Thermally responsive gold nanocatalysts based on a modified poly-vinylpyrrolidone

Synergistic reduction of nitrophenols by Au-CDs nanoconjugates with NaBH4

Developing sustainable and innovative approaches for the efficient reduction of nitrophenols is crucial for environmental remediation, for managing health concerns posed by their widespread presence as hazardous pollutants in industrial effluents and contaminated water. We report the use of 12.9 ± 1 nm (TEM data) sized gold carbon dot nanoconjugates (Au@CDs) for catalytic conversion of o, m, p-nitrophenols to aminophenols by sodium borohydride. A simple approach was followed to synthesize ultra-small and highly stable Au@CDs, using citric acid and PEG as reducing and stabilizing agents. X-ray diffraction analysis verified the formation of nano-crystalline nanoconjugates. These nanoconjugates showed a remarkable catalytic activity in the range of 0.22-0.33 s-1(varying with nanoconjugate concentration) which was much higher compared to conventional chemical methods of reduction. All the catalytic reaction experiments were performed at room temperature (27 ± 2 °C). Furthermore, an increase in rate constant was observed with increasing concentration of nanoconjugates. The catalytic activity of Au@CDs nanoconjugates was observed to be in order of m-nitrophenol > o-nitrophenol > p-nitrophenol with apparent rate constant (kaap) values of 0.068, 0.043 and 0.031, respectively. Comparative analysis with GNPs, CDs and Au@CDs nanoconjugates stated that the nanoconjugates had superior catalytic activity. The research can have significant implications in the development of new strategies for environmental remediation and biomedical applications.

In Situ Self-Assembly of Ultrastable Gold Nanoparticles on Polyvinyl Alcohol Nanofibrous Mats for Use as Highly Reusable Catalysts

Designing highly stable and reusable catalytic systems based on Au nanoparticles (NPs) is a significant challenge in nanocatalysis research. Here, we have fabricated polyvinyl alcohol (PVA) nanofibrous mat/Au NP composite catalysts with NPs in uniform size and good distribution by use of a developed in situ growth approach. In this method, Au seeds were first adsorbed on PVA nanofibrous mat surfaces rather than on relatively large Au NPs and then used to grow NPs in Au seed solution; thus, the steric hindrance effect was alleviated and a high loading was used for Au NPs up to 11 wt %. Strong interfacial interactions between the Au NPs and the PVA nanofibrous mats due to introducing a large number of hydrogen bonds provide high thermal stability for the PVA side chains, long-term catalytic stability, and excellent reusability. Consequently, the proposed in situ grown PVA/Au NP nanofibrous mats produce high catalytic activity for at least 15 cycles over a 30 d period. This work provides a potential approach for fabricating highly stable and reusable metal NPs on polymer nanofibrous mats to facilitate a wide variety of applications.

Temperature-Responsive Polymersomes of Poly(3-methyl-N-vinylcaprolactam)-block-poly(N-vinylpyrrolidone) To Decrease Doxorubicin-Induced Cardiotoxicity

Despite being one of the most potent chemotherapeutics, doxorubicin (DOX) facilitates cardiac toxicity by irreversibly damaging the cardiac muscle as well as severely dysregulating the immune system and impairing the resolution of cardiac inflammation. Herein, we report synthesis and aqueous self-assembly of nanosized polymersomes from temperature-responsive poly(3-methyl-N-vinylcaprolactam)-block-poly(N-vinylpyrrolidone) (PMVC-PVPON) diblock copolymers and demonstrate their potential to minimize DOX cardiotoxicity compared to liposomal DOX. RAFT polymerization of vinylpyrrolidone and 3-methyl-N-vinylcaprolactam, which are structurally similar monomers but have drastically different hydrophobicity, allows decreasing the cloud point of PMVC_m-PVPON_n copolymers below 20 °C. The lower critical solution temperature (LCST) of the PMVC₅₈-PVPON_n copolymer varied from 19.2 to 18.6 and to 15.2 °C by decreasing the length of the hydrophilic PVPON_n block from n = 98 to n = 65 and to n = 20, respectively. The copolymers assembled into stable vesicles at room temperature when PVPON polymerization degrees were 65 and 98. Anticancer drug DOX was entrapped with high efficiency into the aqueous PMVC₅₈-PVPON₆₅ polymersomal core surrounded by the hydrophobic temperature-sensitive PMVC shell and the hydrophilic PVPON corona. Unlike many liposomal, micellar, or synthetic drug delivery systems, these polymersomes exhibit an exceptionally high loading capacity of DOX (49%) and encapsulation efficiency (95%) due to spontaneous loading of the drug at room temperature from aqueous DOX solution. We also show that C57BL/6J mice injected with the lethal dose of DOX at 15 mg kg^-1 did not survive the 14 day treatment, resulting in 100% mortality. The DOX-loaded PMVC₅₈-PVPON₆₅ polymersomes did not cause any mortality in mice indicating that they can be used for successful DOX encapsulation. The gravimetric analyses of the animal organs from mice treated with liposome-encapsulated DOX (Lipo-DOX) and PMVC₅₈-PVPON₆₅ polymersomes (Poly-DOX) revealed that the Lipo-DOX injection caused some toxicity manifesting as decreased body weight compared to Poly-DOX and saline control. Masses of the left ventricle of the heart, lung, and spleen reduced in the Lipo-DOX-treated mice compared to the nontoxic saline control, while no significant decrease of those masses was observed for the Poly-DOX-treated mice. Our results provide evidence for superior stability of synthetic polymersomes in vivo and show promise for the development of next-generation drug carriers with minimal side effects.

Graphene Oxide-Supported Catalyst with Thermoresponsive Smart Surface for Selective Hydrogenation of Cinnamaldehyde

In this study, a graphene oxide (GO)-based thermoresponsive smart catalytic material with a phase-transition temperature of approximately 37 °C was developed by growing poly( N-isopropylacrylamide) (PNIPAM) on GO sheets (i.e., GO-PNIPAM). The composite was characterized by Fourier transform infrared spectroscopy, N₂ adsorption, thermogravimetric analysis, organic elemental analysis, differential scanning calorimetry, and X-ray photoelectron spectroscopy. GO-PNIPAM-supported Ru catalysts (i.e., Ru/GO-PNIPAM) were then prepared for cinnamaldehyde (CAL) hydrogenation. The influence of thermosensitive smart surface on the reaction was investigated. Results indicated that GO-PNIPAM exhibited the hydrophilic surface at 25 °C, which resulted in highly dispersed Ru nanoparticles on the composite. Afterward, the surface wettability of Ru catalyst was spontaneously changed to hydrophobicity at 70 °C that greatly improved CAL sorption on the catalyst in the reaction. The synergistic effect between Ru and GO-PNIPAM as well as the great adsorption ability to reactants on Ru/GO-PNIPAM jointly resulted in the enhancement of catalytic activity over it in comparison to that over GO-supported Ru catalyst (Ru/GO). Meanwhile, the hydrophobic surface of Ru/GO-PNIPAM at a high-temperature preferred C═O adsorption mode, yielding a higher cinnamyl alcohol selectivity than Ru/GO did.

Polydopamine as a bridge to decorate monodisperse gold nanoparticles on Fe3O4 nanoclusters for the catalytic reduction of 4-nitrophenol

The in situ assembly of Au nanoparticles on Fe₃O₄@PDA showed excellent recyclability and good stability for the catalytic reduction of 4-nitrophenol.

Efficient mineralization of phenol by a temperature-responsive polyoxometalate catalyst under wet peroxide oxidation at lower temperatures

Herein, a temperature-responsive polyoxometalate (POM) catalyst [C₁₆H₃₃(CH₃)₃N]₃[PO₄{WO(O₂)₂}₄]/poly(N-isopropylacrylamide) (abbreviated as (C₁₆PW(O₂)₂/PNIPAM) was prepared and used in the catalytic wet peroxide oxidation (CWPO) of phenol under mild conditions.

Temperature-dependent catalytic reduction of 4-nitrophenol based on silver nanoclusters protected by a thermo-responsive copolymer ligand

A facile strategy is developed for fabricating novel nanocatalysts of Ag NCs protected with a temperature-responsive copolymer ligand containing 8-hydroxyquinoline and isopropylacrylamide segments.

3D hierarchical CuO/Co3O4 core–shell nanowire array on copper foam for on-demand hydrogen generation from alkaline NaBH4 solution

A 3D hierarchical CuO/Co₃O₄ core–shell nanowire array works as a robust and highly active catalyst toward the hydrolytic dehydrogenation of NaBH₄ for on-demand hydrogen generation in alkaline solutions.

In Situ formation of pH-/thermo-sensitive nanohybrids via friendly-assembly of poly(N-vinylpyrrolidone) onto LAPONITE®

Decoration of silicate nanodisks with a pH-sensitive polymer allows for the effective delivery of an anticancer drug in cancer cells with high efficacy.

Manipulating ligand–nanoparticle interactions and catalytic activity through organic-aqueous tunable solvent recovery

Tunable solvents are leveraged to recover dispersed, PVP-stabilized gold nanoparticles and to manipulate the amount of ligand passivating the surface thereby altering the catalytic activity.

Rational control of nano-scale metal-catalysts for biomass conversion

This feature article discusses the rational control of nano-scale metal catalysts for catalytic biomass transformation.

The support effect on the size and catalytic activity of thiolated Au₂₅ nanoclusters as precatalysts

In this study, 6-mercaptohexanoic (MHA) protected Au25(MHA)18 nanoclusters (or thiolated Au NCs) deposited on various inorganic supports, including hydroxyapatite (HAP), TiO2 (Degussa P25), activated carbon (AC), pyrolyzed graphene oxide (PGO), and fumed SiO2 were prepared via a conventional impregnation method. Following that, calcination under a N2 stream was conducted to produce surface ligand free, highly dispersed Au NCs catalysts. The effects of supports on the size and catalytic activity of Au NCs were systematically investigated. No obvious size growth was observed for Au NCs on HAP and P25 after thermally induced ligand removal, due to the strong interaction between the metal and the supports. However, severe aggregations of Au NCs were seen after thermal treatment on three other supports, including AC, PGO, and SiO2. The removal of surface thiol ligands from the Au NCs is crucial to catalyze nitrobenzene hydrogenation, where only calcined Au/HAP and Au/P25 exhibited good catalytic activity. On the other hand, all the supported Au NCs were active for the styrene oxidation, where Au/HAP exhibited the best catalytic performance. Altogether, both the size effect and metal-support interaction are crucial for the design of supported Au NCs as efficient catalysts for targeted reactions.

Effect of residue structure on the thermal and thermoresponsive properties of γ-substituted poly(N-acryloyl-2-pyrrolidones)

We discuss the results of an investigation into the structure/property correlations of γ-substituted poly(N-acryloyl-2-pyrrolidone)s, a recently reported class of pyrrolidone-based polymers prepared from pyroglutamic acid, a bio-derived resource.

Nanometallic chemistry: deciphering nanoparticle catalysis from the perspective of organometallic chemistry and homogeneous catalysis

Nanoparticle (NP) catalysis is traditionally viewed as a sub-section of heterogeneous catalysis. However, certain properties of NP catalysts, especially NPs dispersed in solvents, indicate that there could be benefits from viewing them from the perspective of homogeneous catalysis. By applying the fundamental approaches and concepts routinely used in homogeneous catalysis to NP catalysts it should be possible to rationally design new nanocatalysts with superior properties to those currently in use.