Evaluation of ATR-FTIR for analysis of bacterial cellulose impurities

Spontaneous loss of quorum sensing control selects a new high cellulose producing Ancylobacter strain

In recent years the number of non-Acetobacteraceae strains shown to produce nanofibrillar cellulose at the levels of the known Acetobacteraceae producers has increased considerably. The Ancylobacter sp. STN1B isolate capable of cellulose production from naphthalene has previously been described. In this study, Ancylobacter sp. STN1A, a spontaneous STN1B mutant able to produce 1.7 to 9.7 times higher levels of cellulose, has been isolated. The STN1A genome showed a 62 kb deletion encompassing a modified rpf quorum sensing signalling system that included a diguanylate cyclase-phosphodiesterase gene. A knock-out mutant of STN1B rpfC sensor kinase gene produced similarly high cellulose levels than STN1A. This confirmed that the overproducing phenotype resulted from the loss of the rpf system, which resulted in three-time higher c-di-GMP levels. The strains were able to grow on several carbon sources and produce cellulose with properties similar to those of K. xylinus processed similarly, as determined using ATR-FTIR, CP/MAS, 13C NMR, XRD, TGA and SEM, although with higher thermal resistance and water holding capacity. Production was higher under static conditions, rendering 2.5 g/L with glycerol. Interestingly, in this strain cellulose is synthesized from a type-III bcs cluster, which lacks BcsC, BcsD and BcsH sub-units. This first thorough characterization of cellulose produced from a type III cellulose synthesis complex reveals its excellent properties.

Visual detection of uric acid in serum through catalytic oxidation by a novel cellulose membrane biosensor with schiff base immobilized uricase

Uric acid (UA) serves as an important biochemical marker of various diseases, making the development of a novel method for its rapid and straightforward visual detection highly valuable. In this study, a uricase-based cellulose membrane biosensor (UCMB) was constructed by immobilizing uricase via a Schiff base reaction and nitroblue tetrazolium chloride (NBT) through adsorption. The UCMB detects UA through a mechanism in which uricase catalyzes the oxidation of UA, generation O2-· radicals that subsequently oxidize NBT to formazan, producing a distinctive color change from yellow to purple. The UCMB demonstrated successful visual detection of UA within 15 min, allowing for rapid naked-eye analysis. Additionally, the biosensor quantitatively detected UA over a broad linear range from 0 to 1000 μM, with a low detection limit of 3.88 μM. Most notably, the UCMB has accurately measured UA in human serum samples, comparable to the results from a commercial UA meter. These findings suggest that the UCMB can serve as a simple and reliable tool for early diagnosis of UA-related diseases.

Citrate-modified bacterial cellulose as a potential scaffolding material for bone tissue regeneration

Bacterial cellulose (BC) is a novel biocompatible polymeric biomaterial with a wide range of biomedical uses, like tissue engineering (TE) scaffolds, wound dressings, and drug delivery. Although BC lacks good cell adhesion due to limited functionality, its tunable surface chemistry still holds promise. Here, hydroxyapatite (HA) was incorporated into a citrate-modified BC (MBC) using the biomimetic synthesis in simulated body fluid (SBF). Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), thermal gravimetric analysis (TGA), and compressive modulus were used to characterize the biomineralized MBC (BMBC) samples. Using 3-(4,5 dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl) -2H-tetrazolium (MTS), trypan blue dye exclusion (TBDE), and cell attachment assays on osteoblast cells, the developed BMBC have shown good cell viability, proliferation, and attachment after 3, 5, and 7 days of culture and therefore suggested as potential bone tissue regeneration scaffolding material.

Impact of Carbon Source on Bacterial Cellulose Network Architecture and Prolonged Lidocaine Release

The biosynthesis of bacterial cellulose (BC) is significantly influenced by the type of carbon source available in the growth medium, which in turn dictates the material's final properties. This study systematically investigates the effects of five carbon sources-raffinose (C18H32O16), sucrose (C12H22O11), glucose (C6H12O6), arabinose (C5H10O5), and glycerol (C3H8O3)-on BC production by Komagataeibacter hansenii. The varying molecular weights and structural characteristics of these carbon sources provide a framework for examining their influence on BC yield, fiber morphology, and network properties. BC production was monitored through daily measurements of optical density and pH levels in the fermentation media from day 1 to day 14, providing valuable insights into bacterial growth kinetics and cellulose synthesis rates. Scanning electron microscopy (SEM) was used to elucidate fibril diameter and pore size distribution. Wide-angle X-ray scattering (WAXS) provided a detailed assessment of crystallinity. Selected BC pellicles were further processed via freeze-drying to produce a foam-like material that maximally preserves the natural three-dimensional structure of BC, facilitating the incorporation and release of lidocaine hydrochloride (5%), a widely used local anesthetic. The lidocaine-loaded BC foams exhibited a sustained and controlled release profile over 14 days in simulated body fluid, highlighting the importance of the role of carbon source selection in shaping the BC network architecture and its impact on drug release profile. These results highlight the versatility and sustainability of BC as a platform for wound healing and drug delivery applications. The tunable properties of BC networks provide opportunities for optimizing therapeutic delivery and improving wound care outcomes, positioning BC as an effective material for enhanced wound management strategies.

Utilization of Forest Residues for Cellulose Extraction from Timber Species in the High Montane Forest of Chimborazo, Ecuador

The present study explored the extraction of cellulose from forest residues of four timber species, namely Cedrela montana Moritz ex Turcz, Buddleja incana Ruiz & Pav, Vallea stipularis L. f. and Myrsine andina (Mez) Pipoly, in the high montane forest of Chimborazo province, Ecuador, for the sustainable utilization of leaves, branches, and flowers. An alkaline extraction method was used on the residues without the need for prior degreasing. An ANOVA analysis was applied to evaluate significant differences in cellulose extraction yields among the species' residues. The characterization techniques used were Fourier transform infrared spectroscopy (FTIR) and polarized light optical microscopy, which confirmed the successful extraction of cellulose with characteristics comparable to standard cotton cellulose and other traditional species. The results showed significant variations in cellulose yield among the species, with Vallea stipularis L. f achieving the highest yield of 80.83%. The crystallinity of the samples was clearly evidenced by the polarity of the light in the samples during microscopy, demonstrating that the residues can be a viable and sustainable source of cellulose, contributing to a circular economy and reducing the environmental impact of forest waste.

Modulating the Release Kinetics of Natural Product Actinomycin from Bacterial Nanocellulose Films and Their Antimicrobial Activity

The present study aimed to create a more sustainable and controlled delivery system based on natural biopolymer bacterial nanocellulose (BNC) and bacterial natural product actinomycin (Act), with the applicative potential in the biomedical field. In order to provide improved interaction between BNC and the active compound, and thus to modulate the release kinetics, the TEMPO oxidation of BNC support was carried out. A mix of actinomycins from bacterial fermentation (ActX) were used as natural antimicrobial agents with an established bioactivity profile and clinical use. BNC and TEMPO-oxidized BNC films with incorporated active compounds were obtained and analyzed by FTIR, SEM, XPS, and XRD. The ActX release profiles were determined in phosphate-buffer solution, PBS, at 37 °C over time. FTIR analysis confirmed the improved incorporation and efficiency of ActX adsorption on oxidized BNC due to the availability of more active sites provided by oxidation. SEM analysis indicated the incorporation of ActX into the less-dense morphology of the TEMPO-oxidized BNC in comparison to pure BNC. The release kinetics of ActX were significantly affected by the BNC structure, and the activated BNC sample indicated the sustained release of active compounds over time, corresponding to the Fickian diffusion mechanism. Antimicrobial tests using Staphylococcus aureus NCTC 6571 confirmed the potency of this BNC-based system for biomedical applications, taking advantage of the capacity of modified BNC to control and modulate the release of bioactive compounds.

Reactive oxygen species induced oxidative damage to DNA, lipids, and proteins of antibiotic-resistant bacteria by plant-based silver nanoparticles

This study assesses the mechanism of action of plant-based silver nanoparticles (AgNPs) against antibiotic-resistant bacteria. We compared AgNPs synthesized through Salvia moorcroftiana and Origanum vulgare extracts and their conjugates with the antibiotic Ceftriaxone for their capacity to cause oxidative damage through reactive oxygen species (ROS). We quantified ROS in the cells of two bacterial strains after treating them with all AgNP types and observed that AgNPs were most effective in K. pneumoniae as they resulted in the highest ChS1 count (44,675), while in P. aeruginosa, Cfx-AgNPs induced the highest levels of ROS with ChS1 count of 56,865. DNA analysis showed that both plant-based AgNPs (O-AgNPs = 0.192 and S-AgNPs = 0.152) were most effective in K. pneumoniae and S-AgNPs (abs = 0.174) and O-Cfx-AgNPs (abs = 0.261) in P. aeruginosa. We observed a significant increase in the levels of conjugated dienes (86.4 μM) and malondialdehyde (172.25 nM) in the bacterial strains after treatment with AgNPs, compared to the control (71.65 μM and 18.064 nM, respectively, in K. pneumoniae and P. aeruginosa). These results indicate lipid peroxidation. AgNPs also increased the levels of protein thiols (0.672 nM) compared to the control (0.441 nM) in K. pneumoniae, except for Chem-AgNPs (0.21 nM). These results suggest that plant-based AgNPs are more effective in oxidizing bacterial DNA, protein, and lipids than Chem-AgNPs. Furthermore, protein oxidation varied between AgNPs alone and AgNPs-antibiotic conjugates. The highest levels of protein thiols were found in the samples treated with O-Cfx-AgNPs (0.672 nM and 0.525 nM in K. pneumoniae and P. aeruginosa, respectively). The results demonstrated that AgNPs kill bacteria by altering bacterial macromolecules such as DNA, lipids, and proteins.

Native bacterial cellulose films based on kombucha pellicle as a potential active food packaging

The production of kombucha involves the synthesis of a bacterial cellulose-based native film by a microbial consortium, typically regarded as a waste by-product in commercial kombucha manufacturing. In this study, films were successfully obtained using the microbial consortium of kombucha, combined with infusions of black tea, green tea, rosehip, coffee, and licorice. These films exhibited a flexible rubbery-like structure and demonstrated inherent biological activity. Comparative analysis revealed that the licorice-based films exhibited a regular and less porous structure, while the green and black tea-based films displayed a porous structure, resulting in higher water permeability and swelling. Remarkably, green tea-based films showcased notable antioxidant activity (DPPH: %74.22 ± 2.05, ABTS: %81.59 ± 2.39) and exhibited antimicrobial properties against E. coli, S. aureus, and B. cereus, owing to their high phenolic content (1.62 ± 0.04 μg GAE/g). The antimicrobial efficacy of green tea-based films surpassed that of the other films against pathogenic microorganisms. By enhancing their hydrophobic properties, these innovative films hold promising potential as cost-effective, active, and environmentally friendly materials for food packaging applications.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05808-x.

The application of biosurfactant-producing bacteria immobilized in PVA/SA/bentonite bio-composite for hydrocarbon-contaminated soil bioremediation

Oil spills that contaminate the environment can harm the surrounding ecosystem. The oil contains petroleum hydrocarbon which is toxic to the environment hence it needs to be removed. The use of bacteria as remediation media was modified by immobilizing into a matrix hence the bacteria can survive in harsh conditions. In this research, the ability of biosurfactant-producing bacteria (Pseudomonas aeruginosa, Bacillus subtilis, and Ralstonia pickettii) immobilized in the PVA/SA/bentonite matrix was tested in remediation on oil-contaminated soil. The immobilized beads filled with bacteria were added to the original soil sample, as well as washed soil. The beads were characterized by using FTIR and SEM. Based on FTIR analysis, the PVA/SA/bentonite@bacteria beads had similar functional groups compared to each other. SEM analysis showed that the beads had non-smooth structure, while the bacteria were spread outside and agglomerated. Furthermore, GC-MS analysis results showed that immobilized B. subtilis and R. pickettii completely degraded tetratriacontane and heneicosane, respectively. Meanwhile, after soil washing pre-treatment, immobilized bacteria could completely degrade octadecane (P. aeruginosa and R. pickettii) and tetratriacontane (P. aeruginosa and B. subtilis). Based on those results, immobilized bacteria could degrade oil compounds. The degradation result was influenced by the enzymes produced, the ability of the bacteria, the suitability of the test media, and the matrix used. Therefore, this study can be a reference for further soil remediation using eco-friendly methods.

Multifunction smart nanocomposite film for food packaging based on carboxymethyl cellulose/Kombucha SCOBY/pomegranate anthocyanin pigment

Active packing systems employed to preserve food quality have gone through chains of sustainable development processes, reflecting the growth in consumer awareness of high-quality foods in eco-friendly packaging. Consequently, this study aims to develop antioxidant, antimicrobial, UV-shielding, pH-sensitive, edible, and flexible films from composites of carboxymethyl cellulose (CMC), pomegranate anthocyanin extract (PAE), and various fractions (1-15 %) of bacterial cellulose from the Kombucha SCOBY (BC Kombucha). Various analytical tools such as ATR-FTIR, XRD, TGA, and TEM were utilized to investigate the physicochemical characterization of BC Kombucha and CMC-PAE/BC Kombucha films. The DDPH scavenging test demonstrated the efficiency of PAE as a matrix with potent antioxidant properties, both as a solution and enclosed in composite films. The fabricated films of CMC-PAE/BC Kombucha showed antimicrobial activities against many pathogenic Gram-negative (Pseudomonas aeruginosa, Salmonella sp., and Escherichia coli), Gram-positive (Listeria monocytogenes and Staphylococcus aureus) bacteria, and Candida albicans, ranging from a 20 to 30 mm inhibition zone. The CMC-PAE/BC Kombucha nanocomposite has additionally been utilized to pack red grapes and plums. The results illustrated that CMC-PAE/BC Kombucha nanocomposite can increase red grapes and plums' shelf lives by up to 25 days while maintaining the fruits' quality better than those left unpacked.

Gaining control of bacterial cellulose colonization by polyhydroxyalkanoate-producing microorganisms to develop bioplasticized ultrathin films

Synergistic methodological strategies based on the fields of microbial biotechnology and materials science open up an enormous range of possibilities for the sustainable production of advanced materials with predictable properties. This study shows how naturally produced polyhydroxyalkanoate (PHA) particles are introduced into bacterial cellulose (BC) driven by their bacterial producers. Thanks to an extensive knowledge of the internal structure of BC, it was possible to control the colonization process, i.e. loading and localization of PHA. A subsequent acid treatment favored the PHA-BC bonding at the position reached by the bacteria. These biodegradable films showed improved mechanical and barrier properties even with respect to reference plastic films 8 times thicker, reaching a Young's modulus 4.25 times higher and an oxygen permeability 3 times lower than those of polyethylene terephthalate (PET) films. Owing to the versatility of the method, a wide variety of materials can be developed for very diverse fields of application.

In Vivo Modification of Microporous Structure in Bacterial Cellulose by Exposing Komagataeibacter xylinus Culture to Physical and Chemical Stimuli

Bacterial cellulose (BC) samples were obtained in a static culture of K. xylinus under the effect of a low-intensity magnetic field, UV light, NaCl, and chloramphenicol. The effect of such stimuli on the amount of BC produced and its production rate, specific area, pore volume, and pore diameter were evaluated. The polysaccharide production was enhanced 2.28-fold by exposing K. xylinus culture to UV light (366 nm) and 1.7-fold by adding chloramphenicol (0.25 mM) to the medium in comparison to BC control. All the stimuli triggered a decrease in the rate of BC biosynthesis. BC membranes were found to be mesoporous materials with an average pore diameter from 21.37 to 25.73 nm. BC produced under a magnetic field showed the lowest values of specific area and pore volume (2.55 m² g⁻¹ and 0.024 cm³ g⁻¹), while the BC synthesized in the presence of NaCl showed the highest (15.72 m² g⁻¹ and 0.11 cm³ g⁻¹). FTIR spectra of the BC samples also demonstrated changes related to structural order. The rehydration property in these BC samples is not mainly mediated by the crystallinity level or porosity. In summary, these results support that BC production, surface, and structural properties could be modified by manipulating the physical and chemical stimuli investigated.

Bacterial cellulose films production by Kombucha symbiotic community cultured on different herbal infusions

The symbiotic community of bacteria and yeast (SCOBY) of Kombucha beverage produces a floating film composed of bacterial cellulose, a distinctive biobased material. In this work, Kombucha fermentation was carried out in six different herbal infusions, where SCOBY was able to synthesise cellulosic films. Infusions of black and green tea, yerba mate, lavender, oregano and fennel added with sucrose (100 g/l) were used as culture media. In all cultures, film production resulted in a maximum after 21 days. Yield conversion, process productivity and antioxidant activity were quantified. Macroscopic and microscopic features of films were determined based on electronic microscopy, calorimetric and mechanical properties and hydration behaviour. Native films from yerba mate had a remarkable antioxidant activity of 93 ± 4% of radical inhibition due to plant polyphenols, which could prevent food oxidation. Results revealed that films retained natural bioactive substances preserving important physicochemical properties, essential for developing active materials.

Zeolitic imidazolate framework-8/Bacterial Cellulose Composite for Iodine Loading and Its Antibacterial Performance

Bacterial cellulose (BC), produced by bacteria and fungi, is a promising material in the biomedical field. However, non-antibacterial activity limits its broad applications. Herein, antibacterial composites (BC/ZIF-8-Iodine) were prepared by...

Highly Stretchable Bacterial Cellulose Produced by Komagataeibacter hansenii SI1

A new strain of bacteria producing cellulose was isolated from Kombucha and identified as Komagataeibacter hansenii, named SI1. In static conditions, the strain synthesises bacterial nanocellulose with an improved ability to stretch. In this study, utilisation of various carbon and nitrogen sources and the impact of initial pH was assessed in terms of bacterial nanocellulose yield and properties. K. hansenii SI1 produces cellulose efficiently in glycerol medium at pH 5.0-6.0 with a yield of 3.20-3.60 g/L. Glucose medium led to the synthesis of membrane characterised by a strain of 77%, which is a higher value than in the case of another Komagataeibacter species. Supplementation of medium with vitamin C results in an enhanced porosity and improves the ability of bacterial nanocellulose to stretch (up to 123%). The properties of modified membranes were studied by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and mechanical tests. The results show that bacterial nanocellulose produced in SH medium and vitamin C-supplemented medium has unique properties (porosity, tensile strength and strain) without changing the chemical composition of cellulose. The method of production BNC with altered properties was the issue of Polish patent application no. P.431265.

Furfuryl alcohol/tung oil matrix-based composites reinforced with bacterial cellulose fibres

Polymeric materials have drastically changed the society in the last century. However, their non-renewable origin, together with their indiscriminate use and disposal, resulted in a huge accumulation of waste in the environment and raised a wide discussion about the emission of greenhouse gases, which must be considerably reduced to minimize global warming. Thus, the establishment of a consolidated production of polymers prioritizing the use of renewable sources of raw materials became a hot research topic. Vegetable oils are protagonists of this initiative, and their carbon-carbon double bonds are convenient reactive sites for chain growth polymerization reactions. However, typical vegetable oil-based homopolymers often do not display competitive thermo-mechanical properties, and the preparation of the corresponding copolymers and composites is therefore an interesting alternative strategy. Herein, the preparation of composites based on a tung oil/furfuryl alcohol co-continuous network reinforced with bacterial cellulose fibers is described. For this purpose, the cellulose nanofibers were suspended in furfuryl alcohol, and different amounts of the ensuing suspension were mixed with tung oil in the presence of trifluoroacetic acid as cationic initiator. Fourier-transform infrared spectroscopy analysis of all samples indicated the association of both tung oil and furfuryl alcohol in the final materials, with peaks belonging to cellulose superposed at the fingerprint regions of composites. Differential scanning calorimetry and thermogravimetry demonstrated an interesting relationship between the composition and the corresponding thermal properties, and the morphology of the materials was assessed by scanning electron microscopy (SEM), which revealed a homogeneous distribution of cellulosic fibers at lower concentrations. The results gathered here contribute to the development of original macromolecular materials exclusively based on the renewable platform.

Bacterial Cellulose Retains Robustness but Its Synthesis Declines After Exposure to a Mars-like Environment Simulated Outside the International Space Station

Cellulose is a widespread macromolecule in terrestrial environments and a major architectural component of microbial biofilm. Therefore, cellulose might be considered a biosignature that indicates the presence of microbial life. We present, for the first time, characteristics of bacterial cellulose after long-term spaceflight and exposure to simuled Mars-like stressors. The pristine cellulose-based pellicle membranes from a kombucha microbial community (KMC) were exposed outside the International Space Station, and after their return to Earth, the samples were reactivated and cultured for 2.5 years to discern whether the KMC could be restored. Analyses of cellulose polymer integrity and mechanical properties of cellulose-based pellicle films, as well as the cellulose biosynthesis-related genes' structure and expression, were performed. We observed that (i) the cellulose polymer integrity was not significantly changed under Mars-like conditions; (ii) de novo cellulose production was 1.5 times decreased in exposed KMC samples; (iii) the dry cellulose yield from the reisolated Komagataeibacter oboediens was 1.7 times lower than by wild type; (iv) there was no significant change in mechanical properties of the de novo synthesized cellulose-based pellicles produced by the exposed KMCs and K. oboediens; and (v) the gene, encoding biosynthesis of cellulose (bcsA) of the K. oboediens, was downregulated, and no topological change or mutation was observed in any of the bcs operon genes, indicating that the decreased cellulose production by the space-exposed samples was probably due to epigenetic regulation. Our results suggest that the cellulose-based pellicle could be a good material with which to protect microbial communities during space journeys, and the cellulose produced by KMC members could be suitable in the fabrication of consumer goods for extraterrestrial locations.

Facile Postprocessing Alters the Permeability and Selectivity of Microbial Cellulose Ultrafiltration Membranes

Water filtration membranes produced sustainably through microbial cellulose production can have filtration properties altered through facile chemical treatments. Microbial cellulose is an effective membrane filtration medium, and pristine microbial membranes can serve as ultrafiltration membranes with a permeability of 143 L m^-2h^-1bar^-1 and a particle size cut off of 35 nm. As living biofilms, these membranes consist of microbial cellulose, bacteria, and extracellular polymers. Thus, additional biofilm components may reduce the intrinsic permeability of the cellulose. Here, microbial membranes were treated with hydrogen peroxide (H₂O₂) and sodium hypochlorite (NaOCl, liquid bleach) to remove impurities present in microbial cellulose and increase membrane permeability. For example, permeability increased from 143 to 257 L m^-2h^-1bar^-1 with treatment by 0.3% H₂O₂ for 12 min. The membranes were also treated with sodium hydroxide (NaOH) to increase membrane selectivity, and the particle size cutoff was reduced from 35 to 10 nm post-treatment with 0.8% NaOH for 20 min. Scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, contact angle goniometry, and X-ray diffraction were used to characterize the physical and chemical properties of the membrane matrix. Facile chemical treatments provide a significant degree of flexibility to tailor microbial membranes to meet specific needs. Microbial membrane production is inherently accessible, and this study furthers that accessibility by utilizing only readily available components to treat microbial membranes and expand their potential applications.

Antibacterial Activity of Bacterial Cellulose Loaded with Bacitracin and Amoxicillin: In Vitro Studies

The use of bacterial cellulose (BC) in skin wound treatment is very attractive due to its unique characteristics. These dressings’ wet environment is an important feature that ensures efficient healing. In order to enhance the antimicrobial performances, bacterial-cellulose dressings were loaded with amoxicillin and bacitracin as antibacterial agents. Infrared characterization and thermal analysis confirmed bacterial-cellulose binding to the drug. Hydration capacity showed good hydrophilicity, an efficient dressing’s property. The results confirmed the drugs’ presence in the bacterial-cellulose dressing’s structure as well as the antimicrobial efficiency against Staphylococcus aureus and Escherichia coli. The antimicrobial assessments were evaluated by contacting these dressings with the above-mentioned bacterial strains and evaluating the growth inhibition of these microorganisms.

Novel bacterial cellulose membrane biosynthesized by a new and highly efficient producer Komagataeibacter rhaeticus TJPU03

Bacterial cellulose(BC) is a kind of extracellular polymer synthesized by bacteria and it has very wide applications in many fields. However, the application of BC in a large commercial scale can still not be fulfilled due to the low yield and demanding for BC membranes with very different properties. To this end, a new BC-producer Komagataeibacter rhaeticus TJPU03 was isolated from rotten orange peel, which produced 8.28 ± 0.27 g/L(dry weight) in standard HS medium at the 10th day. The membrane is easier to be purified by one-step alkaline treatment and the produced BC(K-BC) membranes possess homogeneous, looser and more porous three-dimensional network composed by thinner cellulose fibrils. However, the wet K-BC possesses stronger mechanical properties and exhibits lower toxicity and higher cytocompatibility to mammalian cell. Owing to the more porous and homogeneous network, K-BC possesses high loading capacity of cell and protein drugs. Also, it exhibits sustained-controlled release ability for proteinaceous drug. The high yield of this strain and the special characteristics of K-BC predict this strain to be a very promising BC-producer and broad applications of K-BC in the fields of wound healing, scaffolds of tissue engineering, tissue repair and regeneration.

Bacterial nanocellulose production from naphthalene

Polycyclic aromatic compounds (PAHs) are toxic compounds that are released in the environment as a consequence of industrial activities. The restoration of PAH-polluted sites considers the use of bacteria capable of degrading aromatic compounds to carbon dioxide and water. Here we characterize a new Xanthobacteraceae strain, Starkeya sp. strain N1B, previously isolated during enrichment under microaerophilic conditions, which is capable of using naphthalene crystals as the sole carbon source. The strain produced a structured biofilm when grown on naphthalene crystals, which had the shape of a half-sphere organized over the crystal. Scanning electron microscopy (SEM) and GC-MS analysis indicated that the biofilm was essentially made of cellulose, composed of several micron-long nanofibrils of 60 nm diameter. A cellulosic biofilm was also formed when the cells grew with glucose as the carbon source. Fourier transformed infrared spectroscopy (FTIR) confirmed that the polymer was type I cellulose in both cases, although the crystallinity of the material greatly depended on the carbon source used for growth. Using genome mining and mutant analysis, we identified the genetic complements required for the transformation of naphthalene into cellulose, which seemed to have been successively acquired through horizontal gene transfer. The capacity to develop the biofilm around the crystal was found to be dispensable for growth when naphthalene was used as the carbon source, suggesting that the function of this structure is more intricate than initially thought. This is the first example of the use of toxic aromatic hydrocarbons as the carbon source for bacterial cellulose production. Application of this capacity would allow the remediation of a PAH into such a value-added polymer with multiple biotechnological usages.