A perfect tandem: chemometric methods and microfluidic colorimetric twin sensors on paper. Beyond the traditional analytical approach

An optical sensor for the sensitive determination of formaldehyde gas based on chromotropic acid and 4-aminoazobenzene immobilized in a hydrophilic membrane

Formaldehyde is a common contaminant in occupational and environmental atmospheres, prolonged exposure leads to health risks, and its determination is necessary to protect health. There is a great demand for portable, rapid, and sensitive methods that can be used in resource-limited settings. In this respect, a colorimetric sensor has been developed based on the colour change from pink to purple of co-immobilized chromotropic acid and 4-aminoazobenzene in hydroxypropyl methylcellulose when it is exposed to different concentrations of formaldehyde. The concentration of formaldehyde in the gas phase was quantified by measuring the change of the appropriate colour coordinates in response to the concentration of formaldehyde. A calibration curve was obtained for formaldehyde, with a useful concentration range from 0.08 to 0.6 ppmv. The detection limit was 0.016 ppmv, which is lower than the maximum exposure concentrations recommended by both the World Health Organization (WHO) and the Occupational Safety and Health Administration (OSHA). The optical sensor was found to have good reproducibility, with a relative standard deviation of 2.3 and 1.7% at 0.08 and 0.25 ppmv, respectively. The sensor can operate at room temperature and environmental humidity, 25 °C, and 50% RH, respectively. In addition, a study of interferents (acetaldehyde, toluene, methanol, ethyl acetate, acetone, acetic acid, carbon dioxide and ammonia) showed high selectivity for formaldehyde, which indicates that this membrane is a simple, fast, and economical alternative for quantifying the concentration of formaldehyde in different environments.

Colorimetric Paper-Based Analytical Devices (PADs) Backed by Chemometrics for Pd(II) Detection

This paper presents the development of cheap and selective Paper-based Analytical Devices (PADs) for selective Pd(II) determination from very acidic aqueous solutions. The PADs were obtained by impregnating two cm-side squares of filter paper with an azoic ligand, (2-(tetrazolylazo)-1,8 dihydroxy naphthalene-3,6,-disulphonic acid), termed TazoC. The so-obtained orange TazoC-PADs interact quickly with Pd(II) in aqueous solutions by forming a complex purple-blue-colored already at pH lower than 2. The dye complexes no other metal ions at such an acidic media, making TazoC-PADs highly selective to Pd(II) detection. Besides, at higher pH values, other cations, for example, Cu(II) and Ni(II), can interact with TazoC through the formation of stable and pink-magenta-colored complexes; however, it is possible to quantify Pd(II) in the presence of other cations using a multivariate approach. To this end, UV-vis spectra of the TazoC-PADs after equilibration with the metal ions solutions were registered in the 300-800 nm wavelength range. By applying Partial Least Square regression (PLS), the whole UV-vis spectra of the TazoC-PADs were related to the Pd(II) concentrations both when present alone in solution and also in the presence of Cu(II) and Ni(II). Tailored PLS models obtained with matrix-matched standard solutions correctly predicted Pd(II) concentrations in unknown samples and tap water spiked with the metal cation, making the method promising for quick and economical sensing of Pd(II).

Design of colorimetric nanostructured sensor phases for simple and fast quantification of low concentrations of acid vapors

Two colorimetric nanostructured sensor phases (Color-NSPs) for the determination of low concentrations of acid vapors in the atmosphere of paper storage rooms have been designed and characterized. The acid vapor determination is based on the color change that occurs in polyaniline (PANI) in the presence of acids when it goes from its emeraldine base form (blue) to its emeraldine salt form (green). To synthesize the Color-NSPs, two methods have been used, a one-step method performed by grafting polyaniline onto a cellulose membrane (Cellu-PANI) and a two-step method in which in the first step, polyaniline is grafted onto the surface of polymeric nanoparticles (NPs-PANI), and in a second step, NPs-PANI are immobilized into the pores of a nylon membrane (Nylon-NPs PANI). The response of the sensors versus acid vapor was measured by color coordinates with a photographic camera. A linear response range from 1 ppmv to 7 ppmv was found for both sensors, and the detection limits were 0.95 ppmv (1.2 % RSD) and 0.40 ppmv (0.8 % RSD) for Cellu-PANI and Nylon-NPs PANI, respectively. In addition, both sensors showed complete reversibility and a short exposition time (5 min). The potential applicability of the Color-NSPs in the control of the exposure of paper heritage collections to outdoor- and indoor-generated gaseous pollutants was demonstrated by determining acid vapors in museums. The method was validated with an external reference method; the paired test was applied, and p-values greater than 5% were obtained, indicating an excellent correlation and showing that the Color-NSPs reported are simple, fast, and an economical alternative to control and protect cultural heritage materials in indoor environments.