Electrochemical aptasensor for ultrasensitive detection of PCB77 using thionine-functionalized MoS2-rGO nanohybrid

Ultrasensitive monitoring of PCB77 in environmental samples using a visible-driven photoelectrochemical sensing platform coupling with exonuclease I assisted in target recycling

Due to the urgent need for detecting trace amounts of 3,3',4,4'-tetrachlorobiphenyl (PCB77) in the environment, we have developed an efficient and visible-driven photoelectrochemical (PEC) sensing platform based on carbon quantum dots (CQDs) modified titanium dioxide nanorods (TiO2 NRs), coupling with exonuclease I (Exo I) assisted in target recycling for significant signal amplification. CQDs/TiO2 NRs with high visible-light absorption ability and electron-hole separation efficiency is used as photoactive substrate for anchoring anti-PCB77 aptamer and its complementary DNA (cDNA). With the addition of PCB77, the specific interaction between PCB77 and its aptamer forces aptamer to separate from the electrode surface, resulting in an increase in photocurrent density. Adding Exo I in the test system, a self-catalytic target cycle was motivated, which significantly increased the PEC signal by more than twice, achieving signal amplification. The relationship between the photocurrent density changes and the concentrations of PCB77 are utilized to achieve quantitative detection of PCB77. The designed PEC sensing platform has good analytical performance with a detection limit as low as 0.33 pg L-1, high selectivity and stability. Moreover, the PEC sensor is successfully used to evaluate the content of PBC77 in the environment samples. The established sensing platform provides a simple and efficient method for detecting trace amounts of PCB77 in the environment.

Portable electrochemical aptasensor for highly sensitive detection of 3,3',4,4'-tetrachlorobiphenyl

Aptamer-based electrochemical sensors are frequently used as independent, surface-functionalized, passive electrodes. However, their sensitivity and detection limits become limited, particularly when the electrode area is reduced to facilitate miniaturization. A mobile phone-based microfluidic electrochemical aptamer sensing platform for 3,3',4,4'-tetrachlorobiphenyl (PCB77) detection was developed in this work. This aptamer sensor utilized Exonuclease I (Exo I) and DNA/AuNPs/horseradish peroxidase (DNA/AuNPs/HRP) nanoprobes as a merged signal amplification method, which resulted in an increase in the electrochemical sensing performance. Sensitive detection of PCB77 was accomplished by functionalizing the hierarchically structured Au@MoS2/CNTs/GO modified working/sensing electrode with the specific aptamer. The aptamer sensor was tested with different concentrations of PCB77 within the microfluidic platform. Afterward, the differential pulse voltammograms were recorded using a wireless integrated circuit device. Subsequently, the collected data was transmitted to a smartphone using Bluetooth communication. A detection limit of 0.0085 ng/L was obtained for PCB77 detection, with a detection range from 0.1 to 1000 ng/L. In addition, the detection of PCB77 in spiked water samples validated the possibility of using this aptamer sensor in a real environment, and the aptamer sensor demonstrated high selectivity in distinguishing PCB77 from other potential interfering species. The merging of electrochemical aptamer sensors with purposefully engineered microfluidic and integrated devices in this study is a novel and promising method that provides a dependable platform for on-site applications.

Sandwich-type electrochemical aptasensor based on hemin-graphite oxide as a signal label and rGO/MWCNTs/chitosan/carbon quantum dot modified electrode for sensitive detection of Acinetobacter baumannii bacteria

Acinetobacter baumannii (A. baumannii) is a pathogenic bacterium that causes severe infections and its rapid and reliable diagnosis is essential for effective control and treatment. In this study, we present an electrochemical aptasensor based on a signal amplification strategy for the detection of A. baumannii, the high specificity and affinity of the aptamer for the target make it favorable for signal amplification. This allows for a highly sensitive and selective detection of the target. The aptasensor is based on a carbon screen-printed electrode (CSPE) that has been modified with a nanocomposite consisting of multi-walled carbon nanotubes (MWCNTs), reduced graphene oxide (rGO), chitosan (CS), and a synthesized carbon quantum dot (CQD) from CS. Additionally, the self-assembled aptamers were immobilized on hemin-graphite oxide (H-GO) as a signal probe. The composition of the nanocomposite (rGO-MWCNT/CS/CQD) provides high conductivity and stability, facilitating the efficient capture of A. baumannii onto the surface of the aptasensor. Also, aptamer immobilized on Hemin-graphite oxide (H-GO/Aptamer) was utilized as an electrochemical signal reporter probe by H reduction. This approach improved the detection sensitivity and the aptamer surface density for detecting A. baumannii. Furthermore, under optimized experimental conditions, the aptasensor was demonstrated to be capable of detecting A. baumannii with a linear range of (10 - 1 × 107 Colony-forming unit (CFU)/mL) and a limit of detection (LOD) of 1 CFU/mL (σ = 3). One of the key features of this aptasensor is its ability to distinguish between live and dead bacteria cells, which is very important and critical for clinical applications. In addition, we have successfully detected A. baumannii bacteria in healthy human serum and skim milk powder samples provided using the prepared electrochemical aptasensor. The functional groups present in the synthetic CQD, rGO-MWCNT, and chitosan facilitate biomolecule immobilization and enhance stability and activity. The fast electron-transfer kinetics and high conductivity of these materials contribute to improved sensitivity and selectivity. Furthermore, The H-GO/Aptamer composite's large surface area increases the number of immobilized secondary aptamers and enables a more stable structure. This large surface area also facilitates more H loading, leading to signal amplification.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Sandwich-Type Electrochemical Aptasensor for Highly Sensitive and Selective Detection of Pseudomonas Aeruginosa Bacteria Using a Dual Signal Amplification Strategy

An electrochemical aptasensor developed to realize the detection of Pseudomonas aeruginosa (P. aeruginosa) bacteria based on a signal amplification strategy. The carbon screen-printed electrode (CSPE) surface was modified by MIL-101(Cr)/Multi-walled carbon nanotubes (MWCNT), which significantly increased the effective surface area of the electrode, thus resulting in further F23 aptamer immobilization at the surface of the modified electrode. As a result, the P. aeruginosa can be efficiently captured onto the surface of the aptasensor. Moreover, aptamer immobilized on the two-dimensional graphitic carbon nitride complex with silver nanoparticles (AgNPs/c-g-C₃N₄/Apt) was used as an electrochemical signal label, connected to P. aeruginosa bacteria at the modified electrode. This strategy increased the aptamer surface density and the sensitivity for detecting P. aeruginosa. Also, the resultant material was thoroughly characterized using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis techniques. A highly sensitive voltammetric aptasensor for P. aeruginosa detection was obtained via this strategy at the limit of detection of 1 Colony-forming unit (CFU)/mL (σ = 3). Therefore, this proposed strategy with dual signal amplification can be a promising platform for simple, practical, reliable, and sensitive method for P. aeruginosa.

Smartphone based aptasensors as intelligent biodevice for food contamination detection in food and soil samples: Recent advances

Nowadays, the integration of conventional analytical approaches with smartphones has been developed novel, emerging and affordable devices for improving on-site detection platforms in the fields of food safety. Smartphone-based aptasensors as the next generation of portable aptasensing technique has attracted considerable attention as it offers a semi-automated user interface that can be exploited by inexpert characters. Wireless data transferability is an undeniable advantage that home-testing platforms have as well as it can suggest high computational power. In addition, these types of biodevices can provide real-time monitoring in terms of exchanging digital networks in real-time. To elaborate, the ability of smartphones to connect through the Internet is one of the most critical advantages of smartphone-based aptasensor that can be uploaded to Cloud databases and results can be disseminated as spatio-temporal maps across the globe. This review focused on the recent progress and technical breakthroughs of aptasensor on the smartphone as a groundbreaking enterprise in the field of biochemical analysis, importantly in the aspect of the combination of different types of biosensors including electrochemical, optical and colorimetric. In our opinion, this review can broaden our understanding of using smartphones as a portable sensing approach by addressing the current challenges and future perspectives.

Rapid Detection and Determination of Scopolamine in the Leaf Extract of Black Henbane (Hyoscyamus niger L.) Plants Using a Novel Nanosensor

Background

Scopolamine is among the most essential tropane alkaloids used to remedy various nervous system disorders such as urinary incontinence, motion sickness, and spasmodic movements because of its anticholinergic and antispasmodic effects.

Objective

In this study, an optical nanosensor was fabricated using nano-Dragendorff’s reagent to detect and determine scopolamine in different plant parts at different stages of growth.

Method

For fabrication of the sensing phase, GO-g-PCA/DR was synthesized by encapsulation of Dragendorff’s reagent (DR) on the graphene oxide grafted with poly citric acid (GO-g-PCA) with ultrasonication for 15 min and stirred for 80 min at room temperature, and then it was immobilized on a triacetyl cellulose membrane. The kinetic absorption profiles were recorded at 360 nm, which is concerned with the reaction between immobilized GO-g-PCA/DR and different concentrations of scopolamine.

Results

The nanosensor showed a rapid, strong, and stable response to the scopolamine solution with changing the absorption spectrum at 360 nm. The reaction was completed in a period of 300 s. The SEM, AFM, and FT-IR analysis of nanocomposites and nanosensors show the successful synthesis of GO-g-PCA/DR and the reaction between nanosensor and scopolamine. All experiments were performed at the wavelength of 360 nm, room temperature, pH 7 (the scopolamine solution pH), and 300 s. The nanosensor had a linear range of 0.65 to 19.63 μg/mL and 0.19 ± 0.025 μg/mL as the limit of detection for scopolamine determination. In order to reuse the designed nanosensor, it was recovered with ethanol, and the color ultimately returned to its original state.

Conclusions

This in situ nanosensor can determine the scopolamine in real samples with easy reversibility, extended lifetime, and reproducibility of the sensing phase response.

Highlights

A sensitive, precise, and fast response optical nanosensor is designed for in situ determination of scopolamine in real samples.

A Simple Ratiometric Electrochemical Aptasensor Based on the Thionine–Graphene Nanocomposite for Ultrasensitive Detection of Aflatoxin B2 in Peanut and Peanut Oil

The accurate and reliable analysis of aflatoxin B2 (AFB2) is widely required in food and agricultural industries. In the present work, we report the first use of a ratiometric electrochemical aptasensor for AFB2 detection with high selectivity and reliability. The working principle relies on the conformation change of the aptamer induced by its specific recognition of AFB2 to vary the ratiometric signal. Based on this principle, the proposed aptasensor collects currents generated by thionine–graphene composites (ITHI) and ferrocene-labeled aptamers (IFc) to output the ratiometric signal of ITHI/IFc. In analysis, the value of ITHI remained stable while that of IFc increased with higher AFB2 concentration, thus offering a “signal-off” aptasensor by using ITHI/IFc as a yardstick. The fabricated aptasensor showed a linear range of 0.001–10 ng mL−1 with a detection limit of 0.19 pg mL−1 for AFB2 detection. Furthermore, its applicability was validated by using it to detect AFB2 in peanut and peanut oil samples with high rates of recovery. The developed ratiometric aptasensor shows the merits of simple fabrication and high accuracy, and it can be extended to detect other mycotoxins in agricultural products.

Graphene Based Nanohybrid Aptasensors in Environmental Monitoring: Concepts, Design and Future Outlook

In view of ever-increasing environmental pollution, there is an immediate requirement to promote cheap, multiplexed, sensitive and fast biosensing systems to monitor these pollutants or contaminants. Aptamers have shown numerous advantages in being used as molecular recognition elements in various biosensing devices. Graphene and graphene-based materials/nanohybrids combined with several detection methods exhibit great potential owing to their exceptional optical, electronic and physicochemical properties which can be employed extensively to monitor environmental contaminants. For environmental monitoring applications, aptamers have been successfully combined with graphene-based nanohybrids to produce a wide range of innovative methodologies. Aptamers are immobilized at the surface of graphene based nanohybrids via covalent and non-covalent strategies. This review highlights the design, working principle, recent developmental advances and applications of graphene based nanohybrid aptasensors (GNH-Apts) (since January 2014 to September 2021) with a special emphasis on two major signal-transduction methods, i.e., optical and electrochemical for the monitoring of pesticides, heavy metals, bacteria, antibiotics, and organic compounds from different environmental samples (e.g., water, soil and related). Lastly, the challenges confronted by scientists and the possible future outlook have also been addressed. It is expected that high-performance graphene-based nanohybrid aptasensors would find broad applications in the field of environmental monitoring.

An ultrasensitive ratiometric immunosensor based on the ratios of conjugated distyrylbenzene derivative nanosheets with AIECL properties and electrochemical signal for CYFRA21-1 detection

Aggregation-induced electrochemiluminescence reagent, a distyrylbenzene derivative with donor-acceptor conjugated nanosheet structure, namely TPAPCN, was used as a trace label and modified on the electrode through the formation of classical sandwich complex of antibody-antigen-antibody in this work. In aggregate state, TPAPCN with twisted structure was limited in nanometer space through intermolecular π - π stacking interactions, which not only restricts the intramolecular motions but also combines a large number of singlet excitons to greatly trigger electrochemiluminescence (ECL). The ECL signal of this system enhanced with more captured cytokeratin 19 fragment 21-1 (CYFRA21-1) on the modified electrode. Three-dimensional graphene/platinum nanoparticles with large specific surface, and excellent electroconductivity and biocompatibility were prepared and acted as excellent carriers for thionine handling (3D-GN/PtNPs/Th), which was employed for improving the loading of antibodies and generating internal electrochemical signal. Consequently, a novel ratiometric sandwich immunosensor for CYFRA21-1 detection was fabricated based on TPAPCN and 3D-GN/PtNPs/Th, that is, a rapid and reliable detection was achieved through the ratio between ECL and electrochemical signals. The prepared sensor performed good linearity in the range of 50 fg/mL to 1 ng/mL with a detection limit as low as 16 fg/mL. Moreover, the detection results revealed well in the analysis of human serum samples, demonstrating a significant application for clinical monitoring and biomolecules detection.

Electrochemical Development of an Immunosensor for Detection Polychlorinated biphenyls (PCBs) for Environmental Analysis

Polychlorinated biphenyls (PCBs) are a highly toxic family of synthetic chemical compounds. PCBs are widely spread in the environment and their toxicity can cause serious ailments to living organisms such as cancer; therefore, developing a device for the detection of PCBs in the environment is significant. In this paper, polyclonal primary anti-PCB antibodies were immobilized onto a gold screen-printed electrode with the purpose of creating an electrochemical immunosensor for the detection of Aroclor 1254. It was modified with 11-mercaptoundecanoic acid (11-MUA) and the activation of the carboxylic acid terminal was performed by cross-linking 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hyrodsuccinmide (NHS) on the electrode surface. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS), linear sweep voltammetry, atomic force microscopy (AFM), scanning electron microscopy (SEM), and contact angle measurement were employed to characterize SAM development on the gold electrode. Using a competitive assay, a 0.09 ng/mL−1 limit of detection and a linear range of 0.101–220 ng/mL−1 were determined. The self-assembled monolayers (SAM) were successful in encapsulating the PCBs on the immunosensor. The electrochemical detection showed better resolution when compared to traditional methods such as the ELISA optical technique. The novel electrochemical immunosensor approach that is discussed in this paper has the potential to offer rapid sample screening in a portable, disposable format and could contribute to the effective control and prevention of PCBs in the environment.

Electrochemical detection of matrix metalloproteinase-7 using an immunoassay on a methylene blue/2D MoS2/graphene oxide electrode

Methylene blue (MB) adsorption onto a two-dimensional molybdenum disulfide (2D MoS₂)/graphene oxide (GO) nanocomposite sitting on a screen-printed carbon electrode (SPCE) is used to develop a new sensitive label-free electrochemical immunosensor for the detection of matrix metalloproteinase-7 (MMP-7) cancer biomarkers. The 2D MoS₂/GO nanocomposite deposited onto an SPCE provides a large specific surface area, fast electron transfer, and exceptional electrical conductivity. Furthermore, MB adsorbed onto the 2D MoS₂/GO nanocomposite architecture can be used for signal amplification in electrochemical immunosensors. Moreover, an immunosensor platform was fabricated by the adsorption of anti-MMP-7 capture antibodies onto the MB/2D MoS₂/GO nanocomposite surface via electrostatic interactions for the detection of the MMP-7 immunocomplex. Under optimum conditions, the label-free immunosensor exhibits a decrease in the current response for MB corresponding to the MMP-7 concentration. The sensor affords a linear logarithmic range of 0.010-75 ng mL^-1 with a limit of detection (LOD) of 0.007 ng mL^-1. The developed electrochemical immunosensor provides high selectivity, good reproducibility, and excellent stability. Furthermore, the proposed immunosensor can be applied for the detection of MMP-7 in human serum samples with good recovery. Thus, this device can be applied for the early clinical diagnosis of pancreatic and colorectal cancers.

A novel aptasensing method for detecting bisphenol A using the catalytic effect of the Fe3O4/Au nanoparticles on the reduction reaction of the silver ions

The gold electrode was functionalized with anti-bisphenol A (BPA) aptamer and captured the BPA as analyte. By dropping the aptamer-modified magnetic Fe₃O₄/Au nanoparticles solution onto the electrode, a BPA molecule attaches to many aptamers that are in contact with a large number of Fe₃O₄/Au nanoparticles. The modified electrode were transferred to a solution containing Ag⁺ ions. Fe₃O₄/Au nanoparticles reduce the Ag⁺ ions to Ag⁰. A potential scan was applied for the oxidation of the Ag⁰-loaded magnetic nanoparticles to the AgCl. The magnitude of the stripping anodic signal of the Ag⁰ was related to the concentration of the BPA. The assay shows a detection limit of 0.6 fmol L^-1 and linear range of 1 fmol L^-1-150 pmol L^-1 and. The applicability of the aptasensor is measured by its successful use in the sensing BPA in water, milk and juice samples and measuring BPA migration from different commercial plastic products.

Highly sensitive and selective detection of PCB 77 using an aptamer-catalytic hairpin assembly in an aquatic environment

Polychlorinated biphenyls (PCBs) are synthetic organic compounds that are extremely difficult to break down in water and can accumulate in human fat and organisms. However, methods that can be used to detect large amounts of PCBs remain unsatisfactory, as they are generally overly sensitive and involve complex operations. An aptamer-based catalytic hairpin assembly (aptamer-CHA) reaction for the selective detection of 3,3′,4,4′-tetrachlorobiphenyl (PCB 77) was developed. It combines the advantages of aptamers and signal amplification reactions. The aptamer selectivity recognizes the target, PCB 77, which triggers the sensitive CHA reaction to produce a fluorescence signal. CHA is a sensitive enzyme-free signal amplification method suitable for on-site detection. Therefore, the identification aptamer is the basis for the quantitative detection of PCB 77, with a detection range of 0.01 μg L⁻¹ to 500 μg L⁻¹ and a detection limit of 0.01 μg L⁻¹. In this study, the aptamer was used to improve the selectivity of the reaction, and the CHA reaction improved the sensitivity of the detection system. Such high-sensitivity PCB detection capabilities with simplified procedures may be useful for real-time field detection and other monitoring tasks. This method can be used as a rapid fluorescence detection strategy for other targets in aquatic environments.

The fluorescence sensing strategy was used to detect PCB77 based on the aptamer-complex and catalytic hairpin assembly.

An electrochemical aptasensor-based CoxP-decorated porous carbon microspheres and AuNRs labelled methylene blue as signal labels for the sensitive detection of PCB77

In this work, a simple, specific and ultra-sensitive electrochemical aptasensor was successfully developed based on a novel signal reduction strategy for the detection of polychlorinated biphenyls (PCB77). This aptasensor was prepared by the electrodeposition of gold nanoparticles (AuNPs) on an Au electrode (AuE) modified with cobalt phosphide (Co_xP, a mixture of CoP and Co₂P) decorated porous carbon microspheres. In this study, the thiolated single-complementary DNA (cDNA) was immobilized on the surface of the modified electrode via the Au-S bond. Subsequently, the gold nanorod@methylene blue connection aptamer (AuNRs@MB-Apt) signal labels were immobilized onto the modified electrode through the principle of complementary base pairing. Further, the aptamer preferentially binds to PCB77, decreasing the amount of AuNR@MB-Apt. The DPV current response was related to the PCB77 concentration. Under the optimized experimental conditions, a low detection limit of 5.9 × 10^-2 ng L^-1 and a wide linear range of 1 × 10^-11 mg mL^-1 to 1 × 10^-4 mg mL^-1 (S/N = 3) for PCB77 were achieved. Moreover, the proposed aptasensor offered high selectivity, stability and reproducibility, indicating the broad potential application in environmental monitoring.