Fire-resistant, high-performance gel polymer electrolytes derived from poly(ionic liquid)/P(VDF-HFP) composite membranes for lithium ion batteries

Recent Advancements in Gel Polymer Electrolytes for Flexible Energy Storage Applications

Since the last decade, the need for deformable electronics exponentially increased, requiring adaptive energy storage systems, especially batteries and supercapacitors. Thus, the conception and elaboration of new deformable electrolytes becomes more crucial than ever. Among diverse materials, gel polymer electrolytes (hydrogels, organogels, and ionogels) remain the most studied thanks to the ability to tune the physicochemical and mechanical properties by changing the nature of the precursors, the type of interactions, and the formulation. Nevertheless, the exploitation of this category of electrolyte as a possible commercial product is still restrained, due to different issues related to the nature of the gels (ionic conductivity, evaporation of filling solvent, toxicity, etc.). Therefore, this review aims to resume different strategies to tailor the properties of the gel polymer electrolytes as well as to provide recent advancements in the field toward the elaboration of deformable batteries and supercapacitors.

Highly Stretchable Polyurethane Porous Membranes with Adjustable Morphology for Advanced Lithium Metal Batteries

A highly flexible, tunable morphology membrane with excellent thermal stability and ionic conductivity can endow lithium metal batteries with high power density and reduced dendrite growth. Herein, a porous Polyurethane (PU) membrane with an adjustable morphology was prepared by a simple nonsolvent-induced phase separation technique. The precise control of the final morphology of PU membranes can be achieved through appropriate selection of a nonsolvent, resulting a range of pore structures that vary from finger-like voids to sponge-like pores. The implementation of combinatorial DFT and experimental analysis has revealed that spongy PU porous membranes, especially PU-EtOH, show superior electrolyte wettability (472%), high porosity (75%), good mechanical flexibility, robust thermal dimensional stability (above 170 °C), and elevated ionic conductivity (1.38 mS cm-1) in comparison to the polypropylene (PP) separator. The use of PU-EtOH in Li//Li symmetric cell results in a prolonged lifespan of 800 h, surpasing the longevity of PU or PP cells. Moreover, when subjected to a high rate of 5 C, the LiFePO4/Li half-cell with a PU-EtOH porous membrane displayed better cycling performance (115.4 mAh g-1) compared to the PP separator (104.4 mAh g-1). Finally, the prepared PU porous membrane exhibits significant potential for improving the efficiency and safety of LMBs.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

A multifunctional and sustainable poly(ionic liquid)-quaternized chitosan hydrogel with thermal-triggered reversible adhesion

A quaternized chitosan (QCS)@poly(ionic liquid) (PIL) hydrogel adhesive was prepared by in-situ ultraviolet (UV)-induced copolymerization of 1-vinyl-3-butyl imidazolium bromide ([BVIm][Br]) and methacryloyloxyethyl trimethylammonium chloride (DMC) in QCS aqueous solution without using any crosslinkers, which was stably crosslinked by reversible hydrogen bonding together with ion association and exhibited excellent adhesion, plasticity, conductivity and recyclability properties. Moreover, its thermal/pH-responsive behaviors and intermolecular interaction mechanism of thermal-triggered reversible adhesion were discovered, meanwhile good biocompatibility, antibacterial properties, repeated stickiness and degradability were also proved. The results showed that the newly developed hydrogel could make various tissues, organic, inorganic or metal materials adhered tightly within 1 min; after 10 binding-peeling cycles, the adhesive strength to glass, plastic, aluminum and porcine skin still remained beyond 96 %, 98 %, 92 % and 71 % of the original, respectively. The adhesion mechanism involves ion dipole interaction, electrostatic interaction, hydrophobic interaction, coordination, cation-π interaction, H-bonding and van der Waals force. For above merits, the new tricomponent hydrogel is expected to be applied in biomedical field to achieve adjustable adhesion and on-demand peeling.

CTAB assisted evaporation-induced self-assembly to construct imidazolium-based hierarchical porous covalent organic polymers for ReO4-/TcO4- removal

Evaporation-induced self-assembly method (EISA) was a facile and reliable method to synthesize porous materials. Herein, we report a kind of hierarchical porous ionic liquid covalent organic polymers (HPnDNH₂) under cetyltrimethylammonium bromide (CTAB) assisted by EISA for ReO₄^-/TcO₄^- removal. Unlike covalent organic frameworks (COFs), which usually needed to be prepared in a closed environment or with a long reaction time, HPnDNH₂ in this study was prepared within 1 h in an open environment. It was worth noting that CTAB not only served as a soft template for forming pore, but also induced ordered structure, which was verified by SEM, TEM, and Gas sorption. Benefit from its hierarchical pore structure, HPnDNH₂ exhibited higher adsorption capacity (690.0 mg g^-1 for HP1DNH₂ and 808.7 mg g^-1 for HP1.5DNH₂) and faster kinetics for ReO₄^-/TcO₄^- than 1DNH₂ (without employing CTAB). Additionally, the material used to remove TcO₄^- from alkaline nuclear waste was seldom reported, because combining features of alkali resistance and high uptake selectivity was not easy to achieve. In this study, in the case of HP1DNH₂, it displayed outstanding adsorption efficiency toward aqueous ReO₄^-/TcO₄^- in 1 mol L^-1 NaOH solution (92%) and simulated Savannah River Site High-level waste (SRS HLW) melter recycle stream (98%), which could be a potentially excellent nuclear waste adsorbing material.

High-Ionic-Conductivity Sodium-Based Ionic Gel Polymer Electrolyte for High-Performance and Ultrastable Microsupercapacitors

Due to the lower cost and greater natural abundance of the sodium element on the earth than those of the lithium element, sodium-based ionic gel polymer electrolytes (IGPEs) are becoming a more cost-effective and popular material choice for portable and stationary energy solutions. The sodium-based IGPEs, however, appeared relatively inferior to their lithium-based counterparts for use in high-performance microsupercapacitors in terms of ionic conductivity and electrochemical stability. To tackle these issues, poly(ethylene glycol) diacrylate (PEGDA) with fast polymerization to build a polymer matrix and sodium perchlorate (NaClO₄) with high chemical stability and high thermal stability are employed to generate free ions for an ionic conducting phase with the support of tetramethylene glycol ether (G4) and 1-ethyl-3-methylimidazolium bis(triflouromethylsulfonyl)imide (EMIM-TFSI). It was found that the ionic conductivity (σ_dc) of this sodium-based IGPE reaches up to 0.54 mS/cm at room temperature. To manifest a high-conductivity sodium-based IGPE (SIGPE), a microsupercapacitor (MSC) with an area of 5 mm² is designed and fabricated on an interdigital reduced graphene oxide electrode. This MSC demonstrates prominent performance with a high power density of ∼2500 W/kg and a maximum energy density of ∼0.7 Wh/kg. Furthermore, after 20,000 cycles at an operating potential window from 0.0 to 1.0 V, it retains approximately 98.9% capacitance. An MSC array in 3 series × 3 parallels (3S × 3P) was successfully designed as a power source for a basic circuit with an LED. Therefore, we believe that our sodium-based IGPE microsupercapacitor holds its promising role as a solid-state energy source for high-performance and high-stability energy solutions.

High-Performance and Highly Safe Solvate Ionic Liquid-Based Gel Polymer Electrolyte by Rapid UV-Curing for Lithium-Ion Batteries

Utilizing ionic liquids (ILs) with low flammability as the precursor component for a gel polymer electrolyte is a smart strategy out of safety concerns. Solvate ionic liquids (SILs) consist of equimolar lithium bis(trifluoromethylsulfonyl)imide and tetraglyme, alleviating the main problems of high viscosity and low Li⁺ conductivity of conventional ILs. In this study, within a very short time of 30 s, a SIL turns immobile using efficient and controllable UV-curing with an ethoxylated trimethylolpropane triacrylate (ETPTA) network, forming a homogeneous SIL-based gel polymer electrolyte (SGPE) with enhanced thermal stability (216 °C), robust mechanical strength (compression modulus: 1.701 MPa), and high ionic conductivity (0.63 mS cm^-1 at room temperature). A Li|SGPE|LiFePO₄ cell demonstrates high charge/discharge reversibility and cycling stability with a capacity retention rate of 99.7% after 750 cycles and an average Coulombic efficiency of 99.7%, owing to its excellent electrochemical compatibility with Li-metal. A close-contact electrode/electrolyte interface is formed by in situ curing of the electrolyte on the electrode surface, which enables the pouch full cell to work stably under the conditions of cutting/bending. In view of the excellent mechanical, thermal, and electrochemical performances of SGPE, it is believed to be a promising gel polymer electrolyte for constructing high-safety lithium-ion batteries (LIBs).

Double-layer Composite Gel Polymer Electrolyte for Organic Sodium-metal Batteries

Organic cathode materials have the advantages of abundant raw materials, high theoretical specific capacity, controllable structure and easy recycling. Pyrene-4,5,9,10-tetraone (PTO), as one of the typical organic cathode materials, achieves efficient storage and release of Na + . However, its good solubility in traditional organic liquid electrolytes is detrimental to the cyclic stability of batteries. To address this issue, the double-layer composite gel polymer electrolyte (DLCGPE) consisting of poly (ionic liquid) gel polymer electrolyte and plastic crystal electrolyte was developed and applied to organic sodium-metal batteries. This as-prepared DLCGPE displays an ionic conductivity of 2.17×10 -4 S cm -1 and an electrochemical window of 4.8 V. The as-fabricated sodium-symmetric batteries maintain interfacial stability after 500 h of cycling. Furthermore, the PTO/Na batteries could also retain a specific capacity of 201 mAh g -1 after 300 cycles, confirming that DLCGPE achieves the purpose of inhibiting PTO dissolution and maintaining batteries stability. This work broadens the application of asymmetric electrolytes in organic secondary battery.

Ionic Liquid-Based Gels for Applications in Electrochemical Energy Storage and Conversion Devices: A Review of Recent Progress and Future Prospects

Ionic liquids (ILs) are molten salts that are entirely composed of ions and have melting temperatures below 100 °C. When immobilized in polymeric matrices by sol-gel or chemical polymerization, they generate gels known as ion gels, ionogels, ionic gels, and so on, which may be used for a variety of electrochemical applications. One of the most significant research domains for IL-based gels is the energy industry, notably for energy storage and conversion devices, due to rising demand for clean, sustainable, and greener energy. Due to characteristics such as nonvolatility, high thermal stability, and strong ionic conductivity, IL-based gels appear to meet the stringent demands/criteria of these diverse application domains. This article focuses on the synthesis pathways of IL-based gel polymer electrolytes/organic gel electrolytes and their applications in batteries (Li-ion and beyond), fuel cells, and supercapacitors. Furthermore, the limitations and future possibilities of IL-based gels in the aforementioned application domains are discussed to support the speedy evolution of these materials in the appropriate applicable sectors.

Effects of Comonomers on the Performance of Stable Phosphonate-Based Gel Terpolymer Electrolytes for Sodium-Ion Batteries with Ultralong Cycling Stability

Gel polymer electrolyte (GPE) is one of the most promising alternatives to solve the bottlenecks of nonaqueous liquid electrolytes such as decomposition, safety hazards, and growth of dendrites. In this work, three novel methyl phosphonate-based crosslinking gel terpolymer electrolytes with different comonomers are designed and prepared by in situ radical polymerization. The gel polymer electrolytes have excellent thermal stability, wide electrochemical windows (≥4.9 V), and high ionic conductivities (±3 mS cm^-1), and may be used as less-flammable electrolytes for sodium-ion batteries. ³¹P NMR spectra, Arrhenius plot, and density functional theory (DFT) calculations confirm that multifunctional phosphonate structural units promote the dissociation of NaClO₄ and help to transport the sodium ions freely in the polymer framework. X-ray photoelectron spectroscopy (XPS) results show that the gel polymer electrolytes have the capability of inhibiting liquid electrolyte decomposition and the formation of the stable solid electrolyte interphase (SEI) film. The Na₃V₂(PO₄)₃/GPE/Na cells exhibit better ultralong cycling stability and enhanced temperature performance than those of liquid cells. Strikingly, GPE1 has the best comprehensive electrochemical performance, especially the rate performance and long-term cycling stability with a capacity retention ratio of 82.6% after 3500 cycles, which indicates that different comonomers have obvious effects on the performance. Therefore, the full cell of SnS₂/GPE1/Na₃V₂(PO₄)₃ is evaluated and delivers good cycling stability of 500 cycles, holding a great prospect for the design and production of phosphorus-containing electrolytes for safer sodium-ion batteries.

Nonporous Gel Electrolytes Enable Long Cycling at High Current Density for Lithium-Metal Anodes

Lithium-metal anodes with high theoretical capacity and ultralow redox potential are regarded as a "holy grail" of the next-generation energy-storage industry. Nevertheless, Li inevitably reacts with conventional liquid electrolytes, resulting in uneven electrodeposition, unstable solid electrolyte interphase, and Li dendrite formation that all together lead to a decrease in active lithium, poor battery performance, and catastrophic safety hazards. Here, we report a unique nonporous gel polymer electrolyte (NP-GPE) with a uniform and dense structure, exhibiting an excellent combination of mechanical strength, thermal stability, and high ionic conductivity. The nonporous structure contributed to a uniform distribution of lithium ions for dendrite-free lithium deposition, and Li/NP-GPE/Li symmetric cells can maintain an extremely low and stable polarization after cycling at a high current density of 10 mA cm^-2. This work provides an insight that the NP-GPE can be considered as a candidate for practical applications for lithium-metal anodes.

Decoupling of Mechanical Strength and Ionic Conductivity in Zwitterionic Elastomer Gel Electrolyte toward Safe Batteries

Quasi-solid state electrolyte is one of the promising options for next generation batteries due to its superiority on safety and electrochemistry performance. However, the trade-off between the electrolyte swelling ratio and mechanical property of the quasi-solid state electrolyte significantly influences the battery performance. Herein, we design a nonswelling, solvent-adaptive polymer gel composed of oleophobic zwitterion poly(3-(1-vinyl-3-imidazolio)-propanesulfonate) and oleophilic elastomer poly(2-methoxyethyl acrylate) segments to retain high battery performance without sacrificing the mechanical property in lithium batteries. The as-designed gel can not only uptake enough electrolyte for a high ionic conductivity of 1.78 mS cm^-1 but also achieve excellent mechanical strength with compression stress at 90% strain (σ_0.9) reaching 5.8 MPa after long time soaking for battery safety due to its nonswelling property in ester electrolyte. Moreover, the as-prepared zwitterionic gel is beneficial to electrolyte salt dissociation, which further enhances the ionic conductivity and transference number of batteries. Consequently, the gel electrolyte can cycle for more than 500 h under a high current density of 3 mA cm^-2 on dendrite inhibition performance, and when assembled with LiFePO₄ as a cathode, the battery demonstrates a reversible specific capacity as high as 70 mAh g^-1 under a high current density of 5 C after 300 cycles. The rational designed solvophilic/solvophobic zwitterionic elastomers provide a guidance for engineering quasi-solid state electrolytes of different solvents with broad applications on flexible devices.

Flexible poly(vinylidene fluoride-co-hexafluoropropylene)-based gel polymer electrolyte for high-performance lithium-ion batteries

Gel polymer electrolytes (GPEs) have attracted ever-increasing attention in Li-ion batteries, due to their great thermal stability and excellent electrochemical performance. Here, a flexible poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-based GPE doped with an appropriate proportion of the PEO and SiO₂ is developed through a universal immersion precipitation method. This porous PVDF-HFP-PEO-SiO₂ GPE with high ionic conductivity and lithium-ion transference number (t_Li⁺) can enhance the electrochemical performance of LiFePO₄ cells, leading to superior rate capability and excellent cycling stability. Moreover, the PVDF-HFP-PEO-SiO₂ GPE effectively inhibits the lithium dendrite growth, thereby improving the safety of Li-ion batteries. In view of the simplicity in using the gel polymer electrolyte, it is believed that this novel GPE can be used as a potential candidate for high-performance Li-ion batteries.

Gel polymer electrolytes (GPEs) have attracted ever-increasing attention in Li-ion batteries, due to their great thermal stability and excellent electrochemical performance.

Facile fabrication of robust gel poly(ionic liquid) electrolytes via base treatment at room temperature

This article reports a facile fabrication of robust gel poly(ionic liquid) electrolytes via base treatment.

Gelation, Liquid Crystalline Behavior, and Ionic Conductivity of Nanocomposite Ionogel Electrolytes Based On Attapulgite Nanorods

Anisotropic nanoparticles and their dispersions have attracted much attention because of their distinguished characteristics and promising applications. In this study, the novel liquid crystalline nanocomposite ionogel electrolyte materials based on anisotropic nanoparticles of attapulgite (ATP) have been prepared. The gelation, liquid crystalline (LC) behavior, thermal stability, and ionic conductivity were systematically investigated. Rheological, polarized optical microscopy (POM), and small-angle X-ray scattering (SAXS) measurements demonstrated that these liquid crystalline ionogels showed a two-step mechanism consisting of gelation and subsequent reorganization of the gel. Interestingly, the obtained ionogel electrolytes were very stable and LC gel structures were not destroyed even though the temperature was as high as 200 °C. Furthermore, these ionogels possessed outstanding thermal stability and the decomposition temperature exceeded 400 °C. Remarkably, the LC nanocomposite ionogel electrolytes exhibited high room temperature ionic conductivity and the value still exceeded 1.0 × 10^-3 S/cm even when the ATP concentration up to 30 wt %. These novel findings are very useful for the fabrication of high temperature resistant electrochemical devices and liquid crystalline nanocomposite materials.

Substrate-Independent, Reversible, and Easy-Release Ionogel Adhesives with High Bonding Strength

It is highly desirable to develop reversible and easy-release adhesives with high bonding strength for a broad range of substrates, while the adhesion of low-surface-energy materials (e.g., polytetrafluoretyhylene, PTFE) is challenging. Herein, a substrate-independent ionogel adhesive is developed by blending an ionic liquid with the copolymer bearing charged segments. By regulating the viscoelastic properties of the ionogel, the adhesive and cohesive strength of the ionogel can be well balanced to maximize the bonding strength for different substrates. The as-developed ionogel exhibits high bonding strength (>0.3 MPa) for PTFE, plastics, metal, wood, and glass, because the variety of functional groups in the ionogel can form various supramolecular interactions with different substrates. The ionogel also exhibits reversible, easy-release, and reusable properties for multiple times of bonding and on-demand debonding without leaving obvious residues on the substrates. The ionogel has high potential for practical applications as temporal adhesives with high bonding strength.