Highly selective electrochemical detection of diphenylamine in apple samples using rod shaped CuCo2O4 derived from bimetallic organic frameworks

Voltammetric nano-molar range quantification of agrochemical pesticide using needle-like strontium pyrophosphate embedded on sulfur doped graphitic carbon nitride electrocatalyst

The development of a viable sensor for agrochemical pesticides requires the assessment of trace levels. To achieve this, we developed a diphenylamine (DPA) sensor using needle-like strontium pyrophosphate embedded in sulfur-doped graphitic carbon nitride (SrPO/SCN). We obtained needle-like SrPO/SCN nanocomposite through co-precipitation followed by ultrasonication. The formation of the SrPO/SCN nanocomposite was verified through FT-IR, XRD, XPS, SEM-EDX, and HR-TEM analyses. Additionally, we explored their electrochemical behavior towards DPA using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The SrPO/SCN nanocomposite-modified electrode exhibited a higher anodic peak current (15.47 µA) than those of the other modified and unmodified electrodes. Under optimal experimental conditions, SrPO/SCN/GCE demonstrated a good limit of detection (0.009 µmol/L), dynamic linear range (0.05-98 µmol/L), and sensitivity (0.36 µAµM-1cm-2). Furthermore, the developed sensor exhibited excellent reproducibility, selectivity, and stability, and successfully detected DPA in real samples, including pear and apple samples, with good recoveries.

Highly Luminescent Eu3+-Incorporated Zr-MOFs as Fluorescence Sensors for Detection of Hazardous Organic Compounds in Water and Fruit Samples

Considering the risk of toxic organic compounds to both human health and the environment, highly luminescent Eu3+-incorporated amino-functionalized zirconium metal-organic frameworks, namely, Eu/MOF and Eu@MOF were synthesized via the solvothermal method. The synthesized luminescent europium-incorporated MOFs act as outstanding sensor materials for diphenylamine and dinitrobenzene detection in water and fruit samples. The synergistic effect of Eu3+ metal ions and amino-functionalized MOFs enhances the luminescent properties of the MOFs improving the fluorescence sensing ability toward the analytes. The enhancement in the detection capacity of the Eu3+-incorporated sensors than the sole MOF toward toxic organic compounds was confirmed using the Stern-Volmer equation of limit of detection (LOD) measurements along with fluorescence lifetime measurements. The sensors exhibited turn-on fluorometric detection toward their respective analytes due to the inner filter effect. The plausible fluorescence sensing mechanism has been studied. The DFT calculations have been integrated to study the structure, stability, and charge transfer processes.

A disposable voltammetric sensor for the determination of diphenylamine using modified pencil graphite electrode

This study reports the electrochemical monitoring and sensing of diphenylamine (DPA), an anti-scald agent on a modified pencil graphite electrode (PGE). DPA is also a potentially toxic environmental pollutant. A polymer of tyrosine synthesized by electrochemical process was utilized for the determination of DPA in real samples. The electrodes were characterized using IR, SEM, EDAX, AFM and EIS analyses. As far as we know, this is first time reporting the utilization of modified PGE via green approach for the monitoring of DPA. A dynamic linear range of 1.00-117.11 µM with a lower detection limit (LOD) of 0.7050 µM was showed by this sensor for the electrochemical quantification of DPA. The electrochemical oxidation of DPA on the modified sensor followed a mixed adsorption -diffusion controlled kinetics. The sensor also showed good anti-interference property for the determination of DPA in real samples. Furthermore, the developed sensor was applied for the selective sensing of DPA from real apple extracts with good recovery. The real sample analysis was validated with standard spectrophotometric method.

Integration of iron-manganese layered double hydroxide/tungsten carbide composite: An electrochemical tool for diphenylamine H•+ analysis in environmental samples

Incompetent governance of post-harvest horticultural crops especially apples and pears lead to numerous physiological storage disorders. In order to manage this issue, diphenylamine (DPA) is widely used as an antioxidant and anti-scald agent to preserve fruits from superficial scalds and degradation during storage. As a result, this research focuses on utilizing disposable electrodes constructed with sphere-shaped iron-manganese layered double hydroxide (FeMn-LDH) entrapped tungsten carbide (WC) nanocomposite on its electrochemical performances towards emergent food contaminant, DPA. The importance of the current work is the selection and design of hierarchically structured functional materials especially layered double hydroxides, in virtue of their outstanding properties. These multi-dimensional structures when introduced to form a composite with the highly beneficial tungsten carbide offer excellent characteristics such as exceptional accessibility to active sites, enhanced surface area, and high mass transport and diffusion which serves as advantageous for the electrochemical quantification of DPA. Furthermore, the synergy between FeMn-LDH and WC nanomaterials contributes to the higher active surface area, increased electrical conductivity, fast electron transportation, and ion diffusion, resulting in static properties including a wide linear range (0.01-183.34 μM), low detection limit (1.1 nM), greater sensitivity, selectivity, and reproducibility thus confirming the potential capability of the WC@FeMn-LDH sensor towards the interference-free determination of DPA which validates its practicality and feasibility in real-time. Hence, this work aims to stimulate the fabrication of various advanced hierarchical structures by a simple hydrothermal approach that can have veracity of potential applications.

A label-free electrochemical sensor constructed with layer-by-layer assembly of GCE-AuNPs-Q[7]·HAuCl4 for detection of diphenylamine

Metal-organic frameworks (MOFs) including cucurbit[7]uril block (Q[7]·HAuCl₄) were employed to develop a diphenylamine (DPA) sensor in electrochemical method, the presence of HAuCl₄ improved the conductivity of the macrocyclic compound. To further enhance of the sensitivity, Au nanoparticles were inserted between the surface of glassy carbon electrode and Q[7]·HAuCl₄ MOFs (GCE-AuNPs-Q[7]·HAuCl₄). Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were applied for evaluation on the electrochemical behavior. For the electrochemical inertness of DPA, a label-free electrochemical sensor in 5 mM K₃[Fe(CN)₆] solution was achieved, to produce a limit of detection as low as 4.6 µM in a linear range of 5-1000 µM with good reproducibility, high stability and acceptable anti-interference ability. Application of the proposed electrode for the quantitative determination of DPA in tap water and apple juice confirms its real value.

Surfactant-Assisted Synthesis of Praseodymium Orthovanadate Nanofiber-Supported NiFe-Layered Double Hydroxide Bifunctional Catalyst: The Electrochemical Detection and Degradation of Diphenylamine

Physiological storage disorders are caused by ineffective post-harvest handling of horticultural crops, particularly fruits. To address these post-harvest concerns, diphenylamine (DPAH^•+) is widely used as a preservative to prevent fruit degradation and surface scald during storage around the world. Humans are negatively affected by the use of high concentrations of DPAH^•+ because of the various health complications related to its exposure. As a result, accurate detection and quantification of DPAH^•+ residues in treated fruits are critical. Rare earth metal orthovanadates, which have excellent physical and chemical properties, are potential materials for electrochemical sensors in this area. Herein, we present a simple and direct ultrasonication technique for the surfactant-assisted synthesis of praseodymium orthovanadate (PrVO₄ or PrV) loaded on nickel iron layered double hydroxide (NiFe-LDH) synthesized with deep eutectic solvent assistance, as well as its application as an effective catalyst in the detection and degradation of DPAH^•+ in fruits and water samples. The current work presents supreme electrochemical features of a PrV@NiFe-LDH-modified screen-printed carbon electrode (SPCE) where cetyltrimethylammonium bromide (CTAB) surfactant-driven fabrication of PrV directs the formation of highly qualified engineered structures and the deep eutectic solvent based green synthesis of NiFe-LDH creates hierarchical lamellar structures following the principles of green chemistry. PrV and NiFe-LDH combine to produce a synergistic effect that improves the number of active sites, charge transfer kinetics, and electronic conductivity. Differential pulse voltammetry analysis of PrV@NiFe-LDH/SPCE reveals a dynamic working range (0.005-226.26 μM), increased sensitivity (133.13 μA μM^-1 cm^-2), enhanced photocatalytic activity, and low detection limit (0.001 μM), which are considered significant when compared with the former reported electrodes in the literature for the determination of DPAḢ⁺ for its real-time applications.

Sustainable synthesis of AFe2O4 (A = Mg, Zn, Mn) catalysts: comparing the photooxidative and electrochemical properties towards organic dyes detection and degradation

By serving as alternatives to toxic and hazardous solvents, green solvents assist in implementing the idea of sustainability.