Oxidative degradation of pentabromophenol in the presence of humic substances catalyzed by a SBA-15 supported iron-porphyrin catalyst

Apoptosis-Inducing Potential of Selected Bromophenolic Flame Retardants 2,4,6-Tribromophenol and Pentabromophenol in Human Peripheral Blood Mononuclear Cells

(1) Background: 2,4,6-Tribromophenol (2,4,6-TBP) and pentabromophenol (PBP) are utilized as brominated flame retardants (BFRs) in order to reduce the combustion of materials used in various utility products. The presence of 2,4,6-TBP and PBP has been reported in environmental samples as well as in inhaled air, dust, food, drinking water, and the human body. To date, there are limited data concerning the toxic action of 2,4,6-TBP and particularly PBP, and no study has been conducted to assess the apoptotic mechanism of action of these substances in human leukocytes. (2) Methods: PBMCs were isolated from leukocyte–platelet buffy coat and treated with tested substances in concentrations ranging from 0.01 to 50 µg/mL for 24 h. The apoptotic mechanism of action of the tested BFRs was assessed by the determination of phosphatidylserine exposure on the PBMCs surface, the evaluation of mitochondrial potential and cytosolic calcium ion levels, and the determination of caspase-8, -9, and -3 activation. Moreover, poly (ADP-ribose) polymerase-1 (PARP-1) cleavage, DNA fragmentation, and chromatin condensation were analyzed. (3) Results: 2,4,6-TBP and, more strongly, PBP induced apoptosis in PBMCs, changing all tested parameters. It was also found that the mitochondrial pathway was mainly involved in the apoptosis of PBMCs exposed to the studied compounds. (4) Conclusions: 2,4,6-TBP and PBP triggered apoptosis in human PBMCs, and some observed changes occurred at 2,4,6-TBP concentrations that were detected in humans occupationally exposed to this substance.

Formation of brominated by-products during the degradation of tetrabromobisphenol S by Co2+/peroxymonosulfate oxidation

Tetrabromobisphenol S (TBBPS), an emerging brominated flame retardant, can cause neurotoxic and cytotoxic effects to human physiology. In this study, the degradation of TBBPS in Co²⁺ activated peroxymonosulfate (PMS) oxidation process was explored. In particular, brominated by-products formed during the degradation of the TBBPS were examined. It was found that TBBPS could be effectively removed in the Co²⁺/PMS oxidation process. The pseudo-first-order rate constants were 0.13 min^-1 at 0.2 mM PMS and 0.5 μM Co²⁺ initially. It appeared that TBBPS degradation occurred via and HO attacks, but played a dominant role. The presence of natural organic matter (NOM) greatly inhibited the transformation of the TBBPS, which can be explained by the scavenging of the radical species. β-Scission, debromination, and cross-coupling were identified as the main reaction pathways of TBBPS degradation in the Co²⁺/PMS system. Further oxidation and ring-opening of the intermediates generated brominated by-products including bromoform, monobromoacetic acid, and dibromoacetic acid. The formation of the brominated by-products increased gradually in approximately 48 h. But, the presence of NOM reduced the yields of the brominated -by-products. The findings of this study indicate that organic bromine contaminants can be effectively removed but lead to brominated by-products in the activated PMS oxidation process, which should be taken into consideration when -based oxidation technology is applied.

Porphyrins and Phthalocyanines on Solid-State Mesoporous Matrices as Catalysts in Oxidation Reactions

The review presents recent examples of heterogenic catalysts based on porphyrins and phthalocyanines loaded on mesoporous materials, such as MCM-41, SBA-15, MCM-48, SBA-16 or Al-MCM-41. Heterogenic approach to catalysis eases recovery, reuse and prevent macrocycle aggregation. In this application, mesoporous silica is a promising candidate for anchoring macrocycle and obtaining a new catalyst. Introduction of porphyrin or phthalocyanine into the mesoporous material may be performed through adsorption of the macrocycle, or by its in situ formation—by reaction of substrates introduced to the pores of the catalytic material. Catalytic reactions studied are oxidation processes, focused on alkane, alkene or arene as substrates. The products obtained are usually epoxides, alcohols, ketones, aldehydes or acids. The greatest interest lies in oxidation of cyclohexane and cyclohexene, as a source of adypic acid and derivatives. Some of the reactions may be viewed as biomimetic processes, resembling processes that occur in vivo and are catalyzed by cytochrome P450 enzyme family.

A review on environmental occurrence, toxic effects and transformation of man-made bromophenols

Brominated phenols (BPs) of anthropogenic origin are aromatic substances widely used in the industry as flame retardants (FRs) and pesticides as well as the components of FRs and polymers. In this review, we have focused on describing 2,4-dibromophenol (2,4-DBP), 2,4,6-tribromophenol (2,4,6-TBP) and pentabromophenol (PBP), which are the most commonly used in the industry and are the most often detected in the air, aquatic and terrestrial ecosystems and the human body. This review describes human-related sources of these BPs that influence their occurrence in the environment (atmosphere, surface water, sediment, soil, biota), indoor air and dust, food, drinking water and the human organism. Data from in vitro and in vivo studies showing 2,4-DBP, 2,4,6-TBP and PBP toxicity, including their estrogenic activity, effects on development and reproduction, perturbations of cellular redox balance and cytotoxic action have been described. Moreover, the processes of BPs transformation that occur in human and other mammals, plants and bacteria have been discussed. Finally, the effect of abiotic factors (e.g. UV irradiation and temperature) on BPs conversion to highly toxic brominated dioxins and brominated furans as well as polybrominated biphenyls and polybrominated diphenyl ethers has been presented.

Oxidative degradation of 2,4,6-tribromophenol by SBA-15 supported metal tetrakis(1-methylpyridinium-4-yl)porphyrins in the presence of humic substances

Metal tetrakis(1-methylpyridinium-4-yl)porphyrins were immobilized on sulfonated SBA-15 (MTMPyP-SO₃-pr-SBA-15, M = Fe, Mn, Zn) for oxidative degradation of 2,4,6-tribromophenol in the presence of humic substances. The influence of the central metal of metalloporphyrins, pH, and catalyst dosage on the 2,4,6-tribromophenol degradation was investigated. FeTMPyP-SO₃-pr-SBA-15 and MnTMPyP-SO₃-pr-SBA-15 showed the catalytic activities. The activity of MnTMPyP-SO₃-pr-SBA-15 was more strongly inhibited by humic substances than that of FeTMPyP-SO₃-pr-SBA-15. Kinetic study indicated that humic substances suppressed the generation of high valent metal-oxo species in MnTMPyP-SO₃-pr-SBA-15 at slightly acid condition. There was a clear linear relationship between the content of phenolic-OH and aromatic-C in humic substances and the corresponding inhibition ability. The inhibition by humic substances is probably ascribed to the coordination of humic substances with the monopersulfate species of MnTMPyP-SO₃-pr-SBA-15, which prevented the formation of the reactive Mn-oxo species.

Robust Mn(III) N-pyridylporphyrin-based biomimetic catalysts for hydrocarbon oxidations: heterogenization on non-functionalized silica gel versus chloropropyl-functionalized silica gel

Two classes of heterogenized biomimetic catalysts were prepared and characterized for hydrocarbon oxidations: (1) by covalent anchorage of the three Mn(iii) meso-tetrakis(2-, 3-, or 4-pyridyl)porphyrin isomers by in situ alkylation with chloropropyl-functionalized silica gel (Sil-Cl) to yield Sil-Cl/MnPY (Y = 1, 2, 3) materials, and (2) by electrostatic immobilization of the three Mn(iii) meso-tetrakis(N-methylpyridinium-2, 3, or 4-yl)porphyrin isomers (MnPY, Y = 4, 5, 6) on non-modified silica gel (SiO2) to yield SiO2/MnPY (Y = 4, 5, 6) materials. Silica gel used was of column chromatography grade and Mn porphyrin loadings were deliberately kept at a low level (0.3% w/w). These resulting materials were explored as catalysts for iodosylbenzene (PhIO) oxidation of cyclohexane, n-heptane, and adamantane to yield the corresponding alcohols and ketones; the oxidation of cyclohexanol to cyclohexanone was also investigated. The heterogenized catalysts exhibited higher efficiency and selectivity than the corresponding Mn porphyrins under homogeneous conditions. Recycling studies were consistent with low leaching/destruction of the supported Mn porphyrins. The Sil-Cl/MnPY catalysts were more efficient and more selective than SiO2/MnPY ones; alcohol selectivity may be associated with hydrophobic silica surface modification reminiscent of biological cytochrome P450 oxidations. The use of widespread, column chromatography, amorphous silica yielded Sil-Cl/MnPY or SiO2/MnPY catalysts considerably more efficient than the corresponding, previously reported materials with mesoporous Santa Barbara Amorphous No 15 (SBA-15) silica. Among the materials studied, in situ derivatization of Mn(iii) 2-N-pyridylporphyrin by covalent immobilization on Sil-Cl to yield Sil-Cl/MnP1 showed the best catalytic performance with high stability against oxidative destruction and reusability/recyclability.

Instant and quantitative epoxidation of styrene under ambient conditions over a nickel(ii)dibenzotetramethyltetraaza[14]annulene complex immobilized on amino-functionalized SBA-15

Nickel(ii)dibenzotetramethyltetraaza[14]annulene complex (Nitmtaa) was synthetized and immobilized on post amino-functionalized SBA-15 (N-SBA-15) to obtain a stable and reusable nanocatalyst named as Nitmtaa@N-SBA-15. Here (3-aminopropyl)triethoxysilane (APTES) was first grafted on the surface SBA-15, then Nitmtaa was added and coordinated on the silica surface via APTES amine groups. The structure and morphology, and thermal stability of the prepared nanocatalyst was investigated using SEM, HR-TEM, BET, FT-IR, powder XRD, and TGA. HR-TEM and XRD results revealed a high dispersion of Nitmtaa on the SBA-15 surface. The catalytic activity of this nanocatalyst was evaluated in the epoxidation of styrene, under ambient conditions, using meta-chloroperoxybenzoic acid (m-CPBA) as the oxygen donor. This nanocatalyst showed an immediate and quantitative epoxidation of styrene with high turn-over-frequency ∼31.58 s⁻¹. Moreover, the superior catalytic activity and high stability of Nitmtaa@N-SBA-15 could be maintained after four successive cycles. A possible reaction mechanism is also proposed.

Immediate and quantitative epoxidation of styrene under ambient conditions catalyzed by new nanocatalyst obtained by immobilizing nickel(ii)dibenzotetramethyltetraaza[14]annulene in amino-functionalized SBA-15.

Nickel(ii)dibenzotetramethyltetraaza[14]annulene complex immobilized on amino-functionalized TUD-1: an efficient catalyst for immediate and quantitative epoxidation of cyclohexene under ambient conditions

Nickel(ii)dibenzotetramethyltetraaza[14]annulene complex immobilized on amino-functionalized TUD-1 as a new nanocatalyst for spontaneous and quantitative epoxidation of cyclohexene under ambient conditions.

Ozonation of pentabromophenol in aqueous basic medium: Kinetics, pathways, mechanism, dimerization and toxicity assessment

Ozonation has been identified effective technique to degrade phenolic compounds, and production of intermediate dimers are major threat. In this study, we systematically investigated the degradation of Pentabromophenol (PBP) in an aqueous medium by using two different ozone generators (sources: air and water). We studied various factors that influenced the degradation kinetics of PBP, including the pH (7.0, 8.0, and 9.0), humic acid (HA) and anions (Cl^-, SO₄^2-, NO₃^-, and HCO₃^-). PBP was efficiently degraded within 5 min (O₃ source: water) and 45 min (O₃ source: air) at pH 8.0 maintained by phosphate buffer. Reaction kinetics revealed 17 b y-products with five possible pathways, including dimers with their isomers and lower bromophenols. Furthermore, the frontier molecular orbital theory was employed to confirm the proposed ozonation pathways, including the breakage of the CO bond at C₅ and C₄ positions, and the cleavage of the CC bond at C₃ and C₆ position. Product P5, P14 (hydroxyl-nonabromophenyl ether) and P15 (dihydroxyl-octabromophenyl ether) were identified with isomers. Ecological Structure Activity Relationships toxicity assessment resulted into the conversion of highly toxic PBP (acute toxicity: LC₅₀ = 0.11 mg L^-1 for fish, LC₅₀ = 0.124 mg L^-1 for daphnia, and EC₅₀ = 0.118 mg L^-1 for green algae) to less harmful products aside from dimers. P14 (acute toxicity: LC₅₀ = 1.04 × 10⁵) found to be more toxic as compare to PBP. From these findings, we concluded that ozonation is an effective and ideal process for PBP degradation.

Recent advances in metalloporphyrins for environmental and energy applications

Porphyrin-based chemistry has reached an unprecedented period of rapid development after decades of study. Due to attractive multifunctional properties, porphyrins and their analogues have emerged as multifunctional organometals for environmental and energy purposes. In particular, pioneer works have been conducted to explore their application in pollution abatement, energy conversion and storage and molecule recognition. This review summarizes recent advances of porphyrins chemistry, focusing on elucidating the nature of catalytic process. The Fenton-like redox chemistry and photo-excitability of porphyrins and their analogues are discussed, highlighting the generation of high-valent iron oxo porphyrin species. Finally, challenges in current research are identified and perspectives for future development in this area are presented.

The synthesis, characterization and catalytic application of manganese porphyrins bonded to novel modified SBA-15

In the presented research, a highly ordered mesoporous silica material (SBA-15) was functionalized with imidazole as a functionalizing reagent (SBA-TMSIm) and then characterized via FT-IR spectroscopy, thermogravimetric analysis (TGA), powder X-ray diffraction (XRD) and nitrogen adsorption/desorption isotherms.

Vapour phase hydrogenation of phenol over rhodium on SBA-15 and SBA-16

In the present work, mesoporous SBA-15 and SBA-16 were synthesised using classical methods, and their physicochemical properties were investigated by X-ray diffraction (XRD), FTIR, TEM and N2 adsorption-desorption. Rhodium (Rh, 1 wt %) was loaded on the mesoporous SBA-15 and SBA-16 by an impregnation method. The Rh surface coverage, dispersion and crystallite size were determined by room temperature H2 chemisorption on reduced samples. The catalytic activity of Rh supported on mesoporous SBA-15 and SBA-16 was evaluated for the first time in the hydrogenation of phenol in vapour phase in a temperature range between 130 and 270 °C at atmospheric pressure. The reaction over Rh/SBA-15 at 180 °C produced cyclohexanone as the major product (about 60%) along with lower amounts of cyclohexanol (about 35%) and cyclohexane (about 15%). The influences of temperature, H2/phenol ratio, contact time and the nature of the solvent on the catalytic performance were systematically investigated. The Rh/SBA-16 system offered lower phenol conversion compared to Rh/SBA-15, but both have a very high selectivity for cyclohexanone (above 60%).