization, coupled with the relentless growth of the population, has led to a persistent escalation in the emission and accumulation of various toxic and harmful chemicals in the environment, severely disrupting the ecological balance. The development of efficient environmental cleanup materials is a crucial scientific and technological concern. Since the groundbreaking work on Ti3C2Tx in 2011, there has been a huge growing interest in MXene-based composites developed through heterointerface engineering due to its high surface area, hydrophilicity, eco-friendliness, biocompatibility, easy functionalization, excellent thermal/mechanical properties, metal conductivity and rich electronic density. In the area of environmental remediation, MXene-based composites obtained through heterointerface engineering strategies have the ability to effectively remove and systematically monitor contaminants in comparison to virgin MXene, thanks to the synergistic effects and complementary benefits. Heterointerface engineering strategy increases specific surface area, introduces catalytic sites, constructs heterojunctions/Schottky junctions, and facilitates carrier migration and electron-hole separation. These novel MXene-based composites represent significant advances in MXene research and deserve a comprehensive review. Although several excellent reviews and perspectives on the application of MXene-based composites in environmental remediation have been published, there is still a scarcity of comprehensive and systematic assessments on the reliable data and mechanisms of various MXene-based composite materials for pollutant removal and monitoring. In this focused review, the first part briefly introduces the common preparation strategies and characterization methods of single MXene and MXene-based composites, and the second part details the innovative application of MXene-based composites (involving the amalgamation of MXene with metal oxides, metal sulfide, g-C3N4, layered double hydroxides, metal-organic frameworks, single atom/quantum dots, polymers, etc.) in the field of environmental remediation, including carbon dioxide reduction, nitrogen monoxide and volatile organic compounds removal, antibiotic and heavy metal ions degradation, summarizing the relevant performance and mechanisms. Furthermore, the recent advancements in the utilization of MXene-based composites for the sensing of emerging environmental contaminants (antibiotic and antibiotic resistance genes) are summarized. Finally, an outline of the existing challenges and future prospects on this exciting field was narrated for plausible real-world use. This review will help to inspire the diverse design of MXene-based composites and to advance research related to their application in the environmental sector.

Preparation, Air Filtration Performance of a Fluorinated Polyimide/Polyacrylonitrile Nanofibrous Membrane by Electrospinning

This paper reports the successful fabrication of a new nanofibrous membrane, F-PI/PAN, through electrospinning of polyacrylonitrile (PAN) and fluorinated polyimide (F-PI). The nanofibrous membrane exhibits comprehensive properties for high-temperature filtration and robust PM2.5 (particulate matter with an aerodynamic equivalent diameter of 2.5 microns or less) removal. The introduction of F enhances the hydrophobicity of the PI. The relationship between the hydrophobic performance and the filtration performance of particles is investigated. The chemical group of the composite membrane was demonstrated using FITR, while the surface morphology was investigated using field emission scanning electron microscopy. The TGA results indicated good thermal stability at 300 °C. Various ratios of F-PI membranes were prepared to characterize the change in properties, with the optimal mass ratio of F-PI being 20 wt%. As the proportion of F-PI increases, its mechanical and filtration efficiency properties and hydrophobicity become stronger. The contact angle reaches its maximum of 128 ± 5.2° when PAN:F-PI = 6:4. Meanwhile, when PAN:F-PI = 8:2, the filtration efficiency reaches 99.4 ± 0.3%, and the elongation at break can reach 76%. The fracture strength can also reach 7.1 MPa, 1.63 times that of the pure PAN membrane.

Bicomponent core/sheath melt-blown fibers for air filtration with ultra-low resistance

With the escalating air pollution and frequent outbreaks of airborne diseases, there is a growing demand for personal protective filtration media. Melt-blown nonwovens have proven to be highly effective in capturing tiny particles, but their tightly packed fiber assemblages are more resistant to airflow and less comfortable to breathe. Here, we present a one-step melt-blown spinning process for the production of bicomponent core/sheath (BCS) crimped fibers and their application in high-efficiency, low-resistance air filtration. Fiber curl is caused by unbalanced internal stresses resulting from differences in the structure components, resulting in uneven shrinkage inside and outside the fibers. The resulting CM@S-2 filtration media features a uniform fiber curl and a porous fiber mesh structure, which reduces air filtration resistance. Under the same filtration conditions, the filtration efficiency of CM@S-2 (96.58% vs. 95.58%), filtration resistance (56.1 Pa vs. 108.0 Pa), quality factor (0.061 Pa-1vs. 0.029 Pa-1), and dust holding capacity (10.60 g m-2vs. 9.10 g m-2) were comparable to those of the single-component polypropylene filters. The filtration efficiency of the CM@S-2 remained above 94.0% after 30 days of indoor storage. Computational Fluid Dynamics (CFD) simulation demonstrated that crimped fibers effectively reduce pressure surges on the filter media caused by fiber accumulation. In comparative tests with commercial masks, the CM@S-2 cartridge masks demonstrated superior air permeability compared to commercial masks under similar filtration conditions. In conclusion, the bicomponent core/sheath melt-blown fibers significantly reduce air resistance and show excellent potential for application in protective masks.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

MXene-Based Elastomer Mimetic Stretchable Sensors: Design, Properties, and Applications

Flexible sensors based on MXene-polymer composites are highly prospective for next-generation wearable electronics used in human-machine interfaces. One of the motivating factors behind the progress of flexible sensors is the steady arrival of new conductive materials. MXenes, a new family of 2D nanomaterials, have been drawing attention since the last decade due to their high electronic conductivity, processability, mechanical robustness and chemical tunability. In this review, we encompass the fabrication of MXene-based polymeric nanocomposites, their structure-property relationship, and applications in the flexible sensor domain. Moreover, our discussion is not only limited to sensor design, their mechanism, and various modes of sensing platform, but also their future perspective and market throughout the world. With our article, we intend to fortify the bond between flexible matrices and MXenes thus promoting the swift advancement of flexible MXene-sensors for wearable technologies.

MXene-based Membranes for Drinking Water Production

The soaring development of industry exacerbates the shortage of fresh water, making drinking water production an urgent demand. Membrane techniques feature the merits of high efficiency, low energy consumption, and easy operation, deemed as the most potential technology to purify water. Recently, a new type of two-dimensional materials, MXenes as the transition metal carbides or nitrides in the shape of nanosheets, have attracted enormous interest in water purification due to their extraordinary properties such as adjustable hydrophilicity, easy processibility, antifouling resistance, mechanical strength, and light-to-heat transformation capability. In pioneering studies, MXene-based membranes have been evaluated in the past decade for drinking water production including the separation of bacteria, dyes, salts, and heavy metals. This review focuses on the recent advancement of MXene-based membranes for drinking water production. A brief introduction of MXenes is given first, followed by descriptions of their unique properties. Then, the preparation methods of MXene membranes are summarized. The various applications of MXene membranes in water treatment and the corresponding separation mechanisms are discussed in detail. Finally, the challenges and prospects of MXene membranes are presented with the hope to provide insightful guidance on the future design and fabrication of high-performance MXene membranes.

Small Things Make a Big Difference: Conductive Cross-Linking Sodium Alginate@MXene Binder Enables High-Volumetric-Capacity and High-Mass-Loading Li-S Battery

Binders are crucial for maintaining the integrity of an electrode, and there is a growing need for integrating multiple desirable properties into the binder for high-energy batteries, yet significant challenges remain. Here, we successfully synthesized a new binder by cross-linking sodium alginate (SA) with MXene materials (Ti3C2Tx). Besides the improved adhesion and mechanical properties, the integrated SA@Ti3C2Tx binder demonstrates much improved electronic conductivity, which enables ruling out the fluffy conductive additive from the electrode component with enhanced volumetric capacity. When SA@Ti3C2Tx is used to fabricate sulfur (S) cathodes, the conductive-additive-free electrode demonstrates extremely high capacity (1422 mAh cm-3/24.5 mAh cm-2) under an S loading of 17.2 mg cm-2 for Li-S batteries. Impressively, the SA@Ti3C2Tx binder shows remarkable feasibility in other battery systems such as Na-S and LiFePO4 batteries. The proposed strategy of constructing a cross-linking conductive binder opens new possibilities for designing high-mass-loading electrodes with high volumetric capacity.

MXene nanosheets woven in polyacrylonitrile nanofiber yarns aligned spider web as a highly efficient sorbent for in-tube solid phase microextraction of beta-blockers from biofluids

The use of electrospinning has received much attention in the production of nanofiber webs due to its advantages such as flexibility and simplicity. The direct electrospinning of nanofibers in an aligned or twisted form and the production of nanofiber yarns can turn nanofibers into woven fabrics, which leads to an increase in the diversity of nanofiber applications and improves their end-use possibilities. In this work, a victorious nanofiber yarn spinning system was used with the help of a rotating funnel. Yarn formation was studied using a composited polyacrylonitrile (PAN)/MXene polymer solution ejected from two oppositely charged nozzles. Finaly their application for packed-in-tube solid-phase microextraction of β-blocker drugs from biofluids was demonstrated. The separation and quantification of analytes were performed by HPLC-UV instrument. The 3D-yarn PAN/MXene sorbent exhibited high flexibility, porosity, sorbent loading, mechanical stability, and a long lifetime. The characterization of the final nanofiber was carried out utilizing Fourier-transform infrared spectroscopy, field emission scanning electron microscope, energy-dispersive X-ray mapping, transmission electron microscope and X-ray diffraction analysis. Various parameters that affect the extraction efficiency, such as extraction time, pH, ionic strength and flow rate of sample solution, and type, volume and flow rate of eluent, were investigated and optimized. Under optimized conditions, the limits of detection were obtained in the range of 1.5-3.0 μg L-1. This method demonstrated appropriate linearity for β-blockers in the range of 5.0-1000.0 μg L-1, with coefficients of determination greater than 0.990. The inter- and intra-assay precisions (RSDs, for n = 3) are in the range of 2.5-3.5%, and 4.5-5.2%, respectively. Finally, the validated method was put in an application for the analysis of atenolol, propranolol and betaxolol in human urine and saliva samples at different hours and acceptable relative recoveries were obtained in the range of 89.5% to 110.4%.

MXene-Decorated Nylon Mesh Filters for Improvement of Indoor Air Quality by PM2.5 Filtration

Air pollution is a problem that is increasing day by day and poses a threat on a global scale. Particulate matter (PM) is one of the air pollutants that is the biggest concern regarding air quality. In order to control PM pollution, highly effective air filters are required. This is especially necessary for PM with a diameter of less than 2.5 micrometers (PM_2.5), which poses a health risk to humans. In this study, we demonstrate for the first time the use of a two-dimensional titanium carbide (Ti₃C₂) MXene nanosheets-decorated nylon mesh (MDNM) as a low cost and highly efficient PM_2.5 filter. This study develops a proof-of-concept method to capture PM_2.5. Thanks to their high specific surface area and active surface-terminating groups, conductive MXene nanosheets have made nylon mesh filters promising candidates for air filtration. The developed filters used electrostatic force to capture PM_2.5 and showed high removal efficiency (90.05%) when an ionizer was used and under an applied voltage of 10 V, while a commercial high-efficiency particulate air (HEPA) filter had a removal efficiency of 91.03% measured under identical conditions. The proposed filters, which stand out with their low energy consumption, low pressure drop (∼14 Pa), and cost-effectiveness, have the potential to be a strong competitor to conventional PM filter systems used in many fields.

Nanofibers in Respiratory Masks: An Alternative to Prevent Pathogen Transmission

Recent global outbreak of COVID-19 has raised serious awareness about our abilities to protect ourselves from hazardous pathogens and volatile organic compounds. Evidence suggests that personal protection equipment such as respiratory masks can radically decrease rates of transmission and infections due to contagious pathogens. To increase filtration efficiency without compromising breathability, application of nanofibers in production of respiratory masks have been proposed. The emergence of nanofibers in the industry has since introduced a next generation of respiratory masks that promises improved filtration efficiency and breathability via nanometric pores and thin fiber thickness. In addition, the surface of nanofibers can be functionalized and enhanced to capture specific particles. In addition to conventional techniques such as melt-blown, respiratory masks by nanofibers have provided an opportunity to prevent pathogen transmission. As the surge in global demand for respiratory masks increases, herein, we reviewed recent advancement of nanofibers as an alternative technique to be used in respiratory mask production.

Composite nanoarchitectonics with TiO2 nanocrystals and superior thin Ti3C2Tx nanosheets towards efficient NO removal

Accordion-like Ti₃C₂T_x MXene supplied a possibility to construct two-dimensional composites with novel performance. In this paper, few-layered Ti₃C₂T_x MXene was created via a chemical etching strategy. The oxidation in-situ using a powerful alkaline solution resulted successfully in TiO₂ nanocrystals grown on Ti₃C₂T_x nanosheets. The alkaline treatment adjusted terminations of the Ti₃C₂T_x MXene and controlled the oxidation degree by changing temperature. The ratio of Ti₃C₂T_x and TiO₂ was finally optimized. Because of Ti₃C₂T_x nanosheets with well conductivity and excellent light absorption as well as TiO₂ nanocrystal arrays on Ti₃C₂T_x nanosheets with a high specific surface area and more active sites, TiO₂/Ti₃C₂T_x composites revealed excellent photocatalystic activity, especially for NO removal. The improvement of separation and transfer efficiency of phootogenerated carriers is ascribed to the microstructure of TiO₂/Ti₃C₂T_x composites. The composite sample synthesized at 75 °C revealed the best NO removal efficiency, in which 70% of NO was removed at a concentration of 600 ppb. This study offers a new thought for preparing high performance MXene-based photocatalysts.

Enhanced Catalytic Effect of Ti2CTx-MXene on Thermal Decomposition Behavior of Ammonium Perchlorate

Transition metal carbonitrides (MXenes) are promising catalysts due to their special structures. Recently, many studies have shown that MXenes have a catalytic effect on the thermal decomposition of ammonium perchlorate (AP). However, the catalytic effects have not been extensively investigated. Therefore, it is important to illustrate the catalytic mechanisms of pure MXene in AP thermal decomposition. Herein, the catalytic properties of Ti₂CT_x for ammonium perchlorate (AP) thermal decomposition were investigated by numerous catalytic experiments. The results showed that the high-temperature decomposition (HTD) decreased by 83 °C, and the decomposition heat of AP mixed with Ti₂CT_x increased by 1897.3 J/g. Moreover, the mass spectrum (MS) data showed that the NH₃, H₂O, O₂, N₂O, NO, HCl, and NO₂ were formed. In addition, according to the X-ray diffraction (XRD), Raman spectrum, high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and X-ray photoelectron spectra (XPS) results, the Ti₂CT_x nanosheets can adsorb the gaseous products and react with them in-situ, generating anatase-TiO₂ and carbon layers. The Ti₂CT_x, as-resulted anatase-TiO₂, and carbon can synergize and further catalyze the thermal decomposition of AP when both electron and proton transfers are accelerated during AP decomposition.

Emergence of MXene and MXene-Polymer Hybrid Membranes as Future- Environmental Remediation Strategies

The continuous deterioration of the environment due to extensive industrialization and urbanization has raised the requirement to devise high-performance environmental remediation technologies. Membrane technologies, primarily based on conventional polymers, are the most commercialized air, water, solid, and radiation-based environmental remediation strategies. Low stability at high temperatures, swelling in organic contaminants, and poor selectivity are the fundamental issues associated with polymeric membranes restricting their scalable viability. Polymer-metal-carbides and nitrides (MXenes) hybrid membranes possess remarkable physicochemical attributes, including strong mechanical endurance, high mechanical flexibility, superior adsorptive behavior, and selective permeability, due to multi-interactions between polymers and MXene's surface functionalities. This review articulates the state-of-the-art MXene-polymer hybrid membranes, emphasizing its fabrication routes, enhanced physicochemical properties, and improved adsorptive behavior. It comprehensively summarizes the utilization of MXene-polymer hybrid membranes for environmental remediation applications, including water purification, desalination, ion-separation, gas separation and detection, containment adsorption, and electromagnetic and nuclear radiation shielding. Furthermore, the review highlights the associated bottlenecks of MXene-Polymer hybrid-membranes and its possible alternate solutions to meet industrial requirements. Discussed are opportunities and prospects related to MXene-polymer membrane to devise intelligent and next-generation environmental remediation strategies with the integration of modern age technologies of internet-of-things, artificial intelligence, machine-learning, 5G-communication and cloud-computing are elucidated.

Recent Advancement in Rational Design Modulation of MXene: A Voyage from Environmental Remediation to Energy Conversion and Storage

Use of MXenes (Ti₃ C₂ T_x ), which belongs to the family of two-dimensional transition metal nitrides and carbides by encompassing unique combination of metallic conductivity and hydrophilicity, is receiving tremendous attention, since its discovery as energy material in 2011. Owing to its precursor selective chemical etching, and unique intrinsic characteristics, the MXene surface properties are further classified into highly chemically active compound, which further produced different surface functional groups i. e., oxygen, fluorine or hydroxyl groups. However, the role of surface functional groups doesn't not only have a significant impact onto its electrochemical and hydrophilic characteristics (i. e., ion adsorption/diffusion), but also imparting a noteworthy effect onto its conductivity, work function, electronic structure and properties. Henceforth, such kind of inherent chemical nature, robust electrochemistry and high hydrophilicity ultimately increasing the MXene application as a most propitious material for overall environment-remediation, electrocatalytic sensors, energy conversion and storage application. Moreover, it is well documented that the role of MXenes in all kinds of research fields is still on a progress stage for their further improvement, which is not sufficiently summarized in literature till now. The present review article is intended to critically discuss the different chemical aptitudes and the diversity of MXenes and its derivates (i. e., hybrid composites) in all aforesaid application with special emphasis onto the improvement of its surface characteristics for the multidimensional application. However, this review article is anticipated to endorse MXenes and its derivates hybrid configuration, which is discussed in detail for emerging environmental decontamination, electrochemical use, and pollutant detection via electrocatalytic sensors, photocatalysis, along with membrane distillation and the adsorption application. Finally, it is expected, that this review article will open up new window for the effective use of MXene in a broad range of environmental remediation, energy conversion and storage application as a novel, robust, multidimensional and more proficient materials.

Application of 2D Materials for Adsorptive Removal of Air Pollutants

Air pollution is on the priority list of global safety issues, with the concern of fatal environmental and public health deterioration. 2D materials are potential adsorbent materials for environmental decontamination, owing to their high surface area, manageable interlayer binding, large surface-to-volume ratio, specific binding capability, and chemical, thermal, and mechanistic stability. Specifically, graphene oxide and reduced graphene oxide have been attracting attention, taking advantage of their low cost synthesis, excessive oxygen containing surface functionalities, and intrinsic aqueous dispersibility, making them desirable for the development of cost-effective, high performance air filters. Many different material designs have been proposed to expand their filtration capability, including the functionalization and integration with other metals and metal oxides, which act not only as binding agents to the target pollutants but also as antimicrobial agents. This review highlights the advantages and drawbacks of 2D materials for air filtration and summarizes the interrelationships among various strategies and the resultant filtration performance in terms of structural engineering, morphology control, and material compositions. Finally, potential future directions are suggested toward the idealized designs of 2D material based air filters.

An overview of MXene-Based nanomaterials and their potential applications towards hazardous pollutant adsorption

With the massive development of industrialization, multiple ecological contaminants in gaseous, liquid, and solid forms are vented into habitats, which is currently at the forefront of worldwide attention. Because of the possible damage to public health and eco-diversity, high-efficiency clearance of these environmental contaminants is a serious concern. Improved nanomaterials (NMs) could perform a significant part in the exclusion of contaminants from the atmosphere. MXenes, a class of two-dimensional (2D) compounds that have got tremendous consideration from researchers for a broad array of applications in a variety of industries and are viewed as a potential route for innovative solutions to identify and prevent a variety of obstreperous hazardous pollutants from environmental compartments due to their exceptional innate physicochemical and mechanical features, including high specific surface area, physiological interoperability, sturdy electrodynamics, and elevated wettability. This paper discusses the recent progress in MXene-based nanomaterials' applications such as environmental remediation, with a focus on their adsorption-reduction characteristics. The removal of heavy metals, dyes, and radionuclides by MXenes and MXene-based nanomaterials is depicted in detail, with the adsorption mechanism and regeneration potential highlighted. Finally, suggestions for future research are provided to ensure that MXenes and MXene-based nanomaterials are synthesized and applied more effectively.

Recent Advances in Oxidation Stable Chemistry of 2D MXenes

As an emerging star of 2D nanomaterials, 2D transition metal carbides and nitrides, named MXenes, present a large potential in various research areas owing to their intrinsic multilayer structure and intriguing physico-chemical properties. However, the fabrication and application of functional MXene-based devices still remain challenging as they are prone to oxidative degradation under ambient environment. Within this review, the preparation methods of MXenes focusing on the recent investigations on their thermal structure-stability relationships in inert, oxidizing, and aqueous environments are systematically introduced. Moreover, the key factors that affect the oxidation of MXenes, such as, atmosphere, temperature, composition, microstructure, and aqueous environment, are reviewed. Based on different scenarios, strategies for avoiding or delaying the oxidation of MXenes are proposed to encourage the utilization of MXenes in complicated environments, especially at high temperature. Furthermore, the chemistry of MXene-derived oxides is analyzed, which can offer perspectives on the further design and fabrication of novel 2D composites with the unique structures of MXenes being preserved.

High Performance Polycarbonate Nanocomposites Mechanically Boosted with Titanium Carbide in Material Extrusion Additive Manufacturing

Herein, a polycarbonate (PC) polymer is melt extruded together with titanium carbide (TiC) nano powder for the development of advanced nanocomposite materials in material extrusion (MEX) 3D printing. Raw material for the 3D printing process was prepared in filament form with a thermomechanical extrusion process and specimens were built to be tested according to international standards. A thorough mechanical characterization testing course (tensile, flexural, impact, microhardness, and dynamic mechanical analysis-DMA) was conducted on the 3D printed specimens. The effect of the ceramic filler loading was also investigated. The nanocomposites' thermal and stoichiometric properties were investigated with thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), energy-dispersive X-ray spectroscopy (EDS), and Raman respectively. The specimens' 3D printing morphology, quality, and fracture mechanism were investigated with atomic force microscopy (AFM) and scanning electron microscopy (SEM) respectively. The results depicted that the addition of the filler decidedly enhances the mechanical response of the virgin polymer, without compromising properties such as its processability or its thermal stability. The highest improvement of 41.9% was reported for the 2 wt.% filler loading, making the nanocomposite suitable for applications requiring a high mechanical response in 3D printing, in which the matrix material cannot meet the design requirements.

ZIF-8/PI Nanofibrous Membranes With High-Temperature Resistance for Highly Efficient PM0.3 Air Filtration and Oil-Water Separation

Air and water pollution poses a serious threat to public health and the ecological environment worldwide. Particulate matter (PM) is the major air pollutant, and its primary sources are processes that require high temperatures, such as fossil fuel combustion and vehicle exhaust. PM_0.3 can penetrate and seriously harm the bronchi of the lungs, but it is difficult to remove PM_0.3 due to its small size. Therefore, PM_0.3 air filters that are highly efficient and resistant to high temperatures must be developed. Polyimide (PI) is an excellent polymer with a high temperature resistance and a good mechanical property. Air filters made from PI nanofibers have a high PM removal efficiency and a low air flow resistance. Herein, zeolitic imidazolate framework-8 (ZIF-8) was used to modify PI nanofibers to fabricate air filters with a high specific surface area and filtration efficiency. Compared with traditional PI membranes, the ZIF-8/PI multifunction nanofiber membranes achieved super-high filtration efficiency for ultrafine particles (PM_0.3, 100%), and the pressure drop was only 63 Pa. The filtration mechanism of performance improvement caused by the introduction of ZIF-8/PI nanofiber membrane is explored. Moreover, the ZIF-8/PI nanofiber membranes exhibited excellent thermal stability (300 C) and efficient water–oil separation ability (99.85%).

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Preparation, filtration, and photocatalytic properties of PAN@g-C3N4 fibrous membranes by electrospinning

Particulate matter and formaldehyde (HCHO) in closed indoor environments are seriously harmful to human health; hence, techniques for the improvement of air quality have attracted significant attention. PAN@g-C₃N₄ fibrous membranes with high efficiency, low resistance, and photocatalytic activity were prepared by electrospinning with polyacrylonitrile (PAN) and graphite carbon nitride (g-C₃N₄), followed by the high-temperature polycondensation of melamine. The addition of g-C₃N₄ to the nanofibrous membrane effectively improved the filtration efficiency of PM2.5. When the amount of added g-C₃N₄ was 3 wt%, the filtration efficiency of PM2.5 was 99.76 ± 0.3%, the filtration efficiency was stable for 24 hours at a continuous high concentration, and the filtration cycle stability was good. As a photocatalytic material, g-C₃N₄ causes the photocatalytic degradation of HCHO, and thus, significantly improves the filtration efficiency of the nanofibrous membrane to HCHO. When the amount of added g-C₃N₄ was 3 wt%, the filtration efficiency of the nanofibrous membrane to HCHO reached 78.0 ± 1.8%. The mechanism of catalytic degradation showed that the PAN fibres first adsorbed and intercepted the HCHO molecules. Under simulated sunlight irradiation, the photogenerated holes generated by the g-C₃N₄ nanosheets in the fibres oxidised and decomposed the adsorbed HCHO molecules. This study has broad application potential for high-efficiency filters to improve indoor air quality.

Particulate matter and formaldehyde (HCHO) in closed indoor environments are seriously harmful to human health; hence, techniques for the improvement of air quality have attracted significant attention.

Electrospun Nanofiber Mats for Filtering Applications-Technology, Structure and Materials

Air pollution is one of the biggest health and environmental problems in the world and a huge threat to human health on a global scale. Due to the great impact of respiratory viral infections, chronic obstructive pulmonary disease, lung cancer, asthma, bronchitis, emphysema, lung disease, and heart disease, respiratory allergies are increasing significantly every year. Because of the special properties of electrospun nanofiber mats, e.g., large surface-to-volume ratio and low basis weight, uniform size, and nanoporous structure, nanofiber mats are the preferred choice for use in large-scale air filtration applications. In this review, we summarize the significant studies on electrospun nanofiber mats for filtration applications, present the electrospinning technology, show the structure and mechanism of air filtration. In addition, an overview of current air filtration materials derived from bio- and synthetic polymers and blends is provided. Apart from this, the use of biopolymers in filtration applications is still relatively new and this field is still under-researched. The application areas of air filtration materials are discussed here and future prospects are summarized in conclusion. In order to develop new effective filtration materials, it is necessary to understand the interaction between technology, materials, and filtration mechanisms, and this study was intended to contribute to this effort.

High performance, environmentally friendly and sustainable nanofiber membrane filter for removal of particulate matter 1.0

Particulate matter (PM) air pollution is becoming more and more serious and dangerous to public health, especially in developing countries where industrialization is accelerating. The use of electrospun membrane-based materials for air filtration is a widespread and effective way to help individuals avoid air pollution. However, most electrospun membrane preparation processes require the use of organic solvents, resulting in secondary environmental pollution. In this study, an environmentally friendly polyvinyl alcohol (PVA) - tannic acid (TA) composite nanofiber membrane filter was prepared by the green electrospinning and the physical cross-linking method. The filtration efficiency of the membrane filter for PM_1.0 reached 99.5%, and the pressure drop was only 35 Pa. In addition, due to the existence of intermolecular hydrogen bond between PVA and TA, the mechanical properties of the nanofiber membrane were improved to meet the requirements of practical application of the filter. Therefore, the PVA-TA composite nanofiber membrane is expected to provide a solution for the development of efficient and environmentally friendly air filter.

Laminated polyacrylonitrile nanofiber membrane codoped with boehmite nanoparticles for efficient electrostatic capture of particulate matters

Particulate matters (PMs) air pollution is identified as the major threat to public health and climate. High-performance air filter technology based on various electrospun nanofibers is considered as an effective strategy to eliminate the effects of PMs air pollution. However, to date, nearly all the existing micro-/nanofibers are hard to meet both requirements of high PMs removal efficiency and long service life. In this work, we reported the production of laminated polyacrylonitrile(PAN)-boehmite nanoparticles (BNPs) nanofiber structured membrane by the electrospinning process. The dimension of PAN-BNPs nanofiber can be tunable from (0.09 ± 0.03)μm to (0.81 ± 0.11)μm by controlling the PAN and BNPs concentrations in precursors. The optimized PAN-BNPs nanofiber air filter with a basis weight of 1 g m^-2demonstrates the attractive attributes of high PM_2.5removal efficiency up to 99.962% and low pressure drop of 58 Pa. Most importantly, after introducing the BNPs as electret, the removal efficiency is very stable under the air flow rate of 6 l min^-1. This PAN-BNPs nanofiber with a long electrostatic duration time offers an approach for fabricating future high-performance air filters.

Application of MXenes in environmental remediation technologies

MXenes have recently been recognized as potential materials based on their unique physical and chemical characteristics. The widely growing family of MXenes is rapidly expanding their application domains since their first usage as energy materials was reported in 2011. The inherent chemical nature, high hydrophilicity, and robust electrochemistry regard MXenes as a promising avenue for environment-remediation technologies such as adsorption, membrane separation, photocatalysis and the electrocatalytic sensor designed for pollutant detection. As the performance of MXenes in these technologies is on a continuous path to improvement, this review intends to cumulatively discuss the diversity and chemical abilities of MXenes and their hybrid composites in the fields mentioned above with a focus on MXenes improving surface-characteristics. The review is expected to promote the diversity of MXenes and their hybrid configuration for advanced technologies widely applied for environmental remediation.

High efficient dye removal with hydrolyzed ethanolamine-Polyacrylonitrile UF membrane: Rejection of anionic dye and selective adsorption of cationic dye

The dye-water treatment using UF membrane is still a challenge. In the present study, the optimized PAN-ETA ultrafiltration membrane was hydrolyzed and subsequently characterized by SEM, IR, CA, XPS, NMR, mechanic measurement, etc. The obtained membrane (H-PAN-ETA) was used for dye removal and it showed both an excellent anti-dye fouling and a good rejection property for anionic dyes. I.e. 96% rejection for methyl blue (MB), 99% for congo red (CR), 94% for acid fuchsin (AF) with no sign of contamination by dye. The flux of H-PAN-ETA membrane maintained at 50-53 L m^-2⋅ h^-1 during a 10-h filtration, which is higher than that of tight UF membranes reported. Meanwhile, H-PAN-ETA membrane was able to selectively remove cationic dyes, such as methylene blue (MEB), rhodamine B (RB) and, crystal violet (CV), or the mixture of anionic dye/cationic dye by adsorption process. Its adsorption capacity remained unchanged after 20 cycles. Finally, the immobile electrical double layer (EDL) theory combined with electrostatic force was introduced to explain the separation mechanism of charged UF membrane, which is helpful to instruct the preparation of UF membrane for dye removal.

Hybrid membrane with controllable surface microroughness by micro-nano structure processing for diluted PM2.5 capture

Tremendous efforts have been devoted by researchers on air particulate matter pollution for the increasing harm, however, the Air Pollution Index (API) from "good" to "excellent" is something hard to achieve. Here, halloysite nanotubes/polyvinyl alcohol (HNTs/PVA) hybrid membrane with surface micro-nano structure processing using a one-step method for efficient PM_2.5 capture was prepared. The filtration efficiency is 45.35% and the pressure drop is 41.57 Pa of composite membrane with a 60 wt% halloysite dosage. Specially, it resulted in a relatively safer PM index value of about 16.54, which tends to be more stringent than the restriction by Government of China (PM_2.5 < 35 μg/m³). The filtration performance was mainly attributed to the controllable microroughness surface as well as the hierarchical structure constructed by one-step method, which has a functional role in obstruction and adsorption for diluted PM_2.5. The methodology can employ halloysite onto various polymers, like polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), polyacrylonitrile (PAN) and also polycaprolactone (PCL) to yield hybrid membranes with the similar modification of surface and structure. Such versatile membrane filters can be purposely designed and scaled up, which endows the existing hybrid membrane with great potentials in both residential and public areas pollution control to achieve a healthier living environment.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Flexible and transparent composite nanofibre membrane that was fabricated via a "green" electrospinning method for efficient particulate matter 2.5 capture

Air particulate pollution from ever-increasing industrialization poses an enormous threat to public health. Thus, the development of a green air filter with high efficiency and performance is of urgent necessity. In this study, we introduce a new effective air filtration membrane that can be used for outdoor protection. The air filter's composite nanofibre materials were prepared from polyvinyl alcohol (PVA)-sodium lignosulfonate (LS) via a "green" electrospinning method and thermal crosslinking. The addition of LS helped increase the PM_2.5 removal efficiency compared to that of a pure PVA nanofibre membrane. The pressure drops of the electrospun PVA-LS membranes exceeded those of the pristine PVA air filter. The remarkable air filtration performance was maintained even after 10 cycles of circulation filtration. In addition, the PVA-LS composite nanofibre membrane exhibited excellent mechanical properties and transparency due to the introduction of LS. This study provides new insight into the design and development of high-performance and high-visibility green filter media, which include personal protection and building screens.

Face Masks in the New COVID-19 Normal: Materials, Testing, and Perspectives

The increasing prevalence of infectious diseases in recent decades has posed a serious threat to public health. Routes of transmission differ, but the respiratory droplet or airborne route has the greatest potential to disrupt social intercourse, while being amenable to prevention by the humble face mask. Different types of masks give different levels of protection to the user. The ongoing COVID-19 pandemic has even resulted in a global shortage of face masks and the raw materials that go into them, driving individuals to self-produce masks from household items. At the same time, research has been accelerated towards improving the quality and performance of face masks, e.g., by introducing properties such as antimicrobial activity and superhydrophobicity. This review will cover mask-wearing from the public health perspective, the technical details of commercial and home-made masks, and recent advances in mask engineering, disinfection, and materials and discuss the sustainability of mask-wearing and mask production into the future.

Fabrication and performance of a stable micro/nano composite electret filter for effective PM2.5 capture

Airborne particulate matter (PM) pollution has raised serious concerns over both the global climate and public health. Therefore, there is an urgent need for air filters of high-efficiency and energy-saving. Pore structure optimization and electret enhancement are feasible means to improve their filtration performance. Herein, a novel sandwich-structured electret composite filter with a low pressure drop and robust filtration stability was successfully designed and fabricated. The composite filter was composed of fluffy PS microfibers with large electric resistivity and high porosity, and PAN nanofibers with high polarity and small pore size. Benefiting from the fluffy structure constructed by electrospinning at the right humidity, the tortuous pore channels created by the appropriate mixing of microfibers and nanofibers, and the abundant static charges generated by the hybrid of polar and nonpolar polymer materials, the PS/PAN/PS composite filter possessed a high filtration efficiency of 99.96% for particles of 0.30 μm, a low pressure drop of 54 Pa and a satisfactory quality factor value of 0.1449 Pa^-1 at an airflow velocity of 5.3 cm/s. In particular, the composite filter exhibited better electret stability and PM_2.5 loading performance than the commercial ones, which guarantees its long-term storage and usage.