Construction of a composite microporous polyethylene membrane with enhanced fouling resistance for water treatment

Thiol-Ene Click Reaction in Constructing Liquid Separation Membranes for Water Treatment

In the evolving landscape of water treatment, membrane technology has ascended to an instrumental role, underscored by its unmatched efficacy and ubiquity. Diverse synthesis and modification techniques are employed to fabricate state-of-the-art liquid separation membranes. Click reactions, distinguished by their rapid kinetics, minimal byproduct generation, and simple reaction condition, emerge as a potent paradigm for devising eco-functional materials. While the metal-free thiol-ene click reaction is acknowledged as a viable approach for membrane material innovation, a systematic elucidation of its applicability in liquid separation membrane development remains conspicuously absent. This review elucidates the pre-functionalization strategies of substrate materials tailored for thiol-ene reactions, notably highlighting thiolation and introducing unsaturated moieties. The consequential implications of thiol-ene reactions on membrane properties-including trade-off effect, surface wettability, and antifouling property-are discussed. The application of thiol-ene reaction in fabricating various liquid separation membranes for different water treatment processes, including wastewater treatment, oil/water separation, and ion separation, are reviewed. Finally, the prospects of thiol-ene reaction in designing novel liquid separation membrane, including pre-functionalization, products prediction, and solute-solute separation membrane, are proposed. This review endeavors to furnish invaluable insights, paving the way for expanding the horizons of thiol-ene reaction application in liquid separation membrane fabrication.

Structure and Properties of Epoxy Resin/Graphene Oxide Composites Prepared from Silicon Dioxide-Modified Graphene Oxide

In this study, graphene oxide (GO) was modified via electrostatic interactions and chemical grafting by silica (SiO2), and two SiO2@GO hybrids (GO-A and GO-B, respectively) with different structures were obtained and carefully characterized. Results confirmed the successful grafting of SiO2 onto the GO surface using both strategies. The distribution of SiO2 particles on the surface of GO-A was denser and more agglomerated, while it was more uniform on the surface of GO-B. Then, epoxy resin (EP)/GO composites were prepared. The curing mechanism of EP/GO composites was studied by differential scanning calorimetry and in situ infrared spectra spectroscopy. Results of tensile tests, hardness tests, dynamic mechanical analysis, and dielectric measurement revealed that EP/GO-B exhibited the highest tensile properties, with a tensile strength of 79 MPa, a 43% increase compared to raw EP. Furthermore, the addition of fillers improved the hardness of EP, and EP/GO-B showed the highest energy storage modulus of 1900 MPa. The inclusion of SiO2@GO hybrid fillers enhanced the dielectric constant, volume resistivity, and breakdown voltage of EP/GO composites. Among these, EP/GO-B displayed the lowest dielectric loss, relatively good insulation, and relatively high volume resistivity and breakdown voltage. A related mechanism was proposed.

Impact analysis of hydraulic residence time and dissolved oxygen on performance efficiency and microbial community in N, N-dimethylformamide wastewater treated by an AnSBR-ASBR

Suitable operating parameters are one of the key factors to efficient and stable biological wastewater treatment of N, N-dimethylformamide (DMF) wastewater. In this study, an improved AnSBR-ASBR reactor (anaerobic sequencing batch reactor, AnSBR, and aerobic SBR, ASBR, run in series) was used to investigated the effects of operating conditions such as hydraulic residence time (HRT), AnSBR stirring speed and ASBR dissolved oxygen (DO) for DMF wastewater treatment. When HRT decreased from 24 h to 12 h, the average removal rates of COD by the AnSBR were 34.59% and 39.54%, respectively. Meanwhile, the removal rate of NH4+-N by ASBR decreased from 88.38% to 62.81%. The DMF removal rate reached the best at 18 h and the expression of dehydrogenase was the highest in the AnSBR. The abundance of Megasphaera, the dominant sugar-degrading bacteria in the AnSBR, continued to decline due to the decrease of HRT. The relative abundance of Methanobacterium gradually increased to 80.2% with the decrease of HRT and that hydrotrophic methanogenesis dominated the methanogenic process. The HRT decrease promoted butyrate and pyruvate metabolism in anaerobic sludge, but the proportion of glycolysis and methane metabolism decreased. The AnSBR-ASBR reactor had the best operation performance when HRT was 18 h, AnSBR speed was 220 r/min, and ASBR DO content was 3-4 mg/L. This study provided an effective reference for the reasonable selection of operating parameters in the treatment of DMF-containing wastewater by the AnSBR-ASBR.

Zwitterionic surface modification of polyethylene via atmospheric plasma-induced polymerization of (vinylbenzyl-)sulfobetaine and evaluation of antifouling properties

Zwitterionic polymer brushes were grafted from bulk polyethylene (PE) by air plasma activation of the PE surface followed by radical polymerization of the zwitterionic styrene derivative (vinylbenzyl)sulfobetaine (VBSB). Successful formation of dense poly-(VBSB)-brush layers was confirmed by goniometry, IR spectroscopy, XPS and ToF-SIMS analysis. The resulting zwitterionic layers are about 50-100 nm thick and cause extremely low contact angles of 10° (water) on the material. Correspondingly we determined a high density of > 1.0 × 10¹⁶ solvent accessible zwitterions/cm² (corresponding to 2,0 *10^-8 mol/cm²) by a UV-based ion-exchange assay with crystal violet. The elemental composition as determined by XPS and characteristic absorption bands in the IR spectra confirmed the presence of zwitterionic sulfobetaine polymer brushes. The antifouling properties of the resulting materials were evaluated in a bacterial adhesion test against gram-positive bacteria (S. aureus). We observed significantly reduced cellular adhesion of the zwitterionic material compared to pristine PE. These microbiological tests were complemented by tests in natural seawater. During a test period of 21 days, confocal microscopy revealed excellent antifouling properties and confirmed the operating antifouling mechanism. The procedure reported herein allows the efficient surface modification of bulk PE with zwitterionic sulfobetaine polymer brushes via a scalable approach. The resulting modified PE retains important properties of the bulk material and has excellent and durable antifouling properties.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

Current State-of-the-Art in Membrane Formation from Ultra-High Molecular Weight Polyethylene

One of the materials that attracts attention as a potential material for membrane formation is ultrahigh molecular weight polyethylene (UHMWPE). One potential material for membrane formation is ultrahigh molecular weight polyethylene (UHMWPE). The present review summarizes the results of studies carried out over the last 30 years in the field of preparation, modification and structure and property control of membranes made from ultrahigh molecular weight polyethylene. The review also presents a classification of the methods of membrane formation from this polymer and analyzes the conventional (based on the analysis of incomplete phase diagrams) and alternative (based on the analysis of phase diagrams supplemented by a boundary line reflecting the polymer swelling degree dependence on temperature) physicochemical concepts of the thermally induced phase separation (TIPS) method used to prepare UHMWPE membranes. It also considers the main ways to control the structure and properties of UHMWPE membranes obtained by TIPS and the original variations of this method. This review discusses the current challenges in UHMWPE membrane formation, such as the preparation of a homogeneous solution and membrane shrinkage. Finally, the article speculates about the modification and application of UHMWPE membranes and further development prospects. Thus, this paper summarizes the achievements in all aspects of UHMWPE membrane studies.

Effects of Silicon Dioxide/Graphene Oxide Hybrid Modification on Curing Kinetics of Epoxy Resin

In this study, SiO₂-grafted graphene oxide (GO-SiO₂) was prepared using the oxygen-containing group on the GO surface as the active site of the reaction. The chemical structure, morphology, and particle size of GO and GO-SiO₂ were carefully investigated by Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, thermogravimetry, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy, and the results proved that the grafting modification was successful. Furthermore, epoxy (EP)/GO composites were prepared, and the effects of unmodified GO and GO-SiO₂ on the curing kinetics of EP were comparatively studied by differential scanning calorimetry (DSC). The results showed that, compared with neat EP and EP/GO, GO-SiO₂ significantly reduces the curing temperature of the composites, indicating that GO-SiO₂ has a more significant catalytic effect on the curing process of EP. The calculation results of the Kissinger method showed that the curing activation energy of EP/GO-SiO₂ is obviously lower than that of EP/GO and neat EP. Results of the Ozawa method showed that the introduction of GO-SiO₂ reduces the curing activation energy during the whole curing process, and in the middle and late stages of curing (α = 0.5-1) can significantly reduce the curing activation energy. The related mechanism has been proposed.

Self-floating photocatalytic hydrogel for efficient removal of Microcystis aeruginosa and degradation of microcystins-LR

Cyanobacterial harmful algal blooms (CyanoHABs) and the release of cyanotoxins have posed adverse impacts to aquatic system and human health. In this study, a novel self-floating Ag/AgCl@LaFeO₃ (ALFO) photocatalytic hydrogel was prepared via freeze-thaw method for removal of Microcystis aeruginosa (M. aeruginosa). The ALFO hydrogel performed an excellent photocatalytic activity with a 99.4% removal efficiency of chlorophyll a within 4 h. It can still remove above 95% chlorophyll a after six consecutive recycles. Besides it has also shown excellent mechanical strength and elasticity, which can ensure its use in practical applications. The mechanisms of M. aeruginosa inactivation are attributed to •O₂^- and •OH generated by the ALFO hydrogel under visible light radiation. In addition, •O₂^- and •OH can further oxidative degrade and even mineralize the leaked algae organic matter, avoiding the recurrence of CyanoHABs. What's more, the ALFO hydrogel owns good photocatalytic degradation performance for microcystins-LR (MC-LR) with a 97% removal efficiency within 90 min. A possible photocatalytic degradation pathway of MC-LR was proposed through the identification of the intermediate products during the photocatalytic reaction, which confirmed the reduction of MC-LR toxicity. This work develops recyclable a self-floating ALFO hydrogel to simultaneously inactivate M. aeruginosa and degrade MC-LR, providing a prospective method for governing and controlling CyanoHABs in practical application.

Effects of graphene oxide size on curing kinetics of epoxy resin

To study the effects of graphene oxide (GO) size on the curing kinetics of epoxy resin (EP), two kinds of GO were selected and characterized by Fourier transform infrared spectrometry (FT-IR), FT-Raman spectrometry (FTIR-Raman), thermo gravimetric analysis (TGA), dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The results showed that the two kinds of GO had similar chemical structures but different sizes-the average particle size of GO-A was 190.1 nm and that of GO-B was 1510 nm, and GO-A has more oxidizing groups on its surface. The two kinds of GO were separately added to EP, and the curing kinetics of GO/EP composites and neat EP were investigated through differential scanning calorimetry (DSC). It can be seen that the addition of GO promoted the curing process of the EP system, and GO-A had a more significant catalytic effect. Furthermore, the curing activation energy (E a) was calculated by Kissinger model, and the change of E a in the whole curing reaction process was studied by Ozawa method to further understand the curing mechanism. It showed that the apparent E a of EP system increases with the increase of the conversion rate, and E a of EP-A is obviously lower in the early curing stage. However, as the curing reaction proceeds, E a of EP-B is a little lower than that of EP-A in the later curing stage. But EP-A has the lowest E a combined with the whole process from Kissinger method. To sum up, it can be concluded that the curing process of EP can be promoted by adding GO and the smaller size (190.1 nm) of GO had a greater effect and lower E a than the GO with particle size of 1510 nm. And the related mechanisms were discussed and analyzed.

Water absorption dependence of the formation of poly(vinyl alcohol)-iodine complexes for poly(vinyl alcohol) films

Poly(vinyl alcohol) (PVA) films annealed at different temperatures are used to explore the effects of the water absorption on the formation of PVA–iodine complexes. It's found that the higher the annealing temperature, the stronger the interaction force between PVA segments, and the smaller the free volume of the PVA films. These mainly lead to the reduction of the amount of PVA segments with a moderate degree of hydration (i.e., PVA segments with moderate mobility), which are the major segments participating in the formation of PVA–iodine complexes. Therefore, PVA films with higher water absorption not only possess faster complexation speed and form more PVA–iodine complexes, but also increase the proportion of polyiodide ions with a longer length. Moreover, the complexation restricts the PVA segments with high mobility, resulting in the formation of the intermolecular ordered structure. The water absorption dependence may guide the dyeing process to obtain PVA polarizers with excellent optical performance.

Swelling process improves the mobility of PVA segments, while dyeing process restricts that. And there is a large water absorption dependence on the formation of PVA–iodine complexes.

Exploring Impacts of Hyper-Branched Polyester Surface Modification of Graphene Oxide on the Mechanical Performances of Acrylonitrile-Butadiene-Styrene

In this manuscript, the graphene oxide (GO) was modified by hyper-branched polyester (HBP). The effects of GO or modified GO (HBP-m-GO) on the mechanical performance and wearing properties were investigated. The results of X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscopy (TEM) revealed the successful grafting of HBP onto GO. The thermogravimetric analysis (TGA) indicated that the graft amount of HBP is calculated to be 9.6 wt%. The GO or HBP-m-GO was added into acrylonitrile-butadiene-styrene copolymer (ABS) to prepare the ABS/GO composites. The mechanical properties and wear performance of the composites were studied to comparatively study the impact of GO modification on the properties of the composites. The results revealed that the addition of GO has a significant effect on the mechanical properties of ABS, and when HBP-m-GO was added, the elastic modulus and tensile strength of ABS/HBP-m-GO increased evidently compared with ABS/GO. The tensile strength increased from 42.1 ± 0.6 MPa of pure ABS to 55.9 ± 0.9 MPa, up to 30%. Meanwhile, the elongation at break was significantly higher than ABS/GO to 20.1 ± 1.3%, slightly lower than that of pure ABS. For wear performance, the addition of raw GO decreased the friction coefficient, and when the HBP-m-GO was added, the friction coefficient of the ABS/HBP-m-GO dropped more evidently. Meanwhile, the weight loss during the wear test decreased evidently. The related mechanism was discussed.

Impacts of Modified Graphite Oxide on Crystallization, Thermal and Mechanical Properties of Polybutylene Terephthalate

In this study, the surface modification on graphene oxide (GO) was performed using octadecylamine (ODA). Furthermore, polybutylene terephthalate/GO (PBT/GO) composites were prepared to elucidate the role of GO surface modification on the mechanical performance, thermal stability and crystallization behavior. Results of Fourier transform infrared spectra (FT-IR), Raman spectrum, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM) revealed that ODA was successfully grafted on GO. Differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), tensile test, Izod impact strength test and TGA were carried out on the PBT/GO composites. Results indicated that the addition of raw GO can enhance the crystallization temperature and degree of crystallinity and can slightly improve the thermal stability and tensile strength of the composites. However, the impact strength and elongation at break were seriously decreased owing to the poor compatibility between the GO and PBT matrix. Once the modified GO was added, the crystallization temperature and degree of crystallinity were greatly increased. The tensile strength increased greatly while the elongation at break and Izod impact strength were efficiently maintained; these were evidently higher than those of PBT/raw GO. Moreover, thermal stability was greatly enhanced. SEM (scanning electron microscope) observation results on the impact-fractured surface clearly confirmed the improved compatibility between the modified GO and PBT matrix. A related mechanism had been discussed.

New Method toward a Robust Covalently Attached Cross-Linked Nanofiltration Membrane

As nanofiltration applications increase in diversity, there is a need for new fabrication methods to prepare chemically and thermally stable membranes with high retention performance. In this work, thio-bromo "click" chemistry was adapted for the fabrication of a robust covalently attached and ultrathin nanofiltration membrane. The selective layer was formed on a pre-functionalized porous ceramic surface via a novel, liquid-vapor interfacial polymerization method. Compared to the most common conventional interfacial polymerization procedure, no harmful solvents and a minimal amount of reagents were used. The properties of the membrane selective layer and its free-standing equivalent were characterized by complementary physicochemical analysis. The stability of the thin selective layer was established in water, ethanol, non-polar solvents, and up to 150 °C. The potential as a nanofiltration membrane was confirmed through solvent permeability tests (water, ethanol, hexane, and toluene), PEG-in-water molecular weight cut-off measurements (≈700 g mol^-1), and dye retention measurements.