Bidirectional molecularly imprinted membranes for selective recognition and separation of pyrimethamine: A double-faced loading strategy

Constructing molecularly imprinted membranes with instant noodles-like structure for selectively separating acteoside

Acteoside (ACT) was the main bioactive components in phenylethanoid glycosides of Cistanche tubulosa. Currently, the development of an efficient method for selectively separating ACT was crucial. Consequently, yolk-shell magnetic mesoporous carbon (YSMMC) was synthesized as a nanofiller to prepare molecularly imprinted membranes (ACT-MIMs) with instant noodles-like structure for selectively separating ACT. The numerous YSMMC were moved to the upper surface of ACT-MIMs by magnetic guidance and constructed the instant noodles-like structure in ACT-MIMs. The instant noodle-like structure increased the surface roughness of ACT-MIMs, which was conducive to improving the effective imprinted interface, increasing the selectivity of ACT-MIMs. In addition, the instant noodle-like structure had dendritic interleaved pathways in ACT-MIMs. The dendritic interleaved pathways can intercept ACT through ACT-MIMs, enhancing the permselectivity of ACT-MIMs. The prepared YSMMC possessed the dendritic shell and interlayer cavity structure can provide a great accommodation space, improving the rebinding capacities of ACT-MIMs. The high permselectivity (14.49), remarkable selectivity (7.52), and excellent rebinding capacity (120.48 mg/g) were achieved for the prepared ACT-MIMs. Thus, the design of ACT-MIMs with the instant noodles-like structure were valuable for selectively separating of bioactive components.

Preparation and Selective Adsorption Performance of the Carboxymethyl Salix psammophila Wood Powder-Imprinted Membrane for Tetracycline

Carboxymethyl Salix psammophila wood powder-imprinted membranes (CMSM-MIPs) were prepared by using wet spinning technology and molecular-imprinting technology for the selective removal of tetracycline from wastewater. Scanning electron microscopy, X-ray diffraction, thermogravimetry, and X-ray photoelectron spectroscopy characterizations demonstrate that CMSM-MIPs retain the membranous structure of Carboxymethyl Salix psammophila wood powder membranes, successfully encapsulate thin layers of imprinted polymers on the membrane surface, and exhibit excellent thermal stability. The adsorption results showed that CMSM-MIPs had the highest selective adsorption capacity for tetracycline, which was 253.8 mg/g. In addition, the adsorption capacities for oxytetracycline and chlortetracycline were 208.8 and 188 mg/g, respectively. It can be observed that CMSM-MIPs not only exhibit a high adsorption capacity for tetracycline but also demonstrate good adsorption capacities for oxytetracycline and chlortetracycline. The experimental results showed that CMSM-MIPs were best fitted with pseudo-second-order kinetics and most consistent with Freundlich fitting. The regeneration experiment showed that CMSM-MIPs still had good regeneration performance after 5 regeneration cycles. In conclusion, the CMSM-MIPs can not only have the natural adsorption performance of Salix psammophila wood powder but also give it higher selectivity through molecular imprinting, so as to achieve efficient removal of target organic pollutants in water.

Enhancing Cytochrome C Recognition and Adsorption through Epitope-Imprinted Mesoporous Silica with a Tailored Pore Size

We have reported the synthesis of epitope-imprinted mesoporous silica (EIMS) with an average pore size of 6.2 nm, which is similar to the geometrical size of the target protein, cytochrome C (Cyt c, 2.6 × 3.2 × 3.3 nm3), showing great recognition and large-scale adsorption performance. The characteristic fragment of Cyt c was used as a template and docked onto the surface of C16MIMCl micelles via multiple interactions. Nitrogen adsorption-desorption and transmission electron microscopy confirmed the successful preparation of EIMS. Due to the ordered pore structure, larger pore size, and high specific surface area, the prepared EIMS show superior specificity (IF = 3.8), excellent selectivity toward Cyt c, high adsorption capacity (249.6 mg g-1), and fast adsorption equilibrium (10 min). This study demonstrates the potential application of EIMS with a controllable pore size for high-effective and large-scale separation of Cyt c, providing a new approach for effective biomacromolecular recognition.

Molecularly imprinted composite membranes with interleaved imprinted network structure for highly selective separation of acteoside

Acteoside (ACT) is one of the phenylethanoid glycosides in Cistanche tubulosa. The ACT molecules have high medicinal value, but the content of ACT is scarce. Therefore, it is imperative to develop the ACT-based molecularly imprinted composite membranes (A-MICMs) with highly selective separation of ACT. In this study, the amine-polyhedral oligomeric sesquisiloxanes (NH2-POSS) were uniformly introduced into polydopamine modified polyvinylidene fluoride (pDA@PVDF) membranes to fabricate NH2-POSS-pDA@PVDF. Then, the ACT-imprinted layers were synthesized on the surface of NH2-POSS-pDA@PVDF to obtain A-MICMs. The results showed that the optimal conditions were 180 mg DA, 12 h DA self-polymerization time, 400 mg NH2-POSS and 10 h washing time for the synthesis of A-MICMs. The results of adsorption isotherm experiments showed that there was a single layer adsorbate analyte on the A-MICMs. The results of adsorption kinetic experiments showed that chemisorption mechanism played a major function in the adsorption process of A-MICMs for ACT. The A-MICMs exhibited the maximum rebinding capacity of 98.37 mg⋅g-1, an excellent rebinding selectivity of 4.63, and the permselectivity of 7.02. The same A-MICMs kept 95.99% of the maximum rebinding capacity for ACT after 5 adsorption-desorption cycles. The designed A-MICMs with the interleaved imprinted network structure have a potential to be applied to the highly selective separation of bioactive components from natural products.

Precise identification and ultrafast transport of specific molecules with nanofluid-functionalized imprinted membrane

Membrane-based imprinted sites for achieving specific molecule transport and precise recognition have great potential to revolutionize nanofiltration technology. Nonetheless, how to efficiently prepare imprinted membrane structures with accurate identification - ultrafast molecular transport - high stability in mobile phase remains a key issue and serious challenge. Herein, we have developed a dual-activation strategy to constructing nanofluid-functionalized membranes with double imprinted nanoscale channels (NMDINCs), realizing ultrafast transport performance as well as structure&size-exclusion selectivity in allusion to particular compounds. The resultant NMDINCs, founded on principal nanofluid-functionalized construction companied by the boronate affinity sol-gel imprinting systems, illustrated that delicate regulation towards polymerization framework as well as functionalization belonging to distinctive membrane structures was crucial for realizing ultrafast molecules transport combined with prominent molecules selectivity. The synergistic recognition of covalent bonds and non-covalent bonds driven by two functional monomers effectively realized the selective recognition to template molecules, leading to the high selective separation factors of Shikimic acid (SA)/ Para hydroxybenzoic acid（PHA）, SA/ P nitrophenol（PN）and catechol（CL）for 8.9, 8.14 and 7.23, respectively. The dynamic consecutive transport outcomes exhibited that numerous SA-dependent recognition sites could still keep reactivity under pump-driven permeation pressure for appreciable time, forcefully proving the successful construction as to high-efficiency membrane-based selective separation system. It is anticipated that this strategy as to the in situ introduction of nanofluid-functionalized construction into porous membrane would hold great promise in preparing high-intensities membrane-founded discriminating separation systems, which was equipped with prominent consecutive permeability as well as excellent selectivity.

Preparation of a Molecularly Imprinted Silica Nanoparticles Embedded Microfiltration Membrane for Selective Separation of Tetrabromobisphenol A from Water

The ubiquitous presence of tetrabromobisphenol A (TBBPA) in aquatic environments has caused severe environmental and public health concerns; it is therefore of great significance to develop effective techniques to remove this compound from contaminated waters. Herein, a TBBPA imprinted membrane was successfully fabricated via incorporating imprinted silica nanoparticles (SiO₂ NPs). The TBBPA imprinted layer was synthesized on the 3-(methacryloyloxy) propyltrimethoxysilane (KH-570) modified SiO₂ NPs via surface imprinting. Eluted TBBPA molecularly imprinted nanoparticles (E-TBBPA-MINs) were incorporated onto a polyvinylidene difluoride (PVDF) microfiltration membrane via vacuum-assisted filtration. The obtained E-TBBPA-MINs embedded membrane (E-TBBPA-MIM) showed appreciable permeation selectivity toward the structurally analogous to TBBPA (i.e., 6.74, 5.24 and 6.31 of the permselectivity factors for p-tert-butylphenol (BP), bisphenol A (BPA) and 4,4'-dihydroxybiphenyl (DDBP), respectively), far superior to the non-imprinted membrane (i.e., 1.47, 1.17 and 1.56 for BP, BPA and DDBP, respectively). The permselectivity mechanism of E-TBBPA-MIM could be attributed to the specific chemical adsorption and spatial complementation of TBBPA molecules by the imprinted cavities. The resulting E-TBBPA-MIM exhibited good stability after five adsorption/desorption cycles. The findings of this study validated the feasibility of developing nanoparticles embedded molecularly imprinted membrane for efficient separation and removal of TBBPA from water.

New Insights into High-Performance Nanocomposite Membranes with Threefold-Imprinted Layers for Selective Recognition and Separation

Herein, we reported on mixed-matrix membranes with polydopamine (PDA)-based threefold-imprinted layers (MMMs-PTIs), in which the dopamine molecules were simultaneously regarded as functional monomers and cross-linking agents during the first-in-class ternary-PDA-based imprinted method. Threefold-ibuprofen-imprinted layers were constructed into and onto the MMMs-PTIs through the phase inversion process, followed by suction filtration strategy, in which the PDA-based ibuprofen-imprinted activated carbon (AC)/SiO₂ and TiO₂/GO were chosen as fillers. Based on the threefold-imprinted SiO₂/AC and polymer and TiO₂/GO-loaded structure, rebinding capacities and permselectivity of MMMs-PTIs had been successfully enhanced, and the selective recognition and separation mechanism had been finally evaluated based on the static adsorption/permeation results. Both high rebinding capacity (53.22 mg/g) and adsorption selectivity (α > 2.0) had been achieved. Importantly, as to the permselectivity performance of MMMs-PTIs toward different compounds, the ibuprofen-permeation efficiencies (β value) of MMMs-PTIs reached 4.07, 4.08, and 3.77, respectively. That is to say, remarkable and stable permselectivity performance could be obtained, which demonstrated the successful preparation of good recognizability and permeability toward ibuprofen.

Molecularly Imprinted Affinity Membrane: A Review

A molecularly imprinted affinity membrane (MIAM) can perform separation with high selectivity due to its unique molecular recognition introduced from the molecular-printing technique. In this way, a MIAM is able to separate a specific or targeted molecule from a mixture. In addition, it is possible to achieve high selectivity while maintaining membrane permeability. Various methods have been developed to produce a MIAM with high selectivity and productivity, with their respective advantages and disadvantages. In this paper, the MIAM is reviewed comprehensively, from the fundamentals of the affinity membrane to its applications. First, the development of a MIAM and various preparation methods are presented. Then, applications of MIAMs in sensor, metal ion separation, and organic compound separation are discussed. The last part of the review discusses the outlook of MIAMs for future development.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Polydopamine-based multilevel molecularly imprinted nanocomposite membranes comprising metal organic frameworks for selective recognition and separation

Molecularly imprinted nanocomposite membranes with three-dimensional metal-organic frameworks (MOFs)-based structure (MINMs-TM) were successfully prepared by using propranolol as template molecule. Importantly, for the first time, polycarbonate track etch membranes had been used as the supporting surfaces to construct the polydopamine (PDA)-induced MOFs composite structure, in which the as-prepared PDA-modified surface would promote the crystallization and nucleation of ZIF-8-based composite layer. Based on the entire preparation processes of our design, the as-prepared PDA-induced ZIF-8-modified surfaces could be regarded as the imprinted-initiated units of sol-gel imprinting polymerization. Abundant recognition sits of propranolol were achieved in MINMs-TM, which showed characteristic properties of permeability and selectivity. Therefore, high adsorption capacity (41.31 mg/g) and fast adsorption equilibrium rate (within 30 min) had been successfully achieved. Meanwhile, excellent permselectivity rates (β) of MINMs-TM toward propranolol were also obtained as 5.04, 4.79 and 5.14, which MINMs-TM the successful synthesis of high-affinity and high-density propranolol-imprinted sites. Overall, for the practical selective separation and scalability, we had successfully MINMs-TM the preparation of MINMs-TM-based to selective rebinding and separation of propranolol from complex solution system and mimetic water sample, which had further confirmed the desired and potential applications of many environmental pollutants.

Zr-based metal organic framework nanoparticles coated with a molecularly imprinted polymer for trace diazinon surface enhanced Raman scattering analysis

In this study, a new surface imprinted polymer of type MOFs-MIPs was synthesized with diazinon as template and Zr-based metal organic framework (UiO-67) as matrix for trace diazinon surface enhanced...

Dual-imprinted organic/inorganic nanocomposite membranes with highly selective polydopamine-intimated nanostructures for pharmaceutically active compound separation

Here, the graphene oxide (GO)/SiO₂-loaded dual-imprinted membranes (GS-DIMs) were constructed based on the self-polymerization imprinting technique of dopamine, in which a twice polydopamine (PDA)-based imprinting strategy had been successfully developed to obtain the three-dimensional nanocomposite membrane-based separation system. Meanwhile, the pollution-intensive antibiotics of tetracycline (TC) was used as template molecule throughout the GS-DIMs synthesis, and the dopamine molecules were simultaneously used as functional monomer and cross-linking agent during the twice polydopamine (PDA)-based imprinting processes. Therefore, dual-TC-imprinted sites had been prepared based on the as-designed dual imprinting processes, the as-prepared GS-DIMs-based separation system with dual-TC-imprinted structures could not only allow for the largely enhanced rebinding result of 65.61 mg/g and faster adsorption equilibrium rate within 20 min, but also facilitate the permselectivity performance from TC-based complex separation system and mimetic water sample. Importantly, we demonstrated the applications and effects of the dual-imprinted membrane-based separation materials to selective rebinding and separation of TC from complex solution systems and mimetic water samples. The as-obtained permselectivity factors (β) around 4.0 strongly illustrated the efficiently selective separation ability and high-intensitive recognizability of TC than any other non-template molecules based on our GS-DIMs-based separation system. Overall, the as-designed GS-DIMs had great potential for selective separation applications and provided critical comparisons based on the as-achieved excellent rebinding and permselectivity performance, which encompassed innovative GO/SiO₂-loaded nanocomposite and PDA-based dual-TC-imprinted system.

Dual-imprinted mixed matrix membranes for selective recognition and separation: A synergetic imprinting strategy based on complex initiation system

Molecularly imprinted membranes (MIMs) with sufficient and even-distributed recognition sites that can break the permeability-selectivity trade-off phenomenon are desirable in chemical field of selective separation. Herein graphene oxide (GO)/TiO₂-loaded nanocomposite fibrous membranes were prepared by developing two kinds of tetracycline (TC)-imprinted systems in the same MIMs-based material. Thereinto, polydopamine-based and sol-gel-based imprinting processes were applied to the synthesis of GO/TiO₂-loaded dual-imprinted mixed matrix membranes (GT-DIMs). The as-prepared GT-DIMs encompassed innovative GO/TiO₂-based nanocomposite fibrous channels and two kinds of TC-imprinted systems, and critical comparisons regarding the fluxes, rebinding capacities and permselectivity were provided and studied. Importantly, dual-imprinted system of GT-DIMs could not only allow for largely enhanced rebinding result (70.63 mg/g) and fast adsorption equilibrium rate within 30 min, but also facilitate the high permselectivity of TC in complex separation systems and lab-simulated wastewater samples. The permselectivity factors were all around 5.0, which strongly demonstrated the efficiently selective recognition and separation performance of GT-DIMs. Overall, based on testing results of practical separation and scalability, excellent structural stability and separation continuity had been successfully obtained for selective separation applications of pollutants.

Comparative investigation on removal characteristics of tetracycline from water by modified wood membranes with different channel walls

The alkali-innocuous citric acid (CA) modified wood membranes (WMs) have been developed as facile, economical, and effective adsorption membranes to remove tetracycline (TC) from water. However, TC removal by modified WMs with different types of wood channel walls have rarely been compared. Therefore, in this study, modified WMs were prepared with pinewood (PW) and basswood (BW). The PW and BW WMs before and after modification were characterized by SEM, EDX, XRD, ATR-FTIR, TGA, contact angle and zeta potential. After modification, cellulose I in cellulose crystal structures of raw WM transformed to cellulose II and the contents of carboxylic groups for PW and BW were enhanced to make the hydrophilicity of WM surface increased. Compared with modified PW WMs, particles formed on the channel walls of modified BW WMs containing vessel pits to make more carboxylic groups introduced. The TC adsorption breakthrough curves showed that the 6 wt% alkali- CA modified BW had an effective filtration volume of 1968 bed volume (BV) compared with the 4 wt% alkali-CA modified PW of 1205 BV as the influent TC and breakthrough point were chosen at 2 and 0.5 mg/L, respectively. At low pH, TC complex with WM surfaces through Lewis acid-base interaction. Zwitterionic TC was shown to favor adsorption onto WM via hydrogen bonding at pH of around 5. With further increasing pH, TC adsorption efficiency decreased due to the electrostatic repulsion. The costs of modified BW and PW are about 0.0054-0.0126 US$/m³ and 0.01-0.024 US$/m³ for a low TC concentration effluent (0-0.5 mg/L), respectively. This work shed a new sight on how to develop economical and effective adsorption WMs for contaminants removal from water.

Novel Molecular Organic Framework Composite Molecularly Imprinted Nanofibrous Membranes with a Bioinspired Viscid Bead Structure for Selective Recognition and Separation of Atrazine

In this work, novel atrazine (ATZ) molecularly imprinted nanofibrous membranes (A-MNMs) with a molecular organic framework (MOF)-based viscid bead structure were developed based on a natural spider-web-inspired strategy for selective separation of ATZ. Poly(vinylidene fluoride)/poly(vinyl alcohol) (PVDF/PVA) blended nanofibrous membranes as the basal membrane were synthesized by electrospinning technology combined with a chemical cross-linking procedure. The most critical design is that MOF nanocrystals as the matrix of the viscid bead structure were assembled on the PVDF/PVA blended nanofibrous membrane surface and the specific recognition sites were efficiently constructed on the surface and pores of the MOF-based viscid bead structure by a surface imprinting strategy. Significantly, the as-synthesized MOF-based viscid bead structure has an enhanced specific surface area, which helps to form abundant specific recognition sites in A-MNMs. Therefore, the A-MNMs with a spider-web-like structure presented an enhanced rebinding capacity (37.62 mg g^-1) and permselectivity (permselectivity factors β were 4.21 and 4.31) toward ATZ. Moreover, the A-MNMs display strong practicability in separation of ATZ from simulated environmental water samples. The presented work has shown tremendous potential for preparing natural spider-web-like molecularly imprinted membranes (MIMs) for selective separation of environment pollutants.

Biomimetic design and synthesis of visible-light-driven g-C3N4 nanotube @polydopamine/NiCo-layered double hydroxides composite photocatalysts for improved photocatalytic hydrogen evolution activity

In the practical process of photocatalytic H₂ evolution, optimizing the ability of light absorption and charge spatial separation is the top priority for improving the photocatalytic performance. In this study, we elaborately engineer neoteric g-C₃N₄ nanotube@polydopamine(pDA)/NiCo-LDH (LPC) composite photocatalyst by combining hydrothermal and calcination method. In the LPC composite system, the one-dimensional (1D) g-C₃N₄ nanotubes with larger specific surface area can afford more active sites and conduce to shorten the charge migration distance, as well as the high-speed mass transfer in the nanotube can accelerate the reaction course. The g-C₃N₄/NiCo-LDH type-II heterojunction can efficaciously stimulate the spatial separation of photo-produced charge. In addition, pDA as heterojunction metal-free interface mediums can provide multiple action (π-π* electron delocalization effect, adhesive action and photosensitization). The optimized LPC nanocomposite displays about 3.3-fold high photoactivity for H₂ evolution compared with the g-C₃N₄ nanotube under solar light irradiation. In addition, the cycle experiment result shows that the LPC composite photocatalyst possesses superior stability and recyclability. The resultant g-C₃N₄@pDA/NiCo-LDH composite photocatalyst displays the potential practical application in the field of energy conversion.

Antifouling molecularly imprinted membranes for pretreatment of milk samples: Selective separation and detection of lincomycin

As a veterinary antibiotic, lincomycin (LIN) residues in milk are raising concerns of public on account of potential harm to human health. Efficient strategy is eagerly desired for detection of LIN from milk samples. Hence, lincomycin molecularly imprinted membranes (LINMIMs) were developed for selective separation of LIN as an efficient pretreatment of milk samples. The synergistic effect of polyethylenimine and dopamine provided effective antifouling performance by improving the hydrophilicity. Based on click chemistry, specific recognition sites were facilely formed on membranes using 4-vinylpyridine as functional monomers. The satisfactory rebinding capacity (151.62 mg g^-1), permselectivity (4.43), together with the linear dependence (R² = 0.9902) of concentrations in eluents and original samples. Moreover, the method was utilized to determine LIN from milk, with good recovery and relative standard deviation. Achievements in this work will actively promote the development of efficient detection technology.

Multilevel mineral-coated imprinted nanocomposite membranes for template-dependent recognition and separation: A well-designed strategy with PDA/CaCO3-based loading structure

In spite of the intense efforts in selective separation field, the utilization and preparation of membrane-associated molecularly imprinted membranes with both enhanced rebinding capacities and high permselectivity performance still remain strong challenges. Herein, the bioinspired PDA-modified porous regenerated cellulose membrane (pRCMs) with mineral-coated multilevel structure was first proposed for the preparation of PDA/CaCO₃-based imprinted nanocomposite membranes (PCIMs), m-cresol was chosen as the template molecule. Importantly, this bioinspired methodology was redeveloped and optimized to obtain abundant and uniformly distributed CaCO₃ nanocomposite on the surfaces of PDA@pRCMs. The as-designed sandwich-like imprinting structure were then constructed on PDA/CaCO₃-based surfaces by developing a simple sol-gel imprinting process. Attributing to the design of the uniform CaCO₃/PDA@pRCMs surfaces, amount of m-cresol-imprinted sites and permeation selectivity could be both optimized, it was no surprise that more excellent rebinding capacity (97.4 mg g^-1), fast adsorption kinetics and high permselectivity coefficients (more than 13) were successfully achieved. Importantly, the whole synthesis process was conducted without complicated procedures and polluting the environment. Finally, the experimental results mentioned above, together with the green synthesis processes strongly demonstrated that our synthesis methodology of PCIMs had great potential for applications in various fields of selective separation, chemical industry, environment, biological medicine and so on.

Bio-inspired fabrication of Ester-functionalized imprinted composite membrane for rapid and high-efficient recovery of lithium ion from seawater

Lithium ion (Li⁺) is one of the important sustainable resource and it's urgently demanded to develop high-selectivity and high-efficient method to extract of Li⁺ from seawater. Hence, we propose the ester-functionalized ion-imprinted membrane (IIMs) with high selectivity and stability for the rebinding and separation of Li⁺ in aqueous medium via ion imprinted technology and membrane separation technology. In this work, the hydrophilic polydimethylsiloxane membranes (PDMS) are synthesized by self-polymerization of dopamine (DA) in aqueous solution, resulting in the fabrication of dense poly-dopamine (PDA) layer on the surface of PDMS (PDMS-PDA). In view of weak bonding forces (such as hydrogen bond, ionic bond and Van der Waals' force) between traditional imprinted polymer and ligand, the ester groups are formed between modified PDMS-PDA and ligand by surface grafting. The obtained Li⁺ imprinted membranes (Li-IIMs) have a suitable cavity and high adsorption capacity toward Li⁺ which reveal a high rebinding capacity (50.872 mg g^-1) toward Li⁺ based on ample rebinding sites and strong affinity force. The superior relative selectivity coefficients (α_Na/Li, α_K/Li and α_Rb/Li are 1.71, 4.56 and 3.80, respectively) can be also achieved. The selectivity factors of Li-IIMs for Na⁺, K⁺ and Rb⁺ are estimated to be 2.52, 2.8 and 3.03 times larger than Li⁺ non-imprinted membranes (Li-NIMs), which imply the superior selectivity of Li-IIMs toward Li⁺. The regeneration ability of Li-IIMs is observed by systematic batch experiments. In summary, it can be concluded that the rebinding capacities of Li-IIMs is slightly decrease after eluting process, owing to the Li-IIMs with outstanding stability performance. Presentation of the method pave a fine prospect for coming true the long-term use of imprinted membrane.

Fabrication and evaluation of bioinspired pDA@TiO2-based ibuprofen-imprinted nanocomposite membranes for highly selective adsorption and separation applications

Highly selective and constitutionally stable TiO₂/pDA-based nanocomposite-imprinted membranes for selective separation of ibuprofen molecules.