1
|
Zhong Y, Li Z, Zhang A, Peng Y, Zhou H, Wang B, Xie L, Guo Y. A molecularly imprinted electrochemical sensor MIP/Cu-MOF/rGO/AuNPs/GCE for highly sensitive detection of electroneutral organophosphorus pesticide residues. Mikrochim Acta 2024; 191:338. [PMID: 38780645 DOI: 10.1007/s00604-024-06420-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/29/2024] [Accepted: 05/05/2024] [Indexed: 05/25/2024]
Abstract
A novel electrochemical sensor, MIP/Cu-MOF/rGO/AuNPs/GCE, was developed by depositing gold nanoparticles, coating Cu-MOF/GO on the surface of glassy carbon electrode (GCE) before electroreducing graphene oxide (GO) to rGO and covering molecularly imprinted membrane by electropolymerization for highly sensitive detection of electroneutral organophosphorus pesticide residues in agricultural product. Cyclic voltammetry, differential pulse voltametry, scanning electron microscopy, energy-dispersive spectroscopy, and atomic force microscopy were used to characterize the imprinted sensor. Several key factors such as chitosan concentration, suspension volume, pH of polymerization solution, and polymerization scanning rate during preparation of the imprinted sensor were optimized in detail. When electroneutral phosmet was used as a template, the linear range of MIP/Cu-MOF/rGO/AuNPs/GCE for detecting phosmet was 1.00 × 10-14-5.00 × 10-7 mol/L with the limit of detection of 7.20 × 10-15 mol/L at working potentials of - 0.2 to 0.6 V. The selectivity, reproducibility, and repeatability of MIP/Cu-MOF/rGO/AuNPs/GCE were all acceptable. The recoveries of this method for determining phosmet in real samples ranged from 94.2 to 106.5%. The MIP/Cu-MOF/rGO/AuNPs/GCE sensor could be applied to detect electroneutral pesticide residues in organisms and agricultural products.
Collapse
Affiliation(s)
- Yujun Zhong
- College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, 410004, China
| | - Zhiyang Li
- College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, 410004, China
| | - Anlin Zhang
- College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, 410004, China
| | - Yuqing Peng
- College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, 410004, China
| | - Hao Zhou
- College of Material Science and Technology, Central South University of Forestry and Technology, Changsha, 410004, China
| | - Bin Wang
- College of Pharmaceutical and Bioengineering, Hunan Chemical Vocational Technology College, Zhuzhou, 412000, China
| | - Lianwu Xie
- College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, 410004, China.
- College of Material Science and Technology, Central South University of Forestry and Technology, Changsha, 410004, China.
| | - Yaping Guo
- College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, 410004, China.
| |
Collapse
|
2
|
Mishra S, Budania Y, Tyagi A, Pratap Singh S, Kumar P, Singh S. Copper Oxide Anchored Carbon Nanofibers: A Versatile Platform for Multiplex Detection of Antibiotics, Heavy Metals and Pesticides. Chem Asian J 2024; 19:e202400241. [PMID: 38441388 DOI: 10.1002/asia.202400241] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Indexed: 05/18/2024]
Abstract
Electrochemical sensors offer promising prospects for real-time pollutant monitoring. In this study, copper oxide-dispersed graphitic carbon nanofibers (CuO-CNFs) grown via chemical vapour deposition were employed as a robust platform for detecting a variety of environmental pollutants. This array-based sensor adeptly identifies three different classes of analytes, i. e., antibiotics (chloramphenicol (CP) and tylosin tartrate (TT)), heavy metals (cadmium (Cd) and lead (Pb)), and pesticides (quinalphos (QP) and imidacloprid (IP)). Electron collection is facilitated by a glassy carbon electrode, while various physico-electrochemical methods delve into the properties of CuO-CNFs. The CuO-CNF-modified GCE array rapidly discerns (<15 sec) a broad linear range: 1-20 ppm for CP, 1-13.33 ppm for TT, 0.66-11.66 ppm for Cd, 20-33.33 ppm for Pb, 1.6-11.6 ppm for QP, and 5-25 ppm for IP, boasting quantification limits of 1.0, 1.0, 0.66, 20.0, 1.6, and 5.0 ppm for CP, TT, Cd, Pb, QP, and IP, respectively. Notably, this sensor achieves simultaneous identification of mixed analytes, including CP and TT, Cd and Pb, and QP and IP, within real tap water. Furthermore, the electrochemical sensor exhibits robustness; heightened sensitivity, selectivity, and stability; a swift response; and impressive reproducibility in detecting CP, TT, Cd, Pb, QP, and IP within aqueous samples. Consequently, this array-based electrochemical sensor has emerged as a rapid and simultaneous detection tool for diverse pollutant residues in surface and groundwater samples.
Collapse
Affiliation(s)
- Smriti Mishra
- Industrial waste utilization, nano- and biomaterial division, CSIR- Advanced Materials and Processes Research Institute (CSIR-AMPRI), Hoshangabad Road, Bhopal, Madhya Pradesh, 462026, India
| | - Yashmeen Budania
- Industrial waste utilization, nano- and biomaterial division, CSIR- Advanced Materials and Processes Research Institute (CSIR-AMPRI), Hoshangabad Road, Bhopal, Madhya Pradesh, 462026, India
| | - Ankit Tyagi
- Department of Chemical Engineering, Indian Institute of Technology, Jammu, Jagti, Nagrota, Jammu & Kashmir, 181221, India
| | - Sheelendra Pratap Singh
- Pesticide toxicology laboratory & regulatory toxicology group, CSIR-Indian Institute of Toxicology Research (CSIR-IITR), Vishvigyan Bhawan, 31 Mahatma Gandhi Marg, Lucknow, 226001, Uttar Pradesh, India
- Analytical Chemistry Laboratory, CSIR-Indian Institute of Toxicology Research (CSIR-IITR), Vishvigyan Bhawan, 31 Mahatma Gandhi Marg, Lucknow, 226001, Uttar Pradesh, India
| | - Pradip Kumar
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
- Green engineered materials and additive manufacturing, Council of Scientific and Industrial Research- Advanced Materials and Processes Research Institute, Bhopal, 462026, India
| | - Shiv Singh
- Industrial waste utilization, nano- and biomaterial division, CSIR- Advanced Materials and Processes Research Institute (CSIR-AMPRI), Hoshangabad Road, Bhopal, Madhya Pradesh, 462026, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
| |
Collapse
|
3
|
Yang L, Hu W, Pei F, Du B, Tong Z, Mu X, Xia M, Wang F, Liu B. Novel dual-emission fluorescence imprinted sensor based on Mg, N-CDs and metal-organic frameworks for rapid and smart detection of 2, 4, 6-trinitrophenol. Talanta 2024; 266:125115. [PMID: 37657376 DOI: 10.1016/j.talanta.2023.125115] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2023] [Revised: 08/14/2023] [Accepted: 08/22/2023] [Indexed: 09/03/2023]
Abstract
Rapid and real-time detection of 2, 4, 6-trinitrophenol (TNP) is of great importance for the living environment and human health. Herein, we constructed an innovative ratiometric fluorescence imprinted sensor with fast response and high selectivity based on magnesium and nitrogen co-doped carbon dots (Mg, N-CDs) and chromium telluride quantum dots (r-CdTe) self-assembled in zirconium-based metal organic frameworks (UiO-66) combined with imprinted polymers for the detection of TNP. In the protocol, the introduction of UiO-66 with large specific surface area and porosity using as carrier material significantly enhanced the mass transfer rate, which improved the sensitivity of the Mg, N-CDs/r-CdTe@UiO-66@MIP (LHU@MIP). And the Mg, N-CDs with high quantum yields and r-CdTe were selected as fluorescence emitting elements to yield fluorescence signal, achieving signal amplification. The dual-channel strategy enabled the sensor to not only display a fast fluorescence response, but also generate a dual-response signal under the action of internal filtering effect (IFE). Combining these advantages, the LHU@MIP had a wide linear range (1-100 μM), good detection sensitivity (0.56 μM), and a distinct color change (from blue to pink). Meanwhile, for accurate on-site analysis, we designed a portable smart sensing platform with a color recognizer application. The smartphone enabled visual sensing of TNP by capturing fluorescent images and converting them into digital values. More importantly, the platform was successfully utilized for the analysis of TNP in the simulated actual samples with considerable results. Therefore, the developed platform was characterized by low cost, portability, ideal specificity, and provided a strategy for on-site monitoring of TNP.
Collapse
Affiliation(s)
- Lidong Yang
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, Jiangsu, China; State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China
| | - Wei Hu
- State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China
| | - Fubin Pei
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, Jiangsu, China; State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China
| | - Bin Du
- State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China
| | - Zhaoyang Tong
- State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China
| | - Xihui Mu
- State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China
| | - Mingzhu Xia
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, Jiangsu, China
| | - Fengyun Wang
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, Jiangsu, China.
| | - Bing Liu
- State Key Laboratory of NBC Protection for Civilian, Beijing, 102205, China.
| |
Collapse
|
4
|
Chen X, Sun Y, Wang W, Chen Z, Ming Z. Selective determination of cuprous ion in copper dissolving solution based on bathocuproine-modified expanded graphite electrode. ANAL SCI 2023; 39:1465-1473. [PMID: 37280484 DOI: 10.1007/s44211-023-00358-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2023] [Accepted: 05/01/2023] [Indexed: 06/08/2023]
Abstract
The presence of cuprous ions in the copper-dissolving solution significantly affects the microstructure of copper plated surface. Fewer quantitative analyses of cuprous ions in the copper foil productive process had rarely been involved so far. In the present work, a novel electrochemical sensor of the bathocuproine (BCP) modified expanded graphite (EG) electrode was developed for the selective determination of cuprous ions. EG has a large surface area, good adsorption, and excellent electrochemical performance which remarkably promoted analytical sensitivity. Meanwhile, the selective determination of the BCP-EG electrode for cuprous ions in the coexistence of ten thousand times of copper ions have been achieved on the benefit of the special coordination of BCP to cuprous ions. In the coexistence of 50 g/L copper ions, the analytical performance of the BCP-EG electrode for the determination of cuprous ions had been examined. The results represented a wide detection range of cuprous ions in the range of 1.0 μg/L-5.0 mg/L, with a low detection limit of 0.18 μg/L (S/N = 3) and the BCP-EG electrode has great selectivity to cuprous ions in presence of various interferences. The analytical selectively for cuprous ions supported by the proposed electrode would be a potential analytical tool for quality improvement in electrolytic copper foil manufacturing.
Collapse
Affiliation(s)
- Xiaohui Chen
- School of Chemistry and Material Engineering, Changzhou Institute of Technology, Changzhou, 213032, People's Republic of China
| | - Yufa Sun
- School of Petrochemical and Engineering, Changzhou University, Changzhou, 213164, People's Republic of China
| | - Wenchang Wang
- School of Petrochemical and Engineering, Changzhou University, Changzhou, 213164, People's Republic of China
| | - Zhidong Chen
- School of Petrochemical and Engineering, Changzhou University, Changzhou, 213164, People's Republic of China.
| | - Zhiyao Ming
- Jiangsu Mingfeng Electronic Material Technology Co., Ltd., Changzhou, 213341, People's Republic of China
| |
Collapse
|
5
|
Bu L, Song Q, Jiang D, Shan X, Wang W, Chen Z. A novel molecularly imprinting polypyrrole electrochemiluminescence sensor based on MIL-101-g-C 3N 4 for supersensitive determination of ciprofloxacin. Mikrochim Acta 2023; 190:373. [PMID: 37648847 DOI: 10.1007/s00604-023-05956-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2023] [Accepted: 08/13/2023] [Indexed: 09/01/2023]
Abstract
Ciprofloxacin (CIP), a quinolone antibiotic, was rapidly and sensitively detected by integrating the molecularly imprinted polymer (MIP) with an ultra-sensitive electrochemiluminescence (ECL) method. g-C3N4, a typical polymer semiconductor, exhibited outstanding ECL efficiency and excellent ECL stability after combining with an iron-based metal-organic framework (MIL-101). Subsequently, the molecularly imprinted polypyrrole was electropolymerized on the composites of MIL-101-g-C3N4 modified glassy carbon electrode (GCE). The specific sites that could target rebinding the CIP molecules were formed on the surface of MIP after extracting the CIP templates. The determination of specific concentrations of CIP could be realized according to the difference in ECL intensity (△ECL) between the eluting and rebinding of the CIP. Under optimal conditions, a good linear response of △ECL and the logarithm of CIP concentrations was obtained in the range 1.0 × 10-9 ~ 1.0 × 10-5 mol/L, with a detection limit of 4.5 × 10-10 mol/L (S/N = 3) (the working potential was -1.8 ~ 0 V). The RSD of all points in the calibration plot was less than 5.0% and the real samples recovery was between 98.0 and 104%. This paper displays satisfactory selectivity and sensitivity, providing a rapid, convenient, and cheap method for the determination of CIP in real samples.
Collapse
Affiliation(s)
- Liyin Bu
- School of Petrochemical Engineering, Changzhou University, ChangzhouJiangsu, 213164, China
| | - Qingyuan Song
- School of Petrochemical Engineering, Changzhou University, ChangzhouJiangsu, 213164, China
| | - Ding Jiang
- School of Petrochemical Engineering, Changzhou University, ChangzhouJiangsu, 213164, China
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou, 213164, Jiangsu, China
- Advanced Catalysis and Green Manufacturing Collaborative Innovation Center, Changzhou University, Changzhou, 213164, Jiangsu, China
| | - Xueling Shan
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou, 213164, Jiangsu, China
- Advanced Catalysis and Green Manufacturing Collaborative Innovation Center, Changzhou University, Changzhou, 213164, Jiangsu, China
| | - Wenchang Wang
- Analysis and Testing Center, NERC Biomass of Changzhou University, Changzhou, 213164, Jiangsu, China
| | - Zhidong Chen
- School of Petrochemical Engineering, Changzhou University, ChangzhouJiangsu, 213164, China.
| |
Collapse
|
6
|
Zhang K, Wang Y, Zhang Y. Fabrication of molecular imprinting electrochemical sensor for determination of 2-O-(β-d-glucopyranosyl) ascorbic acid. INT J ELECTROCHEM SC 2023. [DOI: 10.1016/j.ijoes.2023.01.019] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/12/2023]
|
7
|
Zanoni C, Spina S, Magnaghi LR, Guembe-Garcia M, Biesuz R, Alberti G. Potentiometric MIP-Modified Screen-Printed Cell for Phenoxy Herbicides Detection. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2022; 19:16488. [PMID: 36554364 PMCID: PMC9779394 DOI: 10.3390/ijerph192416488] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 11/30/2022] [Accepted: 12/07/2022] [Indexed: 06/17/2023]
Abstract
In this study, a molecularly imprinted polymer (MIP)-based screen-printed cell is developed for detecting phenoxy herbicides using 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the template. MCPA is a phenoxy herbicide widely used since 1945 to control broadleaf weeds via growth regulation, primarily in pasture and cereal crops. The potentiometric cell consists of a silver/silver chloride pseudo-reference electrode and a graphite working electrode coated with a MIP film. The polymeric layer is thermally formed after drop-coating of a pre-polymeric mixture composed of the reagents at the following molar ratio: 1 MCPA: 15 MAA (methacrylic acid): 7 EGDMA (ethylene glycol dimethacrylate). After template removal, the recognition cavities function as the ionophore of a classical ion selective electrode (ISE) membrane. The detected ion is the deprotonated MCPA specie, negatively charged, so the measurements were performed in phosphate buffer at pH 5.5. A linear decrease of the potential with MCPA concentration, ranging from 4 × 10-8 to 1 × 10-6 mol L-1, was obtained. The detection limit and the limit of quantification were, respectively, 10 nmol L-1 and 40 nmol L-1. A Nernstian slope of about -59 mV/dec was achieved. The method has precision and LOD required for MCPA determination in contaminated environmental samples.
Collapse
Affiliation(s)
- Camilla Zanoni
- Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
| | - Stefano Spina
- Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
| | - Lisa Rita Magnaghi
- Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
- Unità di Ricerca di Pavia, INSTM, Via G. Giusti 9, 50121 Firenze, Italy
| | - Marta Guembe-Garcia
- Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
- Departamento de Química, Facultad de Ciencias, Universidad de Burgos, Plaza de Misael Bañuelos s/n, 09001 Burgos, Spain
| | - Raffaela Biesuz
- Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
- Unità di Ricerca di Pavia, INSTM, Via G. Giusti 9, 50121 Firenze, Italy
| | - Giancarla Alberti
- Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
| |
Collapse
|
8
|
Song Q, Shan X, Bu L, Dai A, Jiang D, Wang W, Shiigi H, Chen Z. An electrochemiluminescence resonance energy aptasensor based on Ag3PO4-UiO-66 for ultrasensitive detection of diethylstilbestrol. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116987] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
9
|
Bouabdallaoui M, Aouzal Z, Ben Jadi S, Bazzaoui M, Wang R, Bazzaoui EA. Low potential electropolymerization and copolymerization of diphenylamine on aluminium. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141016] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
10
|
Ayankojo AG, Reut J, Nguyen VBC, Boroznjak R, Syritski V. Advances in Detection of Antibiotic Pollutants in Aqueous Media Using Molecular Imprinting Technique-A Review. BIOSENSORS 2022; 12:bios12070441. [PMID: 35884244 PMCID: PMC9312920 DOI: 10.3390/bios12070441] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/13/2022] [Revised: 06/16/2022] [Accepted: 06/21/2022] [Indexed: 05/08/2023]
Abstract
Antibiotics constitute one of the emerging categories of persistent organic pollutants, characterised by their expansion of resistant pathogens. Antibiotic pollutants create a major public health challenge, with already identifiable detrimental effects on human and animal health. A fundamental aspect of controlling and preventing the spread of pollutants is the continuous screening and monitoring of environmental samples. Molecular imprinting is a state-of-the-art technique for designing robust biomimetic receptors called molecularly imprinted polymers (MIPs), which mimic natural biomolecules in target-selective recognition. When integrated with an appropriate sensor transducer, MIP demonstrates a potential for the needed environmental monitoring, thus justifying the observed rise in interest in this field of research. This review examines scientific interventions within the last decade on the determination of antibiotic water pollutants using MIP receptors interfaced with label-free sensing platforms, with an expanded focus on optical, piezoelectric, and electrochemical systems. Following these, the review evaluates the analytical performance of outstanding MIP-based sensors for environmentally significant antibiotics, while highlighting the importance of computational chemistry in functional monomer selection and the strategies for signal amplification and performance improvement. Lastly, the review points out the future trends in antibiotic MIP research, as it transits from a proof of concept to the much demanded commercially available entity.
Collapse
|
11
|
David IG, Buleandra M, Popa DE, Cheregi MC, Iorgulescu EE. Past and Present of Electrochemical Sensors and Methods for Amphenicol Antibiotic Analysis. MICROMACHINES 2022; 13:mi13050677. [PMID: 35630144 PMCID: PMC9143398 DOI: 10.3390/mi13050677] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/18/2022] [Revised: 04/12/2022] [Accepted: 04/24/2022] [Indexed: 12/30/2022]
Abstract
Amphenicols are broad-spectrum antibiotics. Despite their benefits, they also present toxic effects and therefore their presence in animal-derived food was regulated. Various analytical methods have been reported for their trace analysis in food and environmental samples, as well as in the quality control of pharmaceuticals. Among these methods, the electrochemical ones are simpler, more rapid and cost-effective. The working electrode is the core of any electroanalytical method because the selectivity and sensitivity of the determination depend on its surface activity. Therefore, this review offers a comprehensive overview of the electrochemical sensors and methods along with their performance characteristics for chloramphenicol, thiamphenicol and florfenicol detection, with a focus on those reported in the last five years. Electrode modification procedures and analytical applications of the recently described devices for amphenicol electroanalysis in various matrices (pharmaceuticals, environmental, foods), together with the sample preparation methods were discussed. Therefore, the information and the concepts contained in this review can be a starting point for future new findings in the field of amphenicol electrochemical detection.
Collapse
|