Improved photocatalytic activity and durability of AgTaO3/AgBr heterojunction: The relevance of phase and electronic structure

Boosting the photocatalytic properties of NaTaO3 by coupling with AgBr

AgBr/NaTaO3 composites, with different molar % of NaTaO3 (Br/NTO(X%)), have been synthesized by simple precipitation methods; bare NaTaO3 was synthesized by hydrothermal procedure, while AgBr was synthesized by a precipitation procedure using cetyl-tri-methyl-ammonium bromide (CTAB) and AgNO3. Samples have been characterized by X-ray diffraction (XRD), N2 adsorption, UV–vis diffuse reflectance spectroscopy (DRS), Fourier-transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Photocatalytic activity of the as-prepared photo-catalysts was evaluated through photocatalytic degradation of rhodamine B (RhB), methyl orange (MO) and caffeic acid (CAFA) under UV and visible illumination. Single AgBr material and Br/NTO(X%) composites displayed the ability to absorb light in the visible region, while NaTaO3 is only photoactive under UV irradiation. Based on the position of conduction and valence bands of AgBr and NaTaO3, the heterojunction between these two photo-catalysts corresponds to a type II junction. In the case of photocatalytic degradation of RhB and CAFA, Br/NTO(x%) composites have highest photocatalytic activity than that obtained by both parental materials under the same operational conditions. AgBr and Br/NTO(x%) composites achieve a fast degradation of MO, together with a considerable adsorption capacity, attributed to the presence of a remaining amount of residual CTAB on the AgBr surface. In summary, coupling AgBr with NaTaO3 improves the photocatalytic activity under both UV and visible illumination with respect to the parental components, but the performance of the composites is highly dependent on the type of substrate to be degraded and the illumination conditions.

Hybrid Plasmonic Nanomaterials for Hydrogen Generation and Carbon Dioxide Reduction

The successful development of artificial photosynthesis requires finding new materials able to efficiently harvest sunlight and catalyze hydrogen generation and carbon dioxide reduction reactions. Plasmonic nanoparticles are promising candidates for these tasks, due to their ability to confine solar energy into molecular regions. Here, we review recent developments in hybrid plasmonic photocatalysis, including the combination of plasmonic nanomaterials with catalytic metals, semiconductors, perovskites, 2D materials, metal-organic frameworks, and electrochemical cells. We perform a quantitative comparison of the demonstrated activity and selectivity of these materials for solar fuel generation in the liquid phase. In this way, we critically assess the state-of-the-art of hybrid plasmonic photocatalysts for solar fuel production, allowing its benchmarking against other existing heterogeneous catalysts. Our analysis allows the identification of the best performing plasmonic systems, useful to design a new generation of plasmonic catalysts.

Fabrication of ILs-Assisted AgTaO3 Nanoparticles for the Water Splitting Reaction: The Effect of ILs on Morphology and Photoactivity

The design of an active, stable and efficient photocatalyst that is able to be used for hydrogen production is of great interest nowadays. Therefore, four methods of AgTaO3 perovskite synthesis, such as hydrothermal, solvothermal, sol-gel and solid state reactions, were proposed in this study to identify the one with the highest hydrogen generation efficiency by the water splitting reaction. The comprehensive results clearly show that the solid state reaction (SSR) led to the obtainment of a sample with an almost seven times higher photocatalytic activity than the other methods. Furthermore, four ionic liquids, all possessing nitrogen in the form of organic cations (two imidazoliums with different anions, ammonium and tetrazolium), were used for the first time to prepare composites consisting of AgTaO3 modified with IL and Pt, simultaneously. The effect of the ionic liquids (ILs) and Pt nanoparticles' presence on the structure, morphology, optical properties, elemental composition and the effectiveness of the hydrogen generation was investigated and discussed. The morphology investigation revealed that the AgTaO3 photocatalysts with the application of [OMIM]-cation based ILs created smaller granules (<500 nm), whereas [TBA] [Cl] and [TPTZ] [Cl] ILs caused the formation of larger particles (up to 2 μm). We found that various ILs used for the synthesis did not improve the photocatalytic activity of the obtained samples in comparison with pristine AgTaO3. It was detected that the compound with the highest ability for hydrogen generation under UV-Vis irradiation was the AgTaO3_0.2% Pt (248.5 μmol∙g-1), having an almost 13 times higher efficiency in comparison with the non-modified pristine sample. It is evidenced that the enhanced photocatalytic activity of modified composites originated mainly from the presence of the platinum particles. The mechanism of photocatalytic H2 production under UV-Vis light irradiation in the presence of an AgTaO3_IL_Pt composite in the water splitting reaction was also proposed.

Structural Insight on Defect-Rich Tin Oxide for Smart Band Alignment Engineering and Tunable Visible-Light-Driven Hydrogen Evolution

Herein, a series of defect-rich tin oxides, Sn_xO_y, were synthesized with tunable Sn²⁺/Sn⁴⁺ composition ratio and defect chemistry, aiming to explore the impact of local structural modulation, non-stoichiometric chemistry, and defective center on the modulation of band gap values, band edge potential positions, and photocatalytic hydrogen evolution performance. The phase structure, morphology, surface component, and photoelectric properties were analyzed by multiple testing methods. The modulation of the Sn²⁺/Sn⁴⁺ molar ratio was analyzed by X-ray photoelectron spectroscopy and the spectra of Mossbauer and electron spin resonance, which indicated the existence of interstitial tin and oxygen vacancy, predicting a highly disordered local structure. In addition, the photocatalytic activity was evaluated by water splitting for hydrogen production under visible light. The optimal photocatalytic activity toward H₂ production rate reached 58.6 μmol·g^-1·h^-1 under visible light illumination. However, the photocatalytic activity gradually decreased with an increase of synthetic temperature. Much higher Sn²⁺/Sn⁴⁺ molar ratio in the present defective tin oxide gave rise to more negative band edge potentials for hydrogen production. Meanwhile, the driving force was decreased with the diminished Sn²⁺. Large amounts of hydroxyl groups, Sn²⁺, and relatively negative potential of conduction band in non-stoichiometric Sn_xO_y play critical roles in visible light harvesting and photocatalytic water splitting. Furthermore, the relationships among crystal structure, electronic properties, and photocatalytic activities were clarified by theoretical calculation. This work provides a novel strategy for the development of highly efficient photocatalytst by regulating the internal electronic structure and surface defects.

Perovskite Structure Associated with Precious Metals: Influence on Heterogenous Catalytic Process

The use of perovskite-based materials and their derivatives can have an important role in the heterogeneous catalytic field based on photochemical processes. Photochemical reactions have a great potential to solve environmental damage issues. The presence of precious metals in the perovskite structure (i.e., Ag, Au, or Pt) may improve its efficiency significantly. The precious metal may comprise the perovskite lattice as well as form a heterostructure with it. The efficiency of catalytic materials is directly related to processing conditions. Based on this, this review will address the use of perovskite materials combined with precious metal as well as their processing methods for the use in catalyzed reactions.

Large enhanced photocatalytic activity of g-C3N4 by fabrication of a nanocomposite with introducing upconversion nanocrystal and Ag nanoparticles

A novel heterostructured nanocomposite UCNPs@SiO₂@Ag/g-C₃N₄ was developed for the first time to substantially boost the solar-light driven photocatalytic activity of g-C₃N₄. Its photocatalytic properties and photocatalytic mechanism were investigated. The as-synthesized photocatalyst with excellent improvement in the solar absorption and separation efficiency of photoinduced electron–hole pairs exhibited optimum solar-induced photocatalytic activity in dye degradation and hydrogen production. The experimental results showed that the rates of degradation of Rhodamine B (RhB) and hydrogen evolution were about 10 and 12 times higher than that of pristine g-C₃N₄, respectively. The excellent photocatalytic activity was attributed to the synergetic effect of upconversion nanoparticles (UCNPs) and Ag nanoparticles (NPs) on the modification of the photocatalytic properties of g-C₃N₄, resulting in a broad light response range for g-C₃N₄ as well as the fast separation and slow recombination of photoinduced electron–hole pairs. This study provides new insight into the fabrication of g-C₃N₄-based nanocomposite photocatalysts with high catalytic efficiency through the artful assembly of UCNPs, Ag NPs and g-C₃N₄ into a hetero-composite nanostructure. The prominent improvement in photocatalytic activity enables the potential application of g-C₃N₄ in the photocatalytic degradation of organic pollutants and hydrogen production utilizing solar energy.

A novel heterostructured nanocomposite UCNPs@SiO₂@Ag/g-C₃N₄ was developed for the first time to substantially boost the solar-light driven photocatalytic activity of g-C₃N₄.