Carbon dots based on natural resources: Synthesis and applications in sensors

Synthesis of Carbon Dots via Microwave-Assisted Process: Specific Sensing of Fe(III) and Antibacterial Activity

Carbon dots synthesized from a renewable and sustainable source of biomass have greater attention in the nanomaterial research field. In the present study, we adopted a facile and green synthesis of carbon dots from bio waste of pumpkin seeds using a one-pot microwave-assisted carbonization method. The synthesized carbon dots exhibit excellent photoluminescence properties with a bright blue emission peak at 399 nm and fluorescence quantum yield was about 9.5%. The optical properties and structure of carbon dots were examined using various spectroscopy techniques and the synthesized carbon practical size was about 4.37 nm and possessed good solubility in water. Carbon dots were used for the detection of Ferric ions in the water bodies and the interaction between Fe3+ ions and carbon dots was evaluated by fluorescence spectroscopy techniques. This method is a simple and selective detection of Fe3+ in the aqueous medium. Interestingly carbon dots also show good antibacterial activity at a very low concentration (1 mg/L) for effective control of E. coli 93% and Pseudomonas aeruginosa (81%), within 12 h.

Evaluation of phthalic acid tri-ethylene diamine (TED) and folic acid-based carbon quantum dots for the detection of heavy metals in water resources using fibre-optic instrumentation

Heavy metal pollution and toxicity from water resources have remained a great concern for the entire population. This research demonstrates the capability of carbon quantum dots (CQDs) for fluorescence-based heavy metal detection in different water resources using a fibre-optic spectrometer device. Two different types of CQDs phthalic acid and triethylenediamine (PT CQDs) and Folic acid (FCQDs) were synthesized using microwave irradiation and hydrothermal method, respectively. CQDs were characterized using several techniques such as TEM, EDX, XPS and FTIR. PTCQD and FCQDs both were tested for sensing capability in water reservoirs like household and river water. The results indicate that both CQDs were able to detect all six heavy metal ions (Pb2+, Co2+, Mn3+, Hg2+, Ni2+, Cr3+) tested in the study in the range of 0-100 µM. It was found that FCQDs show a three-fold higher sensitivity and greater resolution than PTCQDs for all the heavy metals samples. The CQDs' sensing capability shows that they can achieve a limit of detection in the range of 0.15-3 µM along with 100% accuracy in terms of recovery with minimal error, these results indicate that both CQDs have a tremendous potential to be used as a sensor for the detection of heavy metals even in complex water matrices. FCQDs show more sensitivity for all metals compared to PTCQDs and used in future as a sensing tool for heavy metal detection with better sensitivity and accuracy with less response time.

Green Synthesis of Carbon Quantum Dots and Carbon Quantum Dot-Gold Nanoparticles for Applications in Bacterial Imaging and Catalytic Reduction of Aromatic Nitro Compounds

This study delves into the green synthesis and multifaceted applications of three types of carbon quantum dots (CQDs), namely, CQDs-1, CQDs-2, and CQDs-3. These CQDs were innovatively produced through a gentle pyrolysis process from distinct plant-based precursors: genipin with glucose for CQDs-1, genipin with extracted gardenia seeds for CQDs-2, and genipin with whole gardenia seeds for CQDs-3. Advanced analytical techniques, including X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR), were employed to detail the CQDs' structural and surface characteristics, revealing their unique functional groups and surface chemistries. The study further explores the CQDs' bioimaging potential, where confocal fluorescence microscopy evidenced their swift uptake by Escherichia coli bacteria, indicating their suitability for bacterial imaging. These CQDs were also applied in the synthesis of gold nanoparticles (AuNPs), acting as reducing agents and stabilizers. Among these, CQD3-AuNPs were distinguished by their remarkable stability and catalytic efficiency, achieving a 99.7% reduction of 4-nitrophenol to 4-aminophenol in just 10 min and maintaining near-complete reduction efficiency (99.6%) after 60 days. This performance notably surpasses that of AuNPs synthesized using sodium citrate, underscoring the exceptional capabilities of CQD3-AuNPs. These insights pave the way for leveraging CQDs and CQD-stabilized AuNPs in bacterial imaging and catalysis, presenting valuable directions for future scientific inquiry and practical applications.

A Dual-Mode Spectrophotometric and Fluorescent Probe Based on Lignin-Derived Carbon Dots for the Detection of Atorvastatin Calcium in a Bulk Powder and a Commercial Product

Recently, dual-mode techniques have garnered considerable attention and have been shown to be effective approaches for biomedical analysis and environmental monitoring. A novel and simple dual-mode spectrophotometric and fluorometric probe based on lignin-derived carbon dots (LCDs) was developed to detect atorvastatin calcium (ATS) in a bulk powder and its commercial product. The synthesized LCDs exhibit exceptional fluorescence characteristics and are highly soluble in water while maintaining reasonable stability. The average particle size of the LCDs was 3.42 ± 1.03 nm. The characterization of the produced LCDs indicated a structure resembling graphene oxide with the presence of several functional groups. The developed LCDs show a good fluorescence quantum yield of 32.2%. The fluorescence of the LCDs is quenched by ATS at an emission wavelength of 315 nm after excitation at 275 nm through dynamic and static quenching mechanisms. The optimal reaction conditions for the dual-mode reaction were a pH of 9 and 0.05 mL of the LCDs, which were measured after 3 min at 30 °C by spectrophotometry, followed by 7 min at 20 °C by fluorometric methods. According to the spectrophotometric results, the response of ATS was linear in the range of 4.0-100.0 µg/mL, while according to the fluorometric results, the dynamic range was 3.0-50.0 µg/mL. The limits of detection (LODs) and the limits of quantification (LOQs) were 0.97 µg/mL and 2.95 µg/mL for the fluorometric method, respectively. The nanoprobe effectively analyzed ATS in medication samples and yielded good results.

Carbon Dots Derived from Non-Biomass Waste: Methods, Applications, and Future Perspectives

Carbon dots (CDs) are luminescent carbon nanoparticles with significant potential in analytical sensing, biomedicine, and energy regeneration due to their remarkable optical, physical, biological, and catalytic properties. In light of the enduring ecological impact of non-biomass waste that persists in the environment, efforts have been made toward converting non-biomass waste, such as ash, waste plastics, textiles, and papers into CDs. This review introduces non-biomass waste carbon sources and classifies them in accordance with the 2022 Australian National Waste Report. The synthesis approaches, including pre-treatment methods, and the properties of the CDs derived from non-biomass waste are comprehensively discussed. Subsequently, we summarize the diverse applications of CDs from non-biomass waste in sensing, information encryption, LEDs, solar cells, and plant growth promotion. In the final section, we delve into the future challenges and perspectives of CDs derived from non-biomass waste, shedding light on the exciting possibilities in this emerging area of research.

Comparison of Synthetic Pathways for Obtaining Fluorescent Nanomaterials Based on Halloysite and Carbon Dots for Potential Biological Sensing

Recently, fluorescent sensors have gained considerable attention due to their high sensitivity, low cost and noninvasiveness. Among the different materials that can be used for this purpose, carbon dots (CDs) represent valuable candidates for applications in sensing. These, indeed, are easily synthesized, show high quantum yield and are highly biocompatible. However, it was pointed out that the photoluminescence properties of these nanomaterials are strictly dependent on the synthetic and purification methods adopted. The presence of halloysite nanotubes (HNTs), a natural, low cost and biocompatible clay mineral, has been found to be efficient in obtaining small and highly monodispersed CDs without long and tedious purification techniques. Herein, we report the comparison of synthetic pathways for obtaining halloysite-N-doped CDs (HNTs-NCDs) that could be used in biological sensing. One was based on the synthesis of N-doped CDs by a bottom-up approach on HNTs' surface by a MW pyrolysis process; the other one was based on the post-modification of pristine N-doped CDs with halloysite derivatives. The evaluation of the best synthetic route was performed by different physico-chemical techniques. It was found that the bottom-up approach led to the formation of N-doped CDs with different functional groups onto the HNTs' surface. This evidence was also translated in the different fluorescence quantum yields and the existence of several functional groups in the obtained materials was investigated by potentiometric titrations. Furthermore, the ability of the synthesized nanomaterials as sensors for Fe3+ ions detection was assessed by spectroscopic measurements, and the cellular uptake was verified by confocal/fluorescence microscopies as well.

Recent advances in biomedical applications of carbon and graphene quantum dots: A review

The carbon-based nanostructures have led to the development of theranostic nanoplatforms for simultaneous diagnosis and therapy due to their effective cell membrane-penetration ability, low degree of cytotoxicity, excellent pore volume, substantial chemical stability, and reactive surface. In the last few years, extensive efforts were made to design multifunctional nanoplatform strategies based on carbon nanostructures, involving multimodal imaging, controlled drug release capabilities, sensing in vitro, efficient drug loading capacity, and therapy. Carbon and graphene quantum dots (CQDs and GQDs) were the recent entrants, contingently being assessed for drug delivery and bioimaging. With the advancements, these quantum dots have ignited remarkable research interest and are now widely evaluated for diagnosis, bioimaging, sensing, and drug delivery applications. The last decade has witnessed their remarkable electrical, optical, and biocompatible properties since their inception. It is presumed that both of them have high potential as drug carriers and would serve as the next generation of approaches to address numerous unresolved therapeutic challenges. This review examined the recent advances of CQD and GQD based drug delivery applications, challenges, and future perspectives to pave the way for further studies in the future.

The applications of carbon dots in oral health: A scoping review

OBJECTIVES

This scoping review aims to provide an overview of the research and potential applications of carbon dots (CDs) for oral health purposes.

DESIGN

Systematic literature searches were performed on PubMed and Web of Science databases (up to February 2023). Two co-authors selected the published works independently and extracted the data in accordance with the PRISMA statement. Studies with the application of CDs for oral health purposes were included.

RESULTS

Among 152 articles, 19 articles were finally selected. Eight studies investigated the anti-microbial effects of CDs against, for example, oral pathogens, eight studies explored the applicability of CDs in relation to oral cancer, and three studies investigated CDs in relation to cell differentiation and tissue regeneration in oral health. The studies showed the promising potential of CDs in oral health, particularly for inducing bacterial killing by increasing reactive oxygen species, killing oral cancer cells via photodynamic therapeutic effects, and inducing dental pulp and periodontal bone regeneration.

CONCLUSION

The findings show that CDs have the potential to be utilized in the future for various oral health purposes. Besides, these results underline the broad-spectrum applicability of CDs, crossing the borders of oral health.

Facile cost-effective green synthesis of carbon dots: selective detection of biologically relevant metal ions and synergetic efficiency for treatment of cancer

A facile cost-effective green synthesis approach has been used to synthesize carbon-dot (CDs) from the Kernel part of theAzadirachta Indicaseeds and investigated their fluorescent and metal ions sensing capability and also used for the delivery of drugs. Metallic ions such as Ca2+, K+, Na+, Fe3+,and Zn2+which are biologically important for many reactions and are selectively detected through the novel CDs. The resultant dot size of CDs (∼4 nm) is useful to eliminate the 'Achilles heel' problems, which is associated with the Zn2+in the body and its detection is a very challenging task. It is found that the sensitivity of CDs for the detection of Zn2+can be regulated by using different solvents. These CDs can also be used as a sensing probe for the selective detection of Fe3+at a very low concentration of solution (∼5 μM). The synthesis method of CDs reported here is cost-effective, very fast and it is highly selective towards Fe3+and Zn2+. Due to the fast response capability of these CDs, logic gate operation is achieved and it provides a new understanding to construct potential next-generation molecular devices for the detection of different biomolecules with high selectivity. Additionally, these CDs are biocompatible against normal healthy cells, capable of loading small biomolecules and drugs due to their porous nature, and exhibited potential impact for breast cancer therapy. It is observed that a significant synergic therapeutic effect of CDs loaded with doxorubicin against breast cancer cells is very promising. Thus, the CDs reported herein in this work have been synthesized through a green synthesis approach and can be used as a molecular probe for the detection of metal ions as well as for drug delivery applications.

The future of plant based green carbon dots as cancer Nanomedicine: From current progress to future Perspectives and beyond

BACKGROUND

The emergence of carbon dots (CDs) as anticancer agents had sparked a transformation in cancer research and treatment strategies. These fluorescent CDs, initially introduced in the early 2000 s, possess exceptional biocompatibility, tunable fluorescence, and surface modification capabilities, positioning them as promising tools in biomedical applications.

AIM OF REVIEW

The review encapsulates the transformative trajectory of green CDs as future anticancer nanomedicine, poised to redefine the strategies employed in the ongoing fight against cancer.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The versatility of CDs was rooted in their various synthesis approaches and sustainable strategies, enabling their adaptability for diverse therapeutic uses. In vitro studies had showcased CDs' selective cytotoxicity against cancer cells while sparing healthy counterparts, forming the basis for targeted therapeutic potential. This selectivity had been attributed to the reactive oxygen species (ROS) generation, which opened avenues for targeted interventions. The role of CDs in combination therapies, synergizing with chemotherapy, radiotherapy, and targeted approaches was then investigated to heighten their anticancer efficacy. Notably, in vivo studies highlight CDs' remarkable biocompatibility and minimal side effects, endorsing their translational promise. Integration with conventional cancer treatments such as chemotherapy, radiotherapy, and immunotherapy amplified the versatility and effectiveness of CDs. The exploration of CDs' applications in photo-induced treatments further solidified their significance, positioning them as photosensitizers (PS) in photodynamic therapy (PDT) and photothermal agents (PA) in photothermal therapy (PTT). In PDT, CDs triggered the generation of ROS upon light exposure, facilitating cancer cell elimination, while in PTT, they induced localized hyperthermia within cancer cells, enhancing therapeutic outcomes. In vitro and in vivo investigations validated CDs' efficacy in PDT and PTT, affirming their potential for integration into combination therapies. Looking ahead, the future of CDs in anticancer treatment encompasses bioavailability, biocompatibility, synergistic treatments, tumor targeting, artificial intelligence (AI) and robotics integration, personalized medicine, and clinical translation. This transformative odyssey of CDs as future anticancer agents is poised to redefine the paradigm of cancer treatment strategies.

Synthesis of Yellow Fluorescence Carbon Dots for the Applications of Vitamin B12 Detection and Cell Imaging

In this work, bright yellow fluorescent and multifunctional carbon dots (N-CDs) were prepared by hydrothermal method from O-phenylenediamine and 4-aminobenzoic acid. The fluorescence characterization showed that the N-CDs possessed good optical properties (QY = 32%) and excitation dependent multi-color emission. By exciting with 390 nm, the strong selective interaction of VB12 with N-CDs could result in a sharp decrease in the luminescence of N-CDs at 567 nm. An efficient fluorescence sensor in aqueous solution was constructed which could linearly respond VB12 in wide concentration ranges of 0-90 μM and 140-250 μM. The linear correlation coefficients of N-CDs and VB12 were 0.9950 and 0.9968, respectively, and the detection limit was 0.119 μM. N-CDs were performed for sensitive determination of VB12 in real samples. Moreover, the N-CDs were exploited to image cell. This N-CDs was a sensitive fluorescence probe to monitor VB12 and presented prospective potential in living cells imaging. Schematic diagram of the synthesis process and application research of N-CDs.

A recent update on development, synthesis methods, properties and application of natural products derived carbon dots

Natural resources are practically infinitely abundant in nature, which stimulates scientists to create new materials with inventive uses and minimal environmental impact. Due to the various benefits of natural carbon dots (NCDs) from them has received a lot of attention recently. Natural products-derived carbon dots have recently emerged as a highly promising class of nanomaterials, showcasing exceptional properties and eco-friendly nature, which make them appealing for diverse applications in various fields such as biomedical, environmental sensing and monitoring, energy storage and conversion, optoelectronics and photonics, agriculture, quantum computing, nanomedicine and cancer therapy. Characterization techniques such as Photoinduced electron transfer, Aggregation-Induced-Emission (AIE), Absorbance, Fluorescence in UV-Vis and NIR Regions play crucial roles in understanding the structural and optical properties of Carbon dots (CDs). The exceptional photoluminescence properties exhibited by CDs derived from natural products have paved the way for applications in tissue engineering, cancer treatment, bioimaging, sensing, drug delivery, photocatalysis, and promising remarkable advancements in these fields. In this review, we summarized the various synthesis methods, physical and optical properties, applications, challenges, future prospects of natural products-derived carbon dots etc. In this expanding sector, the difficulties and prospects for NCD-based materials research will also be explored.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

Green synthesis of gardenia seeds-based carbon dots for bacterial imaging and antioxidant activity in aqueous and oil samples

In this work, luminescent carbon dots with gardenia seeds as carbon precursors (GCDs) were synthesized using a one-step mild pyrolysis process and were then used as probes for imaging of bacterial (Escherichia coli). The GCDs showed a strong emission at 430 nm when excited at 370 nm. The relative fluorescence quantum yield of GCDs was found to be 1.13% in an aqueous medium. Rapid internalization of the GCDs by bacteria was confirmed by three colors (blue, green, and yellow) images that were obtained using confocal fluorescence microscopy. In addition, GCDs were noted to exhibit potent scavenging activities against DPPH˙, ˙OH, and ˙O2- free radicals. GCDs were also assayed as antioxidants in an oil sample by volumetric determination of the peroxide value. Thus, GCDs exhibited good antioxidant properties both in aqueous and oil media. In addition, a free fatty acid quantification kit in the presence of GCDs showed enhanced fluorescence detection of palmitic acid with a remarkably good limit of detection of 0.08 μM, which is lower than that in the absence of GCDs (0.76 μM). The proposed fluorescence method was then successfully used to determine the concentration of palmitic acid spiked in milk powder samples, with spiked recoveries of 82.6-109.6% and relative standard deviations of 0.9-4.6%.

Plant Extract-Derived Carbon Dots as Cosmetic Ingredients

Plant extract-derived carbon dots (C-dots) have emerged as promising components for sustainability and natural inspiration to meet consumer demands. This review comprehensively explores the potential applications of C-dots derived from plant extracts in cosmetics. This paper discusses the synthesis methodologies for the generation of C-dots from plant precursors, including pyrolysis carbonization, chemical oxidation, hydrothermal, microwave-assisted, and ultrasonic methods. Plant extract-derived C-dots offer distinct advantages over conventional synthetic materials by taking advantage of the inherent properties of plants, such as antioxidant, anti-inflammatory, and UV protective properties. These outstanding properties are critical for novel cosmetic applications such as for controlling skin aging, the treatment of inflammatory skin conditions, and sunscreen. In conclusion, plant extract-derived C-dots combine cutting-edge nanotechnology and sustainable cosmetic innovation, presenting an opportunity to revolutionize the industry by offering enhanced properties while embracing eco-friendly practices.

Red emitting carbon dots: surface modifications and bioapplications

Quantum dots (QDs), and carbon quantum dots (CDs) in particular, have received significant attention for their special characteristics. These particles, on the scale of several nanometers, are often produced using simple and green methods, with naturally occurring organic precursors. In addition to facile production methods, CDs present advantageous applications in the field of medicine, primarily for bioimaging, antibacterial and therapeutics. Also, CDs present great potential for surface modification through methods like doping or material mixing during synthesis. However, the bulk of current literature focuses on CDs emitting in the blue wavelengths which are not very suitable for biological applications. Red emitting CDs are therefore of additional interest due to their brightness, photostability, novelty and deeper tissue penetration. In this review article, red CDs, their methods of production, and their biological applications for translational research are explored in depth, with emphasis on the effects of surface modifications and doping.

Metal-organic frameworks/metal nanoparticles as smart nanosensing interfaces for electrochemical sensors applications: a mini-review

Metal-organic frameworks (MOFs) are porous materials with huge specific surface area and abundant active sites, which are composed of metal ions or clusters and organic ligands in the form of coordination bonds. In recent years, MOFs have been successfully applied in many fields due to their excellent physical, chemical, and biological properties. Electrochemical sensors have advantages such as economy, portability, and sensitivity, making them increasingly valued in the field of sensors. Many studies have shown that the electrode materials will affect the performance of electrochemical sensors. Therefore, the research on electrode materials is still one of the hotspots. MOFs are also commonly used to construct electrochemical sensors. However, electrochemical sensors prepared from single MOFs have shortcomings such as insufficient conductivity, low sensitivity, and poor electrochemical catalytic ability. In order to compensate for these defects, a new type of nanocomposite material with very ideal conductivity was formed by adding metal nanoparticles (MNPs) to MOFs. The combination of the two is expected to be widely applied in the field of sensors. This review summarizes the applications of various MNPs/MOFs composites in the field of electrochemical sensors and provides some references for the development of MNPs/MOFs composites-based electrochemical sensors in the future.

Highly luminescent nitrogen and sulfur co-doped carbon dots for Sn2+ and S2- sensing and dual-mode anti-counterfeiting

The preparation of nitrogen and sulfur co-doped carbon dots (N, S-CDs) with highly bright orange-red fluorescence is reported through a facile solvothermal approach with naphthalenetetracarboxylic dianhydride as starting material. The N, S-CDs exhibited superior properties, including intense long-wavelength emission with a narrow full width at half maxima (FWHM) of 33 nm, high fluorescence quantum yield (QY) of 60.5% in aqueous solution, excitation-independent emission behavior, and excellent water dispersibility. In addition, sulfide ions (S^2-) could selectively recover the fluorescence of N, S-CDs quenched by Sn²⁺. The selective experiment suggested that the N, S-CDs/Sn²⁺ complex could be used as a fluorescence-enhancement sensor for sulfide ions (S^2-), with the linear range of 5-50 μM and the LOD of 0.35 μM. The practicality and feasibility of this sensor for the determination of sulfide ions in tap and lake water were verified with good recoveries. Furthermore, because of their highly bright fluorescence and strong water solubility, the N, S-CDs could be easily fabricated into fluorescent ink and transparent films, demonstrating the promising application in anti-counterfeiting. Therefore, the designed N, S-CDs exhibited the advantages of facile preparation, intense fluorescence, high stability, easy processing, and selective fluorescence change for specific analytes, which showed high potential in fluorescence detection and anti-counterfeiting.

Rapid and sensitive determination of Piroxicam by N-doped carbon dots prepared by plant soot

Piroxicam (PX) as a nonsteroidal anti-inflammatory drug (NSAID) can be effectively used for anti-inflammatory and analgesia. However, overdoses may induce side effects such as gastrointestinal ulcers and headaches. Therefore, the assay of piroxicam has considerable significance. In this work, nitrogen-doped carbon dots (N-CDs) was synthesized for PX detection. The fluorescence sensor was fabricated by hydrothermal method with plant soot and ethylenediamine. The strategy exhibited a detection range of 6-200 μg/mL and 250-700 μg/mL with the limited detection of 2 μg/mL. The mechanism of the PX assay base on the fluorescence sensor was the process of electron transfer between the PX and N-CDs. The assay subsequently demonstrated could be successfully used in actual sample. The results indicated that the N-CDs could be a superior candidate nanomaterial for piroxicam monitoring in the healthcare product industry.

Green Carbon Dots: Applications in Development of Electrochemical Sensors, Assessment of Toxicity as Well as Anticancer Properties

Carbon dots are one of the most promising nanomaterials which exhibit a wide range of applications in the field of bioimaging, sensing and biomedicine due to their ultra-small size, high photostability, tunable fluorescence, electrical properties, etc. However, green carbon dots synthesized from several natural and renewable sources show some additional advantages, such as favorable biocompatibility, wide sources, low cost of production and ecofriendly nature. In this review, we will provide an update on the latest research of green carbon dots regarding their applications in cancer therapy and in the development of electrochemical sensors. Besides, the toxicity assessment of carbon dots as well as the challenges and future direction of research on their anticancer and sensing applications will be discussed.

Resculpting carbon dots via electrochemical etching

Substantial efforts are directed into exploring the structure-properties relationships of photoluminescent Carbon dots (C-dots). This study unravels a resculpting mechanism in C-dots that is triggered by electrochemical etching and proceeds via extensive surface oxidation and carbon-carbon breakage. The process results in the gradual shrinkage of the nanoparticles and can enhance the quantum yield by more than half order of magnitude compared to the untreated analogues.

Polysaccharide-based C-dots and polysaccharide/C-dot nanocomposites: fabrication strategies and applications

C-dots are a new class of materials with vast applications. The synthesis of bio-based C-dots has attracted increasing attention in recent years. Polysaccharides being the most abundant natural materials with high biodegradability and no toxicity have been the focus of researchers for the synthesis of C-dots. C-dots obtained from polysaccharides are generally fabricated via thermal procedures, carbonization, and microwave pyrolysis. Small size, photo-induced electron transfer (PET), and highly adjustable luminosity behavior are the most important physical and chemical properties of C-dots. However, C-dot/polysaccharide composites can be introduced as a new generation of composites that combine the features of both C-dots and polysaccharides having a wide range of applications in biomedicines, biosensors, drug delivery systems, etc. This review demonstrates the features, raw materials, and methods used for the fabrication of C-dots derived from different polysaccharides. Furthermore, the properties, applications, and synthesis conditions of various C-dot/polysaccharide composites are discussed in detail.

Long pepper (Piper longum) derived carbon dots as fluorescent sensing probe for sensitive detection of Sudan I

In this piece of work, microwave-assisted conversion of a natural precursor in to high-valued nano-scale material was carried out by a completely greener method. The fluorescent carbon dots prepared, designated as long pepper derived carbon dots (LPCDs), have been thoroughly characterized to explore the physical and chemical properties. The system exhibits excitation dependent emission behavior and from the optimal studies the excitation and emission wavelength of the system was found to be 330 nm and 455 nm respectively. On account of the superior fluorescent behavior of the LPCDs, it was successfully employed as a fluorescent sensing probe to detect Sudan I with good level of selectivity and sensitivity. This carcinogenic dye extensively used as food adulterant can impart several health issues. Food product safety is of high concern, therefore a simple facile and economical analytical method was proposed based on the fluorescence of LPCDs for this dye detection with satisfactory statistical parameters. A linear relationship was maintained in the range of 0 to 27.27 μM Sudan I with limit of detection of 0.92 μM. The quenching mechanism was studied and finally attributed to Förster resonance energy transfer (FRET) mechanism. In addition, the probe was effectively implemented for Sudan I detection in commercial chili powder samples with good level of recovery parameters.

Microwave-assisted green synthesis of carbon dots derived from wild lemon (Citrus pennivesiculata) leaves as a fluorescent probe for tetracycline sensing in water

Herein, we report an eco-friendly biomass based completely greener microwave assisted synthesis of carbon dots from wild lemon leaves having superior photo-luminescent properties with moderately good quantum yield. The carbon dots synthesized (LLCDs) were characterized by high resolution transmission electron microscopy, fluorescent, UV-vis absorption, Fourier transform infrared and Raman spectroscopic techniques. The quenching of native fluorescence of LLCDs observed with tetracycline antibiotic was made use to make it as a fluorescent probe. Tetracycline is widely used as a drug to treat various bacterial infections and as a growth promoter in variety of farming fields like aquaculture and feedstock's. The excessive usage of this antibiotic in farming fields caused severe water pollution and micro level detection of tetracycline in water system is highly demanded for the protection of health and environment. Based on the selective interaction of tetracycline with LLCDs, a simple and cost effective analytical method was proposed to detect tetracycline in water with satisfactory parameters. The limit of detection is 0.42 µM with a linear range of 0 to 27. 27 µM. The mechanism of quenching was investigated through various experiments and finally accredited to static quenching. Furthermore, the same method has been practically applied for tetracycline detection in natural water resources with acceptable recoveries ranging from 95.56 % to 101.93 %.

Recent progress of biocompatible carbon dots in hypoxia-related fields

Almost all eukaryotes need oxygen to maintain regular physiological activities. When the organism is under hypoxic situation for a persistent or periodic, it will induce irreversible physiological disorders and even pathological results. Hypoxia is closely related to the pathogenesis of metabolic diseases, cancer, chronic heart disease and kidney disease, myocardial ischemia, as well as reproductive diseases like preeclampsia and endometriosis. Therefore, monitoring and treatment of hypoxia have important implications for the pathophysiology of human-related diseases. Carbon dots (CDs) are emerging nanomaterials developed after 2004 with excellent performance, and have broad application potential in variousdomains likeoptical, biomedicine, energy. Advanced hypoxia therapeutics should be integrated with monitoring and treatment, and CDs with excellent performance are good potential options when sensing is combined with various therapeutic methods. Some researchers have also begun to carry out research in related fields and achieved some results. This article aims to clarify the various applications of CDs in hypoxia-related fields in recent years, including hypoxia sensing and hypoxia tumor theranostics. Finally, the possible challenges and prospects for the application of CDs in hypoxia-related fields are discussed.

Flexible and Stretchable Carbon-Based Sensors and Actuators for Soft Robots

In recent years, the emergence of low-dimensional carbon-based materials, such as carbon dots, carbon nanotubes, and graphene, together with the advances in materials science, have greatly enriched the variety of flexible and stretchable electronic devices. Compared with conventional rigid devices, these soft robotic sensors and actuators exhibit remarkable advantages in terms of their biocompatibility, portability, power efficiency, and wearability, thus creating myriad possibilities of novel wearable and implantable tactile sensors, as well as micro-/nano-soft actuation systems. Interestingly, not only are carbon-based materials ideal constituents for photodetectors, gas, thermal, triboelectric sensors due to their geometry and extraordinary sensitivity to various external stimuli, but they also provide significantly more precise manipulation of the actuators than conventional centimeter-scale pneumatic and hydraulic robotic actuators, at a molecular level. In this review, we summarize recent progress on state-of-the-art flexible and stretchable carbon-based sensors and actuators that have creatively added to the development of biomedicine, nanoscience, materials science, as well as soft robotics. In the end, we propose the future potential of carbon-based materials for biomedical and soft robotic applications.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

Natural resources for sustainable synthesis of nanomaterials with anticancer applications: A move toward green nanomedicine

Today, researchers have focused on the application of environmentally-benign and sustainable micro- and nanosystems for drug delivery and cancer therapy. Compared to conventional chemotherapeutics, advanced micro- and nanosystems designed by applying abundant, natural, and renewable feedstocks have shown biodegradability, biocompatibility, and low toxicity advantages. However, important aspects of toxicological assessments, clinical translational studies, and suitable functionalization/modification still need to be addressed. Herein, the benefits and challenges of green nanomedicine in cancer nanotherapy and targeted drug delivery are cogitated using nanomaterials designed by exploiting natural and renewable resources. The application of nanomaterials accessed from renewable natural resources, comprising metallic nanomaterials, carbon-based nanomaterials, metal-organic frameworks, natural-derived nanomaterials, etc. for targeted anticancer drug delivery and cancer nanotherapy are deliberated, with emphasis on important limitations/challenges and future perspectives.

Chitosan-Based Carbon Dots with Applied Aspects: New Frontiers of International Interest in a Material of Marine Origin

Carbon dots (CDs) have attracted significant research attention worldwide due to their unique properties and advantageous attributes, such as superior optical properties, biocompatibility, easy surface functionalization, and more. Moreover, biomass-derived CDs have attracted much attention because of their additional advantages related to more environmentally friendly and lower-cost synthesis. In this respect, chitosan has been recently explored for the preparation of CDs, which in comparison to other natural precursors exhibited additional advantages. Beyond the benefits related to the eco-friendly and abundant nature of chitosan, using it as a nanomaterial precursor offers additional benefits in terms of structure, morphology, and dopant elements. Furthermore, the high content of nitrogen in chitosan allows it to be used as a single carbon and nitrogen precursor for the preparation of N-doped CDs, significantly improving their fluorescent properties and, therefore, their performances. This review addresses the most recent advances in chitosan-based CDs with a special focus on synthesis methods, enhanced properties, and their applications in different fields, including biomedicine, the environment, and food packaging. Finally, this work also addresses the key challenges to be overcome to propose future perspectives and research to unlock their great potential for practical applications.

Sustainable synthesis of biomass-derived carbon quantum dots and their catalytic application for the assessment of α,β-unsaturated compounds

Herein, we demonstrate a simple, reproducible, and environment-friendly strategy for the synthesis of carbon quantum dots (CQDs) utilizing the mango (Mangifera indica) kernel as a renewable green carbon source. Various analytical tools characterized the as-prepared CQDs. These fluorescent CQDs showed significant water solubility with a uniform size of about 6 nm. The as-synthesized CQDs show significantly enhanced catalytic activity for the production of α,β-unsaturated compounds from the derivatives of aromatic alkynes and aldehydes under microwave irradiation in aqueous media. A potential mechanistic pathway and role of carboxylic functionalities were also revealed via various control experiments. The protocol shows outstanding selectivity towards the assessment of α,β-unsaturated compounds over other possible products. A comparative evaluation suggested the as-synthesized CQDs show higher catalytic activity under microwave radiation as compared to the conventional ways. These recyclable CQDs represent a sustainable alternative to metals in synthetic organic chemistry. A cleaner reaction profile, low catalyst loading, economic viability and recyclability of the catalyst, atom economy, and comprehensive substrate applicability are additional benefits of the current protocol according to green chemistry.

Recent advances in green carbon dots (2015-2022): synthesis, metal ion sensing, and biological applications

Carbon dots (CDs) show extensive potential in various fields such as sensing, bioimaging, catalysis, medicine, optoelectronics, and drug delivery due to their unique properties, that is, low cytotoxicity, cytocompatibility, water-solubility, multicolor wavelength tuned emission, photo-stability, easy modification, strong chemical inertness, etc. This review article especially focuses on the recent advancement (2015-2022) in the green synthesis of CDs, their application in metal ions sensing and microbial bioimaging, detection, and viability studies as well as their applications in pathogenic control and plant growth promotion.

Biobased carbon dots production via hydrothermal conversion of microalgae Chlorella pyrenoidosa

A promising green hydrothermal process was used to produce biobased nanomaterials carbon dots (CDs) by using microalgae Chlorella pyrenoidosa (CP) and its main model compounds (i.e., glucose, glycine, and octadecanoic acid). The possible reaction pathway including hydrolysis, Amadori rearrangement, cyclization/aromatization, and polymerization was first proposed for the hydrothermal process to produce microalgae-based CDs. Interactions among carbohydrates and proteins in microalgae were vital intermediate reactions in the generation of CDs. The mass yield of CDs reached 7.2% when the CP was hydrothermally treated with 20:1 of liquid-to-solid ratio at 230 °C for 6 h. It was confirmed that nitrogen, sulfur, phosphorous, and potassium were doped onto CP-based CDs (CD-CP) successfully without additional reagents or treatments. The CD-CP yield was 4.0-24.3 times higher than that of model compound-based CDs. Regarding morphology, CD-CP was constituted by many spherical nanoparticles smaller than 20 nm. These CDs emitted blue fluorescence under ultraviolet light, and the fluorescence quantum yield of CD-CP was 4.7-9.4 times higher than that of CP model compound-based CDs. Last, CD-CP displayed broad application prospects as a sensor for Fe³⁺ detection in wastewater with high sensitivity.

Carbon nanostructures: a comprehensive review of potential applications and toxic effects

There is no doubt that nanotechnology has revolutionized our life since the 1970s when it was first introduced. Nanomaterials have helped us to improve the current products and services we use. Among the different types of nanomaterials, the application of carbon-based nanomaterials in every aspect of our lives has rapidly grown over recent decades. This review discusses recent advances of those applications in distinct categories, including medical, industrial, and environmental applications. The first main section introduces nanomaterials, especially carbon-based nanomaterials. In the first section, we discussed medical applications, including medical biosensors, drug and gene delivery, cell and tissue labeling and imaging, tissue engineering, and the fight against bacterial and fungal infections. The next section discusses industrial applications, including agriculture, plastic, electronic, energy, and food industries. In addition, the environmental applications, including detection of air and water pollutions and removal of environmental pollutants, were vastly reviewed in the last section. In the conclusion section, we discussed challenges and future perspectives.

Visualization of Zika Virus Infection via a Light-Initiated Bio-Orthogonal Cycloaddition Labeling Strategy

Zika virus (ZIKV) is a re-emerging flavivirus that leads to devastating consequences for fetal development. It is crucial to visualize the pathogenicity activities of ZIKV ranging from infection pathways to immunity processes, but the accurate labeling of ZIKV remains challenging due to the lack of a reliable labeling technique. We introduce the photo-activated bio-orthogonal cycloaddition to construct a fluorogenic probe for the labeling and visualizing of ZIKV. Via a simple UV photoirradiation, the fluorogenic probes could be effectively labeled on the ZIKV. We demonstrated that it can be used for investigating the interaction between ZIKV and diverse cells and avoiding the autofluorescence phenomenon in traditional immunofluorescence assay. Thus, this bioorthogonal-enabled labeling strategy can serve as a promising approach to monitor and understand the interaction between the ZIKV and host cells.

Sensor Heavy Metal from Natural Resources for a Green Environment: A Review Relation Between Synthesis Method and Luminescence Properties of Carbon Dots

Carbon dots are 10-nm nanomaterial classes as excellent candidates in various applications: physics, biology, chemistry, and food science due to high stable biocompatibility and high surface expansive. Carbon dots (CDs) produced from natural materials have received wide attention due to their unique benefits, easy availabilities, sufficient costs, and harmless to the ecosystem. The various properties of CDs can be obtained from various synthesis methods: hydrothermal, microwave-assisted, and pyrolysis. The CDs have shown enormous potential in metal particle detection, colorimetric sensors, electrochemical sensors, and pesticide sensor. This review provides systematic information on a synthesis method based on natural resources and the application to the environmental sensors for supporting the clean environment. We hopefully this review, useful as a reference source in providing the guidance or roadmap of new researchers to develop new strategy in increasing luminescence properties CDs for multi detection of heavy metal in the environment.

Optical Detection of Acetone Using "Turn-Off" Fluorescent Rice Straw Based Cellulose Carbon Dots Imprinted onto Paper Dipstick for Diabetes Monitoring

Persistent bad breath has been reported as a sign of serious diabetes health conditions. If an individual's breath has a strong odor of acetone, it may indicate high levels of ketones in the blood owing to diabetic ketoacidosis. Thus, acetone gas in the breath of patients with diabetes can be detected using the current easy-to-use fluorescent test dipstick. In another vein, rice straw waste is the most well-known solid pollutant worldwide. Thus, finding a simple technique to change rice straw into a valuable material is highly important. A straightforward and environmentally friendly approach for reprocessing rice straw as a starting material for the creation of fluorescent nitrogen-doped carbon dots (NCDs) has been established. The preparation process of NCDs was carried out via one-pot hydrothermal carbonization using NH₄OH as a passivation substance. A testing strip was developed on the basis of cellulose CD nanoparticles (NPs) immobilized onto cellulose paper assay. The NCDs demonstrated a quantum yield of 23.76%. A fluorescence wavelength was detected at 443 nm upon applying an excitation wavelength of 354 nm. NCDs demonstrated remarkable selectivity for acetone gas as their fluorescence was definitely exposed to quenching by acetone as a consequence of the inner filter effect. A linear correlation was observed across the concentration range of 0.5-150 mM. To detect and measure acetone gas, the present cellulose paper strip has a "switch off" fluorescent signal. A readout limit was accomplished for an aqueous solution of acetone as low as 0.5 mM under ambient conditions. The chromogenic fluorescence of the cellulose assay responsiveness depends on the fluorescence quenching characteristic of the cellulose carbon dots in acetone. A thin fluorescent cellulose carbon dot layer was deposited onto the surface of cellulose strips by a simple impregnation process. CDs were made using NP morphology and analyzed using infrared spectroscopy and transmission electron microscopy. The carbon dot distribution on the paper strip was evaluated by scanning electron microscope and energy-dispersive X-ray analysis. The absorption and fluorescence spectral analyses were investigated. The paper sheets' mechanical qualities were also examined.

Recent Advances in Carbon Dots for In Vitro/Vivo Fluorescent Bioimaging: A Mini-Review

As a new type of “zero-dimensional” fluorescent carbon nanomaterials, carbon dots (CDs) have some unique optical and chemical properties, they are being explored for a variety of applications in bio-related fields, such as bioimaging, biosensors, and therapy. This review mainly summarizes the recent progress of CDs in bioimaging. The overview of this review can be roughly divided into two categories: (1) In vitro bioimaging based on CDs in different cells and important organelles. (2) The distribution, imaging and application of CDs in mice and zebrafish. In addition, this review also points out the potential advantages and future development directions of CDs for bioimaging, which may promote the development of CDs in the field of bioimaging.

Lignocellulosic Biomass Waste-Derived Cellulose Nanocrystals and Carbon Nanomaterials: A Review

Rapid population and economic growth, excessive use of fossil fuels, and climate change have contributed to a serious turn towards environmental management and sustainability. The agricultural sector is a big contributor to (lignocellulosic) waste, which accumulates in landfills and ultimately gets burned, polluting the environment. In response to the current climate-change crisis, policymakers and researchers are, respectively, encouraging and seeking ways of creating value-added products from generated waste. Recently, agricultural waste has been regularly appearing in articles communicating the production of a range of carbon and polymeric materials worldwide. The extraction of cellulose nanocrystals (CNCs) and carbon quantum dots (CQDs) from biomass waste partially occupies some of the waste-recycling and management space. Further, the new materials generated from this waste promise to be effective and competitive in emerging markets. This short review summarizes recent work in the area of CNCs and CQDs synthesised from biomass waste. Synthesis methods, properties, and prospective application of these materials are summarized. Current challenges and the benefits of using biomass waste are also discussed.

Double-signal quantification of amoxicillin based on interaction with 4-aminoantipyrine at copper and nitrogen co-doped carbon quantum dots as an artificial nanozyme

An one-pot hydrothermal method was developed for synthesis of carbon quantum dots co-doped with copper and nitrogen (Cu, N@CQDs). The synthesized Cu, N@CQDs has unique advantages such as high fluorescence quantum yield (39.1%) and high catalytic activity. Oxidative coupling of amoxicillin (AMX) with 4-aminoantipyrine (4-NH₂-APE) in the presence of H₂O₂ as an oxidant to produce pink quinoneimine chromogen was carried out with the aid of Cu, N@CQDs as a peroxidase-like catalyst. This system was used for the colorimetric and fluorometric assays of AMX with reliable results. Colorimetric method is based on the measurement of a pink-colored product at λ_max = 505 nm while the fluorometric assay is based on the quenching of the fluorescence emission of Cu, N@CQDs at 440 nm after excitation at 370 nm. For the colorimetric method, the absorption intensity linearly increased over the concentration range 4.3-110.0 µM with LOD (S/N = 3) of 1.3 µM. For the fluorometric method, the emission intensity of Cu, N@CQDs linearly decreased upon addition of AMX in the concentration range 0.2-120.0 µM with a limit of detection (LOD, S/N = 3) of 0.06 µM. The proposed system was applied to the determination of AMX in different real samples such as pharmaceutical capsules, human serum, milk, and conduit water samples with recoveries in the range 95.8-104.1% and relative standard deviation (RSD %) less than 4.1%.

Yeast powder derived carbon quantum dots for dopamine detection and living cell imaging

Dopamine (DA) is an important neurotransmitter in the brain of mammals. There is a critical need for fast and sensitive determination approaches to monitor these potential diseases due to various weaknesses in clinical trials of the existing methods for DA detection. DA can effectively quench the fluorescence of carbon quantum dots (CDs) through the inner filter effect and static quenching. In this work, fluorescent yeast CDs (Y-CDs) were prepared via a simple hydrothermal approach of using yeast powder and regarded as the fluorescent nanoprobe to directly monitor the DA concentration. The as-prepared detection platform exhibited excellent sensitivity and selectivity toward DA with a low detection limit of 30 nM and a wide linear range of 0.05-150 μM. Benefiting from these outstanding features, the developed label-free method has been successfully applied for fast DA detection in human serum samples with satisfactory recoveries. Furthermore, it demonstrated that the Y-CDs were well suitable for live cell imaging and showed low toxicity toward MCF-7 cells. Consequently, this work will facilitate the great potential of the versatile Y-CDs in developing biosensors for clinical diagnosis and other biological applications.