Voltammetric determination of 6-mercaptopurine using a multiwall carbon nanotubes paste electrode in the presence of isoprenaline as a mediator

Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

Adsorption of a thione derivative on carbon, AlN, and BN nanotubes: a detailed DFT and MD investigation

The performance of nanotubes (NT) of carbon (CC), aluminium-nitrogen (AlN), and boron-nitrogen (BN) as a sensor and nanocarrier for mercaptopurine (MCP) was investigated by means of a theoretical approach. The calculated negative values of adsorption energy showed the interaction and adsorption of MCP. Highest-occupied molecular orbital (HOMO) and lowest-unoccupied molecular orbital (LUMO) distributions were only found on the NT counter portion of the drug-nanotube not on MCP for AlN-NT and BN-NT while HOMO is over MCP and LUMO is over NT for CC-NT. The polarizability of MCP-NTs is greater than that of MCP. Raman wavenumbers of MCP are enhanced in NTs, and hence, NTs can act as a sensor for the detection of MCP. Solvent dependency on adsorption behaviour is also presented in the manuscript, where we found that the AlN nanotube showed exceptionally high free energy of adsorption over other nanotubes in all solvent mediums. Solvation-free energies were also reported. Noncovalent interaction scattered plot also showed significant intermolecular interaction between AlN nanotubes and the mercaptopurine when compared to other nanotubes under study. To find the antiviral activity of MCP and MCP-NTs against antiviral activities, docking and molecular dynamics simulations were performed with 1HMP PDB. Recovery times show that MCP desorption occurs quickly. The MD simulations and docking results show that BN and CC-NTs with MCP show good activity as drug carriers.

A novel hybrid fluorescence probe sensor based on metal-organic framework@carbon quantum dots for the highly selective detection of 6-mercaptopurine

In the present study, MIL-101(Fe) and amine-carbon quantum dots (CQDs) were combined via a post-synthetic modification (PSM) method; thus, a novel MIL-101(Fe)@amine-CQD hybrid fluorescent probe sensor for the detection of 6-mercaptopurine (6-MP) was synthesized. Amine-CQDs as a fluorescent material can convert the bonding interaction between MIL-101(Fe) and 6-MP into recognizable fluorescence signals, and MIL-101 (Fe) as an adsorbent can pre-concentrate 6-MP. Hereupon, this new sensor demonstrates high selectivity and sensitivity towards the detection of 6-MP. The addition of 6-MP to this probe quenches the fluorescence signal at 599 nm. In this study, factors such as pH, response time, and concentration of MIL-101(Fe)@amine-CQDs were optimized by the one-factor-at-a-time (OFAT) method. Under optimal conditions, the relationship between the fluorescence enhancement factor and the concentration of 6-MP for this sensor in the range of 0.1667-1.0000 μg L^-1 was linear (R² = 0.9977, n = 3). The limit of detection and limit of quantitation were 55.70 ng L^-1 and 202.06 ng L^-1, respectively, which are better than similar techniques. The repeatability of intra-day and inter-day was 2.4% and 4.7%, respectively. This fluorescent sensor was employed to determine 6-MP in real samples and exhibited acceptable results.

Ratiometric fluorescent nanoprobe based on CdTe/SiO2/folic acid/silver nanoparticles core-shell-satellite assembly for determination of 6-mercaptopurine

A sensitive and robust fluorescent assay of 6-MP is described which relies on the facile assembly of a fluorescence nanoprobe by design of silica nanosphere encapsulated CdTe quantum dots (CdTe QDs) as scaffold, coupling with chemically tethered folic acid (FA)-protected silver nanoparticles (AgNPs) that function as responsive element. In this way a stable ternary core-shell-satellite nanostructure with dual-emission signals can be established. On binding to the target molecules, 6-MP, FA molecules initially occupied by AgNPs are liberated to give dose-dependent fluorescence emission, which can further form a self-calibration ratiometric fluorescence assay using CdTe QDs as an internal reference. The nanoprobe color vividly changes from red to blue, enabling the direct visual detection. The linear concentration range is 0.15~50 μM with the detection limit of 67 nM. By virtue of the favorable selectivity and robust assays, the nanoprobe was applied to 6-MP detection in urine samples, with recoveries from 97.3 to 106% and relative standard deviations (RSD) less than 5%. Graphical abstract.

Nanonetwork of Coordination Polymer AHMT-Ag for the Effective and Broad Spectrum Detection of 6-Mercaptopurine in Urine and Blood Serum

Nanocrystalline coordination polymers (NCCPs) have been considered as an incredible electrochemical sensor for the effective detection of biologically dynamic drug 6-mercaptopurine (6-MP). In the present report, a significantly stable infinite arrayed coordination polymeric network was self-assembled via metal with efficient organic tecton 4-amino-3-hydrazino-5-mercapto-1,2,4,-triazole (AHMT) in which silver(I) ions are coordinated by AHMT via hydrazino and exocyclic thiol linkage to form AHMT-Ag NCCP. An efficient and highly sensitive detection of 6-MP is attained owing to eminent electron channeling via polymeric nanocrystallite pores. An effective charge transfer leads to an interface of the AHMT-Ag nano-pores and electrolyte anchored electrode via π-π electron coupling and hydrophobic interaction. The voltammogram exposes acute redox behavior of 6-MP and discloses an impeccable illustration for the AHMT-Ag facilitated oxidation of 6-MP. This unique signature was applied in voltammetric detection of 6-MP in blood serum, human urine, and pharmaceutical formulation (tablet) by a considerable high sensitivity of 0.074, 0.058, and 0.036 μA/μM and a detection limit of 87, 97, and 37 nM, respectively. Thus, the prepared AHMT-Ag NCCP can provide a valuable platform for fabrication of highly sensitive electrochemical devices to assay biologically essential drug molecules.

Pharmacokinetic Profiling and Simultaneous Determination of Thiopurine Immunosuppressants and Folic Acid by Chromatographic Methods

With the increase in the number of medicines patients have to take, there has been a rapid rise of fixed-dose combinations (FDCs) in the last two decades. Prior to FDC development, pharmacokinetic properties of active pharmaceutical ingredients (APIs) have to be evaluated, as well as methods for their determination developed. So as to increase patient compliance in inflammatory bowel disease, three novel FDCs of thiopurine immunosuppressants and folic acid are proposed; physico-chemical and pharmacokinetic properties such as hydrophobicity, lipophilicity and plasma protein binding of all APIs are evaluated. Moreover, experimental results of different properties are compared to those computed by various on-line prediction platforms so as to evaluate the viability of the in silico approach. A simultaneous method for their determination is developed, optimized, validated and applied to commercial tablet formulations. The method has shown to be fast, selective, accurate and precise, showing potential for reliable determination of API content in proposed FDCs during its development.

A new insight of structures, bonding and electronic properties for 6-mercaptopurine and Ag8 clusters configurations: a theoretical perspective

Background

Many reports have also shown that the silver nanoparticles can effectively increase the anticancer drug activity and intensely enhance the drug curative effect. The adsorption of 6MP on nanomaterials has received a lot of attentions because of the drug coordination to its chemotherapeutic activity. The geometrical structures, chemical bonds, molecular orbital properties as well as density of states for the configurations were analyzed to deeply understand the interactions between the 6MP and Ag₈ clusters for high effect anticancer drug production.

Results

In this work, the density functional theory B3LYP has been used to investigate the structures and properties of the configurations between 6-mercaptopurine (6MP) and Ag₈ clusters using 6-311++G** level as well as an effective pseudo potential LANL2DZ. The geometries of ten configurations were optimized with full freedom. The geometrical structures, chemical bonds, molecular orbital properties as well as density of states for partial configurations were analyzed based on the density functional calculations. Polarizable continuum solvent model (PCM) in self-consistent reaction field (SCRF) were used for the aqueous calculations. The influences of temperature and pressure on the stability of the predominant configurations in the gas phase were further considered using standard statistical thermodynamic methods from 50 to 500 K and at 1 bar or 100 bar.

Conclusion

The result shows that there are ten stable configurations in the gas phase and there is a strong chemical bond between a Ag and S atom in the most stable configuration. The analysis of density of states also shows that the Ag–S chemical bond in the most stable configuration has been formed. Moreover, the results show that the temperature and the pressure will significantly influence the stability of the configurations in the gas phase. Additionally, when the solvent effect was considered, we found that there are only seven stable configurations and the solvent have different effect on various configurations.

Electronic supplementary material

The online version of this article (10.1186/s13065-019-0573-z) contains supplementary material, which is available to authorized users.

Electrocatalytic Imprinted Polymer of N-Doped Hollow Carbon Nanosphere-Palladium Nanocomposite for Ultratrace Detection of Anticancer Drug 6-Mercaptopurine

In this work, a nanohybrid-based imprinted polymer consisting of N-doped hollow carbon nanospheres and palladium is reported for the electroanalysis of ultratrace level of anticancer drug, 6-mercaptopurine, used in the treatment of leukemia. For this, N-doped carbon nanospheres decorated with palladium were first developed, and subsequently, a molecular imprinted polymer layer was grown onto their surfaces. The so-produced silica-embedded nanocomposite was made hollow by etching silica moieties with hydrofluoric acid. Finally, the whole system was doped on an ionic-liquid-modified pencil graphite electrode. The underlying synergistic effect of hollow carbon nanosphere-supported palladium nanoparticles inculcated electrocatalytic action. Notably, all rebinding sites in solid core-shells were confined within the shell, which hampers the effective diffusion of template. However, in this work, an effective diffusion of template across the hollow structure of inner and outer surfaces was observed. Consequently, this rendered approximately 2-fold heterogeneous rate constant as compared to the solid core-shell-based sensor. Differential pulse voltammetric transduction was used for ultratrace detection of 6-mercaptopurine through anodic stripping method. The hollow imprinted sensor revealed a linear dependence of current with concentration range 0.80-70.748 ng mL^-1. The limits of detection 0.11-0.22 ng mL^-1 were realized in water, human blood plasma, urine, and pharmaceuticals. Thus, the proposed sensor demonstrated an attractive sensitivity reproducibility, as well as endurance requisite for the treatment of leukemia patients.

A New Electrochemical Sensor for Direct Detection of Purine Antimetabolites and DNA Degradation

The development of a reliable electrochemical sensor using a hybrid nanocomposite consisting of ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) functionalized graphene oxide (GrO-IL) and gold nanoparticles (AuNPs) stabilized by chitosan (Chit) was described. The new sensor, labelled as GrO-IL-AuNPs-Chit/CSE, exhibited an improved electrocatalytic response to cancer drugs such as purine antimetabolites (6-thioguanine, 6-mercaptopurine, and azathioprine) in a wide concentration range with a low detection limit (20-40 nmol·L^-1, S/N = 3), and satisfactory recoveries (97.1-103.0%). The sensor has been also successfully used for cyclic voltammetric study of a salmon sperm double-stranded DNA degradation and DNA-6-mercaptopurine interaction in aqueous solutions (pH 7.4).

Resonance light scattering determination of 6-mercaptopurine coupled with HPLC technique

A simple, fast, costless, sensitive and selective method of resonance light scattering coupled with HPLC was established for the determination of 6-mercaptopurine in human urine sample. In a Britton-Robinson buffer solution of pH5.5, the formation of coordination complex between 6-mercaptopurine and metal palladium (II) led to enhance the RLS intensity of the system. The RLS signal was detected by fluorescence detector at λ(ex)=λ(em)=315 nm. The analytical parameters were provided by the coupled system, the linear of 6-mercaptopurine response from 0.0615 to 2.40 μg L(-1) and the limit of detection (S/N=3) was 0.05 μg L(-1). The presented method has been applied to determine 6-mercaptopurine in human urine samples which obtained satisfactory results. Moreover, the reaction mechanism and possible reasons for enhancement of RLS were fully discussed.

Fluorescence quenching and spectrophotometric methods for the determination of 6-mercaptopurine based on carbon dots

A carbon dot-based fluorescence probe was designed for detecting 6-mercaptopurine (6-MP) via fluorescence quenching.

Silver nanoparticles enhanced a novel TCPO-H₂O₂-safranin O chemiluminescence system for determination of 6-mercaptopurine

The present study deals with first attempt to introduce safranin O as the fluorophore for peroxyoxalate chemiluminescence system. The reaction of bis-(2,4,6-trichlorophenyl) oxalate (TCPO) with H2O2 catalyzed by silver nanoparticles can transfer energy to safranin O via the formation of dioxetanedione intermediate and emits orange-red light. The relationship between CL intensity and the concentration of TCPO, fluorophore, hydrogen peroxide and nanocatalyst was investigated. The Ag nanoparticles were synthesized by chemical reduction method and characterized using scanning electron microscopy, particle size analyzer and UV-spectroscopy. Moreover, the system was applied successfully to detect a drug, 6-mercaptopurine (6-MP) in pharmaceuticals. Under optimum conditions, a linear working range for 6-MP concentrations from 5.5 × 10(-7) to 5.5 × 10(-5)mol L(-1) (r>0.9831, n=6) was obtained with a detection limit of 1.6 × 10(-7)mol L(-1). The relative standard deviation for 6 repetitive determinations was less than 3.8% and recoveries of 98% and 103% were obtained.

Preparation, characterization and analytical application of an electrochemical laccase biosensor towards low level determination of isoprenaline in human serum samples

A novel electrochemical biosensor has been developed based on the immobilization of multiwalled carbon nanotubes (MWCNT) followed by sol–gel entrapment of laccase (Lac) enzyme on to the GCE.

Photocatalytic Decomposition of Methyl Red Dye by Using Nanosized Zinc Oxide Deposited on Glass Beads in Various pH and Various Atmosphere

Photocatalytic decomposition of methyl red (MR) as a pollutant in wastewater samples is investigated in this study. This photodegradation was investigated in water in neutral, alkaline, and acidic media under external UV light irradiation by zinc oxide nanosized catalysts on granule glass. The effect of four atmosphere types including air, nitrogen, oxygen, and argon was investigated. Finally, it was found that photodecomposition using nanosized ZnO layered on glass is a new alternative route for efficient wastewater treatment. The results showed that the titled dye is degraded by various rate under different atmosphere and pH.