A sol-gel-based amino functionalized fiber for immersed solid-phase microextraction of organophosphorus pesticides from environmental samples

Needle trap device technique: From fabrication to sampling

Needle Trap Device (NTD) as a novel, versatile, and eco-friendly technique has played an important role in analytical and environmental chemistry. The distinctive role of this interdisciplinary technique can be defended through the sampling and analysis of biological samples and industrial pollutants in gaseous and liquid environments. In recent years, significant efforts have been made to enhance the performance of the needle trap device resulting in the development of novel extraction routes by various packing materials with improved selectivity and enhanced adsorption characteristics. These achievements can lead to the facilitated pre-concentration of desired analytes. This review tries to have a comparative and comprehensive survey of the three important areas of NTD technique: I) Fabrication and preparation procedures of NTDs; II) Sampling techniques of pollutants using NTDs; and III) Employed materials as adsorbents in NTDs. In the packing-material section, the commercial and synthetic adsorbents such as carbon materials, metal-organic frameworks, aerogel, and polymers are considered. Furthermore, the limitations and potential areas for future development of the NTD technique are presented.

Fabrication of MXene/chitosan/polyurea nanocomposite decorated on a graphenized substrate for electro-enhanced solid-phase microextraction of diclofenac followed by its determination using differential pulse voltammetry

A novel solid-phase microextraction fiber based on MXene-chitosan-polyurea (MXene/CS/EPPU) nanocomposite decorated on a graphenized pencil lead fiber (MXene/CS/EPPU/GPLF) was prepared and utilized for electro-enhanced solid-phase microextraction (EE-SPME) of diclofenac (DCF) in biological samples. After extraction and desorption of DCF, it was determined by differential pulse voltammetry (DPV). For this purpose, the working electrode was prepared by deposition of the mentioned MXene/CS/EPPU nanocomposite onto the graphenized pencil lead. The synthesized SPME fiber was characterized using scanning electron microscopy and X-ray diffraction techniques. The effect of various parameters influencing the extraction and the desorption process were investigated, including applied voltage in the extraction and desorption steps, extraction and desorption times, and pH. The developed method exhibited a rather wide linearity in the range 2-1200 ng mL-1 (R2 = 0.985) for the determination of DCF in plasma samples. The limit of detection and the limit of quantification for plasma samples were estimated to be 0.58 and 1.9 ng mL-1 based on the 3Sb/m and 10Sb/m definitions, respectively. The method's accuracy and applicability have been evaluated by the analysis of plasma samples, leading to the relative recoveries in the range 87.0% and 98.0% with the relative standard deviations lower than 3.1%.

Investigation of organophosphorus (OPs) compounds by a needle trap device based on mesoporous organo-layered double hydroxide (organo-LDH)

Organophosphorus (OPs) compounds can endanger human health and the environment by inhibiting the acetylcholinesterase enzyme. But these compounds have been widely used as pesticides due to their effectiveness against all kinds of pests. In this study, a Needle Trap Device (NTD) packed with mesoporous organo-layered double hydroxide (organo-LDH) material and coupled with gas chromatography-mass spectrometry (GC-MS) was employed for the sampling and analysis of OPs compounds (diazinon, ethion, malathion, parathion, and fenitrothion). In this way, the [magnesium-zinc-aluminum] layered double hydroxide ([Mg-Zn-Al] LDH) modified with sodium dodecyl sulfate (SDS) as a surfactant was prepared and characterized by FT-IR, XRD, BET, and FE-SEM, EDS, and elemental mapping techniques. Then, various parameters such as relative humidity, sampling temperature, desorption time, and desorption temperature were evaluated by the mesoporous organo-LDH:NTD method. The optimal values of these parameters were determined using response surface methodology (RMS) and central composite design (CCD). The optimal temperature and relative humidity values were obtained as 20 °C and 25.0%, respectively. On the other hand, the desorption temperature and time values were in the range of 245.0-254.0 °C and 5 min, respectively. The limit of detection (LOD) and limit of quantification (LOQ) were reported in the range of 0.02-0.05 mg m^-3 and 0.09-0.18 mg m^-3, respectively, which shows the high sensitivity of the proposed method compared to the usual methods. The repeatability and reproducibility of the proposed method (by calculating the relative standard deviation) was estimated in the range of 3.8-10.10 which indicates the acceptable precision of the organo-LDH:NTD method. Also, the desorption rate of the stored needles at 25 °C and 4 °C, was determined to be 86.0% and 96.0%, respectively after 6 days. The results of this study proved that the mesoporous organo-LDH:NTD method can be utilized as a fast, simple, environmentally friendly, and effective method for sampling and determining OPs compounds in the air.

Zr-based metal-organic framework incorporated polystyrene nanocomposite as a novel sorbent for ultrasound assisted-thin film microextraction of organophosphorus pesticides from complex samples

In this work, a novel ultrasound assisted-thin film microextraction (USA-TFME) method has been developed to determine organophosphorus pesticides (OPPs) in some fruits and vegetables samples followed by gas chromatography. In this regards, a novel nanocomposite (NC) was prepared by incorporation of zirconium-based metal-organic framework (MOF) into polystyrene (UiO-66/PS) and used as an efficient thin film. The effect of MOF doping level into UiO-66/PS NC and also the effective parameters influencing the TFME method has been studied. Based on the method validation, limits of detection were in the range of 1.5 to 3 µg kg^-1. The intra-day precision, inter-day precision and inter-sorbent precision were in the range of 5.1 to 7.2, 5.3 to 10.2 and 4.6 to 7.3 %, respectively. The developed method was prosperously applied for determination of OPPs in some fruit and vegetable samples, leading to the acceptable relative recoveries in the range of 87.8% to 96.3%.

Development of a bimetal-organic framework-polypyrrole composite as a novel fiber coating for direct immersion solid phase microextraction in situ supercritical fluid extraction coupled with gas chromatography for simultaneous determination of furfurals in dates

A new, simple, hyphenated technique couples supercritical fluid extraction and direct immersion SPME with GC-FID (SFE-DI-SPME-GC-FID) for the determination of 2-furaldehyde (2-F) and 5-hydroxymethylfurfural (5-HMF) in solid foods. A bimetal-organic framework-polypyrrole composite was grown in situ on stainless steel wire in solution and used as a novel solid phase microextraction (SPME) fiber coating. A central composite design based on a 2^n-1 fractional factorial experimental design was employed to optimize the SFE conditions for 2-F and 5-HMF at a pressure of 325 atm, temperature of 35 °C, dynamic extraction time of 15 min, and modifier volume of 150 μL. Also, the factors related to the solid-phase microextraction method including ionic strength, desorption time and temperature together with extraction time and temperature were optimized prior to the gas chromatography analysis. Under the optimal conditions, the limits of detection were in the range of 1.28-5.92 μg kg^-1. This method showed good linearity for 2-F and 5-HMF in the ranges of 40-50 000 and 4540-500 000 μg kg^-1, respectively, with coefficients of determination more than 0.9995. Single fiber repeatability and fiber-to-fiber reproducibility were less than 6.76% and 9.12%, respectively. The new method was successfully utilized to determine the amounts of 2-F and 5-HMF in the real solid food matrix without the need for tedious pretreatments.

Immobilization of synthesized phenyl-enriched magnetic nanoparticles in a fabricated Y-Y shaped micro-channel containing microscaled hedges as a microextraction platform

In this survey, a reliable and applicable Y-Y shaped micro-channel in a microfluidic device was designed and manufactured. A number of micro-scaled hedges were precisely fabricated inside the micro-channel to facilitate the immobilization of synthesized core-shell Fe₃O₄@SiO₂ magnetic nanoparticles (MNPs), functionalized by triethoxyphenylsilane (TEPS) by sol-gel technique. Both sample and reagents were introduced into the microfluidic device by a syringe pump to perform the extraction and desorption steps. The functionalized MNPs were characterized by transmission electron microscopy, X-ray diffraction spectroscopy and Fourier transform infrared spectroscopy. By adopting the strategy of extraction-on-chip using this microfluidic device, we were benefited from implementing the entire analyses with the minimum amount of desorbing solvent, MNPs, and aqueous/fruit juice samples. In contrast to dispersive solid phase extraction, dispersion of MNPs during experiment is prevented by fabrication of micro-scaled hedges in the micro-channel. Consequently the stabilized MNPs are reused for the entire runs. The microfluidic device was successfully exploited as an efficient extracting plateau to evaluate the extraction/desorption capability in analysis of some organophosphorus pesticides (OPPs) as model compounds. Our results indicate that the functionalization of Fe₃O₄@SiO₂ with TEPS, improved their extraction capability due to the existence of phenyl and hydroxyl groups for more efficient π-π and hydrogen bonding interactions. Eventually, μL-scale of the organic solvent was injected into a gas chromatography-mass spectrometry system. The limits of detection (3S_b) and quantification (10S_b) for the OPPs were 0.03-0.1 and 0.1-0.35 ng mL^-1, respectively. In addition, the interday and intraday precisions were lower than 5.3% (n = 3). The obtained recovery was 95-99% for water samples and 88-96% for fruit juice samples while satisfactory regression coefficients of 0.9949-0.9991, could be achieved.

Solid-phase extraction using chloropropyl functionalized sol-gel hybrid sorbent for simultaneous determination of organophosphorus pesticides in selected fruit samples

A new sol-gel hybrid methyltrimethoxysilane-chloropropyltriethoxysilane was prepared as sorbent for solid-phase extraction. The extraction efficiency of the prepared sol-gel hybrid methyltrimethoxysilane-chloropropyltriethoxysilane was assessed by using three selected organophosphorus pesticides, namely, chlorpyrifos, profenofos, and malathion. Gas chromatography-mass spectrometry was used for detection of organophosphorus pesticides. Several vital parameters were optimized to identify the best extraction conditions. Under the optimum extraction conditions, solid-phase extraction-methyltrimethoxysilane-chloropropyltriethoxysilane method showed good linearity range (0.05-1 μg/mL) with coefficient of determination more than 0.995. The limits of detection obtained were in the range of 0.01-0.07 μg/mL and limits of quantification ranging from 0.03 to 0.21 μg/mL. The limits of detection obtained for the developed method were 2.3-6.5× lower than the limits of detection of commercial octadecyl silica sorbent. Real samples analysis was carried out by applying the developed method on red apple and purple grape samples. The developed method exhibited good recoveries (88.33-120.7%) with low relative standard deviations ranging from 1.6 to 3.3% compared to commercial octadecyl silica sorbent, which showed acceptable recoveries (70.3-100.2%) and relative standard deviations (6.3-8.8%). The solid-phase extraction-methyltrimethoxysilane-chloropropyltriethoxysilane method is presented as an alternative extraction method for determination of organophosphorus pesticides.

Application of fabric phase sorptive extraction with gas chromatography and mass spectrometry for the determination of organophosphorus pesticides in selected vegetable samples

In the present work, a high-efficiency and solvent minimized microextraction technique, fabric phase sorptive extraction followed by gas chromatography and mass spectrometry analysis is proposed for the rapid determination of four organophosphorus pesticides (terbufos, malathion, chlorpyrifos, and triazofos) in vegetable samples including beans, tomato, brinjal, and cabbage. Fabric phase sorptive extraction combines the beneficial features of sol-gel derived microextraction sorbents with the rich surface chemistry of cellulose fabric substrate, which collectively form a highly efficient microextraction system. Fabric phase sorptive extraction membrane, when immersed directly into the sample matrix, may extract target analytes even when high percentage of matrix interferents are present. The technique also greatly simplifies sample preparation workflow. Most important fabric phase sorptive extraction parameters were investigated and optimized. The developed method displayed good linearity over the concentration range 0.5-500 ng/g. Under optimum experimental conditions, the limits of detection were found in the range of 0.033 to 0.136 ng/g. The relative standard deviations for the extraction of organophosphorus pesticides were < 5%. Subsequently, the new method was applied to beans, tomato, brinjal, and cabbage samples. The results from the real sample analysis indicate that the method is green, rapid, and economically feasible for the determination of organophosphorus pesticides in vegetable samples.

Silica-based magnetic hybrid nanocomposite for the extraction and preconcentration of some organophosphorus pesticides before gas chromatography

The precise control of pesticide residues in foodstuffs depends significantly on the clean extraction of analytes using specifically designed separation methods. In this study, a one-pot sol-gel process was used for the preparation of a magnetic hybrid silica gel tetraethylortho silicate-cyanopropyltriethoxy silane nanocomposite. The prepared material was characterized using energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, single-point specific surface area, and scanning electron microcopy. The synthesized magnetic hybrid material was used as a solid phase extraction sorbent for the extraction and preconcentration of some organophosphorus pesticides before gas chromatography with a microelectron capture detector. The performance of the proposed magnetic solid-phase extraction technique was validated by linearity (0.05-2 ng/mL), correlation coefficients (r²  = 0.9993-0.9997), limit of detection (0.02-0.06 ng/mL, S/N = 3, n = 3), and intraday (RSD = 1.5-8.7%, n = 3) and interday precision (RSD = 5.5-9.3%, n = 12), while the recovery in real samples and equilibrium adsorption capacity was 72.02-103.84% and 8-20 mg/g, respectively. The magnetic solid-phase extraction based on the hybrid nanocomposite revealed a high enrichment factor, an appropriate dynamic range, and great absorptive ability toward the selected organophosphorus pesticides spiked in real water samples.

Rapid and sensitive on-line monitoring 6 different kinds of volatile organic compounds in aqueous samples by spray inlet proton transfer reaction mass spectrometry (SI-PTR-MS)

Rapid and sensitive monitoring of volatile organic compounds (VOCs) in aqueous samples is very important to human health and environmental protection. In this study, an on-line spray inlet proton transfer reaction mass spectrometry (SI-PTR-MS) method was developed for the rapid and sensitive monitoring of 6 different kinds of VOCs, namely acetonitrile, acetaldehyde, ethanol, acetone, aether, and methylbenzene, in aqueous samples. The response time, limit of detection (LOD), and repeatability of the SI-PTR-MS system were evaluated. The response of the SI-PTR-MS was quite rapid with response times of 31-88 s. The LODs for all these VOCs were below 10 μg/L. The LOD of methylbenzene was 0.9 μg/L, much lower than the maximum contaminant level (MCL) in drinking water. The repeatability of this method was evaluated with 5 replicate determinations. The relative standard deviations (RSDs) were in the range of 0.8-3.1%, indicating good repeatability. To evaluate the matrix effects, the SI-PTR-MS system was employed for on-line monitoring of these 6 VOCs in different aqueous matrices, including lake water, tap water, and waste water. The relative recoveries were in the range of 94.6-106.0% for the lake water, 96.3-105.6% for the tap water, and 95.6-102.9% for the waste water. The results indicate that the SI-PTR-MS method has important application values in the rapid and sensitive monitoring of VOCs in these aqueous samples. In addition, the effect of salt concentration on the extracting efficiency was evaluated. The results showed that the LOD of the SI-PTR-MS could be further decreased by changing the salt concentration.

Application of nanocomposite-based sorbents in microextraction techniques: a review

This review provides a general overview of the recent trends for the preparation of nanocomposites and their applications in microextraction techniques.

Magnetic solid-phase extraction based on modified ferum oxides for enrichment, preconcentration, and isolation of pesticides and selected pollutants

Recently, a simple, rapid, high-efficiency, selective, and sensitive method for isolation, preconcentration, and enrichment of analytes has been developed. This new method of sample handling is based on ferum oxides as magnetic nanoparticles (MNPs) and has been used for magnetic solid-phase extraction (MSPE) of various analytes from various matrices. This review focuses on the applications of modified ferum oxides, especially modified Fe3O4 MNPs, as MSPE adsorbent for pesticide isolation from various matrices. Further perspectives on MSPE based on modified Fe3O4 for inorganic metal ions, organic compounds, and biological species from water samples are also presented. Ferum(III) oxide MNPs (Fe2O3) are also highlighted.

New trends in sample preparation techniques for environmental analysis

Environmental samples include a wide variety of complex matrices, with low concentrations of analytes and presence of several interferences. Sample preparation is a critical step and the main source of uncertainties in the analysis of environmental samples, and it is usually laborious, high cost, time consuming, and polluting. In this context, there is increasing interest in developing faster, cost-effective, and environmentally friendly sample preparation techniques. Recently, new methods have been developed and optimized in order to miniaturize extraction steps, to reduce solvent consumption or become solventless, and to automate systems. This review attempts to present an overview of the fundamentals, procedure, and application of the most recently developed sample preparation techniques for the extraction, cleanup, and concentration of organic pollutants from environmental samples. These techniques include: solid phase microextraction, on-line solid phase extraction, microextraction by packed sorbent, dispersive liquid-liquid microextraction, and QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe).

Differential pulse voltammetric determination of methyl parathion based on multiwalled carbon nanotubes-poly(acrylamide) nanocomposite film modified electrode

A sensitive electrochemical differential pulse voltammetry method was developed for detecting methyl parathion based on multiwalled carbon nanotubes-poly(acrylamide) (MWCNTs-PAAM) nanocomposite film modified glassy carbon electrode. The novel MWCNTs-PAAM nanocomposite, containing high content of amide groups, was synthesized by PAAM polymerizing at the vinyl group functionalized MWCNTs surface using free radical polymerization. The MWCNTs-PAAM nanocomposite was characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis and scanning electron microscopy. Electrochemical behavior and interference studies of MWCNTs-PAAM/GCE for methyl parathion were investigated. The experimental results demonstrated that the MWCNTs-PAAM/GCE exhibited a high adsorption and strong affinity toward methyl parathion compared with some metal ions and nitroaromatic compounds, which exist in environmental samples. The adsorbed amount of methyl parathion on the MWCNTs-PAAM/GCE approached the equilibrium value upon 5 min adsorption time. A linear calibration curve for methyl parathion was obtained in the concentration range from 5.0×10(-9) to 1.0×10(-5) mol L(-1), with a detection limit of 2.0×10(-9) mol L(-1). The MWCNTs-PAAM/GCE was proved to be a suitable sensing tool for the fast, sensitive and selective determination of methyl parathion in environmental water samples.

Preparation and Application of Multiwalled Carbon Nanotubes Microspheres/Poly(ethylene glycol) Coated Fiber for SPME

In this context,the sol-gel approach to the preparation of solid-phase microextraction fibers is applied for extracting of benzene and mathanol from enviromental water samples.Therefore,two different substances such as PEG and MWCNTs is added to the coating.PEG/MWCNTs fibers are prepared using sol-gel technology as a process.MWCNTs is immobilized as microspheres in the pores of PEG coating using Scanning Electron Microscope(SEM).At last, the results show that PEG/MWCNTs fibers are higher extraction efficiency than PEG fibers. Several factors also are considered and optimized,such as extraction temperature, extraction time,inoic strength,stirring speed,desorption temperature and desorption time.LOD(S/N=5) and LOQ(S/N=10) for sol-gel PEG/MWCNTs fibers for extraction of benzene and methanol is 1µg/L and 2µg/L, linear range is 2-2800µg/mL and 2-3000µg/L, linear correlation coefficient is 0.9937 and 0.9940, the RSDs (RSD, n = 7) is 5.1%. and 6.7%, respectively.