Heterogeneous catalytic ozonation of phenacetin in water using magnetic spinel ferrite as catalyst: Comparison of surface property and efficiency

Ferromanganese oxide-functionalized TiO2 for rapid catalytic ozonation of PPCPs through a coordinated oxidation process with adjusted composition and strengthened generation of reactive oxygen species

Ferromanganese oxide (MFOx) was first utilized to functionalize TiO2 and an MFOx@TiO2 catalyst was developed for catalytic ozonation for rapid attack of pharmaceutical and personal care products (PPCPs) with adjusted reactive oxygen species (ROSs) composition and strengthened ROSs generation. Unlike Al2O3, which strongly relied on adsorption and was significantly influenced by MFOx loading, synergistic catalytical effects of MFOx and TiO2 were observed, and optimal MFOx doping of 2 wt% and MFOx@TiO2 dosage of 500 ppm were obtained for catalyzing ozonation. In ibuprofen (IBP) degradation, MFOx@TiO2-catalyzed ozonation (MFOx@TiO2/O3) obtained 2.0-, 4.7- and 6.9-folds the kobs of TiO2/O3, MFOx/O3 and bare ozonation (B/O3). Stronger O3 decomposition was observed by MFOx@TiO2 over bare TiO2 with the participation of redox pairs Fe(II)/Fe(III) and Mn(II)/Mn(III)/Mn(IV) and increased surface oxygen vacancies (SOVs) from 9.8 % to 33.7 % was detected. The results revealed that Fe(II), Mn(II) and Mn(III) with low valance accelerated Ti(III) generation from Ti(VI), obtaining an unprecedented high Ti(III) composition occupying 35.3 % of the total Ti atoms. Ti(III) catalyzed the direct reduction of SOVs-O2 to •O2-, and it accelerated the formation of Ti(VI)-OH and Ti(VI)-O which catalyzed O3 decomposition into •O2-. •O2- was found to primarily initiate IBP degradation with nucleophilic addition and dominated over 66 % IBP removal. The enhanced •O2- generation further strengthened •OH and 1O2 production. MFOx@TiO2/O3 obtained 17 %, 21 % and 30 % higher TOC removal over TiO2/O3, MFOx/O3 and B/O3, respectively. Acute toxicity tests confirmed the effective toxicity control of organics by MFOx@TiO2/O3 process (inhibition rate: 10.9 %). Degradation test of atenolol and sulfamethoxazole confirmed the catalytic effects of MFOx@TiO2. MFOx@TiO2 performed strong resistance to water matrix in application test and showed good stability and reusability. The study proposed an effective catalyst for strengthening the ozonation process on PPCPs degradation and provided an in-depth understanding of the mechanisms and characteristics of the MFOx@TiO2 catalyst and MFOx@TiO2/O3 process.

Performance of alkali and Cu-modified ZSM-5 during catalytic ozonation of polyvinyl alcohol in aqueous solution

A novel hierarchical Cu/ZSM-5 was prepared over alkaline treatment and incipient wet impregnation method for the catalytic ozonation of polyvinyl alcohol (PVA). Under the optimum preparation conditions, hierarchical Cu/ZSM-5 exhibited an excellent mineralization performance during the PVA degradation process, and the removal rate of TOC after 60 min of reaction was 47.86%, much higher than that of ozonation alone (5.40%). Its high catalytic activity could attribute to the large pore volume (0.27 cm³/g) and pore size (6.51 nm) which are beneficial for the distribution of loaded copper and adsorption performance for PVA. Compared to ·OH, ¹O₂ (2.66 times in 10 min) contributed more to the removal of PVA. The degradation of PVA was a combined process of direct ozone oxidation, catalytic ozonation and adsorption. With its high catalytic performance and stability, hierarchical Cu/ZSM-5 has a very broad application prospect in the process of catalytic ozonation of refractory pollutants.

Mechanisms of interfacial catalysis and mass transfer in a flow-through electro-peroxone process

To investigate the catalytic mechanism and mass transfer efficiency in the removal of amitriptyline using an electro-peroxide process, a CuFe₂O₄-modified carbon cloth cathode was prepared and utilized in a reaction unit. The results demonstrated a remarkable efficacy of the system, achieving 91.0% amitriptyline removal, 68.3% mineralization, 41.2% mineralization current efficiency, and 0.24 kWh/m³ energy consumption within just five minutes of treatment. The study revealed that the exposed Fe atoms of the ferrite nanoparticles, with a size of 22.7 nm and 89.7% crystallinity, functioned as mediators to bind the adsorbed O atoms. The 3d_xy, 3d_xz, and 3d²_z orbitals of Fe atoms interacted with the 2p_z orbital of O atoms of H₂O₂ and O₃ to form σ and π bonds, facilitating the adsorption-activation of H₂O₂ and O₃ into hydroxyl radicals. These hydroxyl radicals (∼ 1.15 × 10¹³ mol/L) were distributed at the cathode-solution interface and rapidly consumed along the direction of liquid flow. The flow-through cathode design improved the mass transfer of aqueous O₃ and in-situ generated H₂O₂, leading to an increased yield of hydroxyl radicals, as well as the contact time and space between hydroxyl radicals and amitriptyline. Ultimately, this resulted in a higher degradation efficiency of the system.

Acid-washed zero-valent aluminum as a highly efficient persulfate activator for degradation of phenacetin

Phenacetin (PNT) is one of the most frequently detected nonsteroidal anti-inflammatory drugs in the water ecosystems, which poses a potential risk to environmental aquatic organisms. Acid-washed zero-valent aluminum (ZVAl) as a highly efficient activator for persulfate (PS) process was investigated to degrade PNT from the aqueous solution. The results indicated that acid-washed pretreatment for ZVAl could efficiently increase the degradation efficiency of PNT in the PS treatment. The degradation efficiency of PNT (50 μM) was up to 90% in 4 hours with the addition of 0.2 g/L acid-washed ZVAl and 8 mM PS at pH 6.8 and 25 °C. The PNT degradation followed pseudo-first order kinetics in the present system. High activator dosage, PS concentration, and reaction temperature could enhance the PNT degradation. The presence of inorganic anions (i.e., NO₃^-, HCO₃^-) and humic acid (HA) showed inhibitory effects on the PNT degradation. The reuse results illustrated the acid-washed ZVAl material would have continuous and efficient activation performance for PS to degrade the PNT. Radical scavenger experiments and electron paramagnetic resonance indicated that both SO₄^•- and •OH were major reactive species during the PNT degradation. The possible degradation pathways of PNT mainly included the break of C-N and C-O bonds and further oxidation.

Development, dilemma and potential strategies for the application of nanocatalysts in wastewater catalytic ozonation: A review

With the continuous development of nanomaterials in recent years, the application of nanocatalysts in catalytic ozone oxidation has attracted more and more researchers' attention due to their excellent catalytic properties. In this review, we systematically summarized the current research status of nanocatalysts mainly involving material categories, mechanisms and catalytic efficiency. Based on summary and analysis, we found most of the reported nanocatalysts were in the stage of laboratory research, which was caused by the nanocatalysts defects such as easy aggregation, difficult separation, and easy leakage. These defects might result in severe resource waste, economic loss and potentially adverse effects imposed on the ecosystem and human health. Aiming at solving these defects, we further analyzed the reasons and the existing reports, and revealed that coupling nano-catalyst and membrane, supported nanocatalysts and magnetic nanocatalysts had promising potential in solving these problems and promoting the actual application of nanocatalysts in wastewater treatment. Furthermore, the advantages, shortages and our perspectives of these methods are summarized and discussed.

Degradation of pyrene in contaminated soil by the dielectric barrier discharge combined with the MnFe2O4 catalyst

In this work, a spinel oxide of MnFe2O4 was used as the dielectric barrier discharge (DBD) catalyst for the remediation of pyrene-contaminated soil. The performances were investigated through tuning voltage, frequency, catalyst dosage, and soil moisture. Under the optimal conditions, such as the voltage of 10.0 kV, the discharge frequency of 1.0 kHz, MnFe2O4 dosage of 0.3 g, air flow rate of 2.0 L min-1, soil humidity of 5.3%, and degradation efficiency of DBD/MnFe2O4 for pyrene could reach 79.26% after 10 min treatment, which was much higher than that of DBD for pyrene of 42.56%. The DBD/MnFe2O4 system also showed the high degradation efficiency of other pollutants including phenanthrene, p-nitrophenol, and p-nitrophenol in contaminated soil. The enhancing mechanism of the DBD/MnFe2O4 system was discussed.

Ni-based catalysts used in heterogeneous catalytic ozonation for organic pollutant degradation: a minireview

Among various advanced oxidation processes for wastewater treatment, heterogeneous catalytic ozonation (HCO) has a growing interest in pollutant degradation, e.g., pesticides, pharmaceuticals, cresols, detergents, polymers, dyes, and others. Direct oxidation with ozone can occur by this route or indirectly, generating reactive oxygen species through the catalytic activation of the ozone molecule. Then, many catalytic materials were evaluated, such as unsupported and supported oxides, activated carbon, nanocarbons, carbon nitride, and mesoporous materials. This review focuses on the properties and performance of Ni-based catalysts (NiO, supported NiO, Ni ferrites, and M-Ni bimetallic), emphasizing the reaction mechanisms and the importance of the reactive oxygen species in removing toxic organic compounds.

Effects of Rhenium Substitution of Co and Fe in Spinel CoFe2O4 Ferrite Nanomaterials

In this work, nanoparticles of Co_1-xRe_xFe₂O₄ and CoFe_2-xRe_xO₄ (0 ≤ x ≤ 0.05) were synthesized by the sol-gel method. The Rietveld refinement analysis of XRD and Raman data revealed that all of the prepared samples were single phase with a cubic spinel-type structure. With the substitution of Re, the lattice parameters were slightly increased, and Raman spectra peak positions corresponding to the movement of the tetrahedral sublattice shifted to a higher energy position. Furthermore, Raman spectra showed the splitting of T_2g mode into branches, indicating the presence of different cations at crystallographic A- and B-sites. The SEM micrograph confirms that surface Re exchange changes the coordination environment of metals and induces Fe-site structure distortion, thereby revealing more active sites for reactions and indicating the bulk sample's porous and agglomerated morphology. The vibrating sample magnetometer (VSM) results demonstrated that the synthesized nanoparticles of all samples were ferromagnetic across the entire temperature range of 300-4 K. The estimated magnetic parameters, such as the saturation magnetization, remanent magnetization, coercivity, blocking temperature (T_B), and magnetic anisotropy, were found to reduce for the Co-site doping with the increasing doping ratio of Re, while in the Fe site, they enhanced with the increasing doping ratio. The ZFC-FC magnetization curve revealed the presence of spin-glass-like behavior due to the strong dipole-dipole interactions in these ferrite nanoparticles over the whole temperature range. Finally, the dielectric constant (ε_r') and dielectric loss (tanδ) were sharply enhanced at low frequencies, while the AC conductivity increased at high frequencies. The sharp increases at high temperatures are explained by enhancing the barrier for charge mobility at grain boundaries, suggesting that samples were highly resistive. Interestingly, these parameters (ε_r', tanδ) were found to be higher for the Fe-site doping with the increasing Re doping ratio compared with the Co site.

Heterogeneous Catalysis of Ozone Using Iron–Manganese Silicate for Degradation of Acrylic Acid

Iron–manganese silicate (IMS) was synthesized by chemical coprecipitation and used as a catalyst for ozonating acrylic acid (AA) in semicontinuous flow mode. The Fe-O-Mn bond, Fe-Si, and Mn-Si binary oxide were formed in IMS on the basis of the results of XRD, FTIR, and XPS analysis. The removal efficiency of AA was highest in the IMS catalytic ozonation processes (98.9% in 15 min) compared with ozonation alone (62.7%), iron silicate (IS) catalytic ozonation (95.6%), and manganese silicate catalytic ozonation (94.8%). Meanwhile, the removal efficiencies of total organic carbon (TOC) were also improved in the IMS catalytic ozonation processes. The IMS showed high stability and ozone utilization. Additionally, H2O2 was formed in the process of IMS catalytic ozonation. Electron paramagnetic resonance (EPR) analysis and radical scavenger experiments confirmed that hydroxyl radicals (•OH) were the dominant oxidants. Cl−, HCO3−, PO43−, Ca2+, and Mg2+ in aqueous solution could adversely affect AA degradation. In the IMS catalytic ozonation of AA, the surface hydroxyl groups and Lewis acid sites played an important role.

Catalytic ozonation oxidation of ketoprofen by peanut shell-based biochar: effects of the pyrolysis temperatures

A series of peanut shell (HS)-based biochar were prepared at different pyrolysis temperatures and subsequently used as the effective ozonation catalysts for ketoprofen (KET) degradation in aqueous solution. The physicochemical properties and morphology of the obtained biochar were analysed by ICP, TG, XRD, FT-IR, SEM, TEM, BET and etc. characterizations. The results demonstrated that the pyrolysis temperature played an important role on the structure and morphology of HS-based biochar. As the pyrolysis temperature increased, the cellulose and hemicellulose of HS gradually decomposed, resulting in the loss of biochar mass, improvement of the surface roughness, the increase of specific surface area, and the formation of new functional groups. The HS-based biochar pyrolyzed at 600°C (HS600) achieved the fast KET degradation rate with the pseudo-first-order rate constant of 0.922 min^-1 and the low adsorption rate of 1.3% in O₃/HS600 process. Meanwhile, the effects of the HS600 dosage, initial KET concentration, temperature, water matrix, and solution pH on KET degradation were systematically evaluated. Besides, the HS600 displayed great stability and reusability towards KET degradation during multiple cycling experiments. Moreover, the single oxygen, superoxide radical and hydroxyl radical were involved in O₃/HS600 process and the mechanisms for the improvement of KET degradation were also elucidated. It could be speculated that the enhancement of the catalytic ozonation by HS-based biochar was probably attributed to the increased active sites and the intense chemical bonds, and delocalized π electron.

Catalytic ozonation of dibutyl phthalate in the presence of Ag-doped NiFe2O4 and its mechanism

In this study, NiFe₂O₄ and Ag_0.1Ni_0.95Fe₂O₄ were successfully prepared by the sol-gel method and applied to catalyze ozone for dibutyl phthalate (DBP) degrading. The synthesized catalysts were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, and vibrating sample magnetometer. The removal efficiency was compared with different catalyst dosage, pH condition, and initial DBP concentration for the two catalysts. The results showed that the introduction of Ag_0.1Ni_0.95Fe₂O₄ enhanced the ozone decomposition and the utilization efficiency of ozone from 32.2% (ozone alone) to 56.5% and improved the degradation efficiency of DBP significantly. The two catalysts both presented good recycling performance. Furthermore, the scavenger test displayed DBP degradation by catalytic ozonation dominated by OH in this study. These insights into the catalytic ozonation mechanism on Ag_0.1Ni_0.95Fe₂O₄ will advance their practical application to the catalytic degradation of organic pollutants.

Soil physicochemical (colloidal) properties affected by ozonated water and organic fertilization

More has to be investigated on the use of ozonated water (O3) for the improvement of growth medium properties. Accordingly, the objective was to examine the effects of O3 (control, 0.5, 1.0, and 2.0 mg L-¹) on soil physicochemical (colloidal) properties using organic fertilization (manure), under non-planted or planted conditions. Different soil physicochemical (colloidal) properties including soil available water (SAW), aggregate stability, soil porosity, pH, salinity (EC), organic carbon (SOC), CaCO₃, and cation exchange capacity (CEC) were determined. The experimental treatments and their interactions significantly (P ≤ 0.05) affected soil physicochemical properties including SAW (4.17-10.98%), aggregate stability and porosity (7.77-57.37%), SOC (0.15-2.09%), and CEC (17.68-42.75 Cmol( +)/kg). Interestingly, the single use of O3 or in combination with manure significantly decreased EC. Although O3 significantly decreased SOC in non-planted soils, it significantly increased SOC in planted soils. O3 may enhance soil physicochemical (colloidal) properties, and if combined with manure in a planted soil, such positive effects may be further enhanced.

A magnetic-void-porous MnFe2O4/carbon microspheres nano-catalyst for catalytic ozonation: Preparation, performance and mechanism

Wastewater treatment is essential to guarantee human health and ecological security. Catalytic ozonation with nanocatalysts is a widely studied and efficient treatment technology. However, this method has always been limited by nanocatalysts disadvantages such as easily loss, difficult to separate and reuse, and catalytic ability decay caused by aggregation, which could cause severe resources waste and potential risk to human health and ecosystem. To remedy these challenges, a magnetic-void-porous MnFe₂O₄/carbon microsphere shell nanocatalyst (CMS-MnFe₂O₄) was successfully synthesized using renewable natural microalgae. The separation test showed CMS-MnFe₂O₄ was rapidly separated within 2 min under an external magnetic field. In catalytic ozonation of oxalic acid (OA), CMS-MnFe₂O₄ showed efficient and stable catalytic efficiency, reaching a maximum total organic carbon removal efficiency of 96.59 % and maintained a 93.88 % efficiency after 4 cycles. The stable catalytic efficiency was due to the supporting effects of the carbon microsphere shell, which significantly enhanced CMS-MnFe₂O₄ chemical stability and reduced the metal ions leaching to 10-20 % of MnFe₂O₄ through electron transfer. To explore the catalytic mechanism, radical experiments were conducted and a new degradation pathway of OA involving superoxide anions rather than hydroxyl radicals was proposed. Consequently, this study suggests that an efficient, recyclable, stable, and durable catalyst for catalytic ozonation could be prepared.

Ozonation catalysed by ferrosilicon for the degradation of ibuprofen in water

The search for optimal catalysts to improve the working efficiency of ozonation has always been an important issue in the research field of advanced oxidation processes. In this study, a novel catalyst, ferrosilicon, was selected as the catalyst in heterogeneous catalytic ozonation to degrade ibuprofen (IBP) in water and treat real pharmaceutical wastewater. During the procedure, 45^#ferrosilicon exhibited the best catalytic activity. Under the optimized experimental conditions, the IBP removal reached 75%, which was a great improvement compared to the 37% removal by ozone alone. The 45^#-ferrosilicon-catalysed ozonation also achieved 68% TOC removal for real pharmaceutical wastewater, which was 31% higher than that by ozone alone. The degradation pathway of IBP was proposed using GC/MS. The EPR test proved that the main active species in the system were free active radicals •OH, and the measured accumulative •OH amount was 102 μmol. The characterization results show that the nascent metallic oxides, hydroxides, and hydroxyoxides on the ferrosilicon surface facilitated the decomposition of ozone molecules and generation of free active radicals. The removal of target organic contaminants in the water was mainly attributed to the oxidization of these highly active species.

Theoretical investigation on the contribution of HO, SO4- and CO3- radicals to the degradation of phenacetin in water: Mechanisms, kinetics, and toxicity evaluation

Indirect oxidation induced by reactive free radicals, such as hydroxyl radical (HO), sulfate radical (SO₄^-) and carbonate radical (CO₃^-), plays an important or even crucial role in the degradation of micropollutants. Thus, the coadjutant degradation of phenacetin (PNT) by HO, SO₄^- and CO₃^-, as well as the synergistic effect of O₂ on HO and HO₂ were studied through mechanism, kinetics and toxicity evaluation. The results showed that the degradation of PNT was mainly caused by radical adduct formation (RAF) reaction (69% for Г, the same as below) and H atom transfer (HAT) reaction (31%) of HO. For the two inorganic anionic radicals, SO₄^- initiated PNT degradation by sequential radical addition-elimination (SRAE; 55%), HAT (28%) and single electron transfer (SET; 17%) reactions, while only by HAT reaction for CO₃^-. The total initial reaction rate constants of PNT by three radicals were in the order: SO₄^- > HO > CO₃^-. The kinetics of PNT degradation simulated by Kintecus program showed that UV/persulfate could degrade target compound more effectively than UV/H₂O₂ in ultrapure water. In the subsequent reaction of PNT with O₂, HO and HO₂, the formation of mono/di/tri-hydroxyl substitutions and unsaturated aldehydes/ketones/alcohols were confirmed. The results of toxicity assessment showed that the acute and chronic toxicity of most products to fish increased and to daphnia decreased, and acute toxicity to green algae decreased while chronic toxicity increased.

Iron foam combined ozonation for enhanced treatment of pharmaceutical wastewater

In this study, iron foam combined ozonation was employed as an advanced oxidation process to treat the organic contaminants in real pharmaceutical wastewater. It was found that this procedure worked well in a wide range of pH, the existence of iron foam in ozonation system markedly elevated the mineralization level of organic contaminants. Within the reaction time of 120 min, iron foam combined ozonation achieved 53% of DOC removal percentage, which was 21% higher than that of ozone alone. Meanwhile, the biodegradability of the pharmaceutical wastewater was improved, a large part of the organic pollutants containing benzene rings and amino groups were effectively degraded, and a certain amount of phosphate and nitrogen also get removed. In iron foam combined ozonation, zero valent iron played the role as an activator. It was oxidized into iron oxides and oxyhydroxides, the electrons transferring among different valences of iron stimulated the decomposition of ozone and the generation of hydroxyl radicals, which accounted for most of the organic contaminants degradation.

Effective mineralization of quinoline and bio-treated coking wastewater by catalytic ozonation using CuFe2O4/Sepiolite catalyst: Efficiency and mechanism

In this study, CuFe₂O₄ nanocomposite loaded on natural sepiolite (CuFe₂O₄/SEP) was prepared by the citrate sol-gel method. CuFe₂O₄/SEP was characterized by X-ray diffraction, Brunauer-Emmett-Teller adsorption analysis, scanning electron microscopy, and energy dispersive spectroscopy. The CuFe₂O₄/SEP composite was stable and showed an excellent catalytic activity for ozonation. The efficiency of quinoline mineralization in the catalytic ozonation with CuFe₂O₄/SEP was 90.3%, and this value was 5.4 times higher than that of the uncatalyzed ozonation (16.8%). The quinoline mineralization followed a pseudo first-order kinetics with all the catalysts. The rate constant for the mineralization of quinoline by ozonation in the presence of CuFe₂O₄/SEP was 0.0885 min^-1, which was 16.7 times higher than that in ozone alone (0.0053 min^-1). Radical scavenging tests revealed that hydroxyl radical (OH) and superoxide radical (O₂^-) were the reactive oxygen species (ROS) in the quinoline degradation. In the presence of CuFe₂O₄/SEP, ozone and hydrogen peroxide were rapidly converted into the ROS. Although neutral and alkaline pH were more beneficial for the quinoline mineralization, CuFe₂O₄/SEP exhibited significant catalytic activity even under acidic conditions. Meanwhile, five-cycle successive tests suggested that CuFe₂O₄/SEP was recyclable and hence, stable. Furthermore, the feasibility of the catalytic ozonation for the treatment of biologically treated coking wastewater was evaluated. The catalytic ozonation resulted in 57.81% total organic carbon removal efficiency at 60 min, which was 2.9 times higher than that in the uncatalyzed ozonation (19.99%).

Insights into Heteroatom-Doped Graphene for Catalytic Ozonation: Active Centers, Reactive Oxygen Species Evolution, and Catalytic Mechanism

To guide the design of novel graphene-based catalysts in catalytic ozonation for micropollutant degradation, the mechanism of catalytic ozonation with heteroatom-doped graphene was clarified. Reduced graphene oxide doped with nitrogen, phosphorus, boron, and sulfur atoms (N-, P-, B-, and S-rGO) were synthesized, and their catalytic ozonation performances were evaluated in the degradation of refractory organics and bromate elimination simultaneously. Doping with heteroatoms, except sulfur, significantly improved the catalytic ozonation activity of graphene. Introducing sulfur atoms destroyed the stability of graphene during ozonation, with the observed partial performance improvement caused by surface adsorption. Degradation pathways for selected refractory organics were proposed based on the intermediates identified using high-resolution Orbitrap mass spectroscopy and gas chromatographic-mass spectroscopy. Three and six new unopened intermediates were identified in benzotriazole and p-chlorobenzoic acid degradation, respectively. Roles of chemical functional groups, doped atoms, free electron, and delocalized π electron of heteroatom-doped graphene in catalytic ozonation were identified, and contributions of these active centers to the formation of reactive oxygen species (ROS), including hydroxyl radicals, superoxide radicals, singlet oxygen, and H₂O₂, were evaluated. A mechanism for catalytic ozonation by heteroatom-doped graphene was proposed for the first time.

Spiderweb-Like Fe-Co Prussian Blue Analogue Nanofibers as Efficient Catalyst for Bisphenol-A Degradation by Activating Peroxymonosulfate

Prussian blue and its analogues (PBA) based nanomaterials have been widely applied to removing pollutants in the recent years. However, easy aggregation and poor recycling largely limit their practical applications. In this work, spiderweb-like Fe-Co Prussian blue analogue/polyacrylonitrile (FCPBA/PAN) nanofibers were prepared by electrospinning and applied to degrading bisphenol-A (BPA) by activating peroxymonosulfate (PMS). Detailed characterization demonstrated that a high loading of FCPBA (86% of FCPBA in FCPBA/PAN) was successfully fixed on the PAN nanofibers. 67% of BPA was removed within 240 min when 500 mg·L⁻¹ PMS and 233 mg·L⁻¹ FCPBA/PAN were introduced in 20 mg·L⁻¹ BPA solution at initial pH of 2.8. Electron paramagnetic resonance (EPR) and radical inhibition experiments were performed to identify the possible degradation mechanism. For comparison, a low loading of FCPBA nanofibers (0.6FCPBA/PAN nanofibers, 43% of FCPBA in FCPBA/PAN) were also prepared and tested the catalytic performance. The results showed that the activity of FCPBA/PAN was much higher than 0.6FCPBA/PAN. Furthermore, a FCPBA/PAN packed column was made as a reactor to demonstrate the reusability and stability of FCPBA/PAN nanofibers, which also exhibited the bright future for the industrial application. This work makes it possible to fabricate efficient PBA nanocatalysts with excellent recyclability and promotes the application of PBA in industrial areas.

Enhanced ozonation degradation of atrazine in the presence of nano-ZnO: Performance, kinetics and effects

Enhanced ozonation degradation of atrazine (ATZ) with nano-ZnO (nZnO) as catalyst and the influences of the operational parameters have been investigated through semi-continuous experiments in this study. The results demonstrated that the combination of ozone (O₃) and nZnO showed an obvious synergetic effect and the ATZ degradation conformed to pseudo-first-order kinetics. An improvement of ATZ degradation efficiency by 41.8% and pseudo-first-order rate constant by more than a factor of four was obtained in the O₃/nZnO process after 5min of reaction compared to O₃ alone. Meanwhile, the degradation efficiency of ATZ was gradually enhanced with increasing nZnO dosage and initial pH in the range from 3.0 to 8.0, and a higher amount of ATZ was degraded when the initial concentration of ATZ rose from 0.5 to 5mg/L. Additionally, sulfate ion, chloride ion, nitrate ion and low concentrations of humic acid substances led to enhancement of the ATZ degradation. The notable decrease of ATZ removal efficiency observed in the presence of radical scavengers and the results of free radical tests indicated that OH is the dominant active radical species. The mechanism investigation demonstrated that the enhancement effect could be attributed to the introduction of nZnO, which could promote the utilization of O₃, enhance the formation of superoxide radical, and further accelerate the production of hydrogen peroxide and the generation of OH/O₂^-.

Cerium doped red mud catalytic ozonation for bezafibrate degradation in wastewater: Efficiency, intermediates, and toxicity

In this study, the performance of bezafibrate (BZF) degradation and detoxification in the aqueous phase using cerium-modified red mud (RM) catalysts prepared using different cerium sources and synthesis methods were evaluated. Experimental results showed that the surface cerium modification was responsible for the development of the catalytic activity of RM and this was influenced by the cerium source and the synthesis method. Catalyst prepared from cerium (IV) by precipitation was found to show the best catalytic activity in BZF degradation and detoxification. Reactive oxygen species including peroxides, hydroxyl radicals, and super oxide ions were identified in all reactions and we proposed the corresponding catalytic reaction mechanism for each catalyst that prepared from different cerium source and method. This was supported by the intermediates profiles that were generated upon BZF degradation. The surface and the structural properties of cerium-modified RM were characterized in detail by several analytical methods. Two interesting findings were made: (1) the surface texture (specific surface area and mesoporous volume) influenced the catalytic reaction pathway; and (2) Ce(III) species and oxygen vacancies were generated on the surface of the catalyst after cerium modification. This plays an important role in the development of the catalytic activity.

Production of clinoptilolite nanorods by glow discharge plasma technique for heterogeneous catalytic ozonation of nalidixic acid

This study investigates nalidixic acid degradationviaheterogeneous catalytic ozonation using clinoptilolite nanorods (CNs) as a novel nanocatalyst.

˙OH-initiated heterogeneous oxidation of methyl orange using an Fe–Ce/MCM-41 catalyst

Surface-bound ˙OH radicals play a dominant role in the oxidation of methyl orange.