The role of microextraction techniques in occupational exposure assessment. A review

An exploratory study of volatile and semi-volatile organic compounds in PM2.5 atmospheric particles from an outdoor environment in Brazil

The development of methods for determining volatile and semi-volatile organic compounds in public spaces has become necessary to identify potential health and environmental risks. This study presents a practical methodology for sampling, extracting, detecting, and identifying these compounds in a vehicular traffic region in Belo Horizonte, Brazil. The methodology uses direct-immersion solid phase microextraction (DI-SPME) and static headspace (SHS) to extract SVOCs/VOCs. Comprehensive time-of-flight gas chromatography mass spectrometry (GC×GC/Q-TOFMS) and gas chromatography coupled to mass spectrometry (GC/MS) were used to detect and identify compounds. The analysed samples, collected with a high-volume sampler (Hi-Vol) with quartz filters and in which particulate matter (PM2.5) was retained, showed the presence of more than 200 compounds, both biogenic (natural origin) and anthropogenic (human origin). Regarding the distribution of chemical classes, aromatic compounds were predominantly found at 29.2%, followed by esters at 20.8%, non-aromatic hydrocarbons at 5.6%, and carboxylic acids at 9.4%. Static headspace gas chromatography (HS-GC) enabled the identification and quantification of 21 volatile compounds, including BETX, dichloromethane, chloroform, and naphthalene, which are currently regulated by the US Environmental Protection Agency (EPA).

Needle trap device technique: From fabrication to sampling

Needle Trap Device (NTD) as a novel, versatile, and eco-friendly technique has played an important role in analytical and environmental chemistry. The distinctive role of this interdisciplinary technique can be defended through the sampling and analysis of biological samples and industrial pollutants in gaseous and liquid environments. In recent years, significant efforts have been made to enhance the performance of the needle trap device resulting in the development of novel extraction routes by various packing materials with improved selectivity and enhanced adsorption characteristics. These achievements can lead to the facilitated pre-concentration of desired analytes. This review tries to have a comparative and comprehensive survey of the three important areas of NTD technique: I) Fabrication and preparation procedures of NTDs; II) Sampling techniques of pollutants using NTDs; and III) Employed materials as adsorbents in NTDs. In the packing-material section, the commercial and synthetic adsorbents such as carbon materials, metal-organic frameworks, aerogel, and polymers are considered. Furthermore, the limitations and potential areas for future development of the NTD technique are presented.

Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Application of boehmite as a fiber coating for headspace solid-phase microextraction of chlorophenols from aqueous samples

In this paper, the extraction of chlorophenols from water samples was carried out using high surface area boehmite nanoparticles as a sorbent. The surfactant-free process employed to make the nano-boehmite used in this work was simple, green, and efficient. The proposed approach was based on headspace solid-phase microextraction, followed by GC-ECD for the determination of analytes. In situ derivatization of analytes was performed with acetic anhydride in a basic medium. Various effective parameters, including the amount of derivatization reagent, ionic strength, desorption temperature and time, extraction temperature, equilibrium time, and extraction time were studied. Under optimal conditions, the linear dynamic range was 0.05-5.0 μg L-1 for 2,4-dichlorophenol and 2,6-dichlorophenol and 0.003-0.1 μg L-1 for 2,4,6-trichlorophenol. A low limit of detection (0.75 × 10-3-15 × 10-3 μg L-1), and relative standard deviations for real samples (RSDs) <10% were obtained. The precision (as intra- and inter-day RSDs) was between 1.2 and 9.8%. In comparison to commercial fibers (CAR-PDMS, 85 μm), this fiber showed a greater extraction efficiency. Various water samples were subjected to extraction by the proposed method. The recoveries ranged from 90 to 110%.

Arsenic speciation by using emerging sample preparation techniques: a review

Arsenic is a hazardous element that causes environmental pollution. Due to its toxicological effects, it is crucial to quantify and minimize the hazardous impact on the ecology. Despite the significant advances in analytical techniques, sample preparation is still crucial for determining target analytes in complex matrices. Several factors affect the direct analysis, such as trace-level analysis, advanced regulatory requirements, complexity of sample matrices, and incompatible with analytical instrumentation. Along with the development in the sample preparation process, microextraction methods play an essential role in the sample preparation process. Microextraction techniques (METs) are the newest green approach that replaces traditional sample preparation and preconcentration methods. METs have minimized the limitation of conventional sample preparation methods while keeping all their benefits. METs improve extraction efficacy, are fast, automated, use less amount of solvents, and are suitable for the environment. Microextraction techniques with less solvent consumption, such as solid phase microextraction (SPME) solvent-free methods, and liquid phase microextraction (LPME), are widely used in modern analytical procedures. SPME development focuses on synthesizing new sorbents and applying online sample preparation, whereas LPME research investigates the utilization of new solvents.

Current overview and perspectives in environmentally friendly microextractions of carbamates and dithiocarbamates

Carbamates and dithiocarbamates are two classes of pesticides widely employed in the agriculture practice to control and avoid pests and weeds, hence, the monitoring of the residue of those pesticides in different foodstuff samples is important. Thus, this review presents the classification, chemical structure, use, and toxicology of them. Moreover, it was shown the evolution of liquid- and solid-phase microextractions employed in the extraction of carbamates and dithiocarbamates in water and foodstuff samples. The classification, operation mode, and application of the microextractions of liquid-phase and solid-phase used in their extraction were discussed and related to the analytical parameters and guidelines of green analytical chemistry.

Deep Eutectic Solvent-Based Microextraction of Lead(II) Traces from Water and Aqueous Extracts before FAAS Measurements

Microextraction procedures for the separation of Pb(II) from water and food samples extracts were developed. A deep eutectic solvent composed of α-benzoin oxime and iron(III) chloride dissolved in phenol was applied as a phase separator support. In addition, this deep eutectic mixture worked as an efficient extractor of Pb(II). The developed microextraction process showed a high ability to tolerate the common coexisting ions in the real samples. The optimum conditions for quantitative recoveries of Pb(II) from aqueous extracts were at pH 2.0, conducted by adding 150 µL from the deep eutectic solvent. The quantitative recoveries were obtained with various initial sample volumes up to 30 mL. Limits of detection and limits of quantification of 0.008 and 0.025 µg L^-1 were achieved with a relative standard deviation (RSD%) of 2.9, which indicates the accuracy and sensitivity of the developed procedure. Recoveries from the reference materials, including TMDA 64.2, TMDA 53.3, and NCSDC-73349, were 100%, 97%, and 102%, respectively. Real samples, such as tap, lake, and river water, as well as food samples, including salted peanuts, chickpeas, roasted yellow corn, pistachios, and almonds, were successfully applied for Pb(II) analysis by atomic absorption spectroscopy (AAS) after applying the developed deep eutectic solvent-based microextraction procedures.