Elaboration of an electroporation protocol for Bacillus cereus ATCC 14579

Genetic basis of clarithromycin resistance in Bacillus anthracis

The high-consequence pathogen Bacillus anthracis causes human anthrax and often results in lethal infections without the rapid administration of effective antimicrobial treatment. Antimicrobial resistance profiling is therefore critical to inform post-exposure prophylaxis and treatment decisions, especially during emergencies such as outbreaks or where intentional release is suspected. Whole-genome sequencing using a rapid long-read sequencer can uncover antimicrobial resistance patterns if genetic markers of resistance are known. To identify genomic markers associated with antimicrobial resistance, we isolated B. anthracis derived from the avirulent Sterne strain with elevated minimal inhibitory concentrations to clarithromycin. Mutants were characterized both phenotypically through broth microdilution susceptibility testing and observations during culturing, as well as genotypically with whole-genome sequencing. We identified two different in-frame insertions in the L22 ribosomal protein-encoding gene rplV, which were subsequently confirmed to be involved in clarithromycin resistance through the reversion of the mutant gene to the parent (drug-susceptible) sequence. Detection of the rplV insertions was possible with rapid long-read sequencing, with a time-to-answer within 3 h. The mutations associated with clarithromycin resistance described here will be used in conjunction with known genetic markers of resistance for other antimicrobials to strengthen the prediction of antimicrobial resistance in B. anthracis.IMPORTANCEThe disease anthrax, caused by the pathogen Bacillus anthracis, is extremely deadly if not treated quickly and appropriately. Clarithromycin is an antibiotic recommended for the treatment and post-exposure prophylaxis of anthrax by the Centers for Disease Control and Prevention; however, little is known about the ability of B. anthracis to develop resistance to clarithromycin or the mechanism of that resistance. The characterization of clarithromycin-resistant isolates presented here provides valuable information for researchers and clinicians in the event of a release of the resistant strain. Additionally, knowledge of the genetic basis of resistance provides a foundation for susceptibility prediction through rapid genome sequencing to inform timely treatment decisions.

Optimisation of DNA electroporation protocols for different plant-associated bacteria

Electroporation is a vital process that facilitates the use of modern recombineering and other high-throughput techniques in a wide array of microorganisms, including non-model bacteria like plant growth-promoting bacteria (PGPB). These microorganisms play a significant role in plant health by colonizing plants and promoting growth through nutrient exchange and hormonal regulation. In this study, we introduce a sequential Design of Experiments (DOE) approach to obtain highly competent cells swiftly and reliably for electroporation. Our method focuses on optimizing the three stages of the electroporation procedure-preparing competent cells, applying the electric pulse field, and recovering transformed cells-separately. We utilized a split-plot fractional design with five factors and a covariate to optimize the first step, response surface methodology (RSM) for the second step, and Plackett-Burman design for two categorical factors and one continuous factor for the final step. Following the experimental sequence with three bacterial models, we achieved efficiencies 10 to 100 times higher, reaching orders of 105 to 106 CFU/μg of circular plasmid DNA. These results highlight the significant potential for enhancing electroporation protocols for non-model bacteria.

Efficient Electrotransformation of Bacillus thuringiensis for Gene Manipulation and Expression

Genetic manipulation of Bacillus spp., such as B. thuringiensis and B. cereus, is laborious and time consuming due to challenges in transformation of the plasmid DNA construct. Larger shuttle plasmids, such as pMAD, that are commonly used in markerless gene replacement are particularly difficult to transform into Bacillus spp. Here, we present robust protocols that work efficiently for the transformation of both small and large plasmid constructs into B. thuringiensis. Our protocols involve preparation of efficient electrocompetent Bacillus cells by cultivating the cells in the presence of a cell wall-weakening agent, followed by washing the cells with optimized solutions. The protocols further highlight the importance of using unmethylated plasmid DNA for the efficient transformation of B. thuringiensis. © 2022 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Preparation of electrocompetent B. thuringiensis Basic Protocol 2: Transformation of B. thuringiensis.

Barriers to genetic manipulation of Enterococci: Current Approaches and Future Directions

Enterococcus faecalis and Enterococcus faecium are Gram-positive commensal gut bacteria that can also cause fatal infections. To study clinically relevant multi-drug resistant E. faecalis and E. faecium strains, methods are needed to overcome physical (thick cell wall) and enzymatic barriers that limit the transfer of foreign DNA and thus prevent facile genetic manipulation. Enzymatic barriers to DNA uptake identified in E. faecalis and E. faecium include type I, II and IV restriction modification systems and CRISPR-Cas. This review examines E. faecalis and E. faecium DNA defence systems and the methods with potential to overcome these barriers. DNA defence system bypass will allow the application of innovative genetic techniques to expedite molecular-level understanding of these important, but somewhat neglected, pathogens.

Efficient Genome Editing by a Miniature CRISPR-AsCas12f1 Nuclease in Bacillus anthracis

A miniature CRISPR-Cas12f has been demonstrated to serve as an effective genome editing tool in gram negative bacteria as well as human cells. Here, we developed an alternative method to edit the genome of Bacillus anthracis based on the AsCas12f1 nuclease from Acidibacillus sulfuroxidans. When the htrA gene on the chromosome and the lef gene on the plasmid pXO1 were selected as targets, the CRISPR-AsCas12f1 system showed very high efficiency (100%). At the same time, a high efficiency was observed for large-fragment deletion. Our results also indicated that the length of the homologous arms of the donor DNA had a close relationship with the editing efficiency. Furthermore, a two-plasmid CRISPR-AsCas12f1 system was also constructed and combined with the endonuclease I-SceI for potential multi-gene modification. This represents a novel tool for mutant strain construction and gene function analyses in B. anthracis and other Bacillus cereus group bacteria.

New Insights into the Potential Cytotoxic Role of Bacillus cytotoxicus Cytotoxin K-1

The thermotolerant representative of the Bacillus cereus group, Bacillus cytotoxicus, reliably harbors the coding gene of cytotoxin K-1 (CytK-1). This protein is a highly cytotoxic variant of CytK toxin, initially recovered from a diarrheal foodborne outbreak that caused the death of three people. In recent years, the cytotoxicity of B. cytotoxicus has become controversial, with some strains displaying a high cytotoxicity while others show no cytotoxicity towards cell lines. In order to better circumscribe the potential pathogenic role of CytK-1, knockout (KO) mutants were constructed in two B. cytotoxicus strains, E8.1 and E28.3. The complementation of the cytK-1 KO mutation was implemented in a mutant strain lacking in the cytK-1 gene. Using the tetrazolium salt (MTT) method, cytotoxicity tests of the cytK-1 KO and complemented mutants, as well as those of their wild-type strains, were carried out on Caco-2 cells. The results showed that cytK-1 KO mutants were significantly less cytotoxic than the parental wild-type strains. However, the complemented mutant was as cytotoxic as the wild-type, suggesting that CytK-1 is the major cytotoxicity factor in B. cytotoxicus.

Genome editing by miniature CRISPR/Cas12f1 enzyme in Escherichia coli

The clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated (Cas) system is a valuable genome editing tool for microorganisms. However, the commonly used Cas9 nuclease derived from Streptococcus pyogenes (SpCas9) is not applicable to many industrially relevant bacteria, due to its cytotoxicity and large size (1368 amino acids [aa]). We developed an alternative genome editing system using a miniature Cas12f1 nuclease (529 aa) derived from an uncultured archaeon, Un1Cas12f1. When editing four dispensable genes in Escherichia coli MG1655 and BW25113, the CRISPR/Un1Cas12f1 system showed higher efficiency (63%-100%) than the CRISPR/SpCas9 system (50%-79%). The CRISPR/Un1Cas12f1 genome editing system is expected to be applied to the genome editing of a wide variety of bacteria.

Cyclodextrinase from Thermococcus sp expressed in Bacillus subtilis and its application in the preparation of maltoheptaose

Background

Maltoheptaose as malto-oligosaccharides with specific degree of polymerization, has wide applications in food, medicine and cosmetics industries. Currently, cyclodextrinase have been applied as prepared enzyme to prepare maltoheptaose. However, the yield and proportion of maltoheptaose was lower, which is due to limited substrate and product specificity of cyclodextrinase (CDase). To achieve higher maltoheptaose yield, cyclodextrinase with high substrate and product specificity should be obtained.

Results

In this study, cyclodextrinase derived from Thermococcus sp B1001 (TsCDase) was successfully expressed and characterized in Bacillus subtilis for the first time. The specific activity of TsCDase was 637.95 U/mg under optimal conditions of 90 °C and pH 5.5, which exhibited high substrate specificity for cyclodextrins (CDs). When the concentration of β-CD was 8%, the yield of maltoheptaose achieved by TsCDase was 82.33% across all reaction products, which exceeded the yields of maltoheptaose in other recent reports. Among malto-oligosaccharides generated as reaction products, maltoheptaose was present in the highest proportion, about 94.55%.

Conclusions

This study provides high substrate and product specificity of TsCDase. TsCDase is able to prepare higher yield of maltoheptaose through conversion of β-CD in the food industry.

Visualization of Germination Proteins in Putative Bacillus cereus Germinosomes

Bacillus cereus can survive in the form of spores for prolonged periods posing a serious problem for the manufacture of safe shelf-stable foods of optimal quality. Our study aims at increasing knowledge of B. cereus spores focusing primarily on germination mechanisms to develop novel milder food preservation strategies. Major features of B. cereus spores are a core with the genetic material encased by multiple protective layers, an important one being the spores′ inner membrane (IM), the location of many important germination proteins. To study mechanisms involved in germination of B. cereus spores, we have examined the organization of germinant receptors (GRs) in spores′ IM. Previous studies have indicated that in spores of B.cereus ATCC 14579 the L-alanine responsive GR, GerR, plays a major role in the germination process. In our study, the location of the GerR GR subunit, GerRB, in spores was examined as a C-terminal SGFP2 fusion protein expressed under the control of the gerR operon′s promoter. Our results showed that: (i) the fluorescence maxima and integrated intensity in spores with plasmid-borne expression of GerRB-SGFP2 were significantly higher than in wild-type spores; (ii) western blot analysis confirmed the expression of the GerRB-SGFP2 fusion protein in spores; and (iii) fluorescence microscopy visualized GerRB-SGFP2 specific bright foci in ~30% of individual dormant spores if only GerRB-SGFP2 was expressed, but, noticeably, in ~85% of spores upon co-expression with GerRA and GerRC. Our data corroborates the notion that co-expression of GR subunits improves their stability. Finally, all spores displayed bright fluorescent foci upon expression of GerD-mScarlet-I under the control of the gerD promoter. We termed all fluorescent foci observed germinosomes, the term used for the IM foci of GRs in Bacillus subtilis spores. Our data are the first evidence for the existence of germinosomes in B. cereus spores.

The ptsG Gene Encoding the Major Glucose Transporter of Bacillus cereus C1L Participates in Root Colonization and Beneficial Metabolite Production to Induce Plant Systemic Disease Resistance

Rhizosphere interactions between microorganisms and plants have great influence on plant health. Bacillus cereus C1L, an induced systemic resistance (ISR)-eliciting rhizobacterium from Lilium formosanum, can protect monocot and dicot plants from disease challenges. To identify the ISR-involved bacterial genes, the systemic protection effect of transposon-tagged mutants of B. cereus C1L against southern corn leaf blight (SCLB) was surveyed, and a mutant of the ptsG gene encoding glucose-specific permease of the phosphotransferase system was severely impaired in the abilities of disease suppression and root colonization. The ptsG mutant lost the preferential utilization of glucose and showed reduction of glucose-assisted growth in minimal medium. A promoter-based reporter assay revealed that ptsG expression could be activated by certain sugar constituents of maize root exudates, among which B. cereus C1L exhibited the highest chemotactic response toward glucose, whereas neither of them could attract the ptsG mutant. Additionally, ptsG deficiency almost completely abolished glucose uptake of B. cereus C1L. Metabolite analysis indicated that the lack of ptsG undermined glucose-induced accumulation of acetoin and 2,3-butanediol in B. cereus C1L, both eliciting maize ISR against SCLB. Pretreatments with B. cereus C1L, ptsG mutant, acetoin, and 2,3-butanediol enhanced defense-related reactive oxygen species accumulation and callose deposition at different levels that were positively correlated to their ISR-eliciting activities. Thus, glucose uptake-mediating ptsG participates in ISR elicitation by endowing B. cereus C1L with the full capacities for root colonization and beneficial glucose metabolite production, providing a clue regarding how ISR-mediating rhizobacteria create a mutually beneficial relationship with various plant species.

Optimization and Comparison of Different Methods and Factors for Efficient Transformation of Brucella abortus RB51strain

Background:

The development of protective vaccines for Brucella spp. has been hampered by the difficulty in transformation of Brucella cells with foreign DNA for genetic manipulation. It seems that the formation of Brucella spheroplasts would increase the efficiency of transformation. The aim of this study was to devise an efficient method for the transformation of Brucella spp.

Materials and Methods:

At first, spheroplast of Brucella was prepared by glycine and ampicillin induction and transformed using optimized protocols of CaCl₂, electroporation, and lipofection methods. Then, the efficacy of transformation was compared between the three-mentioned methods.

Results:

Ampicillin-induced spheroplasts from early-log phase culture of brucella when incubated in a medium-containing 0.2 M sucrose during cell recovery had higher transformation efficiency in three different methods. Comparison of the transformation efficiency of Brucella abortus RB51 using the CaCl₂, lipofection, and electroporation methods revealed that the transformation efficiency with the lipofection method was significantly higher than with other two methods (P < 0.05).

Conclusions:

Lipofection method by lipofectamine 2000 on ampicillin-induced spheroplasts can be a suitable approach for Brucella transformation.

Production of R,R-2,3-butanediol of ultra-high optical purity from Paenibacillus polymyxa ZJ-9 using homologous recombination

The present study describes the use of metabolic engineering to achieve the production of R,R-2,3-butanediol (R,R-2,3-BD) of ultra-high optical purity (>99.99%). To this end, the diacetyl reductase (DAR) gene (dud A) of Paenibacillus polymyxa ZJ-9 was knocked out via homologous recombination between the genome and the previously constructed targeting vector pRN5101-L'C in a process based on homologous single-crossover. PCR verification confirmed the successful isolation of the dud A gene disruption mutant P. polymyxa ZJ-9-△dud A. Moreover, fermentation results indicated that the optical purity of R,R-2,3-BD increased from about 98% to over 99.99%, with a titer of 21.62 g/L in Erlenmeyer flasks. The latter was further increased to 25.88 g/L by fed-batch fermentation in a 5-L bioreactor.

Genome-Wide Investigation of Biofilm Formation in Bacillus cereus

Bacillus cereus is a soil-dwelling Gram-positive bacterium capable of forming structured multicellular communities, or biofilms. However, the regulatory pathways controlling biofilm formation are less well understood in B. cereus In this work, we developed a method to study B. cereus biofilms formed at the air-liquid interface. We applied two genome-wide approaches, random transposon insertion mutagenesis to identify genes that are potentially important for biofilm formation, and transcriptome analyses by RNA sequencing (RNA-seq) to characterize genes that are differentially expressed in B. cereus when cells were grown in a biofilm-inducing medium. For the first approach, we identified 23 genes whose disruption by transposon insertion led to altered biofilm phenotypes. Based on the predicted function, they included genes involved in processes such as nucleotide biosynthesis, iron salvage, and antibiotic production, as well as genes encoding an ATP-dependent protease and transcription regulators. Transcriptome analyses identified about 500 genes that were differentially expressed in cells grown under biofilm-inducing conditions. One particular set of those genes may contribute to major metabolic shifts, leading to elevated production of small volatile molecules. Selected volatile molecules were shown to stimulate robust biofilm formation in B. cereus Our studies represent a genome-wide investigation of B. cereus biofilm formation.IMPORTANCE In this work, we established a robust method for B. cereus biofilm studies and applied two genome-wide approaches, transposon insertion mutagenesis and transcriptome analyses by RNA-seq, to identify genes and pathways that are potentially important for biofilm formation in B. cereus We discovered dozens of genes and two major metabolic shifts that seem to be important for biofilm formation in B. cereus Our study represents a genome-wide investigation on B. cereus biofilm formation.

Endophytic Bacillus cereus Effectively Controls Meloidogyne incognita on Tomato Plants Through Rapid Rhizosphere Occupation and Repellent Action

Root-knot nematodes (Meloidogyne spp.), which cause severe global agricultural losses, can establish a special niche in the root vascular cylinder of crops, making them difficult to control. Endophytic bacteria have great potential as biocontrol organisms against Meloidogyne incognita. Three endophytic bacteria were isolated from plant tissues and showed high nematicidal activity against M. incognita second-stage juveniles (J2) in vitro. The gyrB gene sequence amplification results indicated that the three isolates were Bacillus cereus BCM2, B. cereus SZ5, and B. altitudinis CCM7. The isolates colonized tomato roots rapidly and stably during the colonization dynamic experiment. Three pot experiments were designed to determine the potential of three endophytic bacterial isolates on control of root-knot nematodes. The results showed that the preinoculated B. cereus BCM2 experiment significantly reduced gall and egg mass indexes. The inhibition ratio of gall and egg mass was up to 81.2 and 75.6% on tomato roots and significantly enhanced shoot length and fresh weight. The other two experiments with inoculated endophytic bacteria and M. incognita at the same time or after morbidity had lower inhibition ratios compared with the preinoculated endophytic bacteria experiment. The confocal laser-scanning microscopy method was used to further study the possible mechanism of endophytic bacteria in the biocontrol process. The results showed the localization pattern of the endophytic bacteria B. cereus BCM2-(str')-pBCgfp-1 in tomato root tissues. Root tissue colonized by endophytic bacteria repelled M. incognita J2 infection compared with the untreated control in a repellence experiment. We isolated an endophytic B. cereus strain that stably colonized tomato and controlled M. incognita effectively. This strain has potential for plant growth promotion, successful ecological niche occupation, and M. incognita J2 repellent action induction. It plays an important role in endophytic bacteria against root-knot nematodes.

How to transform a recalcitrant Paenibacillus strain: From culture medium to restriction barrier

Paenibacillus riograndensis SBR5^T is a plant growth-promoting bacterium isolated from the wheat rhizosphere. Its recalcitrance to genetic manipulation is a major bottleneck for molecular studies, as has been reported for other Paenibacillus environmental isolates. An efficient electroporation protocol was established by evaluating diverse parameters and optimizing the culture medium, culture growth phase, electroporation solution, recovery medium, DNA input, and electric field strength. Efficiencies of approximately 2.8×10⁴transformantsμg^-1 of plasmid DNA were obtained. The optimized protocol was tested with other Paenibacillus species, and the relevance of bypassing the restriction DNA defense system to transform Paenibacillus was highlighted. This protocol is the tool needed to deepen molecular studies with this strain and will aid in the manipulation of other new environmental isolates that also exhibit recalcitrant transformation difficulties.

pheS * , an effective host-genotype-independent counter-selectable marker for marker-free chromosome deletion in Bacillus amyloliquefaciens

Aside from applications in the production of commercial enzymes and metabolites, Bacillus amyloliquefaciens is also an important group of plant growth-promoting rhizobacteria that supports plant growth and suppresses phytopathogens. A host-genotype-independent counter-selectable marker would enable rapid genetic manipulation and metabolic engineering, accelerating the study of B. amyloliquefaciens and its development as both a microbial cell factory and plant growth-promoting rhizobacteria. Here, a host-genotype-independent counter-selectable marker pheS ^* was constructed through a point mutation of the gene pheS, which encodes the α-subunit of phenylalanyl-tRNA synthetase in Bacillus subtilis strain 168. In the presence of 5 mM p-chloro-phenylalanine, 100 % of B. amyloliquefaciens strain SQR9 cells carrying pheS ^* were killed, whereas the wild-type strain SQR9 showed resistance to p-chloro-phenylalanine. A simple pheS ^* and overlap-PCR-based strategy was developed to create the marker-free deletion of the amyE gene as well as a 37-kb bmy cluster in B. amyloliquefaciens SQR9. The effectiveness of pheS ^* as a counter-selectable marker in B. amyloliquefaciens was further confirmed through the deletion of amyE genes in strains B. amyloliquefaciens FZB42 and NJN-6. In addition, the potential use of pheS ^* in other Bacillus species was preliminarily assessed. The expression of PheS^* in B. subtilis strain 168 and B. cereus strain ATCC 14579 caused pronounced sensitivity of both hosts to p-chloro-phenylalanine, indicating that pheS ^* could be used as a counter-selectable marker (CSM) in these strains.

Discovery of a Unique Extracellular Polysaccharide in Members of the Pathogenic Bacillus That Can Co-form with Spores

An exopolysaccharide, produced during the late stage of stationary growth phase, was discovered and purified from the culture medium of Bacillus cereus, Bacillus anthracis, and Bacillus thuringiensis when strains were grown in a defined nutrient medium that induces biofilm. Two-dimensional NMR structural characterization of the polysaccharide, named pzX, revealed that it is composed of an unusual three amino-sugar sequence repeat of [-3)XylNAc4OAc(α1-3)GlcNAcA4OAc(α1-3)XylNAc(α1-]n The sugar residue XylNAc had never been described previously in any glycan structure. The XNAC operon that contains the genes for the assembly of pzX is also unique and so far has been identified only in members of the Bacillus cereus sensu lato group. Microscopic and biochemical analyses indicate that pzX co-forms during sporulation, so that upon the release of the spore to the extracellular milieu it becomes surrounded by pzX. The relative amounts of pzX produced can be manipulated by specific nutrients in the medium, but rich medium appears to suppress pzX formation. pzX has the following unique characteristics: a surfactant property that lowers surface tension, a cell/spore antiaggregant, and an adherence property that increases spores binding to surfaces. pzX in Bacillus could represent a trait shared by many spore-producing microorganisms. It suggests pzX is an active player in spore physiology and may provide new insights to the successful survival of the B. cereus species in natural environments or in the hosts.

Mob/oriT, a mobilizable site-specific recombination system for unmarked genetic manipulation in Bacillus thuringiensis and Bacillus cereus

Background

Bacillus thuringiensis and Bacillus cereus are two important species in B. cereus group. The intensive study of these strains at the molecular level and construction of genetically modified bacteria requires the development of efficient genetic tools. To insert genes into or delete genes from bacterial chromosomes, marker-less manipulation methods were employed.

Results

We present a novel genetic manipulation method for B. thuringiensis and B. cereus strains that does not leave selection markers. Our approach takes advantage of the relaxase Mob02281 encoded by plasmid pBMB0228 from Bacillus thuringiensis. In addition to its mobilization function, this Mob protein can mediate recombination between oriT sites. The Mob02281 mobilization module was associated with a spectinomycin-resistance gene to form a Mob-Spc cassette, which was flanked by the core 24-bp oriT sequences from pBMB0228. A strain in which the wild-type chromosome was replaced with the modified copy containing the Mob-Spc cassette at the target locus was obtained via homologous recombination. Thus, the spectinomycin-resistance gene can be used to screen for Mob-Spc cassette integration mutants. Recombination between the two oriT sequences mediated by Mob02281, encoded by the Mob-Spc cassette, resulted in the excision of the Mob-Spc cassette, producing the desired chromosomal alteration without introducing unwanted selection markers. We used this system to generate an in-frame deletion of a target gene in B. thuringiensis as well as a gene located in an operon of B. cereus. Moreover, we demonstrated that this system can be used to introduce a single gene or an expression cassette of interest in B. thuringiensis.

Conclusion

The Mob/oriT recombination system provides an efficient method for unmarked genetic manipulation and for constructing genetically modified bacteria of B. thuringiensis and B. cereus. Our method extends the available genetic tools for B. thuringiensis and B. cereus strains.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0492-9) contains supplementary material, which is available to authorized users.

Plasmid Rolling-Circle Replication

Plasmids are DNA entities that undergo controlled replication independent of the chromosomal DNA, a crucial step that guarantees the prevalence of the plasmid in its host. DNA replication has to cope with the incapacity of the DNA polymerases to start de novo DNA synthesis, and different replication mechanisms offer diverse solutions to this problem. Rolling-circle replication (RCR) is a mechanism adopted by certain plasmids, among other genetic elements, that represents one of the simplest initiation strategies, that is, the nicking by a replication initiator protein on one parental strand to generate the primer for leading-strand initiation and a single priming site for lagging-strand synthesis. All RCR plasmid genomes consist of a number of basic elements: leading strand initiation and control, lagging strand origin, phenotypic determinants, and mobilization, generally in that order of frequency. RCR has been mainly characterized in Gram-positive bacterial plasmids, although it has also been described in Gram-negative bacterial or archaeal plasmids. Here we aim to provide an overview of the RCR plasmids' lifestyle, with emphasis on their characteristic traits, promiscuity, stability, utility as vectors, etc. While RCR is one of the best-characterized plasmid replication mechanisms, there are still many questions left unanswered, which will be pointed out along the way in this review.

The C-Terminal Zwitterionic Sequence of CotB1 Is Essential for Biosilicification of the Bacillus cereus Spore Coat

Silica is deposited in and around the spore coat layer of Bacillus cereus, and enhances the spore's acid resistance. Several peptides and proteins, including diatom silaffin and silacidin peptides, are involved in eukaryotic silica biomineralization (biosilicification). Homologous sequence search revealed a silacidin-like sequence in the C-terminal region of CotB1, a spore coat protein of B. cereus. The negatively charged silacidin-like sequence is followed by a positively charged arginine-rich sequence of 14 amino acids, which is remarkably similar to the silaffins. These sequences impart a zwitterionic character to the C terminus of CotB1. Interestingly, the cotB1 gene appears to form a bicistronic operon with its paralog, cotB2, the product of which, however, lacks the C-terminal zwitterionic sequence. A ΔcotB1B2 mutant strain grew as fast and formed spores at the same rate as wild-type bacteria but did not show biosilicification. Complementation analysis showed that CotB1, but neither CotB2 nor C-terminally truncated mutants of CotB1, could restore the biosilicification activity in the ΔcotB1B2 mutant, suggesting that the C-terminal zwitterionic sequence of CotB1 is essential for the process. We found that the kinetics of CotB1 expression, as well as its localization, correlated well with the time course of biosilicification and the location of the deposited silica. To our knowledge, this is the first report of a protein directly involved in prokaryotic biosilicification.

IMPORTANCE

Biosilicification is the process by which organisms incorporate soluble silicate in the form of insoluble silica. Although the mechanisms underlying eukaryotic biosilicification have been intensively investigated, prokaryotic biosilicification was not studied until recently. We previously demonstrated that biosilicification occurs in Bacillus cereus and its close relatives, and that silica is deposited in and around a spore coat layer as a protective coating against acid. The present study reveals that a B. cereus spore coat protein, CotB1, which carried a C-terminal zwitterionic sequence, is essential for biosilicification. Our results provide the first insight into mechanisms required for biosilicification in prokaryotes.

Highly efficient transformation of Stenotrophomonas maltophilia S21, an environmental isolate from soil, by electroporation

Stenotrophomonas maltophilia is an emerging opportunistic pathogen, which also exhibits potential of wide applications in industry, environment and agriculture. An efficient transformation method for S. maltophilia would be convenient to its genetic studies. In this report, we focused on developing an efficient transformation protocol for S. maltophilia. Gene transfer by three different methods (chemical transformation, conjugation and electroporation) indicated that electroporation was the most efficient method to transform S. maltophilia S21. Then, the entire electroporation process from competent-cell preparation to post-pulse incubation was optimized to get higher efficiencies. Utilizing competent cells prepared at optical density (600 nm) of 1.0, the maximal transformation efficiency of S. maltophilia S21 reached 1.53 × 10(8) transformants/μg of pBBR1MCS DNA at a field strength of 18 kV/cm, a time constant of 4.8 ms (200 Ω), a DNA amount of 100 ng and a cell concentration of 2.4 × 10(8) CFU/ml after 3 h incubation. Moreover, we successfully transformed the other four isolates of S. maltophilia using this protocol. To date, this is the first report about electroporation of S. maltophilia and it will facilitate the further study of this species.

Development of an efficient electroporation method for iturin A-producing Bacillus subtilis ZK

In order to efficiently introduce DNA into B. subtilis ZK, which produces iturin A at a high level, we optimized seven electroporation conditions and explored an efficient electroporation method. Using the optimal conditions, the electroporation efficiency was improved to 1.03 × 10⁷ transformants/μg of DNA, an approximately 10,000-fold increase in electroporation efficiency. This efficiency is the highest electroporation efficiency for B. subtilis and enables the construction of a directed evolution library or the knockout of a gene in B. subtilis ZK for molecular genetics studies. In the optimization process, the combined effects of three types of wall-weakening agents were evaluated using a response surface methodology (RSM) design, which led to a two orders of magnitude increase in electroporation efficiency. To the best of our limited knowledge, this study provides the first demonstration of using an RSM design for optimization of the electroporation conditions for B. subtilis. To validate the electroporation efficiency, a case study was performed and a gene (rapC) was inactivated in B. subtilis ZK using a suicide plasmid pMUTIN4. Moreover, we found that the rapC mutants exhibited a marked decrease in iturin A production, suggesting that the rapC gene was closely related to the iturin A production.

Optimization of a plasmid electroporation protocol for Aeromonas salmonicida subsp. salmonicida

Aeromonas salmonicida subsp. salmonicida is a major fish pathogen. Molecular tools are required to study the virulence and genomic stability of this bacterium. An efficient electroporation-mediated transformation protocol for A. salmonicida subsp. salmonicida would make genetic studies faster and easier. In the present study, we designed the 4.1-kb pSDD1 plasmid as a tool for optimizing an electroporation protocol for A. salmonicida subsp. salmonicida. We systematically tested the electroporation conditions to develop a protocol that generates the maximum number of transformants. Under these optimal conditions (25 kV/cm, 200 Ω, 25 μF), we achieved an electroporation efficiency of up to 1×10(5) CFU/μg DNA. The electroporation protocol was also tested using another plasmid of 10.6-kb and three different strains of A. salmonicida subsp. salmonicida. The strains displayed significant differences in their electro-transformation competencies. Strain 01-B526 was the easiest to electroporate, especially with the pSDD1 plasmid. This plasmid was stably maintained in the 01-B526 transformants, as were the native plasmids, but could be easily cured by removing the selection conditions. This is the first efficient electroporation protocol reported for A. salmonicida subsp. salmonicida, and offers new possibilities for studying this bacterium.

Development of an electrotransformation protocol for genetic manipulation of Clostridium pasteurianum

BACKGROUND

Reducing the production cost of, and increasing revenues from, industrial biofuels will greatly facilitate their proliferation and co-integration with fossil fuels. The cost of feedstock is the largest cost in most fermentation bioprocesses and therefore represents an important target for cost reduction. Meanwhile, the biorefinery concept advocates revenue growth through complete utilization of by-products generated during biofuel production. Taken together, the production of biofuels from low-cost crude glycerol, available in oversupply as a by-product of bioethanol production, in the form of thin stillage, and biodiesel production, embodies a remarkable opportunity to advance affordable biofuel development. However, few bacterial species possess the natural capacity to convert glycerol as a sole source of carbon and energy into value-added bioproducts. Of particular interest is the anaerobe Clostridium pasteurianum, the only microorganism known to convert glycerol alone directly into butanol, which currently holds immense promise as a high-energy biofuel and bulk chemical. Unfortunately, genetic and metabolic engineering of C. pasteurianum has been fundamentally impeded due to lack of an efficient method for deoxyribonucleic acid (DNA) transfer.

RESULTS

This work reports the development of an electrotransformation protocol permitting high-level DNA transfer to C. pasteurianum ATCC 6013 together with accompanying selection markers and vector components. The CpaAI restriction-modification system was found to be a major barrier to DNA delivery into C. pasteurianum which we overcame by in vivo methylation of the recognition site (5'-CGCG-3') using the M.FnuDII methyltransferase. With proper selection of the replication origin and antibiotic-resistance marker, we initially electroporated methylated DNA into C. pasteurianum at a low efficiency of 2.4 × 101 transformants μg-1 DNA by utilizing conditions common to other clostridial electroporations. Systematic investigation of various parameters involved in the cell growth, washing and pulse delivery, and outgrowth phases of the electrotransformation procedure significantly elevated the electrotransformation efficiency, up to 7.5 × 104 transformants μg-1 DNA, an increase of approximately three order of magnitude. Key factors affecting the electrotransformation efficiency include cell-wall-weakening using glycine, ethanol-mediated membrane solubilization, field strength of the electric pulse, and sucrose osmoprotection.

CONCLUSIONS

C. pasteurianum ATCC 6013 can be electrotransformed at a high efficiency using appropriately methylated plasmid DNA. The electrotransformation method and tools reported here should promote extensive genetic manipulation and metabolic engineering of this biotechnologically important bacterium.

A mimicking-of-DNA-methylation-patterns pipeline for overcoming the restriction barrier of bacteria

Genetic transformation of bacteria harboring multiple Restriction-Modification (R-M) systems is often difficult using conventional methods. Here, we describe a mimicking-of-DNA-methylation-patterns (MoDMP) pipeline to address this problem in three difficult-to-transform bacterial strains. Twenty-four putative DNA methyltransferases (MTases) from these difficult-to-transform strains were cloned and expressed in an Escherichia coli strain lacking all of the known R-M systems and orphan MTases. Thirteen of these MTases exhibited DNA modification activity in Southwestern dot blot or Liquid Chromatography–Mass Spectrometry (LC–MS) assays. The active MTase genes were assembled into three operons using the Saccharomyces cerevisiae DNA assembler and were co-expressed in the E. coli strain lacking known R-M systems and orphan MTases. Thereafter, results from the dot blot and restriction enzyme digestion assays indicated that the DNA methylation patterns of the difficult-to-transform strains are mimicked in these E. coli hosts. The transformation of the Gram-positive Bacillus amyloliquefaciens TA208 and B. cereus ATCC 10987 strains with the shuttle plasmids prepared from MoDMP hosts showed increased efficiencies (up to four orders of magnitude) compared to those using the plasmids prepared from the E. coli strain lacking known R-M systems and orphan MTases or its parental strain. Additionally, the gene coding for uracil phosphoribosyltransferase (upp) was directly inactivated using non-replicative plasmids prepared from the MoDMP host in B. amyloliquefaciens TA208. Moreover, the Gram-negative chemoautotrophic Nitrobacter hamburgensis strain X14 was transformed and expressed Green Fluorescent Protein (GFP). Finally, the sequence specificities of active MTases were identified by restriction enzyme digestion, making the MoDMP system potentially useful for other strains. The effectiveness of the MoDMP pipeline in different bacterial groups suggests a universal potential. This pipeline could facilitate the functional genomics of the strains that are difficult to transform.

Approximately 95% of the genome-sequenced bacteria harbor Restriction-Modification (R-M) systems. R-M systems usually occur in pairs, i.e., DNA methyltransferases (MTases) and restriction endonucleases (REases). REases can degrade invading DNA to protect the cell from infection by phages. This protecting machinery has also become the barrier for experimental genetic manipulation, because the newly introduced DNA would be degraded by the REases of the transformed bacteria. In this study we have developed a pipeline to protect DNA by methylation from cleavage by host REases. Multiple DNA MTases were cloned from three difficult-to-transform bacterial strains and co-expressed in an E. coli strain lacking all of the known endogenous R-M systems and orphan MTases. Thus, the DNA methylation patterns of these strains have become similar to that of the difficult-to-transform strains. Ultimately, the DNA prepared from these E. coli strains can overcome the R-M barrier of the bacterial strains that are difficult to transform and achieve genetic manipulation. The effectiveness of this pipeline in different bacterial groups suggests a universal potential. This pipeline could facilitate functional genomics of bacterial strains that are difficult to transform.

Validation of the intact zwittermicin A biosynthetic gene cluster and discovery of a complementary resistance mechanism in Bacillus thuringiensis

Zwittermicin A (ZmA) is a hybrid polyketide-nonribosomal peptide produced by certain Bacillus cereus group strains. It displays broad-spectrum antimicrobial activity. Its biosynthetic pathway in B. cereus has been proposed through analysis of the nonribosomal peptide synthetase (NRPS) and polyketide synthase (PKS) modules involved in ZmA biosynthesis. In this study, we constructed a bacterial artificial chromosome (BAC) library from Bacillus thuringiensis subsp. kurstaki strain YBT-1520 genomic DNA. The presence of known genes involved in the biosynthesis of ZmA in this BAC library was investigated by PCR techniques. Nine positive clones were identified, two of which (covering an approximately 60-kb region) could confer ZmA biosynthesis ability upon B. thuringiensis BMB171 after simultaneous transfer into this host by two compatible shuttle BAC vectors. Another previously unidentified gene cluster, named zmaWXY, was found to improve the yield of ZmA and was experimentally defined to function as a ZmA resistance transporter which expels ZmA from the cells. Putative transposase genes were detected on the flanking regions of the two gene clusters (the ZmA synthetic cluster and zmaWXY), which suggests a mobile nature of these two gene clusters. The intact ZmA gene cluster was validated, and a resistance mechanism complementary to that for zmaR (the previously identified ZmA self-resistance gene) was revealed. This study also provided a straightforward strategy to isolate and identify a huge gene cluster from Bacillus.

Development of butanol-tolerant Bacillus subtilis strain GRSW2-B1 as a potential bioproduction host

As alternative microbial hosts for butanol production with organic-solvent tolerant trait are in high demands, a butanol-tolerant bacterium, Bacillus subtilis GRSW2-B1, was thus isolated. Its tolerance covered a range of organic solvents at high concentration (5%v/v), with remarkable tolerance in particular to butanol and alcohol groups. It was susceptible for butanol acclimatization, which resulted in significant tolerance improvement. It has versatility for application in a variety of fermentation process because it has superior tolerance when cells were exposed to butanol either as high-density, late-exponential grown cells (up to 5%v/v) or under growing conditions (up to 2.25%v/v). Genetic transformation procedure was optimized, yielding the highest efficiency at 5.17 × 10³ colony forming unit (μg DNA)^-1. Gene expression could be effectively driven by several promoters with different levels, where as the highest expression was observed with a xylose promoter. The constructed vector was stably maintained in the transformants, in the presence or absence of butanol stress. Adverse effect of efflux-mediated tetracycline resistance determinant (TetL) to bacterial organic-solvent tolerance property was unexpectedly observed and thus discussed. Overall results indicate that B. subtilis GRSW2-B1 has potential to be engineered and further established as a genetic host for bioproduction of butanol.

Activity and viability of polycyclic aromatic hydrocarbon-degrading Sphingomonas sp. LB126 in a DC-electrical field typical for electrobioremediation measures

There has been growing interest in employing electro‐bioremediation, a hybrid technology of bioremediation and electrokinetics for the treatment of contaminated soil. Knowledge however on the effect of weak electrokinetic conditions on the activity and viability of pollutant‐degrading microorganisms is scarce. Here we present data about the influence of direct current (DC) on the membrane integrity, adenosine triphosphate (ATP) pools, physico‐chemical cell surface properties, degradation kinetics and culturability of fluorene‐degrading Sphingomonas sp. LB126. Flow cytometry was applied to quantify the uptake of propidium iodide (PI) and the membrane potential‐related fluorescence intensities (MPRFI) of individual cells within a population. Adenosine tri‐phosphate contents and fluorene biodegradation rates of bulk cultures were determined and expressed on a per cell basis. The cells' surface hydrophobicity and electric charge were assessed by contact angle and zeta potential measurements respectively. Relative to the control, DC‐exposed cells exhibited up to 60% elevated intracellular ATP levels and yet remained unaffected on all other levels of cellular integrity and functionality tested. Our data suggest that direct current (X = 1 V cm⁻¹; J = 10.2 mA cm⁻²) as typically used for electrobioremediation measures has no negative effect on the activity of the polycyclic aromatic hydrocarbon (PAH)‐degrading soil microorganism, thereby filling a serious gap of the current knowledge of the electrobioremediation methodology.

Enhancing isoprene production by genetic modification of the 1-deoxy-d-xylulose-5-phosphate pathway in Bacillus subtilis

To enhance the production of isoprene, a volatile 5-carbon hydrocarbon, in the Gram-positive spore-forming rod-shaped bacterium Bacillus subtilis, 1-deoxy-d-xylulose-5-phosphate synthase (Dxs) and 1-deoxy-d-xylulose-5-phosphate reductoisomerase (Dxr) were overexpressed in B. subtilis DSM 10. For the strain that overexpresses Dxs, the yield of isoprene was increased 40% over that by the wild-type strain. In the Dxr overexpression strain, the level of isoprene production was unchanged. Overexpression of Dxr together with Dxs showed an isoprene production level similar to that of the Dxs overproduction strain. The effects of external factors, such as stress factors including heat (48°C), salt (0.3 M NaCl), ethanol (1%), and oxidative (0.005% H(2)O(2)) stress, on isoprene production were further examined. Heat, salt, and H(2)O(2) induced isoprene production; ethanol inhibited isoprene production. In addition, induction and repression effects are independent of SigB, which is the general stress-responsive alternative sigma factor of Gram-positive bacteria.

Optimization of electroporation conditions for Arthrobacter with plasmid PART2

A prerequisite for genetic studies of Arthrobacter is a high efficiency transformation system that allows for DNA transfer, transposon mutagenesis, and expression of specific genes. In this study, we develop a detailed electroporation method through a systematic examination of the factors involved in the entire electroporation process. Key features of this procedure, including the addition of penicillin to cells during the early log phase of growth and the presence of 0.5M sorbitol in the electroporation and recovery media, produced the greatest increases in transformation efficiency and consistency of results. The transformation rate also varied depending on the electrical parameters, DNA concentration, and recovery time period. Using optimum conditions, we generally achieved an efficiency of 6.8 × 10(7) transformants per microgram of PART2 for Arthrobacter sp. A3. This protocol was also successfully applied to other Arthrobacter species. Therefore, we conclude that the proposed method is rapid, simple and convenient, which allows a transformation trial to be accomplished in minutes.

Enhancing electro-transformation competency of recalcitrant Bacillus amyloliquefaciens by combining cell-wall weakening and cell-membrane fluidity disturbing

Bacillus amyloliquefaciens has been a major workhorse for the production of a variety of commercially important enzymes and metabolites for the past decades. Some subspecies of this bacterium are recalcitrant to exogenous DNA, and transformation with plasmid DNA is usually less efficient, thereby limiting the genetic manipulation of the recalcitrant species. In this work, a methodology based on electro-transformation has been developed, in which the cells were grown in a semicomplex hypertonic medium, cell walls were weakened by adding glycine (Gly) and DL-threonine (DL-Thr), and the cell-membrane fluidity was elevated by supplementing Tween 80. After optimization of the cell-loosening recipe by response surface methodology (RSM), the transformation efficiency reached 1.13 ± 0.34 × 10(7) cfu/μg syngeneic pUB110 DNA in a low conductivity electroporation buffer. Moreover, by temporary heat inactivation of the host restriction enzyme, a transformation efficiency of 8.94 ± 0.77 × 10(5) cfu/μg DNA was achieved with xenogeneic shuttle plasmids, a 10(3)-fold increase compared to that reported previously. The optimized protocol was also applicable to other recalcitrant B. amyloliquefaciens strains used in this study. This work could shed light on the functional genomics and subsequent strain improvement of the recalcitrant Bacillus, which are difficult to be transformed using conventional methods.

A novel spore protein, ExsM, regulates formation of the exosporium in Bacillus cereus and Bacillus anthracis and affects spore size and shape

Bacillus cereus spores are assembled with a series of concentric layers that protect them from a wide range of environmental stresses. The outermost layer, or exosporium, is a bag-like structure that interacts with the environment and is composed of more than 20 proteins and glycoproteins. Here, we identified a new spore protein, ExsM, from a beta-mercaptoethanol extract of B. cereus ATCC 4342 spores. Subcellular localization of an ExsM-green fluorescent protein (GFP) protein revealed a dynamic pattern of fluorescence that follows the site of formation of the exosporium around the forespore. Under scanning electron microscopy, exsM null mutant spores were smaller and rounder than wild-type spores, which had an extended exosporium (spore length for the wt, 2.40 +/- 0.56 microm, versus that for the exsM mutant, 1.66 +/- 0.38 microm [P < 0.001]). Thin-section electron microscopy revealed that exsM mutant spores were encased by a double-layer exosporium, both layers of which were composed of a basal layer and a hair-like nap. Mutant exsM spores were more resistant to lysozyme treatment and germinated with higher efficiency than wild-type spores, and they had a delay in outgrowth. Insertional mutagenesis of exsM in Bacillus anthracis DeltaSterne resulted in a partial second exosporium and in smaller spores. In all, these findings suggest that ExsM plays a critical role in the formation of the exosporium.

Glass bead transformation method for gram-positive bacteria

A simple, inexpensive and reproducible transformation method was developed for Gram-positive bacteria. It was based on agitation of bacterial protoplasts with glass beads in the presence of DNA and polyethylene glycol. By using this method, introduction of pGK12 into protoplasts of several strains of Gram-positive bacteria was achieved.

Plasmid uptake by bacteria: a comparison of methods and efficiencies

The ability to introduce individual molecules of plasmid DNA into cells by transformation has been of central importance to the recent rapid advancement of plasmid biology and to the development of DNA cloning methods. Molecular genetic manipulation of bacteria requires the development of plasmid-mediated transformation systems that include (1) chemical transformation, (2) electro-transformation, (3) biolistic transformation, and (4) sonic transformation, leading to the introduction of exogenous plasmid DNA into bacterial cells. In this review, the manipulation properties and transformation efficiencies of these techniques are described. In addition to these methods, a conceptually novel transformation technique, namely the hydrogel exposure method, was developed. The hydrogel exposure method, based on the Yoshida effect, provides a significant advance over chemical means for transforming many strains of Escherichia coli and a variety of other bacterial species. The new term "tribos transformation" has been proposed for this novel technique. We also determined that, compared to conventional methods, the hydrogel exposure method is a novel and convenient method by which to transform bacteria.

In situ detection of antibiotic-resistance elements in single Bacillus cereus spores

Rapid detection of Bacillus spores is a challenging task in food and defense industries. In situ labeling of spores would be advantageous for detection by automated systems based on single-cell analysis. Determination of antibiotic-resistance genes in bacterial spores using in situ labeling has never been developed. Most of the in situ detection schemes employ techniques such as fluorescence in situ hybridization (FISH) that target the naturally amplified ribosomal RNA (rRNA). However, the majority of antibiotic-resistance genes has a plasmidic or chromosomal origin and is present in low copy numbers in the cell. The main challenge in the development of low-target in situ detection in spores is the permeabilization procedure and the signal amplification required for detection. This study presents permeabilization and in situ signal amplification protocols, using Bacillus cereus spores as a model, in order to detect antibiotic-resistance genes. The permeabilization protocol was designed based on the different layers of the Bacillus spore. Catalyzed reporter deposition (CARD)-FISH and in situ polymerase chain reaction (PCR) were used as signal amplification techniques. B. cereus was transformed with the high copy number pC194 and low copy number pMTL500Eres plasmids in order to induce resistance to chloramphenicol and erythromycin, respectively. In addition, a rifampicin-resistant B. cereus strain, conferred by a single-nucleotide polymorphism (SNP) in the chromosome, was used. Using CARD-FISH, only the high copy number plasmid pC194 was detected. On the other hand, in situ PCR gave positive results in all tested instances. This study demonstrated that it was feasible to detect antibiotic-resistance genes in Bacillus spores using in situ techniques. In addition, in situ PCR has been shown to be more sensitive and more applicable than CARD-FISH in detecting low copy targets.

Construction of a gene knockout system for application in Paenibacillus alvei CCM 2051T, exemplified by the S-layer glycan biosynthesis initiation enzyme WsfP

The gram-positive bacterium Paenibacillus alvei CCM 2051T is covered by an oblique surface layer (S-layer) composed of glycoprotein subunits. The S-layer O-glycan is a polymer of [-->3)-beta-D-Galp-(1[alpha-D-Glcp-(1-->6)]-->4)-beta-D-ManpNAc-(1-->] repeating units that is linked by an adaptor of -[GroA-2-->OPO2-->4-beta-D-ManpNAc-(1-->4)]-->3)-alpha-L-Rhap-(1-->3)-alpha-L-Rhap-(1-->3)-alpha-L-Rhap-(1-->3)-beta-D-Galp-(1--> to specific tyrosine residues of the S-layer protein. For elucidation of the mechanism governing S-layer glycan biosynthesis, a gene knockout system using bacterial mobile group II intron-mediated gene disruption was developed. The system is further based on the sgsE S-layer gene promoter of Geobacillus stearothermophilus NRS 2004/3a and on the Geobacillus-Bacillus-Escherichia coli shuttle vector pNW33N. As a target gene, wsfP, encoding a putative UDP-Gal:phosphoryl-polyprenol Gal-1-phosphate transferase, representing the predicted initiation enzyme of S-layer glycan biosynthesis, was disrupted. S-layer protein glycosylation was completely abolished in the insertional P. alvei CCM 2051T wsfP mutant, according to sodium dodecyl sulfate-polyacrylamide gel electrophoresis evidence and carbohydrate analysis. Glycosylation was fully restored by plasmid-based expression of wsfP in the glycan-deficient P. alvei mutant, confirming that WsfP initiates S-layer protein glycosylation. This is the first report on the successful genetic manipulation of bacterial S-layer protein glycosylation in vivo, including transformation of and heterologous gene expression and gene disruption in the model organism P. alvei CCM 2051T.

Elaboration of an electroporation protocol for large plasmids and wild-type strains of Bacillus thuringiensis

AIMS

To elaborate an effective electroporation protocol for large plasmids and wild type strains of Bacillus thuringiensis.

METHODS AND RESULTS

The effect of DNA desalting, wall-weakening agency, cell growth conditions, electroporation solutions, and electric fields on electroporation efficiency was evaluated to optimize electroporation conditions for B. thuringiensis. By using this improved method, the greatest efficiency was reached 2 x 10(10 )CFU microg(-1) with pHT304, which is 10(4) times higher than previously reported. Four large plasmids (29.1, 44.9, 58 and 60 kb) were successfully transferred into the acrystalliferous B. thuringiensis strain BMB171; these results have not been achieved with previous protocols. Three wild type B. thuringiensis strains which could not be transformed previously were also transferred successfully.

CONCLUSIONS

This improved method is more efficient for small plasmids; it is also appropriate for large plasmids and wild type B. thuringiensis strains which were not transformed by previous procedures.

SIGNIFICANCE AND IMPACT OF THE STUDY

The present study established an effective electroporation protocol for large plasmids and wild type strains of B. thuringiensis. This method is well suited for the cloning and expression of huge DNA fragments such as gene clusters in B. thuringiensis. It also can be used as a reference method for other Bacillus strains that are refractory to electroporate.

Thirteen posttranslational modifications convert a 14-residue peptide into the antibiotic thiocillin

The thiazolylpeptides are a family of >50 bactericidal antibiotics that block the initial steps of bacterial protein synthesis. Here, we report a biosynthetic gene cluster for thiocillin and establish that it, and by extension the whole class, is ribosomally synthesized. Remarkably, the C-terminal 14 residues of a 52-residue peptide precursor undergo 13 posttranslational modifications to give rise to thiocillin, making this antibiotic the most heavily posttranslationally-modified peptide known to date.

Shuttle expression plasmids for genetic studies in Streptococcus mutans

A set of shuttle plasmids containing four different constitutive promoters was generated to facilitate overexpression of foreign and native genes in streptococci, such as Streptococcus mutans. The four promoters that were chosen were: P(ami), P(spac), P(23) and P(veg). These promoters are active in many Gram-positive bacteria, and allow various levels of gene expression depending on the host bacterium. Shuttle plasmids were constructed based on two types of broad-host-range replication origins: a rolling-circle replicon (pSH71) and a theta replicon (pAMbeta1). Shuttle plasmids derived from the pAMbeta1 replicon were generated to avoid the structural and segregational stability problems associated with rolling-circle replication, since these problems may be encountered during large gene cloning. In a complementation assay, we used one such plasmid to express a gene in trans to show the utility of these plasmids. In addition, a series of plasmids was generated for the expression of recombinant proteins with an N-terminal 6xHis tag or a C-terminal Strep-tag fusion, and, using a gene derived from S. mutans, we showed a high level of recombinant protein expression in S. mutans and Streptococcus pyogenes. Since these plasmids contain broad-host-range replication origins, and because the selected promoters are functional in many bacteria, they can be used for gene expression studies, such as complementation and recombinant protein expression.