Efficient separation of small organic contaminants in water using functionalized nanoporous graphene membranes: Insights from molecular dynamics simulations

A review on artificial water channels incorporated polyamide membranes for water purification: Transport mechanisms and performance

While thin-film composite (TFC) polyamide (PA) membranes are advanced for removing salts and trace organic contaminants (TrOCs) from water, TFC PA membranes encounter a water permeance-selectivity trade-off due to PA layer structural characteristics. Drawing inspiration from the excellent water permeance and solute rejection of natural biological channels, the development of analogous artificial water channels (AWCs) in TFC PA membranes (abbreviated as AWCM) promises to achieve superior mass transfer efficiency, enabling breaking the upper bound of water permeance and selectivity. Herein, we first discussed the types and structural characteristics of AWCs, followed by summarizing the methods for constructing AWCM. We discussed whether the AWCs acted as the primary mass transfer channels in AWCM and emphasized the important role of the AWCs in water transport and ion/TrOCs rejection. We thoroughly summarized the molecular-level mechanisms and structure-performance relationship of water molecules, ions, and TrOCs transport in the confined nanospace of AWCs, which laid the foundation for illustrating the enhanced water permeance and salt/TrOCs selectivity of AWCM. Finally, we discussed the challenges encountered in the field of AWCM and proposed future perspectives for practical applications. This review is expected to offer guidance for understanding the transport mechanisms of AWCM and developing next-generation membrane for effective water treatment.

Interlayered Interface of a Thin Film Composite Janus Membrane for Sieving Volatile Substances in Membrane Distillation

Hypersaline wastewater treatment using membrane distillation (MD) has gained significant attention due to its ability to completely reject nonvolatile substances. However, a critical limitation of current MD membranes is their inability to intercept volatile substances owing to their large membrane pores. Additionally, the strong interaction between volatile substances and MD membranes underwater tends to cause membrane wetting. To overcome these challenges, we developed a dual-layer thin film composite (TFC) Janus membrane through electrospinning and sequential interfacial polymerization of a polyamide (PA) layer and cross-linking a polyvinyl alcohol/polyacrylic acid (PP) layer. The resulting Janus membrane exhibited high flux (>27 L m^-2 h^-1), salt rejection of ∼100%, phenol rejection of ∼90%, and excellent resistance to wetting and fouling. The interlayered interface between the PA and PP layer allowed the sieve of volatile substances by limiting their dissolution-diffusion, with the increasing hydrogen bond network formation preventing their transport. In contrast, small water molecules with powerful dynamics were permeable through the TFC membrane. Both experimental and molecular dynamics simulation results elucidated the sieving mechanism. Our findings demonstrate that this type of TFC Janus membrane can serve as a novel strategy to design next-generation MD membranes against volatile and non-volatile contaminants, which can have significant implications in the treatment of complex hypersaline wastewater.

Polymeric membranes functionalized with nanomaterials (MP@NMs): A review of advances in pesticide removal

The excessive contamination of drinking water sources by pesticides has a pernicious impact on human health and the environment since only 0.1% of pesticides is utilized effectively to control the and the rest is deposited in the environment. Filtration by polymeric membranes has become a promising technique to deal with this problem; however, the scientific community, in the need to find better pesticide retention results, has begun to meddle in the functionalization of polymeric membranes. Given the great variety of membrane, polymer, and nanomaterial synthesis methods present in the market, the possibilities of obtaining membranes that adjust to different variables and characteristics related to a certain pesticide are relatively extensive, so it is expected that this technology will represent one of the main pesticide removal strategies in the future. In this direction, this review focused on, - the main characteristics of the nanomaterials and their impact on pristine polymeric membranes; - the removal performance of functionalized membranes; and - the main mechanisms by which membranes can retain pesticides. Based on these insights, the functionalized polymeric membranes can be considered as a promising technology in the removal of pesticides since the removal performance of this technology against pesticide showed a significant increase. Obtaining membranes that adjust to different variables and characteristics related to a certain pesticide are relatively extensive, so it is expected that functionalized membrane technology will represent one of the main pesticide removal strategies in the future.

Review of functionalized nano porous membranes for desalination and water purification: MD simulations perspective

Today, it is known that most of the water sources in the world are either drying out or contaminated. With the increasing population, the water demand is increasing drastically almost in every sector each year, which makes processes like water treatment and desalination one of the most critical environmental subjects of the future. Therefore, developing energy-efficient and faster methods are a must for the industry. Using functional groups on the membranes is known to be an effective way to develop shorter routes for water treatment. Accordingly, a review of nano-porous structures having functional groups used or designed for desalination and water treatment is presented in this study. A systematic scan has been conducted in the literature for the studies performed by molecular dynamics simulations. The selected studies have been classified according to membrane geometry, actuation mechanism, functionalized groups, and contaminant materials. Permeability, rejection rate, pressure, and temperature ranges are compiled for all of the studies examined. It has been observed that the pore size of a well-designed membrane should be small enough to reject contaminant molecules, atoms, or ions but wide enough to allow high water permeation. Adding functional groups to membranes is observed to affect the permeability and the rejection rate. In general, hydrophilic functional groups around the pores increase membrane permeability. In contrast, hydrophobic ones decrease the permeability. Besides affecting water permeation, the usage of charged functional groups mainly affects the rejection rate of ions and charged molecules.

Removal of methanol from water by capacitive deionization system combined with functional nanoporous graphene membrane

In this article, molecular dynamics simulations were used to examine the feasibility of capacitive deionization (CDI) system combined with a functionalized nanoporous graphene (NPG) membrane for removing methanol from water. The radial distribution function of electrode-methanol and methanol-water, the self-diffusion coefficient of methanol and water, the water density near the membrane, the interaction energy between methanol and membrane, the hydrogen bond structure between methanol and water, and the 2D density map of methanol molecules near the membrane under different electric field (EF) (to simulate the effect of capacitance) were examined to evaluate the separation performance of NPG membranes with hydrogen-passivated pores for methanol. The findings show that an EF with appropriate strength can decrease the amount of water molecules near methanol, increase the self-diffusion coefficient of methanol and water, increase hydrophobicity of hydrogenated pores, decrease the interaction between the NPG membrane and methanol, and weaken hydrogen bond interaction between water and methanol molecules. All these findings suggest that an appropriate EF can improve the NPG membrane's permeability to methanol, and verify the feasibility of CDI system combined with hydrogenated NPG membrane to remove methanol from water. This study is expected to propose a potential CDI application technology, and also give a novel idea for the removal of small organic molecules in water by functionalized NPG membrane.

On the Choice of Different Water Model in Molecular Dynamics Simulations of Nanopore Transport Phenomena

The water transport through nanoporous multilayered graphene at 300k is investigated using molecular dynamics (MD) simulation with different water models in this study. We used functionalized and non-functionalized membranes along with five different 3-point rigid water models: SPC (simple point charge), SPC/E (extended simple point charge), TIP3P-FB (transferable intermolecular potential with 3 points-Force Balance), TIP3P-EW (transferable intermolecular potential with 3 points with Ewald summation) and OPC3 (3-point optimal point charge) water models. Based on our simulations with two water reservoirs and a porous multilayered graphene membrane in-between them, it is evident that the water transport varies significantly depending on the water model used, which is in good agreement with previous works. This study contributes to the selection of a water model for molecular dynamics simulations of water transport through multilayered porous graphene.

Differences in water and vapor transport through angstrom-scale pores in atomically thin membranes

The transport of water through nanoscale capillaries/pores plays a prominent role in biology, ionic/molecular separations, water treatment and protective applications. However, the mechanisms of water and vapor transport through nanoscale confinements remain to be fully understood. Angstrom-scale pores (~2.8-6.6 Å) introduced into the atomically thin graphene lattice represent ideal model systems to probe water transport at the molecular-length scale with short pores (aspect ratio ~1-1.9) i.e., pore diameters approach the pore length (~3.4 Å) at the theoretical limit of material thickness. Here, we report on orders of magnitude differences (~80×) between transport of water vapor (~44.2-52.4 g m^-2 day^-1 Pa^-1) and liquid water (0.6-2 g m^-2 day^-1 Pa^-1) through nanopores (~2.8-6.6 Å in diameter) in monolayer graphene and rationalize this difference via a flow resistance model in which liquid water permeation occurs near the continuum regime whereas water vapor transport occurs in the free molecular flow regime. We demonstrate centimeter-scale atomically thin graphene membranes with up to an order of magnitude higher water vapor transport rate (~5.4-6.1 × 10⁴g m^-2 day^-1) than most commercially available ultra-breathable protective materials while effectively blocking even sub-nanometer (>0.66 nm) model ions/molecules.

Graphene based composite membranes for environmental toxicology remediation, critical approach towards environmental management

Graphene-based composite membranes, as laminated, stacked, and assembled architectures of graphene, have surpassed other conventional membranes with their advanced and preeminent structural specialization and potential use in a wide range of sustainable and environmental applications. The characteristic membrane features such as distinct laminar morphology, tailored physicochemical properties, as well as extraordinary molecular properties have fascinated scientists. Due to remarkable mechanical properties, these membranes can be easily fabricated. Recent progress has been achieved by graphene and its derivatives-based membranes to purify water and gases for environmental remediation. This review explained the latest and groundbreaking advances in chemical design, fabrication, and application of graphene-based membranes. Special attention is paid to the recent developments on graphene-based composites into membranes with various forms: free-standing, layered, and graphene-based nanocomposite membranes. Furthermore, a unique approach on environmental management with as-fabricated membranes is provided by discussing the effect of physicochemical properties. Consequently, their full-scale use for environmental management, water purification, gas purification, and biological treatments will pave the way for their promising features and realize their future prospects.

Flower-like molybdenum disulfide decorated ZIF-8-derived nitrogen-doped dodecahedral carbon for electro-catalytic degradation of phenol

In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS₂@ZNC contributed to the exposure of more edge-active sites of MoS₂. At the same time, Mo⁴⁺ and Mo⁶⁺ co-existed in MoS₂@ZNC, which promoted the generation of H₂O₂ and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS₂ loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS₂ and ZNC affected the structure and properties of MoS₂@ZNC composites. Moreover, the electrochemical performance of prepared MoS₂@ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS₂@ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS₂@ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS₂@ZNC.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Fabrication of Gum Arabic-Graphene (GGA) Modified Polyphenylsulfone (PPSU) Mixed Matrix Membranes: A Systematic Evaluation Study for Ultrafiltration (UF) Applications

In the current work, a Gum, Arabic-modified Graphene (GGA), has been synthesized via a facile green method and employed for the first time as an additive for enhancement of the PPSU ultrafiltration membrane properties. A series of PPSU membranes containing very low (0–0.25) wt.% GGA were prepared, and their chemical structure and morphology were comprehensively investigated through atomic force microscopy (AFM), Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FESEM). Besides, thermogravimetric analysis (TGA) was harnessed to measure thermal characteristics, while surface hydrophilicity was determined by the contact angle. The PPSU-GGA membrane performance was assessed through volumetric flux, solute flux, and retention of sodium alginate solution as an organic polysaccharide model. Results demonstrated that GGA structure had been successfully synthesized as confirmed XRD patterns. Besides, all membranes prepared using low GGA content could impart enhanced hydrophilic nature and permeation characteristics compared to pristine PPSU membranes. Moreover, greater thermal stability, surface roughness, and a noticeable decline in the mean pore size of the membrane were obtained.