Arsenic and mercury in bird feathers: Identification and quantification of inorganic pesticide residues in natural history collections using multiple analytical and imaging techniques

Evaluating washing techniques to eliminate external contamination of trace elements in bat fur and bird feathers

Non-invasive proxies, such as fur and feathers, are likely to be increasingly used to assess the potential exposure of chemicals, including trace metals and metalloids. However, the amount of external contamination is usually unknown, and there is no standard method for removing external contamination of trace metals in fur or feathers. To date, 40 % of studies published related to the measurement of trace metal levels in fur or the hair of non-human mammals and 24 % of studies in feathers do not state any washing methods or did not wash the samples before analysis. We assessed three washing techniques to remove external contamination of arsenic (As), lead (Pb), and zinc (Zn) from bat fur. We selected the three most frequently used fur washing methods from literature. To test these methods, fur samples from great flying foxes (Pteropus neohibernicus neohibernicus, n=15 individuals) from Papua New Guinea preserved over eight decades (AMNH, USA) were used. Percentages of trace metal removed are 87.19 % (SD= 12.28), 92.99 % (SD= 5.5) and 88.57 % (SD= 9.33) for As, 54.72 % (SD= 31.64), 55.89 % (SD= 37.87), and 53.93 % (SD= 41.28) for Pb, and 74.03 % (SD= 22.96), 22.93 % (SD= 73), and 24.95 % (SD= 49.5) for Zn using M2, M3, and M4, respectively. We also assessed four washing techniques to remove external contamination of arsenic (As), mercury (Hg), and zinc (Zn) from bird feathers. We identified the four most prevalent washing techniques in the literature used for feathers. We used feathers from the great horned owl (Bubo virginianus) and the great blue heron (Ardea herodias) to test these methods. Percentages of trace metal removed are 34.35 % (SD= 44.22), 69.22 % (SD= 36.5), 62.59 % (SD= 48.37), and 80.89 % (SD= 14.54) for As, 66.97 % (SD= 13.26), 29.4 % (SD= 67.06), 49.68 % (SD= 42.33), and 28.88 % (SD= 69) for Hg, and <0 % (SD= 80.1), 0 % (SD= 29.55), 11.23 % (SD= 47.73), and 57.09 % (SD= 21.2) for Zn using M2, M3, M4, and M5, respectively. This study shows the importance of washing fur and feather samples prior to trace metals analyses in ecotoxicology and biomonitoring studies.

A review on the applicability of adsorption techniques for remediation of recalcitrant pesticides

Pesticide has revolutionised the agricultural industry by reducing yield losses and by enhancing productivity. But indiscriminate usage of such chemicals can negatively impact human health and ecosystem balance as certain pesticides can be recalcitrant in nature. Out of some of the suggested sustainable techniques to remove the pesticide load from the environment, adsorption is found to be highly efficient and can also be implemented on a large scale. It has been observed that natural adsorption that takes place after the application of the pesticide is not enough to reduce the pesticide load, hence, adsorbents like activated carbon, plant-based adsorbents, agricultural by-products, silica materials, polymeric adsorbents, metal organic framework etc are being experimented upon. It is becoming increasingly important to choose adsorbents which will not leave any secondary pollutant after treatment and the cost of production of such adsorbent should be feasible. In this review paper, it has been established that certain adsorbent like biochar, hydrochar, resin, metal organic framework etc can efficiently remove pesticides namely chlorpyrifos, diazinon, 2,4-Dichlorophenoxyacetic Acid, atrazine, fipronil, imidacloprid etc. The mechanism of adsorption, thermodynamics and kinetic part have been discussed in detail with respect to the pesticide and adsorbent under discussion. The reason behind choosing an adsorbent for the removal of a particular pesticide have also been explained. It is further highly recommended to carry out a cost analysis before implementing an absorbent because inspite of its efficacy, it might not be cost effective to use it for a particular type of pesticide or contaminant.

Contamination, Source Apportionment, and Health Risk Assessment of Heavy Metals in Farmland Soils Surrounding a Typical Copper Tailings Pond

Tailings resulting from mining and smelting activities may cause soil heavy-metal pollution and harm human health. To evaluate the environmental impact of heavy metals from tailings on farmland soils in the surrounding area, heavy metals (As, Cd, Cr, Cu, Ni, Pb, and Zn) in tailings and farmland soils in the vicinity of a typical copper tailings pond were analyzed. Contamination status, potential sources, and health risks for farmland soils were investigated. The results showed that the tailings contained a high concentration of Cu (1136.23 mg/kg). The concentrations of Cd and Cu in the farmland soils exceeded the soil quality standard. The geoaccumulation index (I_geo) indicated that the soils were moderately polluted by Cu and Cd, and slightly polluted by Ni, Cr, and Zn. The absolute principal component scores-multiple linear regression (APCS-MLR) model was applied for source apportionment. The results showed that tailings release is the main source of soil heavy-metals contamination, accounting for 35.81%, followed by agricultural activities (19.41%) and traffic emission (16.31%). The health risk assessment suggested that the children in the study region were exposed to non-carcinogenic risks caused by As, while the non-carcinogenic risk to adults and the carcinogenic risk to both adults and children were at acceptable levels. It is necessary to take effective measures to control heavy-metal contamination from tailings releases to protect humans, especially children, from adverse health risks.

Refining the diagnostics of non-point source metals pollution to urban lakes based on interaction normalized PMF coupled with Bayesian network

Spatiotemporal variability complicates source apportionment of metals in urban lakes, especially when rainfall drives urban non-point source pollution. As, Cd, Cr, Pb, Hg, Ag, Co, Cu, Fe, Mn, Ni, Sb, Sr and Zn concentrations in 648 water samples collected before and after rain in 6 urban lakes of Beijing, China were determined during 2013-2015. The response of metals concentrations after rain to the interaction between rainfall and antecedent dry days was significant. Metals concentrations were normalized pursuant to the interaction effect as the input of positive matrix factorization (PMF) to develop the interaction normalized-PMF (IN-PMF). Four primary pollution sources were diagnosed. Sediment release was considered to be the main source of Fe, Co and Ni independent of rainfall. Hg, As and some Cr associated with pesticides and fertilizers were likely to come from soil erosion and runoff from green space. It is probable that road runoff was the dominant source for heavy metals related to traffic emissions, including Pb, Cd, Cu, Sb, Mn and Zn. Cr, Sr and some Cu and Zn as key elements of rooftops can be regarded as from roof runoff. The IN-PMF lowered roof and road runoff contributions and raised the contribution of soil erosion from green space, with Pb, Sb, Cu, Zn, Cd and Mn increasing by 15.9%, 10.7%, 13.1%, 12.2%, 13.3% and 16.8%. The results shed more light on the stormwater runoff pollution mitigation on impervious surfaces and metals enrichment problems in infiltration soil on green space in the low impact development (LID) setting. The Bayesian network revealed the spatial variability of transport and fate of metal elements from land surfaces to urban lakes, supplementing the secondary pollution sources from different land use. This study will provide new insights for source apportionment of non-point source pollution under the background of sponge city construction.

Removal of Pesticides from Waters by Adsorption: Comparison between Synthetic Zeolites and Mesoporous Silica Materials. A Review

Pesticides are pollutants found in wastewater due to increasing agricultural activities over the years. Inappropriate dosing of pesticides results in the dispersal of active ingredients in the environment. The complete removal of pesticides from wastewater is an immediate concern due to their high toxicity and mobility. At present, adsorption is one of the most widely used methods for pesticide removal, in which synthetic zeolites and mesoporous silica materials are extensively applied. This article presents a systematic and comparative review of the applications and comparison of these adsorbents, based on the data reported in the literature. The paper summarizes the information collected from various studies, including the type of adsorbents and pesticides used, experimental conditions, and results of each work. The studies analyzed were laboratory-based and show potential advantages for the treatment of pesticide-bearing waters using functionalized and unfunctionalized synthetic zeolites and mesoporous silica materials. As a whole, functionalized materials are reported to exhibit better removal performance for different pesticides than conventional materials. It is expected that the results of this review will help researchers to establish a powerful strategy for the abatement of pesticides in wastewater.

Reconstructing avian mercury concentrations through time using museum specimens from New York State

We examined how variation in MeHg concentrations through time is reflected in birds, a taxon commonly used as a biological indicator of ecosystem health. Using museum specimens collected from 1880 to 2016, we measured feather MeHg concentrations in six species of birds that breed in New York State and have distinct dietary and habitat preferences. We predicted that MeHg concentrations in feathers would mirror Hg emission patterns in New York State and increase through time until 1980 then decrease thereafter in response to increased regulation of anthropogenic Hg emissions. We found that MeHg concentrations increased with δ¹⁵N, and that MeHg feather concentrations for some individuals from four of the six species examined exceeded concentrations known to cause negative sublethal effects in birds. In contrast to our prediction, MeHg concentrations in feathers did not parallel global or local Hg emissions through time and varied by species, even after controlling for possible changes in diet and habitat. MeHg concentrations varied substantially within species and individual specimens, suggesting that high within-individual variation in feather MeHg concentrations caused by spatiotemporal variation in molt, environmental Hg exposure, or mobility decoupling Hg uptake from breeding sites, may obscure trends in MeHg through time. Our study provides a unique assessment of feather MeHg in six species not typically analyzed using this retrospective approach.

Historical patterns in mercury exposure for North American songbirds

Methylmercury (MeHg) is a global environmental contaminant that poses significant risks to the health of humans, wildlife, and ecosystems. Assessing MeHg exposure in biota across the landscape and over time is vital for monitoring MeHg pollution and gauging the effectiveness of regulations intended to reduce new mercury (Hg) releases. We used MeHg concentrations measured in museum specimen feathers (collected between 1869 and 2014) and total Hg concentrations (as a proxy for MeHg) of feathers sampled from wild birds (collected between 2008 and 2017) to investigate temporal patterns in exposure over approximately 150 years for North American songbirds. For individual species, we found greater concentrations for samples collected post-2000 compared to those collected during historic times (pre-1900) for six of seven songbird species. Mean feather concentrations measured in samples collected post-2000 ranged between 1.9 and 17 times (mean 6.6) greater than historic specimens. The proportion of individual songbirds with feather concentrations that exceeded modeled toxicity benchmarks increased in samples collected after 1940. Only 2% of individual songbirds collected prior to 1940 had feather concentrations greater than 2.4 μg/g (a toxicity benchmark related to a 10% decrease in nest success) compared to 35% of individuals collected post-1940. Many species included in this study have a vulnerable or near-threatened conservation status, suggesting recovery actions are needed to address mercury pollution.

Non-invasive biomonitoring of mercury in birds near thermal power plants: lessons from Maharashtra, India

Thermal power plants (TPPs) have emerged as a major source of air, water, and soil pollution because of the presence of many toxic metals. The presence of mercury (Hg) in fly ash has proven to be toxic in nature because of its tendency to get bioaccumulated and biomagnified in the food chain. The aim of the present study was to understand the presence of toxic Hg in the feathers of wetland birds undertaking the study around a TPP located in Nagpur, India. Local wetland birds especially cattle egrets, heron, and Moorhen were commonly observed dwelling close to fly ash ponds for various purposes (roosting, breeding, feeding, etc.). Samples of fly ash, soil, water, plants, and bird feather were collected, cleaned, and processed for Hg analysis. A mercury analyzer was used to assess the concentration of toxic levels of Hg in samples. Our results reflect leaching of Hg in soil and uptake by plant samples, whereas in water, ash, and bird feather samples concentrations of Hg were fairly below the prescribed limits (World Health Organization). A non-invasive method for understanding the mercury concentration in wetland birds has been established as a potential important monitoring tool to track the fate of toxic metal Hg in the food chain. In summary, our results indicate fairly low Hg levels in feather samples projecting non-invasive biomonitoring as a promising strategy. The study also suggests that a comprehensive monitoring action plan in place for Hg and other toxic metals in the food chain that comes from TPP will be efficient to avoid any pitfalls. Graphical abstract.

Investigation on the 2D-Distribution of Metallic Elements after Hair Dyeing

Long-term use of hair dyes has potential effects on metal content in hair. However, little research dissects the specific distribution and composition variations of the metal after dyeing. In this study, we investigated the morphological change and metallic elements content variation after dyeing. The results showed that the concentration of essential metal elements decreased, among which the Ca, K, and Na decreased sharply even above 50%. As for the heavy metal, the most significant observation is that Pb increased almost by five times after dyeing. Besides, it revealed, using scanning electron microscope coupled with energy-dispersive X-ray spectroscopy (SEM-EDS), that Pb concentrated at the outer layer of the hair. In addition, two-dimensional proton-induced X-ray emission (2D-PIXE) was applied to analyze the distribution of metallic elements along the longitudinal and cross section of the hair. The results showed that Ca and Zn distributed evenly in the hair along the longitudinal and cross section. It is the first time that 2D-PIXE is applied to analyze the metallic distribution in the hair. This method exhibits high sensitivity and can be widely used in the environmental and medical field to analyze the distribution of metallic elements.

Monitoring of arsenic, mercury and organic pesticides in particulate matter, ambient air and settled dust in natural history collections taking the example of the Museum für Naturkunde, Berlin

Chemical compounds such as arsenic, mercury and organochlorine pesticides have been extensively used as preventive and curative conservation treatments for cultural and biological collections to protect them from pest and mould infestations. Most of the aforementioned compounds have been classified as carcinogenic, mutagenic and teratogenic and represent a health risk for staff exposed to contaminated objects. A total of 30 compounds were analysed in settled dust, particulate matter and surrounding air collected at several locations in the natural history collections and adjacent rooms of the Museum für Naturkunde, Berlin (MfN, Natural History Museum, Berlin, Germany). Gas chromatography and mass spectrometry techniques were used to quantify dichlorodiphenyltrichloroethane (2,4'-DDT; 4,4'-DDT) and their metabolites (2,4'-DDE; 4,4'-DDE; 2,4'-DDD; 4,4'-DDD), hexachlorobenzene (HCB), 3 isomers of hexachlorocyclohexanes (α-HCH, β-HCH, γ-HCH), the degradation product of γ-HCH with similar toxicological profile, gamma-pentachlorocyclohexene (γ-PCH) and pentachlorophenol (PCP). Atomic absorption spectrometry was used to analyse arsenic and mercury. In order to assess the pathways of contamination with biocides in dust, formations of particulate matter during individual daily work activities, particle number concentrations (PNCs) were measured. Heavy element concentrations found at the MfN were higher than the organochlorine compounds. The maximum concentration of arsenic and mercury in dust was 3507 mg/kg and 32 mg/kg, respectively, and in air, 48 ng/m³ and 1.6 ng/m³, respectively. The maximum concentration of the sum of DDTs in dust was 2 mg/kg (not detected in air); for PCP, the maximum levels in dust and air were 0.65 mg/kg and 10 ng/m³, respectively; for γ-HCH, 130 mg/kg and 320 ng/m³, respectively; and finally, for γ-PCH, 2.1 mg/kg and 230 ng/m³, respectively. Twelve PNC measurements were obtained from seven different collection rooms and the diaries of the participants' activities. PNCs were highly variable between work activities. Higher personal PNCs were associated with activities like opening storage boxes with prepared animals, reading old books or handling objects. This study has shown that taxidermic objects in museum collection may be a cause for arsenic exposure during handling of objects.

Retrospective biomonitoring of mercury and other elements in museum feathers of common kestrel Falco tinnunculus using instrumental neutron activation analysis (INAA)

This study examines the potential to use instrumental neutron activation analysis (INAA) to explore temporal and geographical variation in exposure to heavy metals and other selected elements in common kestrel Falco tinnunculus using feathers from a natural history collection. The study gathered samples of two breast feathers from each of 16 adult male kestrel specimens from Naturalis Biodiversity Centre, collected in The Netherlands between 1901 and 2001. Feather samples were analysed for more than 50 elements, using INAA at the Reactor Institute Delft. Results (in mg/kg dw) were transformed into ratios of milligram of element per millimetre of feather length. The distribution of the mass fractions and ratios was plotted for each element against time and by geographical area. Observed mass fractions and/or ratios are discussed for selected elements (Hg, Cd, Zn, Pt, Pd, Se, Al, Rb, As, Sb, Cr, V, Cl, Br) known to have, at certain concentrations, adverse effects on raptors. Some samples show mass fractions of certain elements (Cr, Cd, Se, As) above levels known to have adverse effects. We conclude that the analysis of museum feathers using INAA provides reference values for concentrations of selected elements, including those of high societal concern such as Hg and Cd, against which to assess concentrations of these elements in feathers of present-day living raptor populations.