Preparation of molecular selective GO/DTiO2-PDA-PEI composite nanofiltration membrane for highly pure dye separation

Simple and rapid determination of 3-monochloropropane-1,2-diol in food contact papers based on polydopamine-polyethyleneimine copolymerization

The aim of this work was to develop a fluorescence method based on the polydopamine-polyethyleneimine (PDA-PEI) copolymerization, which was subsequently applied for the determination of 3-monochloropropane-1,2-diol (3-MCPD) in food contact papers (FCMs). PEI could provide an alkaline environment and then react with dopamine (DA) to produce copolymers by Michael addition and Schiff-base reactions. This copolymer has a strong fluorescence emission at 527 nm. We found that amino groups of DA and PEI could also react with 3-MCPD in an alkaline medium, which improved the morphology and fluorescence intensity of PDA-PEI copolymers. The fluorescence intensity of the polymers was linear but inversely proportional to the concentration of 3-MCPD in the range of 10.0-500.0 μg kg-1 and the detection limit was 2 μg kg-1. The standard addition method was used in FCMs to demonstrate the practical applicability and the spiked recoveries ranged from 99.8 to 110.3 %. Finally, the levels of 3-MCPD in different FCMs (n = 70) were determined by the proposed method. The detection frequencies ranged from 25 % to 100 % and both the highest detection frequency and levels were observed in kitchen papers. More than half of the samples did not comply with the limits recommended by the German Federal Institute for Risk Assessment, suggesting that 3-MCPD released from FCMs is a major route of human exposure.

Hollow Biomass Adsorbent Derived from Platanus Officinalis Grafted with Polydopamine-Mediated Polyethyleneimine for the Removal of Eriochrome Black T from Water

Platanus officinalis fibers (PFs) taking advantage of high-availability, eco-friendly and low-cost characteristics have attracted significant focus in the field of biomaterial application. Polyethyleneimine grafted with polydopamine on magnetic Platanus officinalis fibers (PEI-PDA@M-PFs) were prepared through a two-step process of mussel inspiration and the Michael addition reaction, which can work as an effective multifunctional biomass adsorbent for anionic dye with outstanding separation capacity and efficiency. The as-prepared PEI-PDA@M-PFs possess desirable hydrophilicity, magnetism and positive charge, along with abundant amino functional groups on the surface, facilitating efficient adsorption and the removal of Eriochrome Black T (EBT) dyes from water. In addition to the formation mechanism, the adsorption properties, including adsorption isotherms, kinetics, and the reusability of the absorbent, were studied intensively. The as-prepared PEI-PDA@M-PFs achieved a theoretical maximum adsorption capacity of 166.11 mg/g under optimal conditions (pH 7.0), with 10 mg of the adsorbent introduced into the EBT solution. The pseudo-second-order kinetic and Langmuir models were well matched with experimental data. Moreover, thermodynamic data ΔH > 0 revealed homogeneous chemical adsorption with a heat-absorption reaction. The adsorbent remained at high stability and recyclability even after five cycles of EBT adsorption processes. These above findings provide new insights into the adsorption processes and the development of biologic material for sustainable applications.

Tannin-assisted interfacial polymerization towards COF membranes for efficient dye separation

Membrane separation has been shown to have significant potential in addressing the global shortage of clean water. Covalent organic frameworks (COFs) have gained significant attention in the field of membrane separation due to their structural stability and controllable pore size. Here, a modification of polyethersulfone ultrafiltration membranes with TA-assisted COFs is prepared by interfacial polymerization and co-deposition. Intriguingly, in comparison to the conventional COF synthesis method, the interfacial polymerization reaction used n-butanol as the oil-phase monomer to prevent substrate corrosion. More importantly, the TA-assisted co-deposition not only introduces a large number of environmentally friendly hydrophilic groups to enhance the hydrophilicity of the membrane surface, but also the phenolic hydroxyl group contained in TA generates a quinone group upon oxidation. This group can undergo a Michael addition reaction with the amine group, followed by interfacial polymerization to regulate the COFs pore size. Consequently, the optimized membrane exhibited a high permeation flux of 122.03 L m-2 h-1 bar-1 without altering the pore size structure of the original membranes and demonstrated separation performance for various dyes (Mw: 300-1300 g mol-1), with a retention rate of over 98%. Despite multiple filtrations of methyl blue dye, the membrane prepared by simple rinsing still exhibited high retention rates (>98%) with exceptional stability and retention performance. The optimized membrane demonstrated good hydrophilicity and dye separation performance, indicated promising potential for dye separation applications.

Effective separation of dyes/salts by sulfonated covalent organic framework membranes based on phenolamine network conditioning

This study developed a modified polyacrylonitrile (PAN) membrane controlled by a phenol-amine network and enhanced with a sulfonated covalent organic framework (SCOF), aimed at improving the efficiency of textile wastewater treatment. Utilizing a phenol-amine network control strategy allows for precise manipulation of interfacial reactions in the synthesis of SCOF, achieving highly uniform modification on the surface of the PAN membrane. This modified membrane demonstrated high rejection of over 98% for various water-soluble dyes, including Alcian blue 8GX, Coomassie Brilliant Blue G250, methyl blue, congo red, and rose bengal, and also exhibited specific selectivity in processing salt-containing wastewater. By adjusting the deposition time of the phenol-amine and the concentration of SCOF monomers, optimal retention performance and permeate flux were achieved, effectively separating dyes and salts. This research provides a new and effective solution for treating textile wastewater, especially in separating and recovering dyes and salts, offering broad application prospects in environmental management and water resource management, and highlighting its significant practical implications.

Simultaneous Regulation of Surface Properties and Microstructure of Graphene Oxide Membranes for Enhanced Nanofiltration Performance

The surface properties and microstructure of graphene oxide (GO)-based membranes are both crucial for enhanced nanofiltration performance. Herein, a GO nanofiltration membrane is fabricated with regulatable surface properties and microstructure via a facile two-step impregnation in KOH and following HCl aqueous solutions. The type and number of oxygen-containing groups in GO membranes change with fewer C-O-C/C-OH and C═O but more COOH groups, and they are readily regulated by alkaline treatment time, which enables enhanced surface hydrophilicity and larger surface ζ potentials. Meanwhile, a few tiny defects are present in the GO sheets, which could increase the number of pores and decrease the length of water nanochannels. Such surface properties and microstructure together determine the excellent nanofiltration performance of the GO membranes with fast and selective water permeation, e.g., ∼99.5% rejection toward CBB G250 and flux of 56.9 ± 1.0 L m-2 h-1. This work provides insights into the design of high-performance two-dimensional laminar membranes.

ZnO/PDA/Mesoporous Cellular Foam Functionalized Thin-Film Nanocomposite Membrane towards Enhanced Nanofiltration Performance

Thin-film nanocomposite (TFN) membranes are the third-generation membranes being explored for nanofiltration applications. Incorporating nanofillers in the dense selective polyamide (PA) layer improves the permeability-selectivity trade-off. The mesoporous cellular foam composite Zn-PDA-MCF-5 was used as a hydrophilic filler in this study to prepare TFN membranes. Incorporating the nanomaterial onto the TFN-2 membrane resulted in a decrease in the water contact angle and suppression of the membrane surface roughness. The pure water permeability of 6.40 LMH bar^-1 at the optimal loading ratio of 0.25 wt.% obtained was higher than the TFN-0 (4.20 LMH bar^-1). The optimal TFN-2 demonstrated a high rejection of small-sized organics (>95% rejection for 2,4-dichlorophenol over five cycles) and salts-Na₂SO₄ (≈95%) > MgCl₂ (≈88%) > NaCl (86%) through size sieving and Donnan exclusion mechanisms. Furthermore, the flux recovery ratio for TFN-2 increased from 78.9 to 94.2% when challenged with a model protein foulant (bovine serum albumin), indicating improved anti-fouling abilities. Overall, these findings provided a concrete step forward in fabricating TFN membranes that are highly suitable for wastewater treatment and desalination applications.

Interfacial Polymerization on Polyethersulfone Ultrafiltration Membrane to Prepare Nanofiltration Layers for Dye Separation

Nanofiltration membranes are of great significance to the treatment of dye wastewater. Interfacial polymerization is a widely used method to fabricate nanofiltration membranes. In this study, the interaction of tannic acid-assisted polyethylene polyamine (PEPA) with terephthalaldehyde (TPAL) was performed on PES ultrafiltration membranes using novel nitrogen-rich amine monomers and relatively less reactive aldehyde-based monomers. A new nanofiltration membrane ((T-P-T)/PES) was prepared by interfacial polymerization. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy were used to analyze the elemental composition, bonding state, and surface morphology of the membrane surface. The effects of the PEPA deposition time, TPAL concentration, interfacial reaction time, and curing time on the nanofiltration layer were investigated. The modified membrane, prepared under optimal conditions, showed strong dye separation ability. The permeation of the modified membrane could reach 68.68 L·m^-2·h^-1·bar^-1, and the rejection of various dyes was above 99%. In addition, the (T-P-T)/PES membrane showed good stability during long-term dye separation.

A critical review on graphene oxide membrane for industrial wastewater treatment

An important way to promote the environmental industry's goal of carbon reduction is to promote the recycling of resources. Membrane separation technology has unique advantages in resource recovery and advanced treatment of industrial wastewater. However, the great promise of traditional organic membrane is hampered by challenges associated with organic solvent tolerance, lack of oxidation resistance, and serious membrane fouling control. Moreover, the high concentrations of organic matter and inorganic salts in the membrane filtration concentrate also hinder the wider application of the membrane separation technology. The emerging cost-effective graphene oxide (GO)-based membrane with excellent resistance to organic solvents and oxidants, more hydrophilicity, lower membrane fouling, better separation performance has been expected to contribute more in industrial wastewater treatment. Herein, we provide comprehensive insights into the preparation and characteristic of GO membranes, as well as current research status and problems related to its future application in industrial wastewater treatment. Finally, concluding remarks and future perspectives have been deduced and recommended for the GO membrane separation technology application for industrial wastewater treatment, which leads to realizing sustainable wastewater recycling and a nearly "zero discharge" water treatment process.

Membranes Coated with Graphene-Based Materials: A Review

Graphene is a popular material with outstanding properties due to its single layer. Graphene and its oxide have been put to the test as nano-sized building components for separation membranes with distinctive structures and adjustable physicochemical attributes. Graphene-based membranes have exhibited excellent water and gas purification abilities, which have garnered the spotlight over the past decade. This work aims to examine the most recent science and engineering cutting-edge advances of graphene-based membranes in regard to design, production and use. Additional effort will be directed towards the breakthroughs in synthesizing graphene and its composites to create various forms of membranes, such as nanoporous layers, laminates and graphene-based compounds. Their efficiency in separating and decontaminating water via different techniques such as cross-linking, layer by layer and coating will also be explored. This review intends to offer comprehensive, up-to-date information that will be useful to scientists of multiple disciplines interested in graphene-based membranes.

Ganzoury M, Zhang N, de Lannoy CF. Nanocomposite Polymeric Membranes for Organic Micropollutant Removal: A Critical Review

The prevalence of organic micropollutants (OMPs) and their persistence in water supplies have raised serious concerns for drinking water safety and public health. Conventional water treatment technologies, including adsorption and biological treatment, are known to be insufficient in treating OMPs and have demonstrated poor selectivity toward a wide range of OMPs. Pressure-driven membrane filtration has the potential to remove many OMPs detected in water with high selectivity as a membrane's molecular weight cutoff (MWCO), surface charge, and hydrophilicity can be easily tailored to a targeted OMP's size, charge and octanol-water partition coefficient (Kow). Over the past 10 years, polymeric (nano)composite microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) membranes have been extensively synthesized and studied for their ability to remove OMPs. This review discusses the fate and transport of emerging OMPs in water, an assessment of conventional membrane-based technologies (NF, reverse osmosis (RO), forward osmosis (FO), membrane distillation (MD) and UF membrane-based hybrid processes) for their removal, and a comparison to the state-of-the-art nanoenabled membranes with enhanced selectivity toward specific OMPs in water. Nanoenabled membranes for OMP treatment are further discussed with respect to their permeabilities, enhanced properties, limitations, and future improvements.

A high stability GO nanofiltration membrane preparation by co-deposition and crosslinking polydopamine for rejecting dyes

In order to improve the stability of nanofiltration membrane in separation and purification, a novel polyelectrolyte multilayer nanofiltration membrane was facilely prepared by co-deposition of polydopamine (PDA) and polyethyleneimine (PEI) on the polyethersulfone (PES) ultrafiltration membrane substrate, followed by immersing graphene oxide (GO) solution, and crosslinking PDA. The modified surfaces were characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM), water contact angle, their saline flux and ability to reject salt and dye were determined. The results also exhibited salt rejection ability as Na₂SO₄ > K₂SO₄ > MgSO₄ > NaCl > KCl > MgCl₂, suggesting the higher rejection of divalent anion. Also, the retention order of the dye by the GO modified membrane is DY86 > DB19 > AG27 > DY142 > DB56 > AR151 > VB5, indicating that the GO modified membrane has better rejection of negatively charged dyes as well as higher molecular weight dyes. Ethanol and hypochlorite resistance tests under different pH conditions showed the membranes coated GO enhanced stability in regard to salt rejection properties. Significantly, the anti-biological test confirmed the growth rate of microalgae on the GO introduced membrane was decreased greatly due to enhanced stability and lower roughness.

D-spacing controllable GO membrane intercalated by sodium tetraborate pentahydrate for dye contamination wastewater treatment

Sodium tetraborate pentahydrate (STB) was intercalated into graphene oxide (GO) nanosheets to form a nanocomposite (STB@GO). Subsequently, it was self-assembled on a substrate membrane to prepare STB@GO nanofiltration membrane. The properties of the STB@GO powder samples and the nanofiltration membrane were studied using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), contact angle (CA), and zeta potential. When the STB concentration was 1.0 g/L in the cross-linking reaction, the membrane was described as the STB₂@GO membrane and exhibited a large interlayer space (d-spacing = 1.347 nm), high hydrophilicity (CA = 22.2°), and high negative potential (zeta = -18.0 mV). Meanwhile, the pure water flux of the membrane was significantly increased by 56.60% than that of the GO membrane. In addition, the STB₂@GO membrane exhibited a favorable capability for dye rejection,98.52% for Evans blue (EB), 99.26% for Victoria blue B (VB), 91.94% for Alizarin yellow (AY), and 93.21% for Neutral red (NR). Furthermore, the STB₂@GO membrane performed better in dye separation under various types and concentrations of dye, pH values, and ions in solution. Thus, this study provides a promising method for preparing laminated GO nanofiltration membranes for dye wastewater treatment.

Highly stable graphene oxide composite nanofiltration membrane

Graphene oxide (GO) based membranes are promising for advanced nanofiltration in water treatments but there is a need to improve water flux and membrane stability. Although the interlayer distance of GO membranes can be expanded using intercalants to improve permeability, achieving uniform intercalation without the added complication of water-induced swelling is challenging. Herein, we report the fabrication of GO hybrid lamellar membranes with controllable layer structures to achieve high performance in nanofiltration. The interlayer spacing of the GO hybrid membrane is regulated using TiO₂ intercalants of different sizes, while the stability of GO membranes is enhanced by encapsulating with polyethyleneimine (PEI). The optimal composite membrane delivers a pure water-flux up to 26.0 L m^-2 h^-1 bar^-1 with a 99.9% rejection of methylene blue and eosin under an ultra-low pressure nanofiltration condition. More importantly, the composite membrane sustains good cycling stability after 5 filtration cycles of dye, which enables the potential industrial application in realizing ultra-stable GO based membranes.

Positively charged nanofiltration membrane synthesis, transport models, and lanthanides separation

The design and understanding of rejection mechanisms for both positively and negatively charged nanofiltration (NF) membranes are needed for the development of highly selective separation of multivalent ions. In this study, positively charged nanofiltration membranes were created via an addition of commercially available polyallylamine hydrochloride (PAH) by conventional interfacial polymerization technique. Demonstration of real increase in surface zeta potential, along with other characterization methods, confirmed the addition of weak basic functional groups from PAH. Both positively and negatively charged NF membranes were tested for evaluating their potential as a technology for the recovery or separation of lanthanide cations (neodymium and lanthanum chloride as model salts) from aqueous sources. Particularly, the NF membranes with added PAH performed high and stable lanthanides retentions, with values around 99.3% in mixtures with high ionic strength (100 mM, equivalent to ~6,000 ppm), 99.3% rejection at 85% water recovery (and high Na+/La3+ selectivity, with 0% Na+ rejection starting at 65% recovery), and both constant lanthanum rejection and permeate flux at even pH 2.7. Donnan steric pore model with dielectric exclusion elucidated the transport mechanism of lanthanides and sodium, proving the potential of high selective separation at low permeate fluxes using positively charged NF membranes.

Nanocomposite Membranes for Liquid and Gas Separations from the Perspective of Nanostructure Dimensions

One of the critical aspects in the design of nanocomposite membrane is the selection of a well-matched pair of nanomaterials and a polymer matrix that suits their intended application. By making use of the fascinating flexibility of nanoscale materials, the functionalities of the resultant nanocomposite membranes can be tailored. The unique features demonstrated by nanomaterials are closely related to their dimensions, hence a greater attention is deserved for this critical aspect. Recognizing the impressive research efforts devoted to fine-tuning the nanocomposite membranes for a broad range of applications including gas and liquid separation, this review intends to discuss the selection criteria of nanostructured materials from the perspective of their dimensions for the production of high-performing nanocomposite membranes. Based on their dimension classifications, an overview of the characteristics of nanomaterials used for the development of nanocomposite membranes is presented. The advantages and roles of these nanomaterials in advancing the performance of the resultant nanocomposite membranes for gas and liquid separation are reviewed. By highlighting the importance of dimensions of nanomaterials that account for their intriguing structural and physical properties, the potential of these nanomaterials in the development of nanocomposite membranes can be fully harnessed.