Dummy-template molecularly imprinted micro-solid-phase extraction coupled with high-performance liquid chromatography for bisphenol A determination in environmental water samples

Simultaneous and sensitive detection of methylparaben and its metabolites by using molecularly imprinted solid-phase microextraction fiber array technique

BACKGROUND

Methylparaben (MP), a commonly used antibacterial preservative, is widely used in personal care products, foods, and pharmaceuticals. MP and its metabolites are easy to enter the water environment, and their exposure and accumulation have negative effects on the ecological environment and human health, and have endocrine disrupting activity and potential physiological toxicity. It is still the primary issue of environmental analysis and ecological risk assessment to develop simple and reliable methods for simultaneous sensitive detection of these compounds in environmental water.

RESULTS

In this paper, a flexible molecularly imprinted fiber array strategy is proposed for simultaneous enrichment and detection of trace MP and its four main metabolites. The experimental results showed that the three-fiber imprinted fiber array constructed by MP imprinted fiber had the best effect on the simultaneous enrichment of these five target analytes. The enrichment capacity of the imprinted fiber array was 214-456 times, 314-1201 times and 38-685 times that of commercial PA, PDMS and PDMS/DVB fiber arrays, respectively. The limit of detection (LOD) of this method was 0.033 μg L-1. The spiked recovery rate was 86.78-113.96 %, and RSD was less than 9.17 %. In addition, this molecularly imprinted SPME fiber array has good stability, long service life and can be used repeatedly at least 100 times.

SIGNIFICANCE

This molecularly imprinted fiber array strategy can flexibly assemble different molecularly imprinted SPME fibers together, effectively improve the enrichment ability and detection sensitivity, and achieve simultaneous selective enrichment and detection of several analytes. This is an easy, efficient and reliable method for monitoring several trace analytes simultaneously in intricate environmental matrices.

Flexible molecularly imprinted fiber library for the metabolic analysis of bisphenol F and ecological risk evaluation

Bisphenol F (BPF) has evoked global attentions due to its ubiquity and detrimental effects. Herein, a flexible molecularly imprinted fiber library was firstly proposed for the metabolic analysis of BPF in aquatic ecosystems. The library includes flexible single fibers and fiber arrays to precisely identify BPF and its metabolites with a wide range of polarities. Compared to commercial polyacrylate, the performance increased 11.56-570.98-fold. The adsorption capacity and the LogKow value were positively related. These arrays were used for the acquisition of environmental metabolomics data from aquatic ecosystems. In-depth data analysis showed that risk quotient was lower than 0.76, and bioaccumulation factor was lower than 2000 L/kg. Distribution concentration of BPF and its metabolites changed seasonally, and accumulation in sediment was much larger than that in surface water and hydrobionts. The risk is gradually increasing in sediment, but it does not reach high risk. The likelihood of bioaccumulation of parent compounds was greater than its metabolites. The library can be used in the metabolic diagnosis of pollutants with a broad range of polarities, providing a new method to acquire data for further ecological risk assessment, and offering a revolutionary strategy for environmental metabolomics investigation in aquatic ecosystems.

A magnetic stir bar sorbent of metal organic frameworks, carbon foam decorated zinc oxide and cryogel to enrich and extract parabens and bisphenols from food samples

A porous composite magnetic stir bar adsorbent was fabricated for the extraction and enrichment of parabens and bisphenols from selected beverage samples. The adsorbent comprised a metal organic framework, carbon foam decorated zinc oxide and magnetic nanoparticles embedded in polyvinyl alcohol cryogel. The porous composite stir bar adsorbent could adsorb parabens and bisphenols via hydrogen bonding, π-π and hydrophobic interactions. In the best conditions, linearity was good from 5.0 to 200.0 µg/L for methyl paraben, ethyl paraben and bisphenol A and from 10.0 to 200.0 µg/L for bisphenol B and butyl paraben. Limits of detection ranged from 1.5 to 3.0 µg/L. The developed composite stir bar was successfully applied to extract and determine parabens and bisphenols in fruit juice, beer and milk. Recoveries ranged from 89.5 to 99.5 % with RSDs lower than 6 %. The developed sorbent and new methodology were evaluated in terms of its green character with satisfactory results.

Determination of tetrabromobisphenol A and its brominated derivatives in water, sediment and soil by high performance liquid chromatography-tandem mass spectrometry

Tetrabromobisphenol A (TBBPA) was typical brominated flame retardant and potential environmental endocrine disruptor, and it had persistence, bioaccumulation and chronic toxicity. Simultaneous determination of ultra-trace TBBPA, tribromobiphenol A (tri-BBPA), dibromobiphenol A (di-BBPA), monobromobisphenol A (mono-BBPA) and bisphenol A (BPA) was developed by high performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS), the parent ion charge ratios (m/z) had been optimized. The linear range was wider and the limit of detection was (LOD) 0.09 ~ 0.21 ng mL-1, which could detect trace pollutants. The extraction efficiency was improved by optimizing the parameters, HLB cartridge was used in the water sample by solid phase extraction (SPE), the recovery rates in water samples were over 80.28% with three concentration levels, the relative standard deviations (RSD) were less than 7.12%, and the minimum detection limit of the method was 0.90 ~ 2.10 × 10-3 ng mL-1. Soil and sediment samples were extracted by accelerated solvent extraction (ASE), the recovery rates in soil and sediment were over 79.40% and 75.65%, the minimum detection limit was 0.0225 ~ 0.0525 ng g-1, RSD was less than 7.19%. The proffered method was successfully utilized to detect actual samples, the residue of di-BBPA and mono-BBPA are detected in Naihe River and Shuxi River in Tai'an City, residue of di-BBPA and mono-BBPA was detected in the soil, and there was low residual amount of di-BBPA, mono-BBPA and BPA in the sediment of Shuxi River.

A molecularly imprinted polymer monolithic column with dual template and bifunctional monomers for selective extraction and simultaneous determination of eight phenolics from polycarbonate cups

A molecularly imprinted polymer (MIP) monolithic column was prepared in situ in a pipette tip using phenol and bisphenol A as dual templates, 4-vinyl pyridine and β-cyclodextrin as bifunctional monomers. It was used for the selective and simultaneous solid phase extraction of eight phenolics, including phenol, m-cresol, p-tert-butylphenol, bisphenol A, bisphenol B, bisphenol E, bisphenol Z, and bisphenol AP. The MIP monolithic column was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and nitrogen adsorption experiment. The results of selective adsorption experiments showed that the MIP monolithic column can selective recognize the phenolics and have excellent adsorption property. The imprinting factor for bisphenol A can be as high as 4.31, and the maximum adsorption capacity for bisphenol Z can reach 201.66 mg g^-1. Under the optimal extraction conditions, a selective and simultaneous extraction and determination method for eight phenolics was established based on the MIP monolithic column and high-performance liquid chromatography with ultraviolet detection. The linear ranges (LRs) of the eight phenolics were 0.5-200 μg L^-1, the limits of quantification (LOQs) and detection (LODs) were 0.5-2.0 μg L^-1 and 0.15-0.67 μg L^-1. The method was applied to detect the migration quantity of the eight phenolics from polycarbonate cups and had satisfactory recovery. The method has the advantages of simple synthesis, short extraction time, as well as good repeatability and reproducibility, which provides a sensitive and reliable strategy for extracting and detecting phenolics from food contact material.

β-Cyclodextrin functionalized magnetic polyamine-amine dendrimers for high enrichment and effective analysis of trace bisphenolic pollutants in beverages

Bisphenols (BPs) are typical endocrine disruptors, which can cause great effects on environmental, organisms and human health. In this study, β-Cyclodextrin (β-CD) functionalized polyamidoamine dendrimers-modified Fe₃O₄ nanomaterials (MNPs@PAMAM (G3.0)@β-CD) were facilely synthesized. It exhibited good adsorption capacities for BPs, which was utilized to construct a sensitive tool in combination with high performance liquid chromatography for monitoring BPs such as bisphenol A (BPA), tetrabromobisphenol A (TBBPA), bisphenol S (BPS), bisphenol AF (BPAF) and bisphenol AP (BPAP) in beverage samples. The factors affecting the enrichment were examined such as generation of adsorbent, dosage of adsorbent, type and volume of eluting solvent, elution time and pH value of sample solution. The optimal parameters for enrichment was as follows: dosage of adsorbent, 60 mg; adsorption time, 50min; sample pH, pH7; elutent, 9 mL mixture of methanol and acetone(1:1); elution time, 6min; sample volume, 60 mL. The experimental results demonstrated that the adsorption conformed to pseudo-second-order kinetic model and Langmuir adsorption isotherm model. The results showed the maximum adsorption capacities of BPS, TBBPA, BPA, BPAF and BPAP were 131.80 μgg^-1, 139.84 μgg^-1, 157.08 μgg^-1, 142.11 μgg^-1 and 134.23 μgg^-1, respectively. Under optimal conditions, BPS had good linear relationship over range from of 0.5-300 μgL^-1, and the linear ranges of BPA, TBBPA, BPAF and BPAP ranged from 0.1 to 300 μgL^-1. The limits of detection (S/N = 3) for BPs were good in range of 0.016-0.039 μgL^-1. The spiked recoveries of target bisphenols (BPs) in beverages were approving over range from 92.3% to 99.2%. The established method possessed merits of easy to operate, good sensitivity, rapidness as well as environmental friendliness, and which earned great application potential for the enrichment and detection of trace BPs in practical samples.

Synthesis and Characterization of a New Molecularly Imprinted Polymer for Selective Extraction of Mandelic Acid Metabolite from Human Urine as a Biomarker of Environmental and Occupational Exposures to Styrene

4-Vinylpyridine molecularly imprinted polymer (4-VPMIP) microparticles for mandelic acid (MA) metabolite as a major biomarker of exposure to styrene (S) were synthesized by bulk polymerization with a noncovalent approach. A common mole ratio of 1:4:20 (i.e., metabolite template: functional monomer: cross-linking agent, respectively) was applied to allow the selective solid-phase extraction of MA in a urine sample followed by high-performance liquid chromatography-diode array detection (HPLC-DAD). In this research, the 4-VPMIP components were carefully selected: MA was used as a template (T), 4-Vinylpyridine (4-VP) as a functional monomer (FM), ethylene glycol dimethacrylate (EGDMA) as a cross-linker (XL), and azobisisobutyronitrile (AIBN) as an initiator (I) and acetonitrile (ACN) as a porogenic solvent. Non-imprinted polymer (NIP) which serves as a "control" was also synthesized simultaneously under the same condition without the addition of MA molecules. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to characterize the imprinted and nonimprinted polymer to explain the structural and morphological characteristics of the 4-VPMIP and surface NIP. The results obtained from SEM depicted that the polymers were irregularly shaped microparticles. Moreover, MIPs surfaces had cavities and were rougher than NIP. In addition, all particle sizes were less than 40 µm in diameter. The IR spectra of 4-VPMIPs before washing MA were a little different from NIP, while 4-VPMIP after elution had a spectrum that was almost identical to the NIP spectrum. The adsorption kinetics, isotherms, competitive adsorption, and reusability of 4-VPMIP were investigated. 4-VPMIP showed good recognition selectivity as well as enrichment and separation abilities for MA in the extract of human urine with satisfactory recoveries. The results obtained in this research imply that 4-VPMIP might be used as a sorbent for MA solid-phase extraction (MISPE), for the exclusive extraction of MA in human urine.

Electrochemical sensor based on confined synthesis of gold nanoparticles @ covalent organic frameworks for the detection of bisphenol A

Covalent-organic frameworks (COFs), a kind of conjugate crystalline polymers, has great potential for high performance electrochemical sensors due to high porosity, controllable pores and structure, and large specific surface area, etc. Herein, we developed an electrochemical sensor based on confined synthesis of gold nanoparticles @ 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) connected COFs (Au NPs@TpBD-COFs) for electrochemical detection of bisphenol A (BPA). Firstly, Au NPs were grown on the surface and in the pores of COFs by confinement synthesis strategy, which aimed to improve the conductivity and catalytic activity of COFs. Then, this composite was used to constitute electrochemical sensor for the oxidation of BPA, resulting a good electrocatalytic activity in the phosphate buffer solution (pH 7.4). Due to high conductivity of Au NPs and TpBD-COFs recognize BPA via π-π stacking interactions and hydrogen bonds, the proposed sensor for the detection of BPA has the linear range of 5-1000 μM and the detection limit of 1 μM. Finally, the proposed sensor was used to measure the content of BPA in real water samples with a satisfactory recovery from 98.6 to 106.9%. Those good results confirmed that the proposed electrochemical sensors for monitoring of BPA in the application of COFs provided a significant guidance.

Graphene Oxide Molecularly Imprinted Polymers as Novel Adsorbents for Solid-Phase Microextraction for Selective Determination of Norfloxacin in the Marine Environment

In this study, a novel sample pretreatment strategy of solid-phase microextraction using graphene oxide molecularly imprinted polymers as adsorbents coupled with high-performance liquid chromatography was developed to detect norfloxacin in the marine environment. As a carrier, the imprinted polymers were synthesized by precipitation polymerization with graphene oxide. Compared with graphene oxide non-imprinted polymers, the graphene oxide molecularly imprinted polymers exhibited higher adsorption capacity towards norfloxacin. The synthesized polymeric materials were packed into a molecularly imprinted solid-phase microextraction cartridge, and critical parameters affecting the extraction process were optimized. Under the optimized molecular imprinted solid-phase microextraction condition, the proposed method was applied to the analysis of norfloxacin for seawater and fish with satisfactory recovery (90.1–102.7%) and low relative standard deviation (2.06–5.29%, n = 3). The limit of detection was 0.15 μg L⁻¹ and 0.10 μg kg⁻¹ for seawater and fish, respectively. The study revealed that the proposed molecularly imprinted solid-phase microextraction represents an attractive sample pretreatment strategy for the analysis of norfloxacin in the marine environment.

Dummy template based molecularly imprinted solid-phase microextraction coating for analysis of trace disinfection by-product of 2,6-dichloro-1,4-benzoquinone using high-performance liquid chromatography

Trace disinfection by-products (DBPs) produced during the disinfection of drinking water are potentially carcinogenic, teratogenic and mutagenic, which has aroused much attention recently. In this study, a molecularly imprinted (MIP) solid -phase microextraction (SPME) fiber coating was prepared by an in-situ polymerization method using a dummy template molecule for the analysis of trace 2,6-dichloroindole-1,4-benzoquinone (2,6-DCBQ), a typical DBP. The characterization results suggested that this monolithic SPME fiber under the optimized conditions had the porous structure, large surface area and good thermal stability. Due to the strong structural recognition and molecular interaction between MIP SPME coating and target molecule, it showed good extraction selectivity and capacity to trace 2,6-DCBQ with an imprinting factor of 4.7. Then, coupling with high-performance liquid chromatography (HPLC)-ultraviolet (UV) detection, a sensitive analytical method for trace 2,6-DCBQ in water samples was successfully established with a detection limit down to 2.3 ng/mL. The recoveries of the proposed method were in range of 84.4-122% with the relative standard deviations of 1.0-13% (n = 3). The results showed that this MIP SPME-HPLC-UV method possessed high analytical selectivity and sensitivity for trace 2,6-DCBQ in water, which would benefit the improvement of the practicability of DBPs monitoring and detection methodology.

Comparison and recent progress of molecular imprinting technology and dummy template molecular imprinting technology

Molecular imprinting technology for the preparation of polymers with specific molecular recognition function had become one of the current research hotspots. It has been widely applied in chromatographic separation, antibody and receptor mimetics, solid-phase extraction, bio-sensors, and other fields in the last decades. In this study, molecular imprinting technology was summarized from the points of templates and dummy templates, and four typical target analytes were selected to compare the differences between templates and dummy templates. The current status and prospects of molecular imprinting technology were also proposed.

A Review on Molecularly Imprinted Polymers Preparation by Computational Simulation-Aided Methods

Molecularly imprinted polymers (MIPs) are obtained by initiating the polymerization of functional monomers surrounding a template molecule in the presence of crosslinkers and porogens. The best adsorption performance can be achieved by optimizing the polymerization conditions, but this process is time consuming and labor-intensive. Theoretical calculation based on calculation simulations and intermolecular forces is an effective method to solve this problem because it is convenient, versatile, environmentally friendly, and inexpensive. In this article, computational simulation modeling methods are introduced, and the theoretical optimization methods of various molecular simulation calculation software for preparing molecularly imprinted polymers are proposed. The progress in research on and application of molecularly imprinted polymers prepared by computational simulations and computational software in the past two decades are reviewed. Computer molecular simulation methods, including molecular mechanics, molecular dynamics and quantum mechanics, are universally applicable for the MIP-based materials. Furthermore, the new role of computational simulation in the future development of molecular imprinting technology is explored.

[Advances in solid-phase extraction for bisphenols in environmental samples]

Owing to the strict restrictions on the production and use of bisphenol A (BPA), bisphenol analogs (e. g., bisphenol S and bisphenol F) are gradually coming to use in many fields. BPA and these bisphenol analogs are so-called bisphenols (BPs). BPs as a class of endocrine disrupters are widely distributed in the environment (water, sediments, sludge, and aquatic products). BPs enter the human body through various routes, leading to endocrine disruption, cytotoxicity, genotoxicity, reproductive toxicity, dioxin-like effects, and neurotoxicity. The Canadian government has identified BPs as substances for further scoping/problem formulation. Because of the widespread attention paid to BPs in the environmental field, research is being expanded to cover water, sediment, dust, and biological samples, and other media. Given the significant differences in the complexity and pollution concentration of environmental samples, the development of pretreatment methods that afford high extraction efficiency, good purification selectivity, strong universality, operational simplicity, and high-throughput extraction and purification, are necessary to realize the highly sensitive detection of BPs in environmental media. In recent years, solid-phase extraction (SPE), accelerated solvent extraction (ASE), microwave-assisted extraction (MAE), and dispersion liquid-liquid-microextraction (DLLME) as new pretreatment technologies have gradually replaced the traditional liquid-liquid extraction and Soxhlet extraction. SPE has seen rapid development for the extraction and purification of BPs in various environmental samples, overcoming the bottlenecks related to time, energy, and solvent consumption in traditional methods while extending technical support for the analysis of emerging pollutants. The physicochemical properties, usage, and environmental hazards of typical BPs were briefly reviewed, with emphasis on the application of SPE products, development of new adsorbents, and transformation of the SPE mode. Commercialized SPE products are universally applicable in the field of environmental monitoring, while products suitable for the pretreatment of BPs are limited. The development of new adsorbents mainly focused on their adsorption capacity and selectivity. For example, ordered mesoporous silicon, carbon nanomaterials, metal-organic frameworks, and cyclodextrins have large surface areas, good adsorption performance, and regular pore structures, which improve the adsorption capacity of BPs. Molecularly imprinted polymers (MIPs) and mixed-mode ion-exchange polymers are mainly used to improve the selectivity of BPs in the purification process. In addition, MIPs have high chemical, mechanical, and thermal stabilities, which ensures their widespread application in the extraction, preconcentration, and separation of BPs. A variety of new SPE adsorbents can partially meet the diverse needs for detection. There is a consensus that the current challenges in analytical chemistry include the determination of contaminants at low concentration levels, but at the same time, more efficient and environment-friendly methodologies are required. With the introduction of high-sensitivity instruments in the market, the SPE model is seeing gradual development in terms of miniaturization, automation, and simplification. This in turn has minimized solvent consumption, analysis time, and labor cost, resulting in more efficient and affordable analytical methods such as QuEChERS, solid-phase microextraction (SPME), and magnetic solid-phase extraction (MSPE) to adapt to the new development scenario.

Simultaneous adsorption and determination of bisphenol compounds in water medium with a Zr(IV)-based metal-organic framework

A chemically stable Zr(IV)-based metal-organic framework (BUT-17) has been explored for simultaneous adsorption and determination of bisphenol compounds (BPs) in aqueous medium. The prepared BUT-17 possesses a large surface area (2936 m² g^-1) and excellent fluorescent performance. An adsorption capacity of 111 mg g^-1 for bisphenol A (BPA) with a rapid adsorption rate (1.76 g mg^-1 min^-1) is achieved by BUT-17. The excellent adsorption performance could be attributed to the hydrogen bond interaction between BPs and BUT-17. Furthermore, the fluorescent intensity of BUT-17 was quenched up to 92% due to the formation of complexes between BPs and BUT-17. Thus, a BUT-17-based fluorescent sensing method for the rapid determination of BPs has been established with the limit of detection of 10.0 ng mL^-1 for BPA and a linear range from 2.0 to 23.0 μg mL^-1. These results indicate that as an outstanding multifunctional platform, BUT-17 is promising for the simultaneous removal and determination of BPs in water medium. Simultaneous removal and detection of BPs with BUT-17.

A green molecular imprinted solid-phase extraction protocol for bisphenol A monitoring with HPLC-UV to guarantee the quality and safety of walnuts under different storage conditions

Monitoring the residual toxicant concentrations in foods is the key step for minimizing potential hazards. The huge interest about food contamination and exposure to endocrine disruptors such as bisphenol A has emerged the development of sensitive analytical methodologies to guarantee the safety and quality of foods. In this work, a green molecularly imprinted solid-phase extraction protocol coupled with high-performance liquid chromatography with UV detection was optimized following the principles of green analytical chemistry. An imprinted sol-gel silica-based hybrid inorganic-organic polymeric sorbent was used to monitor the leaching of bisphenol A from different packaging materials (glass vessels, cans, and polypropylene containers) in walnuts stored within a period of 6 months at 25 and 4°C. Extraction parameters including loading time (5-20 min), solvent type (acetonitrile, ethanol, methanol, acetone, acetonitrile:methanol, 50:50, v/v), and elution flow rate (0.2-1 mL/min) were optimized with one-factor-at-a-time method. The selected extraction optimum parameters incorporated elution with acetonitrile at 0.2 mL/min flow rate, for 10 min sample holding time. The imprinting factor was equal to 4.55 ± 0.26 (n = 3). The optimized method presented high recovery (94.3 ± 4.2%, n = 3), good linearity (>0.999), intra-assay repeatability (90.2-95.6%, n = 3), and interassay precision (86.7-93.1%, n = 3).

Bisphenol A and Its Analogues in Chinese Total Diets: Contaminated Levels and Risk Assessment

Bisphenol A (BPA) and its analogues (BPs) are suspected posing potential endocrine disrupting properties. They might migrate into foodstuffs through food packaging materials or contaminated water and soil. Dietary exposure is of paramount importance way for human health. European Food Safety Authority (EFSA) lowered the value of tolerable daily intake (TDI) from 50 μg/kg bw/day (d) to a temporary (t) TDI (t-TDI) of 4 μg/kg bw/d. In this study, the Chinese total dietary samples were analyzed for assessing the exposure risk of BPs by diets. BPA, bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF) were found in 12 kinds of food samples except for bisphenol B (BPB). A deterministic approach was used to calculate the dietary intakes of 4 kinds of compounds. For different age and gender groups, the exposure levels of BPA (178.440-403.672 ng/kg bw/d) was the highest, followed by BPS (21.372-52.112 ng/kg bw/d), BPF (20.641-50.507 ng/kg bw/d), and BPAF (0.434-1.210 ng/kg bw/d). Based on the t-TDI set by EFSA (4 μg/kg bw/d for BPA), the BPs through dietary intake pose low risks on the Chinese general population even summarization exposure levels of different BPs. However, human can be exposed to multiple endocrine disrupting chemicals rather than BPs alone; combined exposure risks should be further considered.

Synthesis of an organic-inorganic hybrid absorbent for in-tube solid-phase microextraction of bisphenol A

This research is an application of fiber-in-tube solid-phase microextraction followed by high-performance liquid chromatography with UV detection for the extraction and determination of trace amounts of bisphenol A. Nanomagnetic Fe₃ O₄ was formed on the surface of polypropylene porous hollow fibers to increase the surface area and then it was coated with polystyrene. The introduction of polystyrene improves the surface hydrophobicity and is an appropriate extractive phase because it is highly stable in aquatic media. The extraction was carried out in a short capillary packed longitudinally with the fine fibers as the extraction medium. Extraction conditions, including extraction and desorption flow rates, extraction time, pH, and ionic strength of the sample solution, were investigated and optimized. Under optimal conditions, the limit of detection was 0.01 µg/L. This method showed good linearity for bisphenol A in the range of 0.033-1000 µg/L, with the coefficient of determination of 0.9984. The inter- and intraday precisions (RSD%, n = 3) were 7.9 and 6.3%, respectively. Finally, the method was applied to analysis of the analyte in thermal papers, disposable plastic cups, and soft drink bottles.

Application of surface-imprinted polymers supported by hydroxyapatite in the extraction of zearalenone in various cereals

Surface-imprinted polymers supported by hydroxyapatite (HAP@MIPs) were prepared using coumarin-3-carboxylic acid and naringenin as dummy template molecules of zearalenone (ZEA). HAP@MIPs were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, particle size distribution analysis, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The adsorption performance was studied. The results showed that it could reach the adsorption equilibrium within 6 min. The adsorption amount could reach 6.77 μg mg^-1, while the concentration was 20 μg mL^-1. The self-made solid-phase extraction (SPE) columns were prepared with HAP@MIPs as sorbents for the separation and purification of ZEA in cereal samples. The method was established by high-performance liquid chromatography (HPLC). The recoveries were in the range of 70.09-101.88%; the relative standard deviation was 2.06-8.47%. Finally, millet, coix lachryma, and corn were placed under extreme conditions to produce ZEA. The method was used to extract and analyze ZEA in the above samples. The results showed that self-made SPE columns with HPLC could be used for the separation and enrichment of ZEA in real samples. Graphical abstract.

Eco-friendly alginate encapsulated magnetic graphene oxide beads for solid phase microextraction of endocrine disrupting compounds from water samples

In the proposed method iron crosslinked alginate encapsulated magnetic graphene oxide beads were synthesized and used as an adsorbent for the microextraction of endocrine disrupting compounds from water samples and further analyzed by high performance liquid chromatography with ultraviolet detector. The beads were characterized using spectroscopic techniques, such as Fourier transform infra-red spectroscopy for the determination of different functional groups, Scanning electron microscopy for surface morphology, X-ray diffraction for phase determination and energy dispersive X ray spectroscopy for elemental composition. The results revealed that beads surface have functional groups of alginate and graphene oxide which are involved in π-π, n-πinteractions and hydrogen bonding for the bisphenol A and epichlorohydrin adsorption. The experimental conditions were studied for two endocrine disrupting compounds (Epichlorohydrin ad Bisphenol A) and at optimum conditions the adsorption capacity was 6.73 mgg^-1 for epichlorohydrin and 7.01 mgg^-1 for bisphenol A. The kinetic and equilibrium studies revealed that the adsorption process follow pseudo-second order kinetics and Langmuir equilibrium models. Analytical parameters were calculated for the microextraction of epichlorohydrin and bisphenol A. Limit of detection was 8.25 ngL^-1 and 13.99 ngL^-1 (n = 4) for epichlorohydrin and bisphenol A, respectively. Different solvents used for microextraction and maximum extraction of both endocrine disrupting compounds were obtained with methanol. The proposed method was applied to spiked samples and the recovery values were 97.17 ± 3.13% for epichlorohydrin and 99.46 ± 1.39% for bisphenol A. The magnetic graphene oxide encapsulated inside an alginate shows nontoxic green chemical with high extraction performance for toxic organic compounds in water treatment.

Assessment of different isotope dilution strategies and their combination with switchable solvent-based liquid phase microextraction prior to the quantification of bisphenol A at trace levels via GC-MS

Different isotope dilution strategies were evaluated to quantify bisphenol A. High accuracy and precision were achieved by SS-LPME and ID⁴ combination.

A versatile and recyclable molecularly imprinted polymer as an oxidative catalyst of sulfur derivatives: a new possible method for mustard gas and V nerve agent decontamination

A molecularly imprinted polymer containing a porphyrin unit was developed as a biomimetic heterogenous catalyst for the oxidation of sulfur derivatives. Its catalytic efficiency under mild conditions and its easy recovery represent a great asset for the design of new decontamination tools for yperite and VX.

A green deep eutectic solvents microextraction coupled with acid-base induction for extraction of trace phenolic compounds in large volume water samples

A simple, effective and convenient method for determination of phenolic compounds by acid-base induced deep eutectic solvents (DESs) microextraction was developed. The binary and ternary DESs were prepared by a range of fatty acids (C₈-C₁₂), which can act as hydrogen bond donors and hydrogen bond acceptors simultaneously. The gas-assisted mixing customization provides excellent mixing performance and concentration efficiency through the bubble adsorption mechanism for the handling of large-volume aqueous sample. In extraction process, NH₃·H₂O can act as the emulsifier agent and reacted with DESs to form salts with a cloudy solution, which can obviously improve the extraction efficiency. HCl can act as the phase separation agent, and there is no need to centrifuge, which increases the efficiency of analysis procedure. The factors affected on extraction efficiency were carefully optimized. At optimum conditions and molar ratio of C₈:C₉:C₁₂ (3:2:1), the limit of detections (LODs), the preconcentration factor, the repeatability (RSDs%) were in the range of 0.22-0.53 μg L^-1, 235-244, and 2.6-6.7%, respectively. Finally, the proposed method was applied to analyze four phenolic compounds in real water samples and the recoveries were between 87.4% and 106.6%.

Molecularly Imprinted Materials for Selective Biological Recognition

Molecular imprinting is an approach of generating imprinting cavities in polymer structures that are compatible with the target molecules. The cavities have memory for shape and chemical recognition, similar to the recognition mechanism of antigen-antibody in organisms. Their structures are also called biomimetic receptors or synthetic receptors. Owing to the excellent selectivity and unique structural predictability of molecularly imprinted materials (MIMs), practical MIMs have become a rapidly evolving research area providing key factors for understanding separation, recognition, and regenerative properties toward biological small molecules to biomacromolecules, even cell and microorganism. In this review, the characteristics, morphologies, and applicability of currently popular carrier materials for molecular imprinting, especially the fundamental role of hydrogels, porous materials, hierarchical nanoparticles, and 2D materials in the separation and recognition of biological templates are discussed. Moreover, through a series of case studies, emphasis is given on introducing imprinting strategies for biological templates with different molecular scales. In particular, the differences and connections between small molecular imprinting (bulk imprinting, "dummy" template imprinting, etc.), large molecular imprinting (surface imprinting, interfacial imprinting, etc.), and cell imprinting strategies are demonstrated in detail. Finally, future research directions are provided.