Etching of halloysite nanotubes hollow imprinted materials as adsorbent for extracting of Zearalenone from grain samples

Selective adsorption of zearalenone by a novel magnetic molecularly imprinted carbon nanomaterial

In this paper, the objective is to immobilize molecularly imprinted polymers (MIPs) onto the surface of magnetic carbon nanoparticles (Fe3O4@SiO2@C) to develop an effective method for the adsorption of zearalenone (ZEN). The prepared products were characterized by FT-IR, SEM, TEM, XRD, VSM, TGA, and BET. The content of zearalenone in corn samples was monitored by HPLC. The results indicate that the particle size of magnetic molecularly imprinted polymers (MMIPs) is approximately 200 nm. The adsorption mechanism of MMIPs was confirmed by static adsorption and dynamic adsorption experiments. The maximum adsorption capacity was 1.56 mg/g, and the adsorption equilibrium was reached within 50 min. The scatchard model showed that MMIPs had two binding sites, a high-affinity binding site and a low-affinity site. Kinetic second-order fitting indicates that MMIPs are mainly through chemisorption. In the actual sample application, the limit of detection (LOD) and limit of quantitation (LOQ) were 0.3 mg/L and 0.9 mg/L, respectively. The recovery of corn with the standard addition of ZEN was 73.6-88.1%, and the relative standard deviation (RSD) was 2.86-5.63%. The results demonstrated that MMIPs possess the advantages of straightforward operation, high precision, and cost-effectiveness, rendering them suitable for rapid ZEN detection.

Mycotoxins-Imprinted Polymers: A State-of-the-Art Review

Mycotoxins are toxic metabolites of molds which can contaminate food and beverages. Because of their acute and chronic toxicity, they can have harmful effects when ingested or inhaled, posing severe risks to human health. Contemporary analytical methods have the sensitivity required for contamination detection and quantification, but the direct application of these methods on real samples is not straightforward because of matrix complexity, and clean-up and preconcentration steps are needed, more and more requiring the application of highly selective solid-phase extraction materials. Molecularly imprinted polymers (MIPs) are artificial receptors mimicking the natural antibodies that are increasingly being used as a solid phase in extraction methods where selectivity towards target analytes is mandatory. In this review, the state-of-the-art about molecularly imprinted polymers as solid-phase extraction materials in mycotoxin contamination analysis will be discussed, with particular attention paid to the use of mimic molecules in the synthesis of mycotoxin-imprinted materials, to the application of these materials to food real samples, and to the development of advanced extraction methods involving molecular imprinting technology.

Nanoscale Materials Applying for the Detection of Mycotoxins in Foods

Trace amounts of mycotoxins in food matrices have caused a very serious problem of food safety and have attracted widespread attention. Developing accurate, sensitive, rapid mycotoxin detection and control strategies adapted to the complex matrices of food is crucial for in safeguarding public health. With the continuous development of nanotechnology and materials science, various nanoscale materials have been developed for the purification of complex food matrices or for providing response signals to achieve the accurate and rapid detection of various mycotoxins in food products. This article reviews and summarizes recent research (from 2018 to 2023) on new strategies and methods for the accurate or rapid detection of mold toxins in food samples using nanoscale materials. It places particular emphasis on outlining the characteristics of various nanoscale or nanostructural materials and their roles in the process of detecting mycotoxins. The aim of this paper is to promote the in-depth research and application of various nanoscale or structured materials and to provide guidance and reference for the development of strategies for the detection and control of mycotoxin contamination in complex matrices of food.

Construction of AuNPs/reduced graphene nanoribbons co-modified molecularly imprinted electrochemical sensor for the detection of zearalenone

In this work, a highly sensitive and selective molecularly imprinted electrochemical sensor is exploited to detect zearalenone (ZEA) by the synergistic effect of reduced graphene nanoribbons (rGNRs) and gold nanoparticles (AuNPs). The oxidized GNRs are firstly produced by an improved Hummers' oxidation method, and then reduced and modified together with AuNPs onto a glassy carbon electrode by electrodeposition technique to realize collaborative amplification of electrochemical signal. The molecularly imprinted polymer film with specific recognition sites can be generated on the modified electrode by electropolymerization. The effect of experimental conditions is systematically investigated to obtain the best detection performance. It is found that the constructed sensor shows a wide linear range of 1-500 ng·mL^-1 for ZEA with a detection limit as low as 0.34 ng·mL^-1. Obviously, our constructed molecularly imprinted electrochemical sensor shows great potential in the application of precisely detecting ZEA in food.

Chitosan-Grafted Halloysite Nanotubes-Fe3O4 Composite for Laccase-Immobilization and Sulfamethoxazole-Degradation

A surface-engineered nano-support for enzyme laccase-immobilization was designed by grafting the surface of halloysite nanotubes (HNTs) with Fe3O4 nanoparticles and chitosan. Herein, HNTs were magnetized (HNTs-M) by a cost-effective reduction-precipitation method. The synthesized HNTs-M were grafted with 0.25%, 0.5%, 1%, and 2% chitosan (HNTs-M-chitosan), respectively. Synthesized HNTs-M-chitosan (0.25%), HNTs-M-chitosan (0.5%), HNTs-M-chitosan (1%) and HNTs-M-chitosan (2%) were linked with glutaraldehyde (GTA) for laccase immobilization. Among these formulations, HNTs-M-chitosan (1%) exhibited the highest laccase immobilization with 95.13% activity recovery and 100.12 mg/g of laccase loading. The optimized material was characterized thoroughly by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray powder diffraction (XRD), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analysis. The immobilized laccase (HNTs-M-chitosan (1%)-GTA-Laccase) exhibited higher pH, temperature, and storage stabilities. The HNTs-M-chitosan (1%)-GTA-Laccase possesses excellent reusability capabilities. At the end of 10 cycles of the reusability experiment, HNTs-M-chitosan (1%)-GTA-Laccase retained 59.88% of its initial activity. The immobilized laccase was utilized for redox-mediated degradation of sulfamethoxazole (SMX), resulting in 41%, 59%, and 62% degradation of SMX in the presence of 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), guaiacol (GUA), and syringaldehyde (SA), respectively. Repeated SMX degradation (57.10% after the sixth cycle) confirmed the potential of HNTs-M-chitosan (1%)-GTA-Laccase for environmental pollutant degradation. Thus, we successfully designed chitosan-based, rapidly separable super-magnetic nanotubes for efficacious enhancement of laccase biocatalysis, which can be applied as nano-supports for other enzymes.